Static IP Address No Longer Connects
Feb 7, 2011
A business network has had a Static IP Address for several years. Recently, something caused the settings to be changed to "Obtain an IP Address Automatically". As a result, pcAnywhere will no longer connect, and this is a critical function of the office. This has to get fixed. I've attempted to put the settings back to what they were (The IP Address, Subnet Mask, Default Gateway, etc...) but now the Server will no longer connect to the internet when you setup the Static IP. The settings I am using are exactly the same as the ones from over 2 years ago. Now they no longer work, and networking is confusing to me.
View 4 Replies
ADVERTISEMENT
Oct 12, 2011
I have recently bought a new computer and have been happily connected to my wireless network for three months. The other day the connection was lost and now I cannot connect to my wireless or parents wireless networks. I can connect via the ethernet only. I will attatch an ipconfig for you to have a look at when I am not connected can see my wireless network connections however when I tempt to connect it says windows cannot manage it. I am running windows 7 home premium 64 bit[CODE]
View 2 Replies
View Related
Oct 26, 2012
A couple weeks ago my HP laptop stopped working. It would not boot and I had to put in the recovery discs to get it working again. Before this the laptop had connected fine to my home wifi secured with WPA2-PSK[AES]. After this problem tho it refuses to connect while it is secured. When not secure it functions fine and I am currently using it to type this post. I would have no problem continuing to use the wifi unsecured but another member of my household works with confidential medical information from home and is worried about the lack of security. I have attempted the trouble shooting tips on the support website already. My computer model is HP G60-235DX and the router is a Netgear N300 model WNR2000v3[CODE]
View 4 Replies
View Related
Feb 6, 2012
I have wireless internet at home through a Belkin router.It used to work fine but one computer wouldnt connect. I tried checking the security password on my laptop and ever since it won't connect. (However, now the other computer does!) It picks up the signal from the router but just won't connect. When I run ipconfig I get a message saying Media Disconnected. I've searched forums and can't find an answer to this.The laptop still connects to the wireless internet in my office so the wireless capability obviously still works.
View 3 Replies
View Related
May 16, 2012
I woke up and my computer just refused to connect to internet. My roomates computer connects fine to the same modem (we use adsl). I tried switching cables and ports. The night before, my computer had an unexpected shutdown...
View 1 Replies
View Related
Jan 11, 2012
My Compaq tc1100 tablet worked perfectly, wirelessly, with our Billion BiPAC 7300NX/N ADSL2+ router, but then it just stopped doing this for no reason that I can think of. In our house is a desktop in each of the 3 bedrooms (one being mine, together with the tablet) that connect perfectly wirelessly to this same router. When I refresh the network list, then one moment it will show my network, and then seconds later when I refresh again, it will give "no networks were found in range".Switching off the router's WLAN security made no difference. Formatting and reloading XP, and installing the tablet's Wireless LAN drivers, made no difference. Moving the tablet around the house made no difference. Now, today I took my tablet with me to spend the day with my wife at her workplace, where there is a Billion wireless router as well (other model). I did not bother to first try to connect with my tablet's wireless card, but instead lent a spare D-Link DWA-125 wireless USB adapter, and connected perfectly. Later in the afternoon, out of curiosity, I started up Xirrus Wi-Fi Inspector, and took a snapshot of it, which is attached here. The whole time I was connected like this, there were, in the bottom right-hand corner, two of those wireless network connection icons, one with a red cross through it.
when removing the D-Link USB adapter --- it was time to come home --- the icon with the red cross disappeared once it was pulled out; I opened IE to see what's happening, and my home page opened successfully. So, was I surfing quite fine with my tablet's own card all day?! I then shut down, switched back on (still with the D-Link removed), opened IE, and my home page appeared again successfully. I did not do any other surfing, I must admit, but just shut down again and came home, where I'm back to square-one with a continual "red-crossed icon".........Using Xirrus here on the home network, and with its "locate adapter" pinger noise thingy enabled, it will alternate between pinging for a while and then keeping quiet --- I can supply the Xirrus 500 sec history snapshot of this, if needed.Yesterday, doing a hard reset of the router *momentarily* gave me "aquiring network address", and then connection, but this soon went away again.The tablet did not have this problem with our previous Netgear router. Nothing's changed in the house: the router and my tablet have always stood where they are. There's no new cordless phones, neither. The one that we have, has always stood centimeters away from the router.
Tablet's ipconfig /all:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAdministrator>IPCONFIG /ALL
[code]....
View 9 Replies
View Related
Jul 10, 2011
My Dell Dimension is no longer connecting to the internet via the wireless router. I have a dlink DI-524 and a dlink wireless USB key but it no longer connects. This just started today. When I try to repair the connection, it fails on "renewing IP".
OS is Windows XP.
P.S. I have tried power cycling the modem/router but nothing works. Other computers can get on the internet via the wireless router fine.
View 3 Replies
View Related
Nov 18, 2012
About 2 weeks ago, my wireless adapter and ethernet port stopped working all of a sudden. When trying to diagnose, I got the Dagnostic Policy error 5. On the basis of other postings on this subject, I have tried restoring an earlier restore point, uninstalling/reinstalling the network adaptors, have tried to run net localgroup Administrators /add networkservice & /add localservice, have tried adding permissions for mpssvc in regedit (DSP parameters). For the hardwired ethernet adapter, it worked but for my wireless adapter all failed so far. Output from sc queryex DPS > 0 is as follows:
SERVICE_NAME: DPS
TYPE : 20 WIN32_SHARE_PROCESS
STATE : 1 STOPPED
WIN32_EXIT_CODE : 5 (0x5)
SERVICE_EXIT_CODE : 0 (0x0)
CHECKPOINT : 0x0
WAIT_HINT : 0x0
PID : 0
FLAGS :
View 1 Replies
View Related
Aug 25, 2012
One of my laptops (Acer Aspire 5741) won't connect to the internet, it stopped connecting last night at around 9pm UK time. It shows an ! in a triangle over my Internet Access bars. When I troubleshoot the message is 'Your broadband modem is experiencing connectivity issues'. My Compaq mini netbook is not experiencing any problems though. I have tried resetting the router, removing and readding the home network and checking the security key is correct -I do also have a VPN from my university which has been installed since April without any problems. Both the laptop and notebook use windows 7 and Firefox.
View 3 Replies
View Related
Jul 17, 2006
My lap top and other desktop are able to detect the internet but not my main computer with this router.
View 2 Replies
View Related
Jun 10, 2012
When starting my laptop it no longer connects to the preferred network. It has been trying to connect to my neighbors unsecured network. I have tried the netsh settings but it searches for another network and will not connect to the one it is supposed to unless I force it to.
E4200 connects to wrong network.
View 9 Replies
View Related
May 26, 2012
I am trying to give an static ip address to a time clock on my network and for some reason when I connect time clock to network it will always get an ip address from a different network. for example my computer IP address is 192.168.2.70 when connected to network, my default gateway is 192.168.2.1, the IP address that the time clock always gets is 192.168.1.120, there is no way to tell the time clock what IP address I wanted to be it has to get it from router (that is what the manufacturer told me), router (16portLiksys) does not have DHCP enabled the guy who set up network left it disabled, on his notes he says server (dell server T110) is acting as router is that true that a server can be acting as router?what do guys think is going on here?all the computers hooked up to network have static IP address.I also notice that when I connect a computer to router it will get an IP address from different network the same as time clock.I tried to reserve ip address on router by entering MAC address from time clock but it won't work. I am not very familiar with the server settings I have not try changing settings on server, I am not even sure the guy who set up network is right about using server as router.
View 1 Replies
View Related
Mar 15, 2013
I have two different locations, two different ISP�s .
Cable �Modem--------Linksys Router WRT54G
DSL-Modem----------Linksys Router WRT54GS
One computer (Windows 7 Laptop) which travels between both locations.Can I or how do I setup a static IP address for both locations on my computer and not have to change settings when I change locations?
View 1 Replies
View Related
Jul 11, 2011
I am connected to a static ip network. This network sets local ips to connected computers but general ip is the same: static ip of network. When i go to "whatismyipaddress", I can see this static ip. I want to change my ip address. I have no chance to use proxy server or router connection. Is there a way to change my ip address? (Because some sites ban ip address, ex:rapidshare etc. and I need to change my ip)
View 1 Replies
View Related
Jan 7, 2013
HP wifi printers (I've had 2 over the last several years)eventually have a disconnect with my wifi router and was told (by an experienced IT guy from my last job) I should assign the printer a static address to eliminate the problem. How can I assign a static address to my printer. Here are the models Router: Belkin model F5D9231-4v1(01); Printer HP Officejet 6600. I know how to access the printer and manually enter an IP address and subnet and such, I just don't know which numbers to use where. I also know how to access my router, via typing in the IP address in Internet Explorer, but i'm unsure of which tab within the router's page (i.e. is it category wirelessunder MAC address control) or which numbers (IP address or MAC Address)and where should I get the correct numbers from (i.e. go run, cmd,IPconfig/all).
View 6 Replies
View Related
Feb 24, 2011
Everytime I start one of my two Windows machines, I need to go to the control panel network adapter and enter the static IP address in the IPV4 properties. It is always blank after a shutdown.I have two machines that are networked for flight simming.One of the machines must have a static IP so I configured both static. Not sure if this has anything to do with my problem.
View 5 Replies
View Related
Jun 10, 2012
I've had the same IP address for years and want to change it to a new one - I have a dynamic IP but for some reason it will never change.It looks as if it's always static-what settings I need to change on Windows 7 to get it to roll over onto a new IP address?
View 1 Replies
View Related
Jan 24, 2012
how to connect a different ip addressing single system in different place. but we cann't change the ip address in manually
View 1 Replies
View Related
May 13, 2013
Right now I have a lab setup with a couple of these AP's.They are both doing DHCP to get their IP address from a 5508.How do I set a static IP address on the AP?
View 5 Replies
View Related
Nov 16, 2011
ok the connection is a dial up it doesn't give any static ip address when i connect it now it will give me different ip , when i disconnect it again it will give me another ip. an the message appear at the server and the affect the client.....the client are using satic ip address.
View 1 Replies
View Related
Jan 29, 2012
how to open a site by using static ip address
View 2 Replies
View Related
Apr 20, 2011
I have what I feel is sort of a strange issue. When I have systems on my home network get their IP from DHCP, they can get to the internet just fine. But it seems that when I assign a static address, they have local network access only, and will not get a connection to the internet. My windows 2008 server is the big problem with this one.
View 10 Replies
View Related
Aug 3, 2012
When I was hosting a server on minecraft, a few people complained that the server was down. It was, and the problem is that my router switched to a dynamic IP after comcast installed a security system to my house. If I try to reset the router, the system goes down and takes a helluva long time to get back up. Whenever I try to switch to a static IP, however, I lose internet connection. Wondering how to fix this. Or do I have to switch back to my laptop - which might also not even work. (I'll go try that, but I'm using my desktop because it has extra RAM.)
View 19 Replies
View Related
Mar 23, 2012
Do not have internet connectivity, despite all the lights lit on calbe modem and the ASUS WL520GU router and only the internet and ethernet lights are lit on the Linksys 2102.Despite numerous reboots, no change and even bypassing the router and connecting directly to ATA still no conectivity.When I open a browser, it reverts to the Asus error page, "reason for failed connection: You have set the wrong dynamic or static IP address, though nothing was changed.Funny thing again, a direct internet connection to the ATA did nothing.A google search only just shows lots of unasnered posts on this issue, or only the usual 'please reboot'.
View 9 Replies
View Related
Jun 29, 2012
do internet cafes use static ip or dynamic ip address. Also what would be the benefit if they used a static ip address.
View 1 Replies
View Related
Feb 7, 2012
configure my cisco 892 router want a static ip address assigned to the interface because and I have no more internet on the router because am working on my network academy for CCENT?
View 28 Replies
View Related
Apr 10, 2011
I am trying to configure ASA to assign same static ip address to certain user(User1) every time when he connect to network via AnyConnect client. We have Windows AD and use LDAP AAA server for authentication of VPN Remote Access users. I found in document "Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2" in section "Configuring an External Server for Security Appliance User Authorization" explanation and configured ASA and User Properties in AD on exectly same way:First, I assigned static ip address in properties menu(dial in section) of User1 in Active Directory. Then I created ldap attribute map where I mapped msRADIUSFrameIPAddressattribute to IETF-Radius-Framed-IP-Address attribute. At the end I applied this ldap attribute map to AAA server group LDAP.
Although I set this up, whenever I connect using User1 credentials from AD I still get ip address from vpn pool instead static ip address that I configured. In output of debug ldap 255 command I found line "msRADIUSFramedIPAddress: value = -1062718956" but not any line that prove mapping above mentioned attributes.It seems like mapping is not working.All AnyConnect users get parameters from defined internal group policy on ASA,including addresses form pool,dns server etc. I want that User1 get static ip address and inherit all other parameters from group policy.
View 4 Replies
View Related
Apr 22, 2013
My second problem with sg200-08 (firmware: SG200-08x_FW_1.0.6.2.stk) is when I try to add specific MAC address as secure:MAC Address Tables - Static Addresses - Add; insert vlan id, port, mac address and select "Secure":I get error message: "Error: Failed to Add 'Static Address' entry.
View 3 Replies
View Related
Mar 24, 2011
In my router I can set rule that all traffic incoming to router's extAddr:8888, is forwarded to my intAddr:8888. But I also need reverse rule that packets originating from intAddr:8888 are translated to extAddr:8888. Can I do that? What technique can I search on google to find more information, because it is not port forwarding. I would calll it reverse port forwarding or static port address translation, but I do not find anything useful in internet searching these keywords.
View 3 Replies
View Related
Apr 19, 2013
using ipconfig to show static ip address when cable is unplugged, can ipconfig show static ip address when cable is unplugged? if no why? and if yes how do you make it work? anything you can edit on registry to mke it work.
View 2 Replies
View Related
Jul 1, 2012
I have 3 Dcs-3420's on the same network same static ip setup and they never have issues. Im testing 1 942L, I've upgraded firmware to1.11, but periodically the camera loses its ip address which is weird because it is set static. My wireless is set to Mac address security. Now camera is outside in a shaded area, over night the camera worked all night, this morning it has reset three times. Additionally, each time it resets/losses ip address it also loses the manually set time.
View 1 Replies
View Related
May 28, 2012
We have a Cisco ASA 5520 and in order to conserve public IP addresses and configuration (possibly) can we use the same public IP address for a static NAT with two different interfaces? Here is an example of what I'm refering too where 10.10.10.10 would be the same public IP address.
-static (inside,Outside) 10.10.10.10 access-list inside_nat_static_1
-static (production,Outside) 10.10.10.10 access-list production_nat_static_1
View 2 Replies
View Related
Feb 8, 2011
I've got a network of several AIR-LAP-1242G LWAPP access points controlled by a 2112 WLC. I assign static IP addresses to each LWAPP, but every few weeks, a couple of them (at random) revert back to grabbing a DHCP-assigned dynamic address for themselves, despite the fact that they're supposedly solidy configured to have static IPs. What's going on here? Is this a bug in their firmware or the WLC's firmware? If I reboot the APs, then they come up with their static IPs, but after running some random number of days/weeks, will spontaneously change their own management IP addresses and grab a DHCP address for themselves.
The 1242G APs version numbers reported by the WLC's web GUI are:
"Software version" 5.2.193.0
"Boot version" 12.4.13.0
"IOS version" 12.4(18a)JA2
"Mini IOS version" 3.0.51.0
The 2112 WLC is running software version 5.2.193.0
View 2 Replies
View Related
