I run a small coffee shop and want to offer free wifi to my customers while also having a secure network for my point of sale/internal network. What is the best way to do this on a limited budget? And what is the best way to protect the secure network?
View 1 RepliesI am actually able to have fun surfing on the Net with this toy computer, provided I don't expect to watch videos or listen to music or download anything. I bought it for a few Euros in France where it is known as the "SurfOne mini PC Ref. INOS1CE"; I think it is the same as the Chinese "OEM mini laptop netbook". It has a 7" screen, a 2 MB memory and claims to run on Windows CE 6.0.My problem is that after successfully connecting via WiFi to my "Orange Livebox" modem and router for a few days, I then lost that connection and can connect now only by cable.When I turn on WiFi power, it recognizes the "Livebox", but then states that it is not receiving any signal and the connection fails. How to restore WiFi.
View 1 Replies View RelatedI am looking for a simple First name, surname and email in exchange to unlimited free access to our wifi. Would want the data to load on to Infusionsoft?
View 1 Replies View RelatedI have windows 7 however, the other 7 all have Macs. What is the easiest way to set up file sharing so that all 8 of us can have secure access to a hard-drive so that we may all access music, pictures, and files specifically stored to that drive only. We do not want to grant each other access to our internal drives, only a network drive. I would like this shared drive to be secure.
View 4 Replies View RelatedI just moved and my set up disc for my WRT54GS2V1 is in some box in some abyss at this point. My network is not secure and I want to secure it. My linksys also runs my cable. How do I make my network secure? I have Vista (not sure that matters) and a PC. I tried to follow some instructions here but I typed in IP config in my top bar and didn't get any local address..
View 3 Replies View RelatedI need to secure the wi fi and I'm not sure how to do it.
View 1 Replies View RelatedI whish to connect the two switches shown below.The distance between them is 50m (~54 yards), one floor apart, and I would like to link them with the cheapest optical solution possible.I have been given a solution with 19inch patch panel, splitter, pigtail cords, patch cords, SC connectors, i.e., the lot.Not being an expert in networking, I feel that is an overkill solution.
Servers______________________________________ Devices/Other Switches
| ___________________________________________________|
| ___________________________________________________|
V ___________________________________________________V
(SLM2048-EU-SFP port) <----------------------> (GBIC port-CISCO 2950 Series)
^
|
|
SAN
Any cheap outdoor extension antenna that works with a Linksys wap54g? Not looking for anything too expensive. Just trying to bring wifi signal into a building.
View 1 Replies View RelatedI am working on an Acer netbook One series ZG5. The issue is that it will not connect to a wireless network if any of the security authentication protocals are activative. It will connect and operate fine via the hardwired RJ45 ethiernet connection. If I set the network up on the wireless router to an open network I can connect to it just fine. I have no issues opening IE8 when connected to an unsecured network. This box did work until I was reimiaging an desktop that had issues and used a usb thumb drive to store files from the desktop to the netbook prior to wiping the desktop.
View 14 Replies View RelatedThere are free vpn services. When the vpn adds a pad lock to the network icon, is it then secure to use it on insecure networks like public wifi to get internet access? I mean, the password is given to you from the vpn provider's website.
View 7 Replies View RelatedI have a linksys router and a time warner modem, we have not had any problems until the past month, and the problem gets worse every day. Our secure WAP2 comes unsecure and changes to the name "linksys". The connectivity has been 2 bars at best, and out lap tops, and iphones will not stay connected to wifi. occasoinally my iphone says it cannot find the network. this happened with our Iphone 3 and 3GS, and now our new 3GS and 4. all software on the computers and iphones is up to date, and we are one room away from the router and modem
View 2 Replies View RelatedI want to setup secure Wi-Fi on my Beetel ADSL modem/router. What are the parameters which I need to setup through the modem web interface?
View 1 Replies View RelatedI am trying come up with a setup that allows for a computer to simultaneously be connected to the web via a secure wireless network and to provide a shared drive via an unsecured (possibly ad hoc) wireless network.Which is to say, the computer needs to be able to use the web wirelessly via the secure network, and people need to be able to share files with it wirelessly whether or not THEY can use the secure wifi.One last requirement is that I need a this to be something that I can set up in a given location with no more configuration than required to connect to the secured wifi - if the setup requires me to mess around with the configuration of the router for the secure network itself, it won't work.
View 5 Replies View RelatedWhen setting up my e1000 router for a secure domain it automatically opened a non secure one that my neighbors are using. How can I cancel it?
View 2 Replies View Relatedi have a Linksys modem BEFSR81 v.3 and am trying to reset my wifi password for secure connection. When i log into the the admin page, to my surprise, I could not find the security feature to create WPA or WEP password. i'm stumped. This has never occurred to me before on this modem.
View 6 Replies View RelatedI'm a head of computing at a senior school and currently have the following predicament. All of the computers we have are quite rightly networked with certain restrictions on them. Now I have just purchased seven machines for my departments use alone. All other computers in classrooms are for general use and have to be usable by any teacher for any subject. The machines I have purchased are so we can install whatever hardware / software I need with no restrictions. These machines don't need network file shares or printer access,the only shared service they need is the schools internet connection.Originally I had a router plugged into a printer port and created wireless network in my room which gave us this functionality - full unrestricted internet access, could download exes and visit any site. However the network admin (and I understand why) didn't like this and asked me to remove it. So now I have some nice machines with no internet access. When I asked the network admin what we could do about this while keeping his networked machines safe, he said it would be a long process as we would have to buy in an entirely new internet connection.
View 4 Replies View RelatedHow do you assign each customer to a vlan ? and what kit do you use at the core to roll out VLANS to each pop? We are thinking of using Juniper kit - putting customers on there own VLAN, and having a managed service like TR-069 on those VLANS.Is it do-able and what does everyone use for a TR-069 server - I've been looking on the net and havent had much joy in finding a server - or is it not as easy as I understand it to be.
View 4 Replies View RelatedI need two vpn tunnels from one ASA5510 to two customer endpoints but with the same host on the remote side, the two tunnels are for redundancy reasons. Can I just configure two tunnels with the same host on the remote side and assume the ASA will understand to just use one of the tunnels when both active or the one left when one is down? Or do I need extra configuration for that.
View 1 Replies View RelatedWe have a new remote site for customer which only have 3G connection and to add more pain to that they have dynamic IP address.the easist possible solution was EZY VPN.....client has 2800 router with 3G and at our end we have ASA.....the issue is that , that always server (clients nehind) asa initiate connection to the remote site ie to 3G.....the rule of thumb is that whenever client(ie EZY VPN) will initiate conection the tunnel will establish.
View 1 Replies View RelatedWe are upgrading a customer network and have found that users of a particular application [which is very bursty/bandwidth hungry] have experienced a marked performance drop. I see lots of output drops on the interfaces. This is only happening on 2960S-48 the rest of the users on 2960PSTL [all PoE] are not having nearly as bad a time.I have tried various QoS configs with little success. I have seen on some other blogs that the 2960S has less buffers than the rest of the family.
Removing QoS or upping the users to 1Gb cures the performance problem.
I'm part way through trying to set a Catalyst 4510R to factory defaults, One thing I'm stumped on is how do i remove the Customer Disclaimer eg what commands do i need to remove this and any other customer text within the switch, below is copy of text from the switch with customers details omitted.
View 5 Replies View RelatedI have a Cisco 3750 switch stack and am performing QOS against a number of SVI vlans on per customer basis. I have 8 customers, each with a /29 public subnet and each with an SVI as a gateway within that /29 range. I then have a "routable" SVI vlan for routing upstream to the internet. [code]
The service policy attached to the interfaces above is supposed to perform policing on download and upload traffic. The service policy is attached to the Routable VLAN for download policing and the Customer VLAN for upload policing. For example, traffic entering the routable VLAN will be policed based on traffic matching an access list to the customers IP range (download). Traffic entering the customer VLAN will be policed based on traffic matching an access list from the customers IP range (upload).The command I am using to police is as follows - police 10485500 966080 exceed-action drop.The problem I am experiencing is traffic into the routable VLAN is being successfully policed down to the 10Mbps i have specified on a per customer basis (download).Traffic entering the customer VLAN is NOT being policed at all (upload).I am limited as to the use of the parent policy map I have specified on the interface, as I can only assign it in one direction (input).
one of my customer has CSACS & has bought CSACS-5-BASE-LIC, at the time of registration i ,had put the end customer as my company, how to change the end customer details on the license.
Had sent a mail to licenseing@cisco.com, they changed the end user details at there end, but the same is not reflecting on the physical box at the customer site.
We use a Flex7500 with local switching and centeral authentication. My question is can i use the Customer's radius server in order to authenticate? or should my WLC have IP conncetivity to any radius server im adding?I guess what i'm really asking is should my WLC know the radius server or does the request can go back to the AP and from there to customer radius on his subnet?
View 6 Replies View RelatedWe have Cisco 4507-R installed at customer site which got hang twice and became normal after getting booted.I have analyzed show tech-support for this switch after reboting but not found relevant logs for hang issue,
View 7 Replies View RelatedI am a beginner, and my customer complaining about the internet connection performance which is very slow, the network description is given below:
Description:
The building has four floors and each floor has one mount rack which contains one 26 port switch + 16 port switch. and each floor has 32 pc as well.
- 4, Cisco SR2024 un managed switches.
- 4, Cisco SR2016 un managed switches.
- 1, Cisco access point for internet connection.
- 1, Active directory server.
- 1, Mail Server.
- Internet ADSL connection, 1 MB speed.
This is the current topology.
*Note:The links and cable type "100BASE-TX under Cat 5" among all switches.
*Note:Whenever I connect to the main router "Access point" the internet becomes very fast.
what i got is an internet connection from a network socket in my room where when i conect my computer to it and open a browser i need to enter a username and password in. once my connection to the net has been idol for 30 mins or my computer is switched off i then get disconnected and have to sign in again via my web browser.
what i want to do is stick my router in to that connection and then connect to the net wifi style with my i pod/wii/phone/ laptop ext ext.
how i do this without having to keep my pc switched on.
I am trying to use a booster to get wifi in my shed... I bought a hawking Hi gain 14db directional outdoor router and a Linksys 54g as well... I connected the linksys to my router and the booster to one of the Linksys antenna ports... But it won't transmit... I get the Linksys network, but I can't browse the internet with it...
View 10 Replies View RelatedI just bought a laptop and in set up it's asking me set up my security key. How do I find that?
View 1 Replies View Relatedhow to access lava b8 wi-fi setting and open the web pages
View 1 Replies View RelatedHow to put password on my router wifi
View 3 Replies View RelatedI've just purchased an asus tf300t. It ways that my wi-fi signal is strong, but authorization fails. How do I get back in to change the password and see if that makes a difference?
View 1 Replies View RelatedI want to setup two WIFI network with one Router at home.
View 2 Replies View Related