Connects To Network But Not To Internet
Apr 28, 2012Cumputer connects to network but not to internet. I've tried wired & wireless and get the same results. I get an error message that there is a problem with the bridge adapter
View 1 RepliesCumputer connects to network but not to internet. I've tried wired & wireless and get the same results. I get an error message that there is a problem with the bridge adapter
View 1 RepliesMy laptop is able to connect to the wireless router in my home, but the browser will never load a page, status is shown "connected". However, when I try on other laptops, they are able to surf the net. I have tried using my laptop at my friend's place with a different wireless router and it works at his place as I was able to surf the internet through my wireless! So, I've tried resetting my personal modem to factory default and it still doesn't work!
View 2 Replies View RelatedI have a compaq presario that will connect to my wireless network but when i open internet explorer or mozilla firefox the page will not load and says that the server cannot be found. i don't think the router is the problem since i have a separate computer that connects just fine wirelessly and a ps3 that connects to the internet just fine. the only way i have been able to access the internet with the compaq is plugging it into the modem with the ethernet cable but i want to connect wirelessly.
View 2 Replies View RelatedXbox connects to the network but not the internet what should i do?
View 4 Replies View Relatedmy vista machine connected to the internet. My PC, a Dell studio 540, worked perfectly well on the BT Homehub2 in our last house but now I have very infrequent access.The wireless adapter connects to the network but not to the internet. I get a 'Identifying public network' message with (no customise option). When I use LAN to connect 'unidentified network'.it will connect via wireless, but it seems random and then if the machine sleeps or is restarted it's back to square one.
[code]...
So have got fibre optic broadband which meant installing new network and wired/wireless router. Everything working fine except on one (vista) laptop which connects wirelessly but cannot get past the router to the network.
View 5 Replies View Relatedcan connect to the network but not the internet. In IPCONFIG it says media is disconnected. In properties it says adapter is not connected. But I can see the network, I can ping every computer on the network, just can't get to the internet.Reinstalled all the drivers, tried renew, netsh commands, flushdns, disabled & reenabled. 2 other computers connect to the internet and each other with no problem. Can connect to other WI Fi's too, but still no internet access.
View 8 Replies View RelatedI am running a VPN server on my desktop at home, with all the default settings, and i checked the box that allows clients to connect over the internet. this is win7 x64 computer. I opened up port 1723 with PPTP protocol on my E4200 router.On the client i am running win7 x64 as well. I am able to connect to the vpn, from another internet connection, but there is no local network acess. It says the status is No Internet Access. and the IP that is assigned is the 169.x.x.x one that windows defaults when it doesnt find a dhcp server.How can i get the client to connect with full local network access. Right now being connected to the vpn, it means nothing, i have no access other than being "connected".
View 1 Replies View RelatedWe have a fairly new (about two weeks) wirless network set up in our home consisting of a Netgear modem (with wifi, which I have disabled) connected to a Belkin N wireless router. Our ISP is Optus.
My laptop (which is running Windows Vista service Pack 2) was connecting fine since we set it up until about 2 nights ago. Since then, it has had trouble connecting to the network (windows tells me it's taking longer than usual) and when it finally does, I have limited or no connectivity.The internet works fine when the laptop is connected directly to the modem, and if I unplug the wire, it stays connected to the network wirelessly for several minutes before it drops the signal.
At first I thought it was because I was using the laptop at the back of the house (with the modem and router being at the front), perhaps the signal experiencing interference, but no matter where in the house I try to connect, it has problems.I also tried updating the drivers and uninstalling/reinstalling the drivers for the adapter in the laptop, with no luck.
P.S.
Xirrus pictures =
1. taken from the back of the house (not connected to the network) where the laptop is used a majority of the time. Although the strength isn't the best, there didn't seem to be any problems in the two weeks prior to this.
2. taken from the same room as the modem and router, connected to the network, but with "limited/no connectivity"
Command Prompt:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all[code].....
Title basically sums it up. Whenever my laptop connects to the wireless network in my house, it becomes unusable since nothing can no longer load. I have done a full virus scan and all, found no viruses, adware, spamware, etc. I also downloaded a program to check what programs are using bandwidth but nothing seemed out of the ordinary or enough to completely stop the Internet
View 1 Replies View RelatedIt is a Satelite 733. Have pinged without any response however the wifi or hardwire will show connected to the local net.I have four other units surfing the web fine and wifi picks up ok except for one unit that my neighbor need will not connect no matter what. Have updated all the drivers, uninstalled and re-installed devices, reset ip, dumped the dns several times, etc.So here is the ipconfig stuff....ignore the cable connect I only have the wifi on at the moment. I have stared at this to the point where I know naathing .Is the tunnel adaptor the indication that the card is out? Oh and I tried taking out IPV 4 on both channels and nothing so I left one with 4 on and the other with it off just as something else to try. [code]
View 2 Replies View RelatedI have a wireless network set up in our small office. I just bought the DIR-655 and installed it (did have a very old Netgear router). I currently have two wireless printers, a MAC and a couple of iPhones that can connect to the network and internet. My desktop is plugged in and also connects fine.The BOSS just came in with his fairly new Win7 laptop and I connected it to the network, however, no matter what I try, it won't connnect to the internet. I can see his laptop in the network, it can see my computer and it says that it is connected to the network. It also says that it is not connected to the internet. I ran the troubleshooting (by clicking on the "X" between the network and the internet in the Network and Sharing Center) and it said it couldn't find the problem. The Win7 laptop has no problems connecting to the old network, nor any others that it encounters.
View 1 Replies View RelatedI am having a problem with my Inspiron 1525. It connects to my home wifi network, but doesn't connect to the internet. The Windows says there is a problem with the router, but my housemates have no problem getting into the internet with their Macbooks. I have tried resetting the router (numerous times) and disconnecting from my network and reconnecting, but it doesn't work.
View 10 Replies View RelatedI have a Windows 7 computer that was built by ibuypower. It's great, but I ordered a rosewill wireless adapter for it and noticed that my connection strength and speed are both pretty terrible. I went on amazon and bought a TP-Link wireless adapter(TL-WN822N). I installed the most recent "V2" drivers from their website and upon disabling my rosewill adapter and enabling the new TP-Link adapter, I was able to connect to the network, but not access the internet. I have tried power cycling the router, using the reset switch on the router, restarting my computer, and a bunch of commands that I found on this site. Is it possible that I have a defective adapter?
Also, some more information: My isp is comcast and the router is from them as well. Here is my ipconfig /all log for the rosewill adapter(internet access):
Quote:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Trauma
[Code]......
My Compaq C700 laptop connects to my wireless network but I can't get on the internet. How do I fix it?
View 8 Replies View RelatedJust set upa new e1200 on my brand new primary PC - connects flawlessly. One other PC in the house and an iphone also connect on the network to the internet with no issues. The problem: My laptop connects to the secure network without prompting for a password,but then does not connect to the internet at all. This same laptop easily connects to the internet via the network as a guest, just as it should. Tried using Easkey, but same result: laptop connects OK to the secure network without a password prompt, but then does not connect to the net.
View 5 Replies View RelatedI have a Dell XPS 8300 desktop and have been having issues with the modem connecting to the wireless network just fine but, I'm not able to access the internet. This has only occurred over the last 24 hours and is frustrating. I've read some other recent posts and have gone back and done the System Restore to before the installation of Windows Updates a day or so ago and that has worked twice today. But I'm not a PC expert and I would like to know how I could resolve this issue permanently without having to undo the updates with System Restore every time I power up and log in. How do I figure out what setting is being undone to disconnect the internet connection from my XPS 8300?
View 5 Replies View RelatedLaptop connects to wifi network. But it shows "No Internet Access" message.My Macbook connects to the internet just fine and the wifi on my iphone works as well.The ethernet on the laptop works and I am able to access the internet this way. The laptop does connect to some of the other access points but I've had issues with my router.I tried the usual debugging mechanisms - disable/enable adapter, reset the router, reset the tcp/ip stack. [code]
View 1 Replies View RelatedI have an E4200, and upgraded to Connect Cloud. It was buggy, and so I downgraded to the firmware before that. I have all the computers working fine in the house except my desktop. it connects fine to the network, can see the other computers on the network, can even do a windows update. But when I go to use google chrome or internet explorer it just wont access the internet. It doesn't seem to work either if it is a wired connection, or a wireless connection It was fine before the upgrade and subsequent downgrade. It was on this desktop that i installed and uninstalled thew Connection cloud. I know enough to set up the network but when it doesn't work
View 4 Replies View RelatedI have a compaq preario running on windows 7 ultimate.It has been working well with the internet connection but recently it stopped connecting to the internet.It recognizes other computers in the network but the internet connection is not available.
View 1 Replies View RelatedI have an E900 I replaced an old Airport Extreme with. The reason was for increased download speed. The Apple router I used saw my work network and I could access files and printers; no changes to my Mac were necessary. It worked out of the box. The new Linksys has Internet connectivity but will not see my work network at all. I have looked into the old settings and cannot figure out how to make the new router see my network. I called Linksys but no dice. What settings need to be changed to see the work network? It is connected to the same ethernet cable as the other router that worked fine.
View 1 Replies View RelatedThis PC is connected to a Press machine in our Production area (Lan only with machine and PLC's) so I disable the LAN to the press then the 3G connection comes up with bps activity. I want to use teamviewer on the PC for remote support but teamviewer is unable to connect like it use to and its a free license. I tried internet explorer and "page cannot be displayed". There are no special proxy settings and DHCP IP. ( Windows XP with admin rights)
Whats confusing is even if the lan is disabled, the 3G connection would only come up now and then, but then I could add. The PC has viruses and very slow at the moment and I have loaded free AVG just to scan and clean some to see if it works. I cannot format the PC or something like that because there is production software and applications on with special settings that runs the R10 000 000 press machine and if the PC stops... trouble :/ I have ordered new PC for the press machine 18 000 Euros but that would take 12 weeks to arrive and if I could get the connection internet working on the machine it would be great.
Its actually owned by the charity that i volunteer for and is connected to their private network and the internet ,When the user logs on in the morning, the laptop will not connect to the internet, it will also not connect to the shared network drive, so i can assume theres a local connection issue too,the user has to restart the laptop several times before the laptop will connect.
View 5 Replies View RelatedI recently got a computer, and it's all running fine, except for the internet.My internet connects through wireless to a box, I have no idea what you call it. Router?The house has three active laptops, all of which are working perfectly fine. This new computer,however, is a desktop, and I am trying to connect to my house's internet through a USB stick device that transmits the signal (D-link, model DWA-110). I know for a fact that this device works for two reasons. Firstly, I've used it in another laptop, and more strangely, it works on this new computer sometimes too.After about half an hour of random methods to make a connection stick, it might connect. And it lasts until the computer goes to standby, or is turned off. This is just random stuff through the network and sharing centre part of the control panel.Nothing ever works twice, and I haven't been able to replicate it for about a week. It successfully connects, and the connection is real because I can access the internet momentarily. But it always just disconnects again. I've tried it in every USB port, too.The signal strength is excellent, and when it connects it works great. It just almost always fails to.
View 1 Replies View RelatedSo the best way to explain this is if im on the internet i wont really notice it because it happens so fast and im on the page. also its wireless internet.If i play for example league of legends il be fine then il be reconnecting then im back but the reason im reconnecting is because my connection dropped for a second.IF i open say an online game and i open a stream watching someone. Either the stream will turn off or the game will disconnect or ill get kicked from both.Ive gone into command prompt and done ping google.com and stuff sometimes its perfect then i do it again it misses 2 with time out then i do again its perfect then again time out again time out then perfect its really annoying.I recently started playing a new game and il be running then disconnect from the servers because my connection dropped for a second and ive rang bt and stuff have 2 new hubs. switch phone lines replaced filters still dont know whats going on.
View 1 Replies View RelatedI have a wireless router with my sky broadband account.My computer crashed and when I repaired it without losing files etc, it wiped the system clean.I had to go from Vista to XP as the pc never had a recovery disc with it.I have also recently upgraded to Windows 7 extreme, however the problem remains the same in that, the pc will not detect the wireless router. However, my dads laptop which I am using now, DOES connect to the internet.I have spoken with Sky support and after going through all the usual checks and tests, they have decided it is a pc fault.
View 3 Replies View RelatedI have an old XP laptop which is now used for my wife on her embroidery machine and have tried to integrate it into the home wifi. The other three PC's/laptops all have win7. Is the XP not compatible? It sees and connects to the wifi with full strength, but I cannot access internet at all.
View 1 Replies View RelatedBeen wondering what would make a LAN only run on 10mbps. I recently experienced this on two clients sites. It won't just connect when I configure the LAN to run on 100mbps. Only connects on 10mbps. What could be responsible for this? Won't this affect the performance of ones application?
View 5 Replies View RelatedI have a 2811 that I can remotely VPN to using Cisco VPN client however I cannot see the internal admin network (10.35.5.0).
Current configuration : 4845 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
[code].....
I'm working with a friend out with his computer, and he can't connect to the internet, but i can.But he uses a different computer system than me and turning on the wireless networking.
View 1 Replies View RelatedRecently my laptop has had problems connecting to any wireless routers.
Now and then it will connect but not for very long - 10-15 mins max, then connection will be lost even though the signal strength is strong. It sometimes connects after it has been asleep for a while or when it's been turned off.
My flatmates and I recently got Sky broadband - their laptops connect just fine to the internet and they are able to use it without any problems. Mine also connects, but I can't do things like browse or use Skype, etc.When I go into Google Chrome, I'm told there is a DNS error that was unable to be resolved. Mozilla tells me that I have a problem with my server, and IE doesn't work either. Also, I am receiving very few packets. For every 2,000 or so packets that are sent, I only receive 2 or 6. When I click 'repair' I am told that my IP address cannot be renewed. The thing is, the internet works on my netbook at my mother's house, yet it doesn't work in my flat or other places like wifi spots.
I've tried so many things, such as clearing the DNS cache, releasing and renewing IP address, I've set the properties of the wireless connection to obtain DNS and IP automatically, I've tried pinging, I've turned off all my firewalls, I tried system restore, I've fiddled with certain keys in the registry, I even rebooted my entire hard disk last night and it still doesn't work! I'm really at my wit's end with this and I don't know what else to do. The problem is way beyond my comprehension now.
My housemate just got a second hand laptop which i restored to factory settings for him. the computer is running windows vista and everything is working fine, however the computer will connect to the wireless network but wont get any internet. the network itself is fine as we already have 3 computers connected to the internet with no problems.
View 2 Replies View Related