used to be able to access pc usieng fing now can not access used fing.Accessed a win 7 client with my android. Reset the router now i can not access the win7 but able to access 2vista a different win7 pc and able to access other devices on nerwork. Can see the win 7 machine in question but can not connect with samba client.
View 2 RepliesI have two ASA5505 with a site to site VPN.One of the ASA is connected to the internal network 192.168.150.0.The other one is connected to 192.168.151.0.
I have also configured IPSec Cisco client VPN to the one which is plugged to 192.168.150.0.
I would like to know if it is possible for a client connected with the Cisco VPN to access the network 192.168.151.0 through the site to site VPN.
I´m tring to configure ASA 5505 with VPN Cleint, to access a remote network over a L2L with another ASA 5505, but no sucess. Is there any special feature to this work?
View 2 Replies View RelatedI'm trying to set-up 3 remote access groups on an ASA5520 running version 8.4(3) software so that remote clients connected via Cisco VPN Client can also access spoke networks which are also connected to the ASA. I've previously set this up on ASAs running v7.2 software without issue but don't seem to be able to do the same here and can't for the life of me figure out what's wrong!
I have set-up the 3 remote access groups:
Group 1 - subnet 192.168.1.48/28Group 2 - subnet 192.168.2.0/25Group 3 - subnet 192.168.3.0/25
My remote access user groups can all connect to the head office subnet (10.0.0.0/8) without issue. But only one of the groups (192.168.1.48/28) appears to be able to access the spoke sites (172.30.10.0/24 and 172.30.20.0/24) that I have set-up. However, I can't see what the difference is between the 3 groups I have configured so can't understand why it works ok for one group and not the others?
When I use the packet tracer, it tells me that the flow is being dropped at the VPN encryption phase but why is that? How can I find out more? Here's the relevant config on my ASA:
!same-security-traffic permit intra-interface!crypto dynamic-map remoteuser 5 set transform-set ESP-3DES-MD5crypto dynamic-map remoteuser 5 set security-association lifetime seconds 28800crypto dynamic-map remoteuser 5 set security-association lifetime kilobytes 4608000!crypto map outside_map 65000 ipsec-isakmp dynamic remoteuser!ip local pool pool1clients 192.168.1.49-192.168.50.54ip local pool pool2clients 192.168.2.1-192.168.2.126ip local pool pool3clients 192.168.3.1-192.168.3.126!access-list split-tunnel-pool1 standard permit 10.0.0.0 255.0.0.0 access-list split-tunnel-pool1 standard permit 172.30.10.0 255.255.255.0 access-list split-tunnel-pool1 standard permit 172.30.20.0 255.255.255.0 !access-list split-tunnel-pool2 standard permit 10.0.0.0 255.0.0.0 access-list split-tunnel-pool2 standard permit 172.30.10.0 255.255.255.0access-list split-tunnel-pool2 standard permit 172.30.20.0 255.255.255.0 !access-list
[code].....
i currently have a netgear wgr614v9 running the most recent firmware update and a tplink nr741nd running the latest dd wrt firmware.the netgear is my main router connected to the modem positioned in the living room attached to this is a wired ps3, wii and various laptops connect wirelessly to this. In my bedroom i have the tplink router is is setup as a client on the netgear router allowing media network drive access to the internet.
eg.
--- wired
~~~ wireless
modem-----netgear~~~~~~tplink----network drive
What i would like to achive is to be able to connect to the netgear router wirelessly and have access to the network drive attached to tplink router.I have tried a client bridge on the dd wrt firmware but this does not work at all. I have read that i need to setup a VPN on the dd wrt but i can find anything on how to do this when trying to access a drive on a second level.
We have two sites connect with an IPSec L2L VPN.
-Site A: 192.168.13.0/24
-Site B: 192.168.2.0/24
On both sites we have a ASA5505(Base license) to terminate the tunnel.On Site B we also got a remote access vpn to which we can connect using the vpn client.The lan2lan tunnel works fine and so the remote access vpn.Now i want to connect to Site A using my vpn client connected to Site B. [code] There are no vpn-filters or other special policys in place..If tried to ping from my vpn client to Site A while i was debugging ipsec 255 on site B: the asa matched the l2l-tunnel for traffic sourced from 192.168.25.x to 192.168.13.x but when im doing a show crypto ipsec sa detail there are no packets getting encrypted..so of course no packets reaching my asa on site a.
I have one user who is unable to Access Remote Network resources when connected to the VPN on his home network. VPN shows connected and he is given a remote IP from the VPN Pool, but he cannot ping any IP on our network. When connected using Sprint Wi-Fi card he is able to connect and access remote network from the same laptop. Maybe there is some network overlap that I am missing.
see attached firewall config (zzz... being firewall public IP) and remote user route table. ASA 5505 VPN Client 5.0.07.0290
I have configured Clientless SSL VPN for access to ASA 5540 internal network. Still I am unable to take ssh to my core switc [code]
View 5 Replies View RelatedI have a Cisco 881 setup with the following VPN config.
[code]...
The client is able to connect just fine to the network via VPN, but I am unable to gain access to any of the local resources. I know 192.168.1.1 has SSH running and 192.168.1.50 has telnet running but if I try to connect to either using the correct program they just timeout. I am really at a loss on why the vpn connection connects but I can not gain access to any of the resources on the VPN network.
Using VPN client 5.0.7 Able to get vpn ip address But cant access remote desktop or any network inside, I was able to access before But I dnt known what changes happen on my laptop which is unable to access now ,I have reinstall the client again but no use' Able to access the same vpn & rdp with another laptop & also other users can access' Except my laptop What can be the issuse with my laptop.
View 1 Replies View Relatedwhy my client can't internet access from my config
(INTERNET)-------->[ROUTER]---->[CLINET]
Clinet :
Ubuntu LTS 12.04
IP 192.168.100.2
Netmas 255.255.255.0
Gateway 192.168.100.1
DNS Server 202.134.1.10
i have server 2008 machine..how can i access windows 7 as client system?
View 1 Replies View RelatedI had an odd occurrence today on my network. One particular desktop running Vista could not access secure websites (httpsremoved the DHCP lease on my server (Windows 2008), let the desktop pick up a new address and all is good nowThis is a production network (domain) environment
View 3 Replies View RelatedI'm trying to solve a disastrous networking (via workgroup nightmare) and I cannot enable the DNS Client on my Windows 7 PC. I go to cntrl panel, admin services, dns client, and try to change it to automatic and it says "access is denied"
View 1 Replies View RelatedCompletly new to Cisco ASA and need to get this working ASAP.ASA 5505 8.4(1) is the secondary FW and I need for it to allow everything going out and block everything coming in but for the VPN clients. Since a Cisco moron, I used the ASDM and it's wizards to make this work, which might explain my situation.
[code]....
My Cisco VPN Client connects to the ASA and receives 10.10.101.1 IP address, but I get no connectivity to the ASA or any other 192.168.101.x server or service (tried telnet, RDP, ping, etc.)
I've found that my clients can NOT access to my ASA 5510 with their Cisco VPN Client Ver 5.0 through IPsec over UDP.By comparing my new running config with the old one I found some strang following configuration: [code]
We have 3 diffrent IT expert who have access to our router and I think this configuration is cause of our VPN access problem.Is it really because of that or something else.Any way I want to know how can I get rid of these configuration?
There is a Cisco VPN client (running on Windows 7) and an ASA5505. The goals are client could use remote gateway on ASA for Skype and able to access the devices in ASA inside interface.
The Skype works well but I cannot access devices in the interface inside via VPN connection. Following is the config, how to correct NAT or VPN settings?
ASA Version 7.2(4)
hostname ciscoasa
domain-name default.domain.invalid
enable password wDnglsHo3Tm87.tM encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
[code].....
I have A setup in different location with the the ASA Firewall with VPN enabled and a Print server. on Network B i have a server with 2008 installed and its my NAT server, DNS and File server.Now the Client on Netwrok B wants to access the Server in Network A Remotely through VPN they could connect to but cannot user Remote Desktop either its Ip translation issue or i dont know.
View 2 Replies View RelatedI configured a dynamic vpn(easy vpn) in a cisco isr. But the vpn clients cannot access any of the lan devices. VPN pool is 10.0.0.1- 10.0.0.20 & internal netwrk add is 172.17.x.x. I tried to disable zone based firewall but no resultout[CODE]
View 1 Replies View RelatedI want to set up our ASA5505 firewall to allow access from the Cisco VPN Client software.I have nstalled the client software then tried using the VPN wizard to set up the connection without success, I am running Windows 7 32 bit and Cisco client 5.0.03.0530. [code]
View 22 Replies View RelatedI want to connect my clients from the Windows WS to a VPN Tunnel using 3925 router w/o Cisco VPN client. Is there the way to use native IPSec client on Windows XP or Windows 7?
View 1 Replies View RelatedWe have just finished installation of 12 AP 1552 as access points , clients are 7925G phone , after installation and configuration all clients can register and access to AP's in wireless environment but in IP we can't access to phones from our servers.For your information all phones and AP's and Ct5508 Controller are same subnet .We need install and configuer all 1552 just as Access points in 2.4Ghz , we don't need any mesh configuration.As for test we tried to connect to network by Laptop PC , it connected to access points but no network .
View 5 Replies View RelatedI have an ASA 5505 that is on the perimeter of a hub & spoke vpn network, when I connect to this device using the VPN client I can connect to any device across the VPN infrastructure with the exception of the sub net that the client is connected to, for instance:
VPN client internal network connects to 192.168.113.0 /24 and is issued that ip address 192.168.113.200, the VPN client can be pinged from another device in this network however the client cannot access anything on this sub net, all other sites can be accessed ie. main site 192.168.16.0/24, second site 192.168.110/24 and third site 192.168.112/24. The ACL Manager has a single entry of "Source 192.168.113.0/24 Destination 192.168.0.0/16 and the "Standard ACL 192.168.8.8./16 permit.
My network connection was vanish the client are not connected to server and the computer cannot access internet
View 1 Replies View RelatedRecently a router crashed and some suspicious about the client arised. The point is that now the order is to deny all kind of router admin access for the client. I was thinking, is this a good idea or will be better to give him limited access to the router, to avoid the client to try to access the router at all cost? Something like to stop the motivation to crack the router password.
View 7 Replies View RelatedOn my Windows 7 laptop, after connecting to my office Network using Cisco VPN clientThe entire Internet is utilized by the VPN. I am unable to browse the internet on my computer till I disconnect the VPN Client.
View 3 Replies View RelatedI am having asa 5520 in my head office and in branches 2811 routers.i connected two branches with my HO through VPN.now i configured remote vpn client in HO asa . now i need to access all the branches using this remote client.how i create route in HO ASA.
View 7 Replies View RelatedI have a 2811 Router (config below) with VPN configured. I can connect through the VPN and access devices on the native VLAN but I can't access the 10.77.5.0 (VLAN 5) network (I don't care to access the 10.77.10.0 - VLAN 10 network). This issue has been plagueing me for quite a while. I believe it's a NAT or ACL issue. VPN client IP pool is 192.168.77.1 - 192.168.77.10. [code]
View 4 Replies View RelatedI'am using ASA5510 and I configured a VPN IPSEC. When I connect to the vpn with a windows client ( using windows vista) , I have access to the network ressources but when i want to go on the Internet it doesn't work. (particulary with Internet explorer, it works with Firefox!) Furthermore,On other windows client I haven't this problem.
View 4 Replies View RelatedTrying to setup client VPN access on a 1841 router. essentially i would like to connect using the cisco vpn application.
View 2 Replies View Relatedwe use the Cisco VPN-Client to connect to our CISCO1921 Router and want to go out again on the same interface to the internet. We configured the connection with the IOS scurity package, have no split tunneling - so the client is forced with it's default gateway to our router - we also have pushed our local dns-server to the client and he gets dns results. Now I think we have to got out with some kind of NAT, because our client has a private IP from the IPSec Client pool. At the moment we have no NAT inside/outside, bacause we only use official IP addres in- and ouside (data-room usage).
- Is it possible to get the NAT function going in and out on the same interface with crypto_map IPSec user comming in and going out to the internet ?
- Is it more secure to configure this with vrf ?
- Has some a link to example configurations for this ?
I purchased a RV042 V03 router with firmware version 4.1.1.01-sp (Dec 6 2011 20:03:18) and I need to create a VPN connection through a remote client. I added a new tunnel in the "Client to Gateway" section, so I created a VPN client access, but connecting remotely by the QuickVPN Client after the connection and testing of the network I get the error "the remote gateway is not respondig, do you want to wait?" and I'm not able to establish a connection to the network. I can provide remote access directly to the router and the IP address to connect remotely.
View 3 Replies View RelatedI am using Cisco configuration professional to set up one easy vpn server on 887-K9,vpn client can dial up the server successfully but can only ping router but on other lan. Looks like there is a nat issues between lan and vpn client?
View 5 Replies View Related