Computer Connects To Wifi But Internet Access Stopped After 5-10 Minutes
Mar 31, 2012
My computer connects to an unscured wifi near my home and i have internet acces for a few minuets, then it just stoppes. Sometimes if i reconnect it will run for a few more minuets 5-10. I have tried two different computers with same results. about a month ago the connection worked fine. This just started recently.I can connent and access internet at other public places with no problem. It seems only this network i have trouble with, why?I am running XP on one, and Win 7 on other, same results.I have read alot of things and tried them all,
-resetting internet options
- changing tcp/ip
- system restore with no results.
View 4 Replies
ADVERTISEMENT
Aug 20, 2012
Have two other computers that connect with ease to the Netgear wireless router, but the new computer will not access the internet. I have been searching for answers and have tried about everything I can find nuder similar posts, but I still have not internet access. At varying times, I have had "internet access", but no actual ability to load websites. Right now, I do not even have access. I am at a loss.Even at my low level of experience, I am usually able to tinker until I fix the problem, but I am about four hours in and currently seem to have taken a step backward. I cannot even begin to explain what things I have already tried
View 9 Replies
View Related
Sep 29, 2012
Laptop connects to wifi network. But it shows "No Internet Access" message.My Macbook connects to the internet just fine and the wifi on my iphone works as well.The ethernet on the laptop works and I am able to access the internet this way. The laptop does connect to some of the other access points but I've had issues with my router.I tried the usual debugging mechanisms - disable/enable adapter, reset the router, reset the tcp/ip stack. [code]
View 1 Replies
View Related
Feb 7, 2012
I'm working with a friend out with his computer, and he can't connect to the internet, but i can.But he uses a different computer system than me and turning on the wireless networking.
View 1 Replies
View Related
Oct 25, 2011
I'm working at a high school which has pretty large grounds. The network is configured via one central router and a lot of access points. Recently, they shut down my access point for a moment after connecting it again. The access point works fine (after finding my problem we've tested a lot of computers and they all connect to it and the internet). My laptop and my desktop - the only computers connected to access point when it was rebooted - do not connect to this access point however!
Instead, they "choose" to connect to an access point farther away, so that my signal strength is extremely low (and hence, my internet connection is very poor).How do I get my computers to connect to the previous access point with the strong signal?
The laptop runs Windows 7 32-bit and the desktop runs Windows 7 64-bit.
View 5 Replies
View Related
Dec 1, 2011
my computer only connects to the internet in safe mode
View 3 Replies
View Related
Aug 29, 2011
I have a windows 7 computer that was connected wirelessly to my router and internet worked fine. One day i woke up and the internet would not work. The computer is still connected to the router but no internet access.There are other computers on the network that connect fine.I have also tried connecting my computer directly to the modem and still no internet.Running windows diagnositc tells me there is no default gateway available. Ive cycled the modem and router probably a million times and even taking the pc to another house to try on a different router and still no go.
View 5 Replies
View Related
Sep 26, 2011
I am having a weird problem with one of my network PC's. I admin a small network which I inherited at work but am a novice when its comes to networking hardware.One of the PC's suddenly stopped connecting to the internet on Fri night, as the cables have all been run through the roof I went through every cable on the D-Link 10/100 ethernet switch and could not get it to connect. Connection wizard showed it was sending packets whenever I tried to ping but recieved 0.
View 14 Replies
View Related
Sep 1, 2012
We have a Belkin N300 router connected to the internet through a cable modem(Comcast). Up until yesterday it worked fine for all the devices connected. But now whenever my brother's laptop connects(wireless) to the network it makes the router lose connection to the internet so all the devices connected lose connection, too obviously. Everything shows connected to the router, but the router releases it's DHCP whenever he connects. As soon as he turns off his wifi or manually chooses to disconnect... the internet fires right back up within a minute or so. We have no idea what is causing this. We did notice that his laptop was trying to connect with IPV6 while everything else was using IPV4
View 2 Replies
View Related
Apr 25, 2011
Just purchased a new computer. Old one has a Lynksis wireless router. Tried to connect the old one and can't get internet.
View 1 Replies
View Related
May 16, 2012
I woke up and my computer just refused to connect to internet. My roomates computer connects fine to the same modem (we use adsl). I tried switching cables and ports. The night before, my computer had an unexpected shutdown...
View 1 Replies
View Related
Jan 29, 2011
My computer connects to the internet but when i try to get it on it pops up webpage cant be displayed.Then when i diagnose the problem it says somethings wrong with my proxy server ive followed the instructions.
View 2 Replies
View Related
Dec 30, 2011
We have a fairly new (about two weeks) wirless network set up in our home consisting of a Netgear modem (with wifi, which I have disabled) connected to a Belkin N wireless router. Our ISP is Optus.
My laptop (which is running Windows Vista service Pack 2) was connecting fine since we set it up until about 2 nights ago. Since then, it has had trouble connecting to the network (windows tells me it's taking longer than usual) and when it finally does, I have limited or no connectivity.The internet works fine when the laptop is connected directly to the modem, and if I unplug the wire, it stays connected to the network wirelessly for several minutes before it drops the signal.
At first I thought it was because I was using the laptop at the back of the house (with the modem and router being at the front), perhaps the signal experiencing interference, but no matter where in the house I try to connect, it has problems.I also tried updating the drivers and uninstalling/reinstalling the drivers for the adapter in the laptop, with no luck.
P.S.
Xirrus pictures =
1. taken from the back of the house (not connected to the network) where the laptop is used a majority of the time. Although the strength isn't the best, there didn't seem to be any problems in the two weeks prior to this.
2. taken from the same room as the modem and router, connected to the network, but with "limited/no connectivity"
Command Prompt:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all[code].....
View 1 Replies
View Related
Feb 25, 2011
I have a printer connected to another computer (Win XP) and it wasn't showing up on the network so I followed some installation process to install a network driver or something. Now the printer is working fine. BUT... Now that computer is having internet problems. It connects to the internet fine but some programs say it doesn't. Like Microsoft Outlook. A message always shows up saying "Must work offline" or something. And I cant listen to some things on the internet because a message comes up saying you must connect to the internet.
View 8 Replies
View Related
Mar 6, 2013
I just got new roommates and the internet on his computer would only load facebook and google. NOTHING else. It said he has internet connection but it still wouldn't work. I even called my internet provider and they couldn't figure it out. His internet worked perfectly fine when it was on safe mode with networking. I even disabled his firewalls and I ran malewarebytes but found nothing. I thought this was just his computer but then a day later my computer is doing the same thing! my computer has worked perfectly fine for over a year on the same router and everything but now it has the same exact symptoms as his. I don't know if this is a router issue or not. .
It is a wireless connection, internet provider is cable one, and my router/modem is a Zoom DOCSIS 3.0 cable modem/Router with wireless -N
View 2 Replies
View Related
Jun 12, 2012
I have an old XP laptop which is now used for my wife on her embroidery machine and have tried to integrate it into the home wifi. The other three PC's/laptops all have win7. Is the XP not compatible? It sees and connects to the wifi with full strength, but I cannot access internet at all.
View 1 Replies
View Related
Aug 10, 2011
I have an Aironet 1250 Access Point. I was asked to upgrade the software on the access point so I downloaded c1250-k9w8-tar.124-23c.JA5.tar and tried to upgrade it from IE9 browser window. I allowed the upgrade to run overnight. It ran for 900+ minutes before I unplugged the router. I know it said not to interrupt the upgrade, but it seemed like something was wrong.So, I have the access point conntected to my computer with a blue cable and it is also connected to the network. I tried running Hyperterminal hoping that I could set the ip address or otherwise connect to it.
The Hyperterminal printout gives me this:
APc89c.1dfd.189a#*Aug 22 20:10:03.523: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.Not in Bound state.*Aug 22 20:10:12.027: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.*Aug 22 20:10:12.095: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigned DHCP address 159.169.59.114, mask 255.255.255.0, hostname APc89c.1dfd.189a
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (159.169.59.39) (159.169.59.25)
Translating "CISCO-LWAPP-CONTROLLER"...domain server (159.169.59.39) (159.169.59.25)
Is it possible to get this access point working again? How would I get it working again?
View 2 Replies
View Related
Aug 22, 2012
I don't really know what I am doing and have had no Cisco training I have an Aironet 1250 Access Point. I was asked to upgrade the software on the access point so I downloaded c1250-k9w8-tar.124-23c.JA5.tar and tried to upgrade it from IE9 browser window. I allowed the upgrade to run overnight. It ran for 900+ minutes before I unplugged the router. I know it said not to interrupt the upgrade, but it seemed like something was wrong.
So, I have the access point conntected to my computer with a blue cable and it is also connected to the network. I tried running Hyperterminal hoping that I could set the ip address or otherwise connect to it.
[code]....
View 13 Replies
View Related
Apr 10, 2012
Yesterday I bought a new wireless adapter (Belkin Surf Micro, it was the only one for sale nearby). I installed it from the disk, and it worked for around a minute, then... nothing. This kept happening every time with several reboots and reinstalls inbetween.I thought maybe the adapter was faulty, so I installed it on my Mums laptop. It worked great.I have tried flushing the dns, and some other command prompt based things suggested on other sites, but to no avail.But here's the thing that strikes me as funny: Even when it connects to the internet for that minute or so I cannot ping the router, even though it says on the router page (viewed from another computer) that I am definately connected to it. I also cannot ping google or anything but myself.
View 5 Replies
View Related
Aug 23, 2012
I have a Lenovo G570 model 4334(i3) and it is connecting to my wireless network but has no internet connection ( an alert sign on signal bars appears). I tried turning off, reseting my router and nothing happens. Also, a desktop(direct connection), a laptop and my Galaxy SII connect to wifi without a problem.
View 3 Replies
View Related
Dec 22, 2011
I just bought an acer aspire 7551 and did a clean install of windows 7 x64 ultimate, installed all the drivers and connected to my router. the laptop will connect to the internet through an ethernet cable but will not connect through the wifi card, I've already downloaded 4-5 different versions of the driver.
View 3 Replies
View Related
Jul 4, 2012
I have TP-LINK TL-WR740N router and I am trying to configure it to work with my Broadband cable over PPPOE.The router once configured show status as connected with a proper IP and DNS servers. When I use the routers inbuilt ping utility to ping Google or any other site I get a reply.But when I connect my computer to the router on the LAN port I see no internet on my computer. I am able to ping the router address but not google.I tried disabling all Firewalls and Antivirus I have but problem still the same.Also I tried connecting over WIFI but still no internet.I also called up TP-LINK helpline several time and got my router replaced. They also tried a few settings on my machine but no success.
View 1 Replies
View Related
Nov 27, 2011
I was installing a software on my other laptop (it had SQL software with it) and I ran into some trouble as I got error problems that the installation of the software had failed and now whatever I do, I can't access the web! Sure enough, my wireless connection connects successfully and it indicates that I am on the "Internet" but every time I try to use either firefox or internet explorer to go to a web site, it says I don't have a connection. It is extremely odd and I don't know what it might be
View 6 Replies
View Related
Nov 16, 2011
ON WINDOWS 7 every 30 minutes or so i notice that "turn off network discovery and turn off file and printer sharing keeps resetting to ON" this is odd? i have to keep going and turning them off manually all the time.
View 2 Replies
View Related
Dec 26, 2012
There are 3 laptops in my house including mine, and i keep losing network/internet access every couple of minutes so I have to go to the router, unplug the device, and plug the device back in every couple of minutes, usually 10-15, although it varies, and the same has been going on with the two other laptops, so it's not just my laptop.
View 1 Replies
View Related
Sep 21, 2011
My team has installed a 1905 series router at one of our offices. It has been connected through lease line to our servers at our head quarters. When we start internet access it slows down and subsequently it hangs. When we log into the router and start verifying its configuration it hangs after some time. We have replaced the router but the other router is also behaving in the same way. the possible areas and settings I should look into including lease line connectivity.
View 12 Replies
View Related
Jul 24, 2011
My sis has a toshiba satellite laptop running vista and she cant go on the internet while mine and my dad's can.Her computer was able to go on the internet but then suddenly she cant. I've searched everywhere, i tried resetting the TCP/IP, setting a static IP address, even returned the laptop to factory settings, but no luck.The network page stays as: Computer----------unidentified network-------x------internet[CODE]
View 3 Replies
View Related
Dec 23, 2011
can connect to the network but not the internet. In IPCONFIG it says media is disconnected. In properties it says adapter is not connected. But I can see the network, I can ping every computer on the network, just can't get to the internet.Reinstalled all the drivers, tried renew, netsh commands, flushdns, disabled & reenabled. 2 other computers connect to the internet and each other with no problem. Can connect to other WI Fi's too, but still no internet access.
View 8 Replies
View Related
Feb 18, 2012
I am running a VPN server on my desktop at home, with all the default settings, and i checked the box that allows clients to connect over the internet. this is win7 x64 computer. I opened up port 1723 with PPTP protocol on my E4200 router.On the client i am running win7 x64 as well. I am able to connect to the vpn, from another internet connection, but there is no local network acess. It says the status is No Internet Access. and the IP that is assigned is the 169.x.x.x one that windows defaults when it doesnt find a dhcp server.How can i get the client to connect with full local network access. Right now being connected to the vpn, it means nothing, i have no access other than being "connected".
View 1 Replies
View Related
Aug 18, 2012
After a couple of hours using the internet, the connection stopped. The wireless router still had an 'Excellent' signal, but it also said I had no internet access. All of the other wireless devices in my house connect to the internet perfectly, including when right next to the laptop.I've tried disabling the firewall and resetting the computer a few times, but nothing seems to pick up the internet access. The troubleshooting guide tells me that it is a problem with the wireless modem, but quite obviously that isn't true.
View 4 Replies
View Related
Apr 1, 2013
It is a Satelite 733. Have pinged without any response however the wifi or hardwire will show connected to the local net.I have four other units surfing the web fine and wifi picks up ok except for one unit that my neighbor need will not connect no matter what. Have updated all the drivers, uninstalled and re-installed devices, reset ip, dumped the dns several times, etc.So here is the ipconfig stuff....ignore the cable connect I only have the wifi on at the moment. I have stared at this to the point where I know naathing .Is the tunnel adaptor the indication that the card is out? Oh and I tried taking out IPV 4 on both channels and nothing so I left one with 4 on and the other with it off just as something else to try. [code]
View 2 Replies
View Related
Aug 19, 2012
I have a new Alienware X51 running Win 7. It's connected to a home LAN, both wired and wirelessly. For the prior two days internet connectivity has been fine. Today, the PC will not connect to the internet. The Network and Sharing center in control panel shows that the PC is connected to both the wireless network and the wired network, but with no internet connectivity. All other computers and devices in the house are able to connect to the internet. Tried restarts, virus scans, router power off/on, ipconfig /release and renew, all with no luck. When I try and ping other computers in the LAN or the router I get a "General Failure" message.
View 8 Replies
View Related
Jul 31, 2012
I have a Windows 7 computer that was built by ibuypower. It's great, but I ordered a rosewill wireless adapter for it and noticed that my connection strength and speed are both pretty terrible. I went on amazon and bought a TP-Link wireless adapter(TL-WN822N). I installed the most recent "V2" drivers from their website and upon disabling my rosewill adapter and enabling the new TP-Link adapter, I was able to connect to the network, but not access the internet. I have tried power cycling the router, using the reset switch on the router, restarting my computer, and a bunch of commands that I found on this site. Is it possible that I have a defective adapter?
Also, some more information: My isp is comcast and the router is from them as well. Here is my ipconfig /all log for the rosewill adapter(internet access):
Quote:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Trauma
[Code]......
View 10 Replies
View Related