I woke up and my computer just refused to connect to internet. My roomates computer connects fine to the same modem (we use adsl). I tried switching cables and ports. The night before, my computer had an unexpected shutdown...
View 1 RepliesI have recently bought a new computer and have been happily connected to my wireless network for three months. The other day the connection was lost and now I cannot connect to my wireless or parents wireless networks. I can connect via the ethernet only. I will attatch an ipconfig for you to have a look at when I am not connected can see my wireless network connections however when I tempt to connect it says windows cannot manage it. I am running windows 7 home premium 64 bit[CODE]
View 2 Replies View RelatedMy Dell Dimension is no longer connecting to the internet via the wireless router. I have a dlink DI-524 and a dlink wireless USB key but it no longer connects. This just started today. When I try to repair the connection, it fails on "renewing IP".
OS is Windows XP.
P.S. I have tried power cycling the modem/router but nothing works. Other computers can get on the internet via the wireless router fine.
One of my laptops (Acer Aspire 5741) won't connect to the internet, it stopped connecting last night at around 9pm UK time. It shows an ! in a triangle over my Internet Access bars. When I troubleshoot the message is 'Your broadband modem is experiencing connectivity issues'. My Compaq mini netbook is not experiencing any problems though. I have tried resetting the router, removing and readding the home network and checking the security key is correct -I do also have a VPN from my university which has been installed since April without any problems. Both the laptop and notebook use windows 7 and Firefox.
View 3 Replies View RelatedMy lap top and other desktop are able to detect the internet but not my main computer with this router.
View 2 Replies View RelatedI upgraded the firmware on my BEFS41 v4.3 to the Ver.2.00.4 Build 8, off the cisco website. After I received the successfully upgraded message, I could no longer connect to the internet, nor could I connect to the router's configuration page. I tried to do a few hard resets and connecting it to other computers to see any other computers could connect to it, no luck. I tried connecting one computer just to the router, without the internet plugged in, and tried to ping 192.168.1.1 but I received a "transmit failed, error code 1231." Is there anyway I can access this and change the firmware, or am I screwed?
View 3 Replies View RelatedI'm working with a friend out with his computer, and he can't connect to the internet, but i can.But he uses a different computer system than me and turning on the wireless networking.
View 1 Replies View RelatedI'm using a wireless adapter with my xbox because for some unexplainable answer the wired ethernet port quit working, but when my dad uses the internet on his wired pc I get booted off xbox
View 1 Replies View Relatedmy computer only connects to the internet in safe mode
View 3 Replies View RelatedI have a windows 7 computer that was connected wirelessly to my router and internet worked fine. One day i woke up and the internet would not work. The computer is still connected to the router but no internet access.There are other computers on the network that connect fine.I have also tried connecting my computer directly to the modem and still no internet.Running windows diagnositc tells me there is no default gateway available. Ive cycled the modem and router probably a million times and even taking the pc to another house to try on a different router and still no go.
View 5 Replies View RelatedI am having a weird problem with one of my network PC's. I admin a small network which I inherited at work but am a novice when its comes to networking hardware.One of the PC's suddenly stopped connecting to the internet on Fri night, as the cables have all been run through the roof I went through every cable on the D-Link 10/100 ethernet switch and could not get it to connect. Connection wizard showed it was sending packets whenever I tried to ping but recieved 0.
View 14 Replies View RelatedWe have a Belkin N300 router connected to the internet through a cable modem(Comcast). Up until yesterday it worked fine for all the devices connected. But now whenever my brother's laptop connects(wireless) to the network it makes the router lose connection to the internet so all the devices connected lose connection, too obviously. Everything shows connected to the router, but the router releases it's DHCP whenever he connects. As soon as he turns off his wifi or manually chooses to disconnect... the internet fires right back up within a minute or so. We have no idea what is causing this. We did notice that his laptop was trying to connect with IPV6 while everything else was using IPV4
View 2 Replies View RelatedJust purchased a new computer. Old one has a Lynksis wireless router. Tried to connect the old one and can't get internet.
View 1 Replies View RelatedI am with Virgin media (UK) and have the 20mbps fiber optic connection. My area has recently been having problems with the broadband and Virgin has recently fixed these problems. However I used to get around 19mbps now that the problem is fixed my computer which is wired to the router gets about 0.4mbps downstream... However the 5 wireless computers all get 16mbps which is pretty good for them. Windows tells me that its a firewall issue and I currently can't use two programs, spotify and steam. They both have firewall issues, even if I turn off my firewall which is the windows one. I also have avast, and when I turn that off, still no good. I used OpenDNS, stopped using that flushed my DNS, that didnt work. I tried to optimize my computer settings, by changing various values in Regedit.All of this has done nothing. I should add that I have recently re-installed Windows 7 so on this fresh install it has never had decent internet speed. Which I thought was weird.. I have basically had these problems since the fresh install. All of my drivers are up to date.
View 10 Replies View RelatedMy computer connects to the internet but when i try to get it on it pops up webpage cant be displayed.Then when i diagnose the problem it says somethings wrong with my proxy server ive followed the instructions.
View 2 Replies View RelatedWe have a fairly new (about two weeks) wirless network set up in our home consisting of a Netgear modem (with wifi, which I have disabled) connected to a Belkin N wireless router. Our ISP is Optus.
My laptop (which is running Windows Vista service Pack 2) was connecting fine since we set it up until about 2 nights ago. Since then, it has had trouble connecting to the network (windows tells me it's taking longer than usual) and when it finally does, I have limited or no connectivity.The internet works fine when the laptop is connected directly to the modem, and if I unplug the wire, it stays connected to the network wirelessly for several minutes before it drops the signal.
At first I thought it was because I was using the laptop at the back of the house (with the modem and router being at the front), perhaps the signal experiencing interference, but no matter where in the house I try to connect, it has problems.I also tried updating the drivers and uninstalling/reinstalling the drivers for the adapter in the laptop, with no luck.
P.S.
Xirrus pictures =
1. taken from the back of the house (not connected to the network) where the laptop is used a majority of the time. Although the strength isn't the best, there didn't seem to be any problems in the two weeks prior to this.
2. taken from the same room as the modem and router, connected to the network, but with "limited/no connectivity"
Command Prompt:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all[code].....
I have a printer connected to another computer (Win XP) and it wasn't showing up on the network so I followed some installation process to install a network driver or something. Now the printer is working fine. BUT... Now that computer is having internet problems. It connects to the internet fine but some programs say it doesn't. Like Microsoft Outlook. A message always shows up saying "Must work offline" or something. And I cant listen to some things on the internet because a message comes up saying you must connect to the internet.
View 8 Replies View RelatedA couple weeks ago my HP laptop stopped working. It would not boot and I had to put in the recovery discs to get it working again. Before this the laptop had connected fine to my home wifi secured with WPA2-PSK[AES]. After this problem tho it refuses to connect while it is secured. When not secure it functions fine and I am currently using it to type this post. I would have no problem continuing to use the wifi unsecured but another member of my household works with confidential medical information from home and is worried about the lack of security. I have attempted the trouble shooting tips on the support website already. My computer model is HP G60-235DX and the router is a Netgear N300 model WNR2000v3[CODE]
View 4 Replies View RelatedA business network has had a Static IP Address for several years. Recently, something caused the settings to be changed to "Obtain an IP Address Automatically". As a result, pcAnywhere will no longer connect, and this is a critical function of the office. This has to get fixed. I've attempted to put the settings back to what they were (The IP Address, Subnet Mask, Default Gateway, etc...) but now the Server will no longer connect to the internet when you setup the Static IP. The settings I am using are exactly the same as the ones from over 2 years ago. Now they no longer work, and networking is confusing to me.
View 4 Replies View RelatedMy E4200 router no longer accepts any WIRED connections. I can connect from the modem to the computer and everything works as expected. I can connect other computers wirelessly to the router. I cannot connect any laptops WIRED to the router. Nothing has changed on the systems to restrict internet access. There is something wrong with the router and the WIRED ports. I tried going through the troubleshooting on this site but it was of little to no assistance. The Cisco Connect utility doesn't appear to accomplish anything either. My guess is because I cannot connect to the WIRED ports on the router to connect to the internet to allow for whatever troubleshooting that needs to be done.
View 2 Replies View RelatedHave two other computers that connect with ease to the Netgear wireless router, but the new computer will not access the internet. I have been searching for answers and have tried about everything I can find nuder similar posts, but I still have not internet access. At varying times, I have had "internet access", but no actual ability to load websites. Right now, I do not even have access. I am at a loss.Even at my low level of experience, I am usually able to tinker until I fix the problem, but I am about four hours in and currently seem to have taken a step backward. I cannot even begin to explain what things I have already tried
View 9 Replies View RelatedMy computer connects to an unscured wifi near my home and i have internet acces for a few minuets, then it just stoppes. Sometimes if i reconnect it will run for a few more minuets 5-10. I have tried two different computers with same results. about a month ago the connection worked fine. This just started recently.I can connent and access internet at other public places with no problem. It seems only this network i have trouble with, why?I am running XP on one, and Win 7 on other, same results.I have read alot of things and tried them all,
-resetting internet options
- changing tcp/ip
- system restore with no results.
I have wireless internet at home through a Belkin router.It used to work fine but one computer wouldnt connect. I tried checking the security password on my laptop and ever since it won't connect. (However, now the other computer does!) It picks up the signal from the router but just won't connect. When I run ipconfig I get a message saying Media Disconnected. I've searched forums and can't find an answer to this.The laptop still connects to the wireless internet in my office so the wireless capability obviously still works.
View 3 Replies View RelatedMy Compaq tc1100 tablet worked perfectly, wirelessly, with our Billion BiPAC 7300NX/N ADSL2+ router, but then it just stopped doing this for no reason that I can think of. In our house is a desktop in each of the 3 bedrooms (one being mine, together with the tablet) that connect perfectly wirelessly to this same router. When I refresh the network list, then one moment it will show my network, and then seconds later when I refresh again, it will give "no networks were found in range".Switching off the router's WLAN security made no difference. Formatting and reloading XP, and installing the tablet's Wireless LAN drivers, made no difference. Moving the tablet around the house made no difference. Now, today I took my tablet with me to spend the day with my wife at her workplace, where there is a Billion wireless router as well (other model). I did not bother to first try to connect with my tablet's wireless card, but instead lent a spare D-Link DWA-125 wireless USB adapter, and connected perfectly. Later in the afternoon, out of curiosity, I started up Xirrus Wi-Fi Inspector, and took a snapshot of it, which is attached here. The whole time I was connected like this, there were, in the bottom right-hand corner, two of those wireless network connection icons, one with a red cross through it.
when removing the D-Link USB adapter --- it was time to come home --- the icon with the red cross disappeared once it was pulled out; I opened IE to see what's happening, and my home page opened successfully. So, was I surfing quite fine with my tablet's own card all day?! I then shut down, switched back on (still with the D-Link removed), opened IE, and my home page appeared again successfully. I did not do any other surfing, I must admit, but just shut down again and came home, where I'm back to square-one with a continual "red-crossed icon".........Using Xirrus here on the home network, and with its "locate adapter" pinger noise thingy enabled, it will alternate between pinging for a while and then keeping quiet --- I can supply the Xirrus 500 sec history snapshot of this, if needed.Yesterday, doing a hard reset of the router *momentarily* gave me "aquiring network address", and then connection, but this soon went away again.The tablet did not have this problem with our previous Netgear router. Nothing's changed in the house: the router and my tablet have always stood where they are. There's no new cordless phones, neither. The one that we have, has always stood centimeters away from the router.
Tablet's ipconfig /all:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAdministrator>IPCONFIG /ALL
[code]....
About 2 weeks ago, my wireless adapter and ethernet port stopped working all of a sudden. When trying to diagnose, I got the Dagnostic Policy error 5. On the basis of other postings on this subject, I have tried restoring an earlier restore point, uninstalling/reinstalling the network adaptors, have tried to run net localgroup Administrators /add networkservice & /add localservice, have tried adding permissions for mpssvc in regedit (DSP parameters). For the hardwired ethernet adapter, it worked but for my wireless adapter all failed so far. Output from sc queryex DPS > 0 is as follows:
SERVICE_NAME: DPS
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 5 (0x5)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
When starting my laptop it no longer connects to the preferred network. It has been trying to connect to my neighbors unsecured network. I have tried the netsh settings but it searches for another network and will not connect to the one it is supposed to unless I force it to.
E4200 connects to wrong network.
I have a Belkin F5D8636-4 v2 N Wireless Modem Router. For some reason, it will only connect to the internet if the wired computer is plugged in and on. I tried starting the router without it plugged in and it kept trying and failing to connect to the internet. As soon as I plugged in the wired computer it connected to the internet. jhb019 has chosen the best answer to his/her question.Click here to view the answer that was selected.
View 7 Replies View Relatedhow to block a user from using the internet when they plug their computer into a router. My roommate has refused to pay her share of the internet and, being a college student, I don't have enough money where I feel generous enough to let her have free internet after stiffing me. Basically, I have 2 routers at the moment (hoping to fix this soon): my Qwest modem works as a router but I also have a Linksys router connected to it. The only phone jack is in her room so I have no way of stopping her from plugging her computer straight into the modem and/or router. I've configured the wireless so that she would be unable to access the, wirelessly but I'd like to know how to prevent her accessing the internet when she plugs her computer directly into either component.
View 2 Replies View RelatedI have a home network that uses a DLINK DIR-655 router. All of my devices ( a mix of wireless and wired) except one--a windows xp SP 3 desktop that stopped working yesterday. Some viruses, and adware were detected and it has not worked since then. What I have done.
View 11 Replies View Relatedcomputer suddenly would not acquire internet wired or wireless while at university. Local techies tried to fix but no luck. I'm trying to fix this but nothing has worked yet. Seems to be a problem aquiring an ip address. I've matched all the settings from my other dell laptop which connects no problem.
View 29 Replies View RelatedI have my pc connected to the internet with a cat5 and i can connect fine to the internet. My dads pc which is connecting to the same modem thru wireless card is saying its connected but is not able to load any websites. I have reconnected, restarted the pc and restarted the dns service but havent got anywhere with it.
View 2 Replies View RelatedI have a two year old Toshiba laptop that no longer connects to the internet either via ethernet cord plugged into the laptop nor my home wireless network. I have disabled the firewalls and the problem continues. The Network Connection screen shows the computer connected locally but not no internet connection. The laptop is running Windows Vista.
View 3 Replies View RelatedI'm trying to fix the network at a student housing building and the system is kind of a mess. We bought a new E4200 to replace our old Linksys router which no one knows the admin pw to. We have four switches for 50 connections throughout the four story house and when switching the connections over to the new E4200 all of the wired connections no longer work. Switch back to the old router and presto. How do I need to change the settings with the E4200 to get it to work?
Also, as it's a thick old house the E4200's wireless only covers maybe half of it...I purchased two wireless repeaters to put on the 3rd and 4th floors, are these simple to install with the router?