Ipconfig To Show Static Ip Address When Cable Is Unplugged?

Apr 19, 2013

using ipconfig to show static ip address when cable is unplugged, can ipconfig show static ip address when cable is unplugged? if no why? and if yes how do you make it work? anything you can edit on registry to mke it work.

View 2 Replies


ADVERTISEMENT

Linksys Cable / DSL :: Assigning Static IP Address In WAG160nv2 To XBox 3

Apr 3, 2011

Is there anyway you can assign a static IP address within WAG160Nv2 to peripherals such as an XBOX?
 
The knowledge base only seems to show how to assign an IP address in the XBOX but when I have to reboot the router, I've noticed the XBOX is assigned a new IP address when viewed in the router pages.
 
If I set a permanent IP address in the XBOX, this will no longer match what is in the router.

View 1 Replies View Related

Network Cable Unplugged Xp?

Sep 10, 2011

i have installed linksys pci adapter with speed wmp54gs. i try and turn it on and it will not show any devices and it will not let me click on rescan the the only thing that highlights is exit when you open!

View 3 Replies View Related

Network Cable Unplugged Even Though It's Connected

Sep 13, 2012

I am running an ethernet cord from my xbox 360 to my Acer Aspire TimelineX 3820TG-3022 Laptop Computer. I am attempting to run ICS in order to share the connection to my xbox. The problem comes when I attempt to plug in my ethernet cord to the computer, and nothing happens.

Here is a screenshot of what the port says / my network adapter setup: 33a7c93a4c607756f9219a95a7207a7d.png It's a Atheros AR8151 PCI-E Gigabit Ethernet

I have tried sharing the connection to my xbox via another laptop, and it has worked. Power saving mode is disabled in the port in the device manager, and I have no clue what is going on.

View 2 Replies View Related

Cards :: Ethernet Cable Says Unplugged While It Is Still In

Jan 19, 2013

I have no Internet connection, and when I diagnose it, it will say, " plug an Ethernet cable in" when there is already one in. So I will attempt to restart it, and it will freeze when it says "Starting Windows" and it will do so every time. Until I pull the power cord from the back and plug it in again. Then it will log in fine, and the same problem will occur. I ran virus scans and nothing was infected. I had just recently got it rebooted also, twice in fact since this problem keeps reoccurring. (This computer has never blue screened or crashed) Every other device plugged into the router is working fine (Gaming consoles Xbox, and PS3). My friends laptop internet was fine also when we plugged it in using the Ethernet cable when he stayed at my place for days, also no problems with the wireless devices using the router.

View 9 Replies View Related

Built-in Wireless Adapter Cable Unplugged

May 15, 2011

Last night, my internet was working perfectly and I closed my computer lid before going to sleep as usual. This morning, I wake up to use my computer and the internet isn't working. I check the icon at the top and instead of showing an empty wireless meter with an X over it, it shows a computer and a cable with an X over it, which isn't normal. My laptop is an Acer Aspire 5532 with a built in wireless adapter and it has a button near the power button that turns the adapter on and off. I decided to turn it off, give it a while, and turn it on, but that didn't fix it, so I restarted the computer.

Now, when I try to turn it on an off, it gives the wireless symbol with a circled X over it. I have checked the device in Device Manager to see if it is working and it says it is working properly. So I uninstalled it, restarted and the computer automatically installed software like it should, but that didn't fix it. I tried a System Restore, but that didn't work as well. Another thing I should mention is that I have tried rolling back the driver (which didn't fix anything), then I updated it, which also didn't fix anything.

Is there anything else I should try? The only thing Diagnostics can detect is an unplugged cable, but it's built in, so it doesn't require a cable (I've had it for >1 year and this is the first problem I've had).I downloaded Xirrus Wi-Fi Inspector and it says no wireless adapters can be found.

View 1 Replies View Related

Network Cable Unplugged But It Works With Different Machine

Oct 10, 2012

I plug the Lenovo in to the Ethernet cable in my office, get link & data transfer lights, connect to the internet,everything works.Bring it out to different office (it's replacing an old XP machine, which connects on the cable I'm about to mention)Plug it in to ethernet, no lights, Network Cable is Unplugged.Plug cable back into old XP machine. It connects.

Bring out a Win7 Home Premium SP1 laptop. It connects.Plug back into Idea center, nothing. Drag idea centre back into my office. It works again.The Idea centre is new, so it's never worked on this area before. Also, I have 3, and they're behaving identically. ALSO, sometimes when I plug in the Ethernet cable the green and yellow indicator lights will blink once at me, and then never again.

The cable's good, works with 2 other machines. The port/NIC card is good, works in my office, the only difference between the two locations is that I have an extra router in my office that I don't have in the office the Lenovo is going in, so it MUST be something in the settings, but I can't tell what's different between the machines that work and the Lenovo.

View 5 Replies View Related

Windows 7 Error Network Cable Unplugged

Apr 11, 2011

Windows 7 Home Premium Service Pack 1 RealtekPCIe GBE Family Controller With no apparent change in software or configuration, I am getting the 'Network cable unplugged' error. The cable connects another PC just fine so both the cable and router are OK.

View 4 Replies View Related

Enabling Identifying Network Cable Unplugged?

Nov 22, 2011

So here's a fresh spin (and not in a good way) on the seemingly common port-flapping issue, where a windows vista/7 machine's ethernet port vacillates between "enabling, identifying,network cable unplugged." I've tried the fixes I've seen around, like forcing the speed to 10 or 100Mb duplex,etc. But I think the problem goes deeper than that -or drivers or faulty NICs. Its acting like it's in the cabling. . . but not. Any advice would be welcome.Just switched from one DSL provider (Bell) to another (Teksavvy). Connected via a dry loop. When the Bell tech first set it up a year ago, he did it like this: Patch cord frome the Bell 2Wire modem/router combo to a female coupler. Female coupler attached to cat5 cable running about 25/30 feet along baseboards around the corner to another female coupler. Patch cord from female coupler to NIC in the back of my box. This worked fine. New set up with Tek savvy is as follows: DSL modem via patch cord to (wireless) D-Link router. D-link router connected to computer by same aforementioned setup. This results in the port-flapping named in the title of this message, on the hard line only. Any change in my computer was ruled out by connecting a brand new, never been connected laptop and the same terminal as my computer. Results in port flapping. The same laptop connected to the router by just the patch cord results in a perfect connection. I've tried moving the patch cords around, it doesn't change the results, so they're fine. I have no way of testing this long stretch of installed cable in the middle, with the couplers on it, since I don't have an equal length cable to try out anywhere, but I'd be surprised if that just died after a year's use exactly when I connected new hardware to the other end of it. Running windows 7 with a RealTek NIC on my box. D-Link router (will check the model later, at work at the moment), and TP-Link DSL modem. The system delivers wireless internet flawlessly.

View 2 Replies View Related

Routers / Switches :: Network Cable Unplugged Message?

May 22, 2011

Same problem ' network cable unplugged' even if it is physically connected. I have sony vaio pczim series with win 2000 xp home edition with a broadband (cpe adsl2+ type) connection. While everything working fine for past two years, suddenly after a thunderstorm night, I noticed the network connection failure with the message. I checked the router, cable and the same are working fine with other hp laptop. Even the vaio is running with the same router while usb port is used and even the wireless and bluetooth are fine, but network with ethernet cable connection does not.

View 1 Replies View Related

Local Area Connection Says There Is A Network Cable Unplugged

Jun 29, 2011

Local area connection says there is a network cable unplugged. There are non unpluged. should I just leave it be? My computer is working fine

View 1 Replies View Related

Routers / Switches :: Computer Say Network Cable Unplugged?

Jun 14, 2011

my modem is working, I have two computers on the router plus my wireless is working.I connected my cable that was going from the modem to the router directly to the computer and it still says "network cable unplugged"sis 900 based PCI fast internet?

View 3 Replies View Related

Error Saying Network Cable Unplugged When Try To Connect Laptop To Pc

May 31, 2011

I want to connect my laptop and desktop. I have a LAN/Ethernet cable. When I joined the two, it says "Network cable is unplugged" on both the PC's. I have replaced my cable. The cable works good when I am using internet.

View 3 Replies View Related

LAN / Network Cable Unplugged - Internet Not Working After Virus

Aug 26, 2011

After running my malware anti-virus and removing all the virus, my Local Area Connection keeps saying network cable unplugged. I checked the network adapters and everything is fine. When I did an ipconfig, there's no ip address showing. I have Windows XP. I've tried almost everything and it's still not working.

View 1 Replies View Related

Local Area Connection / Network Cable Unplugged

Oct 31, 2011

Local Area Connection - Network Cable Unplugged I am using Professional 2000 and have a Linksys WRT54G Version 8.2 Wireless Router...have broadband connection through Brighthouse. My laptop works fine but my desk top computer keeps giving me this message.I have checked all the connections and even bought a new network cable to see if it was a hardware issue.

View 1 Replies View Related

Cabling / Cards :: Ethernet Cable Unplugged Message But It's Not

Apr 12, 2011

Can't log on to computer running win xp sp3. I'm getting message that ethernet cable is unplugged but it's not unplugged. The modem/router was installed by Verizon (for FIOS connection) in February 2011. Internet was working fine until a couple of days ago. I have looked at other posts on this issue but have found nothing that would solve the problem. My old dial-up modem was still installed in the computer and had a question mark on it in device manager so I removed it. I thought maybe there was an IRQ conflict as the modem used to use IRQ 11 and the network card (linksys) uses that sometimes as well as IRQ 10 but that didn't work.

View 19 Replies View Related

Dell :: Inspiron 17R SE 7720 - Network Cable Unplugged - But It's Not

Apr 14, 2013

I have an Inspiron 17R SE 7720 that is about a half-year old.  This problem has been occurring for as long as I can recall.  I'm running Windows 8, but this problem was identical with Windows 7.

My Ethernet adapter, a Realtek 10/100, works on boot-up.  At some random point it stops working.  It could be days later, it could be after waking up, it could be within an hour of a boot without sleep.  "Network Connections" shows the adapter as enabled but unplugged.  I can correct the problem by disabling the adapter and then re-enabling it, but that only works maybe a couple of times in a row.  In the latest instance (moments ago), I right-clicked the adapter to disable it, and then right-clicked  to enable it again.  Normally the adapter would then show the adapter as enabled and the cable connected.  When things really go wrong, a window pops up that first says "Enabling..." and then "Enabled", but it is still grayed out and not enabled.  The only solution I have is to reboot the machine.

View 3 Replies View Related

WRT600N Network Adapter Shows Cable Unplugged

Feb 6, 2011

I have a Lynksys WRT600N. I had DD-WRT on it and it was working great for about a year. One day I changed some minor settings like wireless signal type, reboot it and it's gone. I can not access it from my computer. The network adapter shows "cable unplugged". The lights on the front come on, but I can't get anywhere with it.

I've done all the resets I know how to do, including the 30/30/30 and leaving it unplugged for a few months.

View 4 Replies View Related

Cisco WAN :: RJ45 - Interface Still Marked As Up Even Cable Unplugged

Dec 29, 2010

my senario is:
 
f0/1(dialer 0)<----RJ 45----->ADSL Modem<------>ISP
 
but even I unpluged the RJ 45 cable, the dial 0 still marked as up (interface and protocol), the f0/1 was marked as line up and protocol down.

View 2 Replies View Related

Connect Secure Mobility Client - Network Cable Unplugged

Sep 9, 2012

I'm running Cicso AnyConnect Secure Mobility Client v3.0.07059 for work. Attached is a sceenshot of my network connections. I'm currently hardwired on my network connection and the Cisco VPN is a virtual adapter but is shows "network cable unplugged."

View 12 Replies View Related

Wireless Internet Not Connecting On XP Desktop Network Cable Unplugged

Aug 18, 2012

I have a dell desktop that uses Windows XP. Today I was cleaning out some unwanted programs that I never use and just take up space. But I don't know if I deleted something that I shouldn't have, or what happened but I am now unable to use my wireless internet. It says that a "network cable is unplugged". I have checked my modem and it is working fine. My brother is receiving internet in is laptop.

View 3 Replies View Related

Ethernet Cable Unplugged Or Broken - Unable To Connect Internet?

Nov 30, 2011

I cant get a connection to the internet when i open up lan theres a red x when i diagnose lan it says to plug in ethernet cable ive done that but then it says it may be unplugged or broken i even changed the ethernet cable but same problem, so i figured its the driver but that says upto date however when i reinstall it says theres no network adapter installed, i havent installed anything recently and to besure it wasnt because of an microsoft update i even did a system restore

View 12 Replies View Related

Dell :: Inspiron 1545 Ethernet Network Cable Unplugged

Mar 7, 2013

I just had recently replaced my Power Jack which had the ethernet port with it. Ever since I replaced it my Local Network Connection would give me an error (Network Cable Unplugged).

View 1 Replies View Related

Dell :: Latitude E6500 - Ethernet Adapter / Cable Unplugged

Oct 6, 2009

I have a laptop DELL Latitude E6500. I cannot connect it to LAN through Intel (R) 82567 LM Gigabit Network adapter. Connection is set up by DHCP. I get error message: "cable is unplugged", but cable is functional. How I can resolve this problem?

View 1 Replies View Related

Sony Vaio Laptop Causing Network Cable Unplugged On Desktop PC

Jan 2, 2012

I realise many people are having this issue and there any lots of threads about it all, which i have spent hours looking through forums for answers but I am not that computer savy to understand it all...Haven't really come accross the same scenerio as i am having, so here it is: Just brought a Sony Vaio Laptop running Win 7 home Premium. Have a desktop computer running xp which is connected to modem and router...Am running a D-link DSL-502T and Linksys wireless-G broadband Router, model :WRT54G.My issue is i can connect to the wireless network through the laptop but when i switch the wireless switch on the laptop every few minutes the desktop PC will drop the connection and display network cable unplugged, then goes back and fourth connecting and disconnecting every few minutes....as soon as i flick wireless switch off on laptop all is fine again.....wireless works as have another laptop running windows 7 pro and can connect mobile phone through wireless and ipad etc...I have had the internet load web pages but connection doesnt stay on...Does the same thing when i try connecting directly using network cable.

View 3 Replies View Related

6867R - Network Cable Is Unplugged When Plug ADSL Line To Router?

Nov 20, 2011

I can connect to my router but not to Internet, it seams that ADSL line "disconnects" my LAN/WLAN this issue is with Inalambrico 6867R router an other router, TP-Link is working great

View 1 Replies View Related

Linksys Wireless Router :: EA4500 Says That Internet Cable Is Unplugged During Installation

Aug 7, 2012

Got the cisco EA4500 router, installed it and ran the set up disc. It downloads whatever it needs to download, then proceeds with a progress bar all the way to 100. Then it tells me my internet cable is unplugged, but I able to browse the intrnet, like now. It tells me to plug it in and hit next, I hit next and it eventually gives me the same message. I've tried unplugging my modem, resetting the router etc. But when trying  to run the disc when it gets to that point it always tells me my internet is unplugged? I can even browse the internet while that message is up.

View 9 Replies View Related

Linksys Cable / DSL :: WAG160N Static DNS - Setting Up Static Dns 3 On WAG?

Jul 26, 2011

I've been having a problem with setting up static dns 3 on my WAG, what has been set is...
 
Static DNS 1:  208.67.222.222
Static DNS 2:  208.67.220.220
Static DNS 3:  208.67.220.222
 
Now if I look in my router status screen 1&2 are correctly displayed but the 3rd entry is showing my ISP's DNS,

View 9 Replies View Related

Cisco Firewall :: ASDM And CLI Show Different Static Routes For ASA 5505?

Feb 23, 2013

I was checking out the config on my ASA and noticed a bunch of static routes configured when I did a show route. With the exception of two that I expect to be there, the remainder point traffic destined for specific  internal hosts to the outside interface, i.e.
 
S    private_ip 255.255.255.255 [1/0] via public_ip, outside
 
I verified that I  cannot ping those hosts from the firewall. I logged in to the ASDM. When I check  the Configuration>Device Setup>Routing>Static Routes it only  shows two static routes, the ones I expect to see. If I look under Monitoring>Routing>Routes, I see the same output as I did on the CLI. I looked around to see if I was missing a key location for this information, and I was able to see the same static routes output in Monitoring>Routing>Routes. Since this is under monitoring though there's no way to delete these routes, and I still don't know where they were configured originally. Then I happened to check under Monitoring>VPN>VPN Statistics>Sessions, and I see several of the private IPs used in the static routes being used by VPN users, including my own! I know I didn't assign myself a static IP for VPN use or anything like that. So, what are these static IP routes? Why do I see them in the CLI and not under the Configuration tab? I mean, I know I can delete them from the CLI but I'm trying to figure out why the info is not synced. Am I seeing dynamically created content based on the VPN connections?

View 2 Replies View Related

Ipconfig Says Media Disconnected?

Dec 16, 2012

when i open up my network connections tab, i see two icons: "Wireless network Connection" and "Local Area Connection"

It clearly says a cable is unplugged, but no cable is unplugged and i am 100% sure of that.

when i type "ipconfig" into command prompt, i see all these things that say "tunnel adapter Local area connection" and it says media disconnected.

how would i go about "Connecting" the media? i am concerned about this issue so much because, even though i can connect to the internet (ip:192.168.1.1) i cannot connect to my printer (ip:192.168.1.4) and when i tracert the printers ip it says "media disconnected" so i know the two errors correlate to one another.

View 10 Replies View Related

How To Traceroute Show Two Different Names For Same IP 365 Address

May 22, 2013

Here are two traceroutes both to 82.195.128.132. One results in the name ns1.hosting 365.ie and the other in the name mail.hosting365.ie. Why the difference? [code]

View 2 Replies View Related

Ipconfig - Media Disconnected On Windows 7?

Nov 14, 2012

Wireless connection is slow. ipconfig display message media disconnected on window 7 machine.[CODE]

View 14 Replies View Related

Media Disconnected Message In Ipconfig?

May 8, 2012

I know there was an old thread with a similar problem, but that thread is closed and the answers didn't work for me. i am using an HP compaq 8710p, with windows xp. I moved to a new house so am using a new wireless for the first time. My laptop detects the wireless (and other wireless connections nearby) but will not connect. My iphone is connected to the wireless, and the wired connection to my laptop is fine. So the problem is my laptop.When I try to renew ip this is the message I get;

C:Documents and Settingsuser>ipconfig/release
Windows IP Configuration
No operation can be performed on Wireless Network Connection 4 while it has its
media disconnected.
Ethernet adapter Local Area Connection 3:

[code]....

View 10 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved