My Dell Dimension is no longer connecting to the internet via the wireless router. I have a dlink DI-524 and a dlink wireless USB key but it no longer connects. This just started today. When I try to repair the connection, it fails on "renewing IP".
OS is Windows XP.
P.S. I have tried power cycling the modem/router but nothing works. Other computers can get on the internet via the wireless router fine.
I have recently bought a new computer and have been happily connected to my wireless network for three months. The other day the connection was lost and now I cannot connect to my wireless or parents wireless networks. I can connect via the ethernet only. I will attatch an ipconfig for you to have a look at when I am not connected can see my wireless network connections however when I tempt to connect it says windows cannot manage it. I am running windows 7 home premium 64 bit[CODE]
View 2 Replies View RelatedI woke up and my computer just refused to connect to internet. My roomates computer connects fine to the same modem (we use adsl). I tried switching cables and ports. The night before, my computer had an unexpected shutdown...
View 1 Replies View RelatedI have wireless internet at home through a Belkin router.It used to work fine but one computer wouldnt connect. I tried checking the security password on my laptop and ever since it won't connect. (However, now the other computer does!) It picks up the signal from the router but just won't connect. When I run ipconfig I get a message saying Media Disconnected. I've searched forums and can't find an answer to this.The laptop still connects to the wireless internet in my office so the wireless capability obviously still works.
View 3 Replies View RelatedMy lap top and other desktop are able to detect the internet but not my main computer with this router.
View 2 Replies View RelatedWhen starting my laptop it no longer connects to the preferred network. It has been trying to connect to my neighbors unsecured network. I have tried the netsh settings but it searches for another network and will not connect to the one it is supposed to unless I force it to.
E4200 connects to wrong network.
About 2 weeks ago, my wireless adapter and ethernet port stopped working all of a sudden. When trying to diagnose, I got the Dagnostic Policy error 5. On the basis of other postings on this subject, I have tried restoring an earlier restore point, uninstalling/reinstalling the network adaptors, have tried to run net localgroup Administrators /add networkservice & /add localservice, have tried adding permissions for mpssvc in regedit (DSP parameters). For the hardwired ethernet adapter, it worked but for my wireless adapter all failed so far. Output from sc queryex DPS > 0 is as follows:
SERVICE_NAME: DPS
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 5 (0x5)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
I have an issue with my work laptop connecting to my home network. It will connect to the internet but only briefly and then the connection is dropped. I reset or repair the connection and I can get it to re-connect but then it drops again after only a minute or two. I tried to connect it to the router directly with a cable (turned wireless off) and had the same issue. This laptop has no issues connecting wirelessly at work or to other wi-fi networks I have tried. I have another laptop in the house that has no issues connecting to the home network & internet. The issue seems only to be with this laptop at home. The laptop is a Dell using 64 bit Vista. The router is a D-link DI-524, 802.11g router and I have a DSL connection.
View 1 Replies View RelatedI bought a Linksys E1000 wireless router a year or so back. it was loaded onto a computer that no longer works. i have the router and the box but no disc or manual. My laptop and ipad are working fine with the router but i can't get my iphone hooked up and dont think i have the correct password. I dont have any software on my laptop to even figure it out. What can i do to get my phone to use the router?
View 1 Replies View RelatedI have a dlink(wireless n-300) router going through a netgear wireless g router, i have an intel wifi link 5100 agn in my acer aspire 6930g laptop & the isp is high speed cable (Shaw cable). My question is, why does my computer have to reset the router every minute or so? It takes forever to get anything on the web which could be Bitdefender 2012 plus security?
View 1 Replies View RelatedHave two other computers that connect with ease to the Netgear wireless router, but the new computer will not access the internet. I have been searching for answers and have tried about everything I can find nuder similar posts, but I still have not internet access. At varying times, I have had "internet access", but no actual ability to load websites. Right now, I do not even have access. I am at a loss.Even at my low level of experience, I am usually able to tinker until I fix the problem, but I am about four hours in and currently seem to have taken a step backward. I cannot even begin to explain what things I have already tried
View 9 Replies View Relatedthere has been issues with this router, and I wonder if any of you have issues connecting to the 5ghz when you wake your pc from sleep longer than an hour. For some reason when I put my computer to sleep at night and wake it up in the morning, my computer will not connect to 5ghz. It will work fine with 2.4, both are set in auto, so I dont see any issues. I did try to put 5ghz to a manual setting; wpa2, 40 mhz, and channel 161. I still get the same results. I am doing something wrong or is the router's 5ghz faulty?Also when is the new firmware coming, I am getting sick of my Harddrive being awake 24/7, its killing the harddrives life span and wasting electricity. I should put this in another post, because they should really change the media server to Wild Media Server or Serviio it would be alot better.
View 7 Replies View Relatedtrying to connect an old PC to my home wireless network.I brought home a PC I have used for years at my office. I have it configured with a Realtek wireless card and was able to connect it to my office wireless network without a problem.But, when I try to set it up at home, it won't take. I have a dlink router that is working fine with several Mac computers in my home, so I know the router and network are up and running fine.The PC uses Windows XP. The icon in the lower right corner says dlink is connected and there is strong signal strength. However, when I check the dlink status, it shows that 2,573 "packets" are sent, while "0" are received.I've tried to connect to the internet using Mozilla, Safari, and Explorer. Each says the server cannot be found and that the internet is not connected.
View 5 Replies View RelatedA couple weeks ago my HP laptop stopped working. It would not boot and I had to put in the recovery discs to get it working again. Before this the laptop had connected fine to my home wifi secured with WPA2-PSK[AES]. After this problem tho it refuses to connect while it is secured. When not secure it functions fine and I am currently using it to type this post. I would have no problem continuing to use the wifi unsecured but another member of my household works with confidential medical information from home and is worried about the lack of security. I have attempted the trouble shooting tips on the support website already. My computer model is HP G60-235DX and the router is a Netgear N300 model WNR2000v3[CODE]
View 4 Replies View RelatedA business network has had a Static IP Address for several years. Recently, something caused the settings to be changed to "Obtain an IP Address Automatically". As a result, pcAnywhere will no longer connect, and this is a critical function of the office. This has to get fixed. I've attempted to put the settings back to what they were (The IP Address, Subnet Mask, Default Gateway, etc...) but now the Server will no longer connect to the internet when you setup the Static IP. The settings I am using are exactly the same as the ones from over 2 years ago. Now they no longer work, and networking is confusing to me.
View 4 Replies View RelatedMy Compaq tc1100 tablet worked perfectly, wirelessly, with our Billion BiPAC 7300NX/N ADSL2+ router, but then it just stopped doing this for no reason that I can think of. In our house is a desktop in each of the 3 bedrooms (one being mine, together with the tablet) that connect perfectly wirelessly to this same router. When I refresh the network list, then one moment it will show my network, and then seconds later when I refresh again, it will give "no networks were found in range".Switching off the router's WLAN security made no difference. Formatting and reloading XP, and installing the tablet's Wireless LAN drivers, made no difference. Moving the tablet around the house made no difference. Now, today I took my tablet with me to spend the day with my wife at her workplace, where there is a Billion wireless router as well (other model). I did not bother to first try to connect with my tablet's wireless card, but instead lent a spare D-Link DWA-125 wireless USB adapter, and connected perfectly. Later in the afternoon, out of curiosity, I started up Xirrus Wi-Fi Inspector, and took a snapshot of it, which is attached here. The whole time I was connected like this, there were, in the bottom right-hand corner, two of those wireless network connection icons, one with a red cross through it.
when removing the D-Link USB adapter --- it was time to come home --- the icon with the red cross disappeared once it was pulled out; I opened IE to see what's happening, and my home page opened successfully. So, was I surfing quite fine with my tablet's own card all day?! I then shut down, switched back on (still with the D-Link removed), opened IE, and my home page appeared again successfully. I did not do any other surfing, I must admit, but just shut down again and came home, where I'm back to square-one with a continual "red-crossed icon".........Using Xirrus here on the home network, and with its "locate adapter" pinger noise thingy enabled, it will alternate between pinging for a while and then keeping quiet --- I can supply the Xirrus 500 sec history snapshot of this, if needed.Yesterday, doing a hard reset of the router *momentarily* gave me "aquiring network address", and then connection, but this soon went away again.The tablet did not have this problem with our previous Netgear router. Nothing's changed in the house: the router and my tablet have always stood where they are. There's no new cordless phones, neither. The one that we have, has always stood centimeters away from the router.
Tablet's ipconfig /all:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAdministrator>IPCONFIG /ALL
[code]....
One of my laptops (Acer Aspire 5741) won't connect to the internet, it stopped connecting last night at around 9pm UK time. It shows an ! in a triangle over my Internet Access bars. When I troubleshoot the message is 'Your broadband modem is experiencing connectivity issues'. My Compaq mini netbook is not experiencing any problems though. I have tried resetting the router, removing and readding the home network and checking the security key is correct -I do also have a VPN from my university which has been installed since April without any problems. Both the laptop and notebook use windows 7 and Firefox.
View 3 Replies View RelatedI have a windows 7 computer that was connected wirelessly to my router and internet worked fine. One day i woke up and the internet would not work. The computer is still connected to the router but no internet access.There are other computers on the network that connect fine.I have also tried connecting my computer directly to the modem and still no internet.Running windows diagnositc tells me there is no default gateway available. Ive cycled the modem and router probably a million times and even taking the pc to another house to try on a different router and still no go.
View 5 Replies View RelatedWe have a Belkin N300 router connected to the internet through a cable modem(Comcast). Up until yesterday it worked fine for all the devices connected. But now whenever my brother's laptop connects(wireless) to the network it makes the router lose connection to the internet so all the devices connected lose connection, too obviously. Everything shows connected to the router, but the router releases it's DHCP whenever he connects. As soon as he turns off his wifi or manually chooses to disconnect... the internet fires right back up within a minute or so. We have no idea what is causing this. We did notice that his laptop was trying to connect with IPV6 while everything else was using IPV4
View 2 Replies View RelatedJust purchased a new computer. Old one has a Lynksis wireless router. Tried to connect the old one and can't get internet.
View 1 Replies View RelatedI just installed Tomato firmware (details below) on my wireless-N router and everything appears to be working fine on the router's end. I can connect to the Internet properly with a wired (Ethernet) connection; in fact, that's how I posted this question.
What I cannot do is connect to the router wirelessly in any way. At first, I thought that something was wrong with my wireless security settings, because I read about some incompatibilities between Windows 7 and AES encryption. However, when I changed to TKIP, the issue persisted; when I switched from WPA2 Personal to WEP, the issue persisted; and when I disabled wireless security entirely — just for testing purposes — the issue still persisted.
My Internet search for this issue brought up a lot of old forum and mailing list posts, most of which were useless. The only one that seemed promising suggested disabling Afterburner, but that came disabled by default on my install. I did try enabling it and then disabling it, but it had no apparent effect.
In case it's relevant: before I installed Tomato, I had a somewhat funky install of dd-wrt on the router. The first thing I did after installing Tomato was a full clean of the nvram through the web GUI's Administration → Configuration → Restore Default Configuration menu.
What do I have to do to get wireless running? I only have one computer available at the moment, but I'll try to update later if and when I can borrow more devices for testing.
Assorted specs:
Linksys WRT160N v3
Tomato Firmware v1.28.9054 MIPSR2-beta K26 Mini
Linux kernel 2.6.22.19 and Broadcom Wireless Driver 5.10.147.0 updates
EDIT:This is a computer issue, not a router issue. Two smartphones with wi-fi connections and another computer are all able to connect to the wireless network with no problems. However, the original computer was able to connect to the same router just fine before Tomato was installed. It has an internal wireless-B/G card, and I had Tomato set up to broadcast G-only, so it should have been compatible.
EDIT 2:The computer in question was the only device in the house that wasn't set up for wireless-N, so I went out and bought a Wireless-N USB adapter and changed Tomato to be N-only. Using the new adapter, I get connection again. I suppose it's possible that the computer's OEM internal wireless card failed at exactly the same time that I installed Tomato on the router, but that would be one heck of a coincidence. I'll see if I can connect to some other G or B network next time I'm around one....
I have a home network that uses a DLINK DIR-655 router. All of my devices ( a mix of wireless and wired) except one--a windows xp SP 3 desktop that stopped working yesterday. Some viruses, and adware were detected and it has not worked since then. What I have done.
View 11 Replies View RelatedCan't get my computer to recognize my wireless Dlink DIR615 Router. It accepts the password and connects to the router but not the internet
View 2 Replies View RelatedI'm trying to hook up a D Link 150 601 router to my time warner w/road runner computer but it won;t on DHCP I'm lost as what to do.
View 1 Replies View RelatedI have two computers linked to our d link wireless computer, i am trying to connectmy childs computer but it dosnt even come up as a available connectionThe wireless button is on, why it dosnt come upas an available connection
View 1 Replies View RelatedI have two PC laptops. One operates Windows Vista, the other has XP. I recently just had to do a hard reset on my linksys wpn824v3 router and made a new network name and password. I also changed the password for the router (suspect I may have a virus). My girlfriends computer (vista) sees the new network name and connects fine, my XP computer doesn't even see the new network, but it sees my neighbors networks.. and the laptops are sitting right next to each other.
View 1 Replies View Relatedsome computers is connecting to AP that is farthest, But there are two APS closer and the signal gets too low, the computer only connects to the closest AP if I disconnect and reconnect.I have 2 controllers series 2500 model AIR-CT2504-K9.
View 5 Replies View RelatedMy HP laptop connects to our wnr0003(or whatever it is) router but it says local only. When we took it to best buy, it connected there to the Internet oddly. And even odder, last year we had THE SAME router and it DID in fact, connect to the Internet, using the same router and all. So my question is, how do I fix this?
View 8 Replies View RelatedI have 3 computers running Windows and 1 running XP Pro.ISP is Charter. All these were connecting fine until Tuesday night storm came through. Power was out for a while due to a power pole being knocked down. Cable was on this same pole I think. Next day none of my computers could connect wireless.Used Ethernet cable direct to modem and finally got connection. To make a long story shorter, I find that now I can only connect unsecured or WEP. Can't connect using WPA2 at all.I wonder if it is possible that the ISP has blocked something to limit the speed?
WEP is only 54 MHZ
WPA2 is upto 300MHZ
Tried 2 different Netgear routers with same results Currently configured for WEP shared
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E6600 @ 3.06GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 8190 Mb
Graphics Card: Mirage Driver, 2 Mb
Hard Drives: C: Total - 476837 MB, Free - 428341 MB;
Motherboard: Gigabyte Technology Co., Ltd., G41MT-S2PT
Antivirus: Norton 360, Updated and Enabled
I'm working with a friend out with his computer, and he can't connect to the internet, but i can.But he uses a different computer system than me and turning on the wireless networking.
View 1 Replies View Relatedmy computer only connects to the internet in safe mode
View 3 Replies View RelatedI am having a weird problem with one of my network PC's. I admin a small network which I inherited at work but am a novice when its comes to networking hardware.One of the PC's suddenly stopped connecting to the internet on Fri night, as the cables have all been run through the roof I went through every cable on the D-Link 10/100 ethernet switch and could not get it to connect. Connection wizard showed it was sending packets whenever I tried to ping but recieved 0.
View 14 Replies View Relatedwhere with my computer where it will connect to my network for a second or two then immediately disconnect. Other computer and devices connect without a problem. I have also experienced this with every network I have tried to connect to; it does the same thing. I figure it is therefore a problem with my laptop itself, but trouble shooting has yielded nothing and most of the fixes I have found require connecting to the network, but obviously I cannot do that.I can connect with an Ethernet cable just fine. My guess would be that there is a setting that is incorrect within the wireless on my computer, but what that is I could not even venture to guess.
View 2 Replies View Related