Windows 7 Connects To Home Network But No Internet Access
Apr 1, 2013
It is a Satelite 733. Have pinged without any response however the wifi or hardwire will show connected to the local net.I have four other units surfing the web fine and wifi picks up ok except for one unit that my neighbor need will not connect no matter what. Have updated all the drivers, uninstalled and re-installed devices, reset ip, dumped the dns several times, etc.So here is the ipconfig stuff....ignore the cable connect I only have the wifi on at the moment. I have stared at this to the point where I know naathing .Is the tunnel adaptor the indication that the card is out? Oh and I tried taking out IPV 4 on both channels and nothing so I left one with 4 on and the other with it off just as something else to try. [code]
View 2 Replies
ADVERTISEMENT
Feb 18, 2012
I am running a VPN server on my desktop at home, with all the default settings, and i checked the box that allows clients to connect over the internet. this is win7 x64 computer. I opened up port 1723 with PPTP protocol on my E4200 router.On the client i am running win7 x64 as well. I am able to connect to the vpn, from another internet connection, but there is no local network acess. It says the status is No Internet Access. and the IP that is assigned is the 169.x.x.x one that windows defaults when it doesnt find a dhcp server.How can i get the client to connect with full local network access. Right now being connected to the vpn, it means nothing, i have no access other than being "connected".
View 1 Replies
View Related
Oct 25, 2011
I'm working at a high school which has pretty large grounds. The network is configured via one central router and a lot of access points. Recently, they shut down my access point for a moment after connecting it again. The access point works fine (after finding my problem we've tested a lot of computers and they all connect to it and the internet). My laptop and my desktop - the only computers connected to access point when it was rebooted - do not connect to this access point however!
Instead, they "choose" to connect to an access point farther away, so that my signal strength is extremely low (and hence, my internet connection is very poor).How do I get my computers to connect to the previous access point with the strong signal?
The laptop runs Windows 7 32-bit and the desktop runs Windows 7 64-bit.
View 5 Replies
View Related
Feb 12, 2011
My laptop is able to connect to the wireless router in my home, but the browser will never load a page, status is shown "connected". However, when I try on other laptops, they are able to surf the net. I have tried using my laptop at my friend's place with a different wireless router and it works at his place as I was able to surf the internet through my wireless! So, I've tried resetting my personal modem to factory default and it still doesn't work!
View 2 Replies
View Related
Aug 18, 2012
I have a Dell XPS 8300 desktop and have been having issues with the modem connecting to the wireless network just fine but, I'm not able to access the internet. This has only occurred over the last 24 hours and is frustrating. I've read some other recent posts and have gone back and done the System Restore to before the installation of Windows Updates a day or so ago and that has worked twice today. But I'm not a PC expert and I would like to know how I could resolve this issue permanently without having to undo the updates with System Restore every time I power up and log in. How do I figure out what setting is being undone to disconnect the internet connection from my XPS 8300?
View 5 Replies
View Related
May 24, 2011
I have a wireless network set up in our small office. I just bought the DIR-655 and installed it (did have a very old Netgear router). I currently have two wireless printers, a MAC and a couple of iPhones that can connect to the network and internet. My desktop is plugged in and also connects fine.The BOSS just came in with his fairly new Win7 laptop and I connected it to the network, however, no matter what I try, it won't connnect to the internet. I can see his laptop in the network, it can see my computer and it says that it is connected to the network. It also says that it is not connected to the internet. I ran the troubleshooting (by clicking on the "X" between the network and the internet in the Network and Sharing Center) and it said it couldn't find the problem. The Win7 laptop has no problems connecting to the old network, nor any others that it encounters.
View 1 Replies
View Related
Dec 23, 2011
can connect to the network but not the internet. In IPCONFIG it says media is disconnected. In properties it says adapter is not connected. But I can see the network, I can ping every computer on the network, just can't get to the internet.Reinstalled all the drivers, tried renew, netsh commands, flushdns, disabled & reenabled. 2 other computers connect to the internet and each other with no problem. Can connect to other WI Fi's too, but still no internet access.
View 8 Replies
View Related
Jul 31, 2012
I have a Windows 7 computer that was built by ibuypower. It's great, but I ordered a rosewill wireless adapter for it and noticed that my connection strength and speed are both pretty terrible. I went on amazon and bought a TP-Link wireless adapter(TL-WN822N). I installed the most recent "V2" drivers from their website and upon disabling my rosewill adapter and enabling the new TP-Link adapter, I was able to connect to the network, but not access the internet. I have tried power cycling the router, using the reset switch on the router, restarting my computer, and a bunch of commands that I found on this site. Is it possible that I have a defective adapter?
Also, some more information: My isp is comcast and the router is from them as well. Here is my ipconfig /all log for the rosewill adapter(internet access):
Quote:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Trauma
[Code]......
View 10 Replies
View Related
Sep 29, 2012
Laptop connects to wifi network. But it shows "No Internet Access" message.My Macbook connects to the internet just fine and the wifi on my iphone works as well.The ethernet on the laptop works and I am able to access the internet this way. The laptop does connect to some of the other access points but I've had issues with my router.I tried the usual debugging mechanisms - disable/enable adapter, reset the router, reset the tcp/ip stack. [code]
View 1 Replies
View Related
Sep 26, 2012
I have an E4200, and upgraded to Connect Cloud. It was buggy, and so I downgraded to the firmware before that. I have all the computers working fine in the house except my desktop. it connects fine to the network, can see the other computers on the network, can even do a windows update. But when I go to use google chrome or internet explorer it just wont access the internet. It doesn't seem to work either if it is a wired connection, or a wireless connection It was fine before the upgrade and subsequent downgrade. It was on this desktop that i installed and uninstalled thew Connection cloud. I know enough to set up the network but when it doesn't work
View 4 Replies
View Related
Aug 12, 2011
Three PC's all Win 7. Networking/Homegroup problem. In Network RV711 can see and access RC710 & Akoya. RC710 can see and access RV711 & Akoya. Akoya can see and access RV711. Akoya can see RV711 but not access RC710. Under Network Akoya can see RC710 but “You do not have permission to access...
In Homegroup. RV711 can see and access RC710 & Akoya. RC710 can see and access RV711 & Akoya. Akoya can see and access RV711. Akoya can see RC710 but not access RC710. Under Homegroup No other homegroup computers are available. In Homegroup the identical password is displayed on each PC. The Akoya is wired, the others are wireless. Summing up the Akoya cannot access the RC710.
View 5 Replies
View Related
Nov 4, 2011
I have a compaq preario running on windows 7 ultimate.It has been working well with the internet connection but recently it stopped connecting to the internet.It recognizes other computers in the network but the internet connection is not available.
View 1 Replies
View Related
Oct 27, 2011
I'm trying to set up a windows 7 laptop and a vista computer on a home network.The vista computer accesses the lptop fine,but the laptop has the computer in the network,when you do a full map, but won't access any files. The cursor changes to a hand over the laptop name in full map, but doesn't on the vista icon?
View 5 Replies
View Related
Apr 14, 2012
Been wondering what would make a LAN only run on 10mbps. I recently experienced this on two clients sites. It won't just connect when I configure the LAN to run on 100mbps. Only connects on 10mbps. What could be responsible for this? Won't this affect the performance of ones application?
View 5 Replies
View Related
Dec 28, 2011
My Wireless connection used to work for my laptop then i let my mom use it at her house and now the wireless connection will only work at her house. it won't connect anywhere else and i can't figure it out.
View 1 Replies
View Related
Feb 15, 2013
I've been able to duplicate my problem by using another WinXp computers instead of a USB drive plugged into my router. Same exact problem. So, the bottom line is that I can access (and modify) the files across the network if I'm doing so manually, but my Windows service fails when trying to do the same thing. If I run the program through Visual Studio, it works. If I run that same exact code as a Windows service, it fails.
I've created a Windows service that needs to access a common network location. To test it at home, I plugged a USB drive into my Netgear N600 WNDR3400 router. The USB storage settings show the workgroup name as Workgroup, and the file path is. [code]
View 1 Replies
View Related
Jan 26, 2012
i would like to know that how to stop internet access through network complete internet access
View 2 Replies
View Related
Apr 29, 2011
I am not sure what the problem is but my laptop wont connect to the wireless in my office, it connects fine to my wireless network at home..
View 13 Replies
View Related
Feb 12, 2011
My laptop is able to connect to the wireless router in my home, but the browser will never load a page, status is shown "connected". However, when I try on other laptops, they are able to surf the net. I have tried using my laptop at my friend's place with a different wireless router and it works at his place as I was able to surf the internet through my wireless! So, I've tried resetting my personal modem to factory default and it still doesn't work.
View 15 Replies
View Related
Jul 5, 2012
I use vmware workstation, and doing small networking project.i use 1 windows server 2008 x64 sp1 as DC, DNS and DHCP with 2 nic(1 nic for local(vmnet2) and 1 for internet(NAT)) and i use 1 windows 7 client machine.in server local nic settings are ip 200.200.200.1 sm 255.255.255.0 gw: empty dns 200.200.200.1
and internet nic settings all set automatic.and in DNS i added forwarder as my company's actual DNS server name.My requirement is client should browse internet by resolving through my dns server.but the problem is my server is having internet but my client windows 7 does not have internet
View 6 Replies
View Related
Sep 8, 2011
Since yesterday im unable to connect to the wireless connection in my dormsI'm able to connect but i get yellow triangle with exclamation mark in it, and it says "no internet access".In the living room im able to gain internet access, my friend also tried in my room and he was able to get internet access, he has tp-link adapter on his laptop.I have dell vostro 3500 with "DW1051 wireless-N WLAN half-mini card" as my adapter.I opened IE9 and pressed "Diagnose connection problems" and got the messege "Wireless Network connection" does not have valid IP configuration.OS: windows 7 ultimate x64
View 6 Replies
View Related
Feb 8, 2012
i have an internet connection thrw USB from a ppp adapter from there i've made a netowrk with another computer now on the client computer from my network i have XAMP server who i want to be accessed from the internet .i have subdomain like radionis.zapto.org (192.168.0.2) registered at no-ip.org.now what IP i have to introduce there to make my server accessible
View 2 Replies
View Related
Jun 30, 2011
I have been using a laptop to stream videos through my xbox for over 2years until recently. I setup a wireless network in the house to do this. All was fine until 3 days ago.I use a Dell Inspiron 1545 with Windows 7. I have a Dell Wireless 1397 Minicard, a cisco router (model #2425). Since my laptop was infected by Malware, my network has not worked since. I downloaded Malwarebytes Anti Malware to get rid of it and it appeared to work. I got internet access back. However, I still cannot connect to my network (visible in the Available Network list as normal) or stream any media.Windows Media Centre also has stopped opening and gives me the small box saying 'windows is checking for a solution', then closes with nothing. I can however open WMC if I right click and 'run as administrator'?! I have disabled all other network adaptors, only the Dell minicad is enabled and also tried disabling and enabling this main one with no effect. All problems point to the fact that my laptop can no longer connect to the home network but I cant figure out why?!Another (possibly unrelated) problem is occuring at boot up where I get an error message saying 'Bluetooth Software License not found. [2]' - Again this never happened before the Malware infection.
View 1 Replies
View Related
Aug 29, 2011
I have a windows 7 computer that was connected wirelessly to my router and internet worked fine. One day i woke up and the internet would not work. The computer is still connected to the router but no internet access.There are other computers on the network that connect fine.I have also tried connecting my computer directly to the modem and still no internet.Running windows diagnositc tells me there is no default gateway available. Ive cycled the modem and router probably a million times and even taking the pc to another house to try on a different router and still no go.
View 5 Replies
View Related
Aug 23, 2012
I have a Lenovo G570 model 4334(i3) and it is connecting to my wireless network but has no internet connection ( an alert sign on signal bars appears). I tried turning off, reseting my router and nothing happens. Also, a desktop(direct connection), a laptop and my Galaxy SII connect to wifi without a problem.
View 3 Replies
View Related
Sep 4, 2012
I have a new ish Dell laptop with Windows 7 We recently got a new router in our house however it will connect wirelessly only eith ethernet cable.The other laptops in my house work fine but not mine!Mine is the newest Every now and again if i reset the box it works but only for 1 minute.I have tried most common testing I've seen on my laptop and used my suppliers handbook etc..
View 2 Replies
View Related
Apr 27, 2012
I managed to flash my router (Belkin Sharemax N300) to dd-wrt and set it up as a repeater using these steps in the wiki, but I can't access the internet via the repeater. I can still connect to it, though. I don't know that much about networking.
View 1 Replies
View Related
Jun 19, 2011
Currently I'm living in a dorm. The house has wireless network. But WEP encryption is used to secure it. I know this method is not safe. Also since there are many people are living in the house i don't want my computers be connected to this network.What i want to do is to setup my own network. I bought a NetGear DGND3300 router. I setup a WPA2 protected wireless network. I can connect all my devices to this network but naturally this way i have no Internet access.Is there a way to use Internet access of the house's router but still keep my local traffic not seen by anybody else
View 2 Replies
View Related
Apr 22, 2012
I'm a member of a club and we have just got BT Business Broadband with BT Business Hub 3. The club has one WiFi laptop which will occasionally access the BT Hub 3 using WiFi for internet use only. So essentially we have no network as such, just the BT Hub and a laptop.I would like to allow some club members to have internet access (WPA2 password), but without allowing access to the club laptop in any wayAs I said previously, the club laptop will only be active occasionally, so actual exposure is limited, but ideally I would like for the club laptop to be invisible to others when it is connected. I would also like each members equipment to be hidden from each other, so nobody can access each others data etc.. Can I achieve this simply? If so, do I need extra equipment?
I do have some donated equipment available: Netgear WAG102 Wireless Access Point, D-Link DSL-2640R Broadband Wireless G ADSL2+ Router and US Robotics 9106 SureConnect ADSL Wireless Gateway. Could I use any or all of these?I know this donated equipment is only Wireless G, but speed for the members is not important as they will only use internet access for emails and occasional google searches etc.I've tested the WAG102 at home, by plugging it into a LAN port of my BT HomeHub3 and giving it a different SSID, which works OK, but I can still see the other equipment connected wirelessly to my BT HomeHub3, although I cannot access my home laptop etc. because they are password protected.
View 3 Replies
View Related
Nov 24, 2011
Orange sent me a replacement Netgear DNG1000 and from the moment I had it there was issues, if N mode was enabled and I had to set it to B/G only for it to have a stable connection, not a problem as I only use it for the internet. The range on it was roughly the same as the livebox. For a few weeks it worked fine until recently it started to go insane, on the main computer the wifi works most of the time with 80%-95% signal strength, and then every now and then it will suddenly lose communication with the router but act as if it was connected for 5-10 minutes, signal strength is still at about 90% yet I can't access the router or the internet. Wifi works fine at full speed on the stairs, drops to a few bytes per second on the landing and then increases back up to full speed in the room next to it. In the one bedroom the wifi works up until the door where it instantly drops from full speed to a few bytes a second. This drop off point is only a few cms, as in full speed at one place, move it back a few cm and it slows down loads, but I still get 4-5 bars on windows and -50 RSSI on inSSIDer, about 94% strength and a link quality which tends to fluctuate. What could be causing this, specifically the weird instant deadzones and randomly not responding.
View 1 Replies
View Related
Jun 17, 2011
I would like to have the ability to turn off the internet access to my teens computers without effecting myself. I have parental controls on my computer which work great, but this does not work to the other computers that are able to connect wirelessly. I have a router but I am not sure how to access it.
View 3 Replies
View Related
Aug 23, 2011
i'm having an issue with a computer on my home network (Windows XP Professional SP3, latest updates) where i can't access the Internet or even the router on my home network (which it is part of).if i look at the network connection (wired) under control panel it shows as connected, and it's set with a static IP address (always has been), so nothing looks out of the ordinary there, yet if i try opening Internet Explorer i just get the "page cannot be displayed" page, and i can't even ping my own router- request times out.I've tried connecting a wireless adapter that i use on my laptop every day.. it connects to the wireless network no problem, but still the same results with IE and pinging the router.
View 4 Replies
View Related
Jan 31, 2013
I am experiencing problems trying to access my routers HTTP-type configuration. I have a Billion 400G router. The address to access the router was always http://10.0.0.2 and that has always worked. A dialog box would appear asking for a username and password. Now it doesn't even reach that screen. It says that the connection timed out. I've tried Firefox/Chrome/IE10. To no avail. My system: Windows 8 build 9500. Also something weird. When I type in this Microsoft thing comes up with IIS 8.
View 2 Replies
View Related
