Cisco :: VPN Client Connects Externally
Jun 13, 2012
We have a few users connecting to another companies Firewall using the Cisco VPN Client, we are pretty sure our PIX (sat at the edge of our network) is causing issues whereby after an unknown amount of time the VPN client will timeout and lose connectivity.I did outputted some level 7 debug to syslog and I cannot see anything that happens during the time he has lost connectivityI can see his RDP packets getting denied to the remote ends private IP address but nothing that shows a denial or a drop of anything from our pix.We are sure its this pix as we used to connect via a different route and a different pix and it never dropped
View 2 Replies
ADVERTISEMENT
Sep 23, 2012
Client connects to PIX 501 but cannot see the LAN in Windows Explorer.Devices can be pinged by IP and hostname (netbios name)I can navagate to a server by typing in \servername.Why can I not get a resolution from Cisco techs? [code]
View 1 Replies
View Related
Feb 2, 2011
After trying to configure remote client VPN access to a Cisco 2911 ISR using the CLI I tried to use the Cisco Configuration Professional. However, either way I have the same problem. A client can successfully connect and access servers but just once. When the client disconnects and tries to connect again there is no access to the servers even though the VPN tunnel appears to be up. I've tried multiple versions of the Cisco vpn client SW and all behave the same: 1st connection can access servers, subsequent connections can't. I've also tried a second (different) client after the original connection and still no luck. If I reload the router the client can get the vpn connection and access the servers but if the client disconnects from the vpn and tries again there is no access to the servers.
I've also tried it with and without NAT but it doesn't seem to make any difference.
The config generated using CCP is as follows:
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
[Code].....
View 4 Replies
View Related
Feb 13, 2013
I have one user who is unable to Access Remote Network resources when connected to the VPN on his home network. VPN shows connected and he is given a remote IP from the VPN Pool, but he cannot ping any IP on our network. When connected using Sprint Wi-Fi card he is able to connect and access remote network from the same laptop. Maybe there is some network overlap that I am missing.
see attached firewall config (zzz... being firewall public IP) and remote user route table. ASA 5505 VPN Client 5.0.07.0290
View 5 Replies
View Related
Jan 29, 2011
I have a home pc running Windows 7 ultimate that I can't connect through RDP/VNC from an external network. I can connect internally from an other computer connected to network though.
1.Remote Assistance is allowed with "Allow connections from computers running any version of remote desktop" selected.
2.Network Discovery is turned on.
3. Accept incoming connections in TightVNC checked.
4. Ports 3389, 5800, 5900 forwarded to my internal IP hosting VNC/RDP servers which is 192.168.1.64 inside my router. Also have tried putting computer/private IP into DMZ Mode which made no difference.
ISP: AT&T DSL
Modem/Router: 2wire 2701HG-B.
ports forwarded: 3389, 5800, 5900 to computer hosting VNC/RDP server
Windows Firewall: Off
security software: None
I've also had my friend try to RDP/VNC to me and it didn't work. I have registered with [URL] and have the dynamic dns update tool installed on the same computer. Tried to access with my no-ip.com name but that doesn't make a difference.
View 6 Replies
View Related
Apr 29, 2011
I just finished setting up VPN server on my Windows 2008 server. I defined the users that should be able to access the server and applied permissions. When I test the VPN connection on the LAN (loacally) I have no trouble connecting and establishing VPN connection.However when I tried externally it's a different story. I am not able to connect and always get the same not so clear 800 error ...The remote connection was not made because attempted VPN tunnel failed. I have Zyxel router for my internet connection and I have forwarded all relevant ports I think for the protocols I am using. Port such as 1723,1701,1702,47,50,51,500,1293,443,4500 are forwarded to the server.I am able to telnet to the server on port such as 1723.
View 1 Replies
View Related
Sep 4, 2011
I have various wireless devices in the house, some of which (smartphone and Windows 7 laptop are working fine, but all of the devices using my WET610N can only see devices in the house, not externally. I also tried updating the WET610N to latest firmware (1.0.04) but still no luck. Has something changes in the WRT610N configuration panels that I need to turn on to allow this?
View 9 Replies
View Related
Apr 20, 2009
We are using an ASA 5510 and remote access (SSL VPN) using the AnyConnect client.
Is it possible to display a user message when a user connects using the AnyConnect client, matching a specific dynamic access policy? Can the message be displayed when the action is "Continue" rather than "Terminate"? I can't seem to get this to work and wondered if there was a LUA function to do this.
We have a DAP which gives a restricted ACL when the user's anti-virus is out of date, and I wanted to notify the user to update their anti-virus and reconnect.
View 4 Replies
View Related
Mar 20, 2012
i have a question about tunneling a software EasyVPN client to a client ASA Network. It looks like this:
EasyVPN Server 192.168.202.0/24 Network extension mode to Client EasyVPN ASA 192.168.1.0/24 This works fine in both directions. But now i want to connect the client ASA network via EasyVPN software client from outside. The user are already able to connect to the ASA Server on its static outside IP obtaining an IP from a 192.168.21.0/24 pool. This works fine. But how am i able to connect to the 192.168.1.0/24 network from this client?
View 5 Replies
View Related
Apr 18, 2013
how to make the java SSH thin client applet bigger in SSL VPN Clientless portal?It works and all that but the window is literally half the size of the monitor and unworkable. You can't even hit tab! (tab moves focus around the browser...)I am using the latest java applet (Oct 2012) and ASA OS 8.4(5)
View 3 Replies
View Related
Apr 21, 2013
Do the problem caused by the modems itself or it just sign of faulty Ethernet switch (using 20 port Allied Telesis ethernet switch).
Sometimes I cannot connect to internet due to "unidentified network" buy i can resolve this problem by restarting my modem + switch.
View 4 Replies
View Related
Apr 29, 2011
A former coworker of mine setup VPN capabilities to our office network shortly before he left. It is no longer working. We can connect to VPN but I'm not able to ping any devices on the remote network or Remote Desktop to any of the server. After 30 minutes, the VPN connection drops. I have attached our ASA 5505 config to assist in troubleshooting.
View 3 Replies
View Related
Feb 14, 2013
I have a 2811 that I can remotely VPN to using Cisco VPN client however I cannot see the internal admin network (10.35.5.0).
Current configuration : 4845 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
[code].....
View 2 Replies
View Related
Jul 11, 2012
This PC is connected to a Press machine in our Production area (Lan only with machine and PLC's) so I disable the LAN to the press then the 3G connection comes up with bps activity. I want to use teamviewer on the PC for remote support but teamviewer is unable to connect like it use to and its a free license. I tried internet explorer and "page cannot be displayed". There are no special proxy settings and DHCP IP. ( Windows XP with admin rights)
Whats confusing is even if the lan is disabled, the 3G connection would only come up now and then, but then I could add. The PC has viruses and very slow at the moment and I have loaded free AVG just to scan and clean some to see if it works. I cannot format the PC or something like that because there is production software and applications on with special settings that runs the R10 000 000 press machine and if the PC stops... trouble :/ I have ordered new PC for the press machine 18 000 Euros but that would take 12 weeks to arrive and if I could get the connection internet working on the machine it would be great.
View 5 Replies
View Related
Mar 25, 2013
I have Cisco 1252 APs in my network and also a WLC with software 7.0.98.0 and a WCS system. In certain areas I have an SSID with 2 or more APs configured as part of the group. Some users are connecting to the SSID on the weaker AP when there is a much stronger signal available from a different AP.I have looked into this issue before and have been told it's a porblem with the client's Wireless NIC or the drivers. The issue is I'm using the most updates drivers on some users and it makes no difference. Although it may be a problem with my clients I need to fix this on Cisco's AP side. What are my options? I believe MAC filtering is only per SSID so that would defeat the purpose, can I filter by specific AP and still allow the user to connect to the SSID? Or should I seperate the APs from the 1 SSID and create multiple SSIDs so the user can select the stronger network?
View 4 Replies
View Related
Mar 24, 2013
We recently moved our network over to RV082 router and its working great, well now we want to take advantage of VPN for our sales staff.
I was able to setup the VPN and using a PC at a remote office I can launch the quick connect and it connects right away, RV0 even shows the user connected. However the user cannot ping anything on our network via name or IP, connect to any resources, etc...
My understanding was when the client VPN would connect the user would get an IP from DHCP (this is on our Server 2008 DC) and they would be using that address, but when I run IPCONFIG on the client PC they just have there standard IP from remote office.
View 8 Replies
View Related
Nov 21, 2011
I've got a VPN setup on an ASA 5510, it connects fine and my users, and myself are able to remote desktop, and ping. However, when accessing the servers by hostname I get nothing. When I want to access a fileshare I have to do it by IP. I've got my internal DNS added in the config.
View 3 Replies
View Related
Feb 23, 2011
is it possible to setup a Cisco ISR 881W so it connects to a Cisco ASA 5500 series head via network extension mode? We did this in the past with our PIX connecting to 3000 series concentrator.
View 1 Replies
View Related
Aug 22, 2011
I am able to connect to the RVS4000 remotely using QuickVPN, and can stay connected, however, once connected I cannot use the internet or see any of the remote computers via the network.
View 3 Replies
View Related
Jul 11, 2012
Its actually owned by the charity that i volunteer for and is connected to their private network and the internet ,When the user logs on in the morning, the laptop will not connect to the internet, it will also not connect to the shared network drive, so i can assume theres a local connection issue too,the user has to restart the laptop several times before the laptop will connect.
View 5 Replies
View Related
Feb 21, 2011
I recently got a computer, and it's all running fine, except for the internet.My internet connects through wireless to a box, I have no idea what you call it. Router?The house has three active laptops, all of which are working perfectly fine. This new computer,however, is a desktop, and I am trying to connect to my house's internet through a USB stick device that transmits the signal (D-link, model DWA-110). I know for a fact that this device works for two reasons. Firstly, I've used it in another laptop, and more strangely, it works on this new computer sometimes too.After about half an hour of random methods to make a connection stick, it might connect. And it lasts until the computer goes to standby, or is turned off. This is just random stuff through the network and sharing centre part of the control panel.Nothing ever works twice, and I haven't been able to replicate it for about a week. It successfully connects, and the connection is real because I can access the internet momentarily. But it always just disconnects again. I've tried it in every USB port, too.The signal strength is excellent, and when it connects it works great. It just almost always fails to.
View 1 Replies
View Related
Feb 15, 2012
I have broadband with a d link dir 601 router hooked to it.it's about 2 years old. My sons computer is straight hooked to the internet while I use the wireless in another room.I have no problems with it until about a month ago, my daughter comes over with her laptop and uses the signal, then all of a sudden it takes pages etc on my laptop forever to load. I have windows xp on mine, she has 2 laptops she switches from, 1 with xp,1 with 7.
View 3 Replies
View Related
Apr 16, 2013
Sometimes my DSL can't connect and I have to wait until it fixes itself.Is there any way I can fix it by myself. I've tried to reset the router but it doesnt work.
View 6 Replies
View Related
Apr 14, 2012
My HP laptop connects to our wnr0003(or whatever it is) router but it says local only. When we took it to best buy, it connected there to the Internet oddly. And even odder, last year we had THE SAME router and it DID in fact, connect to the Internet, using the same router and all. So my question is, how do I fix this?
View 8 Replies
View Related
Oct 31, 2012
So the best way to explain this is if im on the internet i wont really notice it because it happens so fast and im on the page. also its wireless internet.If i play for example league of legends il be fine then il be reconnecting then im back but the reason im reconnecting is because my connection dropped for a second.IF i open say an online game and i open a stream watching someone. Either the stream will turn off or the game will disconnect or ill get kicked from both.Ive gone into command prompt and done ping google.com and stuff sometimes its perfect then i do it again it misses 2 with time out then i do again its perfect then again time out again time out then perfect its really annoying.I recently started playing a new game and il be running then disconnect from the servers because my connection dropped for a second and ive rang bt and stuff have 2 new hubs. switch phone lines replaced filters still dont know whats going on.
View 1 Replies
View Related
Aug 9, 2011
I have a wireless router with my sky broadband account.My computer crashed and when I repaired it without losing files etc, it wiped the system clean.I had to go from Vista to XP as the pc never had a recovery disc with it.I have also recently upgraded to Windows 7 extreme, however the problem remains the same in that, the pc will not detect the wireless router. However, my dads laptop which I am using now, DOES connect to the internet.I have spoken with Sky support and after going through all the usual checks and tests, they have decided it is a pc fault.
View 3 Replies
View Related
May 9, 2012
I have 3 computers running Windows and 1 running XP Pro.ISP is Charter. All these were connecting fine until Tuesday night storm came through. Power was out for a while due to a power pole being knocked down. Cable was on this same pole I think. Next day none of my computers could connect wireless.Used Ethernet cable direct to modem and finally got connection. To make a long story shorter, I find that now I can only connect unsecured or WEP. Can't connect using WPA2 at all.I wonder if it is possible that the ISP has blocked something to limit the speed?
WEP is only 54 MHZ
WPA2 is upto 300MHZ
Tried 2 different Netgear routers with same results Currently configured for WEP shared
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E6600 @ 3.06GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 8190 Mb
Graphics Card: Mirage Driver, 2 Mb
Hard Drives: C: Total - 476837 MB, Free - 428341 MB;
Motherboard: Gigabyte Technology Co., Ltd., G41MT-S2PT
Antivirus: Norton 360, Updated and Enabled
View 7 Replies
View Related
Jun 12, 2012
I have an old XP laptop which is now used for my wife on her embroidery machine and have tried to integrate it into the home wifi. The other three PC's/laptops all have win7. Is the XP not compatible? It sees and connects to the wifi with full strength, but I cannot access internet at all.
View 1 Replies
View Related
Sep 20, 2011
I decided to get rid of my wifi and go straight LAN wired internet connection to PC. The wifi connected fine, but when i plugged in LAN wired connection windows 7 does not detect connection. I searched through control menu and nothing. When connected to Asus Z68 motherboard orange steady light turns on motherboard. Also connected same wire to laptop via lan and windows 7 connects automatically.
View 9 Replies
View Related
Apr 28, 2012
Cumputer connects to network but not to internet. I've tried wired & wireless and get the same results. I get an error message that there is a problem with the bridge adapter
View 1 Replies
View Related
May 2, 2011
I setup the ikev1 client and can connect but I can't pass traffic either way. I have tried icmp, port 80, smb etc... here is my config: ........
View 9 Replies
View Related
Oct 10, 2011
I have a Cisco ASA 5505 with eth0/0 as outside and eth0/1-eth0/7 as inside.On the outside interface I have to IPS's. One cable and one dsl.My main connection goes out over my cable ISP.I have 2 static routes on the outside interface.One with metric 128 for my cable ISP.One with metric 254 for my dsl IPS.I'm tracking my cable ISP with a ping to their default gateway (only available on my cable ISP)Failover from cable to dsl works perfect when my cable IPS goes down and fails back when it's back online.My problem however is when a VPN user connects from the outside using the Any connect client.Every time, about 5-10 minutes later, my tracked route get's removed (message: 622001) and added back 15-30 seconds later.This of course drops the VPN user. It doesn't happen again if the VPN user logs back in after that. [Code]
View 1 Replies
View Related
Aug 11, 2011
I am trying to use a ASA 5510 with AnyConnect as an in-line SSL VPN device. I have a separate firewall that NAT's 443 to the inside IP of the ASA, which is the only configured interface on the ASA. I can connect to the ASA from the WAN just fine and the AnyConnect client connects just fine, I get an IP lease across the VPN on my LAN, all looks well. The problem is that I cannot pass any traffic. The only device on my LAN that I can ping is the ASA, nothing else including the default gateway is accessibe. I have setup a static route on the ASA pointing 0.0.0.0 0.0.0.0 to the LAN gateway, but no dice.
View 1 Replies
View Related
