Laptop Connects To Wifi Network / It Shows No Internet Access Message
Sep 29, 2012
Laptop connects to wifi network. But it shows "No Internet Access" message.My Macbook connects to the internet just fine and the wifi on my iphone works as well.The ethernet on the laptop works and I am able to access the internet this way. The laptop does connect to some of the other access points but I've had issues with my router.I tried the usual debugging mechanisms - disable/enable adapter, reset the router, reset the tcp/ip stack. [code]
I have a two year old Toshiba laptop that no longer connects to the internet either via ethernet cord plugged into the laptop nor my home wireless network. I have disabled the firewalls and the problem continues. The Network Connection screen shows the computer connected locally but not no internet connection. The laptop is running Windows Vista.
So i have a dell latitude e6400 laptop running windows XP. Now whenever I connect to my home wireless network, it will connect fine but randomly it will stop sending or receiving data. Therefore i cannot connect to any websites and i get a connection error. I check my connection though and it is running through an excellent connection.
After a couple of hours using the internet, the connection stopped. The wireless router still had an 'Excellent' signal, but it also said I had no internet access. All of the other wireless devices in my house connect to the internet perfectly, including when right next to the laptop.I've tried disabling the firewall and resetting the computer a few times, but nothing seems to pick up the internet access. The troubleshooting guide tells me that it is a problem with the wireless modem, but quite obviously that isn't true.
I have a compaq presario that will connect to my wireless network but when i open internet explorer or mozilla firefox the page will not load and says that the server cannot be found. i don't think the router is the problem since i have a separate computer that connects just fine wirelessly and a ps3 that connects to the internet just fine. the only way i have been able to access the internet with the compaq is plugging it into the modem with the ethernet cable but i want to connect wirelessly.
So have got fibre optic broadband which meant installing new network and wired/wireless router. Everything working fine except on one (vista) laptop which connects wirelessly but cannot get past the router to the network.
My computer connects to an unscured wifi near my home and i have internet acces for a few minuets, then it just stoppes. Sometimes if i reconnect it will run for a few more minuets 5-10. I have tried two different computers with same results. about a month ago the connection worked fine. This just started recently.I can connent and access internet at other public places with no problem. It seems only this network i have trouble with, why?I am running XP on one, and Win 7 on other, same results.I have read alot of things and tried them all,
-resetting internet options - changing tcp/ip - system restore with no results.
We have a fairly new (about two weeks) wirless network set up in our home consisting of a Netgear modem (with wifi, which I have disabled) connected to a Belkin N wireless router. Our ISP is Optus.
My laptop (which is running Windows Vista service Pack 2) was connecting fine since we set it up until about 2 nights ago. Since then, it has had trouble connecting to the network (windows tells me it's taking longer than usual) and when it finally does, I have limited or no connectivity.The internet works fine when the laptop is connected directly to the modem, and if I unplug the wire, it stays connected to the network wirelessly for several minutes before it drops the signal.
At first I thought it was because I was using the laptop at the back of the house (with the modem and router being at the front), perhaps the signal experiencing interference, but no matter where in the house I try to connect, it has problems.I also tried updating the drivers and uninstalling/reinstalling the drivers for the adapter in the laptop, with no luck.
P.S. Xirrus pictures =
1. taken from the back of the house (not connected to the network) where the laptop is used a majority of the time. Although the strength isn't the best, there didn't seem to be any problems in the two weeks prior to this.
2. taken from the same room as the modem and router, connected to the network, but with "limited/no connectivity"
Microsoft Windows [Version 6.0.6002] Copyright (c) 2006 Microsoft Corporation. All rights reserved.
Title basically sums it up. Whenever my laptop connects to the wireless network in my house, it becomes unusable since nothing can no longer load. I have done a full virus scan and all, found no viruses, adware, spamware, etc. I also downloaded a program to check what programs are using bandwidth but nothing seemed out of the ordinary or enough to completely stop the Internet
I have a wireless network set up in our small office. I just bought the DIR-655 and installed it (did have a very old Netgear router). I currently have two wireless printers, a MAC and a couple of iPhones that can connect to the network and internet. My desktop is plugged in and also connects fine.The BOSS just came in with his fairly new Win7 laptop and I connected it to the network, however, no matter what I try, it won't connnect to the internet. I can see his laptop in the network, it can see my computer and it says that it is connected to the network. It also says that it is not connected to the internet. I ran the troubleshooting (by clicking on the "X" between the network and the internet in the Network and Sharing Center) and it said it couldn't find the problem. The Win7 laptop has no problems connecting to the old network, nor any others that it encounters.
I am experiencing connectivity issues with the wireless part for several weeks. The laptop connects to it, but it shows me that it does not have internet access.I also have a belkin router that I also use. So, when I have the connectivity issues, I connect to the other router. When I use the Cisco Connect application, it goes on for a couple of minutes and then gives the message "If you are not connected to my router SSID name you can't update your router settings".
I need to know why I am losing internet connectivity like around nighttime, late. I keep losing internet on both IPv4 and IPv6! It both said "No Internet Access" Then later IPv6 said "No Network Access" That's the problem i am having on my personal laptop computer. I really am furious that I lost internet connection around 12:15, 12:30, 12:50, 1:30, 2:15, 2:30, and 3:30 A.M. i suddenly lost internet right there. And I heard the internet crew shuts down the internet system every nighttime and fixing it. I want to know why they need to fix it, how long will the repairs last ?
I have been using Dell Vostro-1320 laptop with Windows XP. It was running good. Recently I have installed the McAfee Internet Security software. But now I do not have internet access through this laptop although the network icon shows "connected". I have tried all the advice/solutions for such type of problem by doing Firewall off/on and changing adapter & network setting. I also updated all the drivers. But nothing works. It is notable that my other desktop is working properly in spite of installing this software.
can connect to the network but not the internet. In IPCONFIG it says media is disconnected. In properties it says adapter is not connected. But I can see the network, I can ping every computer on the network, just can't get to the internet.Reinstalled all the drivers, tried renew, netsh commands, flushdns, disabled & reenabled. 2 other computers connect to the internet and each other with no problem. Can connect to other WI Fi's too, but still no internet access.
I am running a VPN server on my desktop at home, with all the default settings, and i checked the box that allows clients to connect over the internet. this is win7 x64 computer. I opened up port 1723 with PPTP protocol on my E4200 router.On the client i am running win7 x64 as well. I am able to connect to the vpn, from another internet connection, but there is no local network acess. It says the status is No Internet Access. and the IP that is assigned is the 169.x.x.x one that windows defaults when it doesnt find a dhcp server.How can i get the client to connect with full local network access. Right now being connected to the vpn, it means nothing, i have no access other than being "connected".
It is a Satelite 733. Have pinged without any response however the wifi or hardwire will show connected to the local net.I have four other units surfing the web fine and wifi picks up ok except for one unit that my neighbor need will not connect no matter what. Have updated all the drivers, uninstalled and re-installed devices, reset ip, dumped the dns several times, etc.So here is the ipconfig stuff....ignore the cable connect I only have the wifi on at the moment. I have stared at this to the point where I know naathing .Is the tunnel adaptor the indication that the card is out? Oh and I tried taking out IPV 4 on both channels and nothing so I left one with 4 on and the other with it off just as something else to try. [code]
A couple weeks ago my HP laptop stopped working. It would not boot and I had to put in the recovery discs to get it working again. Before this the laptop had connected fine to my home wifi secured with WPA2-PSK[AES]. After this problem tho it refuses to connect while it is secured. When not secure it functions fine and I am currently using it to type this post. I would have no problem continuing to use the wifi unsecured but another member of my household works with confidential medical information from home and is worried about the lack of security. I have attempted the trouble shooting tips on the support website already. My computer model is HP G60-235DX and the router is a Netgear N300 model WNR2000v3[CODE]
I have a Windows 7 computer that was built by ibuypower. It's great, but I ordered a rosewill wireless adapter for it and noticed that my connection strength and speed are both pretty terrible. I went on amazon and bought a TP-Link wireless adapter(TL-WN822N). I installed the most recent "V2" drivers from their website and upon disabling my rosewill adapter and enabling the new TP-Link adapter, I was able to connect to the network, but not access the internet. I have tried power cycling the router, using the reset switch on the router, restarting my computer, and a bunch of commands that I found on this site. Is it possible that I have a defective adapter?
Also, some more information: My isp is comcast and the router is from them as well. Here is my ipconfig /all log for the rosewill adapter(internet access):
C:Windowssystem32>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Trauma
I have an E4200, and upgraded to Connect Cloud. It was buggy, and so I downgraded to the firmware before that. I have all the computers working fine in the house except my desktop. it connects fine to the network, can see the other computers on the network, can even do a windows update. But when I go to use google chrome or internet explorer it just wont access the internet. It doesn't seem to work either if it is a wired connection, or a wireless connection It was fine before the upgrade and subsequent downgrade. It was on this desktop that i installed and uninstalled thew Connection cloud. I know enough to set up the network but when it doesn't work
I have a Dell Studio 1737 running Windows 7 64 bit. I turned it on today and it automatically connected to my home network as usual and when I hover over the network icon it says there is Internet Access but when I open Firefox it can not connect to any websites. When I run the automatic troubleshooter, it does not detect any problems with the connectivity.
I ran ipconfig /all and this is what came up:
Microsoft Windows [Version 6.1.7601]Copyright (c) 2009 Microsoft Corporation. All rights reserved.C:UsersDanny>ipconfig /allWindows IP Configuration Host Name . . . . . . . . . . . . : Danny-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : NoWireless LAN adapter Wireless Network Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter Physical (code)
I have a compaq preario running on windows 7 ultimate.It has been working well with the internet connection but recently it stopped connecting to the internet.It recognizes other computers in the network but the internet connection is not available.
I just got a new internet connection after going for 2 years or so without one here at home, now that i have it and got the router installed and all my main computer a desktop (HP Pavilion a6655f Desktop PC) has not been able to connect online using my laptop i've had no problems but would really like to get my desktop online as well, I have tried the windows diagnostic tool tried resting the adapter but that has not worked.
I recently got an access point to extend the wireless range in my house. It is a Netgear WN802T. The long and short of it is, it works fine, i configured it succesfully, it reaches the main router and gets an IP address from it. My laptop connects to it fine without fuss. However, my phone (HTC Desire HD) and tablet (Motorola Xoom) are unable to connect.They can 'see' the access point, but when i connect and put in the passcode, it get's stuck on 'scanning' or 'disconnected'. I've tried turning certain settings on and off, i've tried taking it out of G/N mode and taking it down to B/G mode.
I've tried multiple types of security (WPA-PSK, WPA-PSK 2, TKIP, AES...), the odd thing is, the type of security my main router uses (which the phones connect to without a hitch) does not work. I have tried different channels. My main router's channel is 1, which works perfectly fine. To make sure there is little interference, i set the AP channel to 4. I've also tried auto, no avail.
The laptop doesn't seem to care what i change the settings to, it connects fine and gets the internet perfectly. But my phone and tablet just don't want to play ball. I don't think the router is broken or anything, it works fine, but i think there's some incompatibility issue here that i'm not seeing.
I have a Vaio laptop that shows full bars connection to my Belkin_Enhanced_E98E8F modem but when I try to connect them it tells me "the wireless security key is not correct". Well, i know for a fact it IS correct.
Its actually owned by the charity that i volunteer for and is connected to their private network and the internet ,When the user logs on in the morning, the laptop will not connect to the internet, it will also not connect to the shared network drive, so i can assume theres a local connection issue too,the user has to restart the laptop several times before the laptop will connect.
I have a wireless router with my sky broadband account.My computer crashed and when I repaired it without losing files etc, it wiped the system clean.I had to go from Vista to XP as the pc never had a recovery disc with it.I have also recently upgraded to Windows 7 extreme, however the problem remains the same in that, the pc will not detect the wireless router. However, my dads laptop which I am using now, DOES connect to the internet.I have spoken with Sky support and after going through all the usual checks and tests, they have decided it is a pc fault.
I have an old XP laptop which is now used for my wife on her embroidery machine and have tried to integrate it into the home wifi. The other three PC's/laptops all have win7. Is the XP not compatible? It sees and connects to the wifi with full strength, but I cannot access internet at all.