Static IP Address Causes Computer To Disconnect From Internet
Aug 3, 2012
When I was hosting a server on minecraft, a few people complained that the server was down. It was, and the problem is that my router switched to a dynamic IP after comcast installed a security system to my house. If I try to reset the router, the system goes down and takes a helluva long time to get back up. Whenever I try to switch to a static IP, however, I lose internet connection. Wondering how to fix this. Or do I have to switch back to my laptop - which might also not even work. (I'll go try that, but I'm using my desktop because it has extra RAM.)
View 19 Replies
ADVERTISEMENT
Jan 27, 2011
we have lady in office who does nothing but play games and facebook all day we wont to disconnect her from internet but computer is on networking
View 1 Replies
View Related
Mar 15, 2013
I have two different locations, two different ISP�s .
Cable �Modem--------Linksys Router WRT54G
DSL-Modem----------Linksys Router WRT54GS
One computer (Windows 7 Laptop) which travels between both locations.Can I or how do I setup a static IP address for both locations on my computer and not have to change settings when I change locations?
View 1 Replies
View Related
Apr 20, 2011
I have what I feel is sort of a strange issue. When I have systems on my home network get their IP from DHCP, they can get to the internet just fine. But it seems that when I assign a static address, they have local network access only, and will not get a connection to the internet. My windows 2008 server is the big problem with this one.
View 10 Replies
View Related
Jun 29, 2012
do internet cafes use static ip or dynamic ip address. Also what would be the benefit if they used a static ip address.
View 1 Replies
View Related
Apr 5, 2013
I am having a cisco 861 series router.The Cable from the isp was connected to fastethernet4(wan port)
Following are my isp details
IP address:172.16.62.130
subnet:255.255.0.0
default gate way:172.16.62.1
dns primary:202.153.32.2
secondary:202.153.32.3
How do i configure this details in the router and access the internet in my devices.
i want the network to be in 192.168.1.0 to 254.
how do i configure my router with this details using cisco configuration professional
View 1 Replies
View Related
Oct 29, 2011
When I start my torrent client (deluge) in short time computer disconnect from router. My I need to configure some settings on my wrt120n?
View 6 Replies
View Related
Jul 12, 2012
Myself and a friend used to play a game over the internet and join via ip address after a few years and upgrades to windows 7 we decided to do this again problem is we cannot seem to be able to connect via ip address using windows 7 does not even work after using port forward on my machine (host) and disabling firewalls on both machines.
View 3 Replies
View Related
Aug 23, 2009
I just bought a WRT120N and at different times it will randomly restart and disconnect all the computer on my network I have 4 wired devices and 4 Wireless devices.
View 9 Replies
View Related
Jun 24, 2011
If i need to know others IP address of internet connected computer, what would be the better and best steps to be done.
View 2 Replies
View Related
Jun 1, 2012
We have an ADSL connection and use a D-Link DSL-320B modem. We have a D-Link DIR-120 router connected to this modem. This has worked perfectly fine up until today when we disconnected the router and connected a computer (call it A) directly to the modem because it was getting an unusable connection through the router for some reason. We later also performed a factory reset on the DIR-120 router.
Unfortunately, after the above steps the router did not receive any IP address (through DHCP) from the ADSL connection anymore. During my attempts to debug this I noticed that my laptop (call it B) didn't get any IP address either (when connected directly to the modem). I noticed the following syslog entries repeating over and over while trying to connect: [code]
At this point computer A could still get a connection just fine tho (when connected directly to the modem).
I then tried to change the MAC address of the router to an arbitrary one (a copy of computer B's MAC address but with the last digit increased by one). The router still did not get assigned any IP address. Finally I tried making the router clone the MAC address of a third computer (call it C). C has never been connected directly to the modem. Doing this worked. After cloning the MAC address of computer C the router is immediately assigned an IP address and the internet connection works as it did prior to all this.
Now, my question is, why would computer B and the original MAC address of the router not be able to get an IP address while two other computers worked just fine? Why would changing to an arbitrary MAC address not work while cloning the MAC address of another computer did? Could the router's MAC address have been blocked by the ISP for some reason (and what could cause this)?
but my situation seems more like a blacklisting of some MAC addresses rather then allowing just a single MAC address.
View 1 Replies
View Related
Oct 16, 2011
I got new internet connection some days back (like 3-5 days ago), and since then, when I try download at night time when I'm sleeping, my internet disconnects me? I'm downloading with JDownloader by the way. I didn't get "new" internet, well.. I basically did, but yeah... This is how I got "new" internet.I used to have same ISP, but it was 24mb internet, and gave just 12mb to be honest, so I got 100mb instead. But since I got this 100mb internet connection, it disconnects me at night time, I don't know why. I've tryed to lock my PC as I download, I've tryed to keep completely on the whole PC, but still no. Always disconnected when I wake up.
Is there something I could do about it? When I had the old 24mb internet, it didn't disconnect me really... never. Just once in a while, like once in month or something but that ain't much. Is there something I could do?My download speed, it should give me 8-12mb/s (I'm not sure though), and I can't do speedtest.net thing right now because I'm downloading at daytime then instead of night time, because I can't download at night time... But yeah, my download keeps jumping from 500kb/s to 12MB/s (12 mb/s is more true than 500kb/s), shouldn't it give me the full speed all the time? Or keep it above 6mb/s anyways? Not like 500kb/s - 5mb/s that it usually is. There's just 1 LAPTOP (I'm using wires, PC you know) connected on this very same internet too, but it's wireless. It keeps jumping, either somebody uses the laptop or not, it doesn't matter
View 5 Replies
View Related
Oct 16, 2011
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 64 bit
Processor: Pentium(R) Dual-Core CPU E5300 @ 2.60GHz, Intel64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 4095 Mb
Graphics Card: NVIDIA GeForce GTS 250, 1024 Mb
Hard Drives: C: Total - 102299 MB, Free - 33923 MB; D: Total - 493065 MB, Free - 366503 MB; G: Total - 358399 MB, Free - 130817 MB;
Motherboard: MICRO-STAR INTERNATIONAL CO.,LTD, P43T-C51 (MS-7519), 1.0, To be filled by O.E.M.
Antivirus: Kaspersky Internet Security, Updated and Enabled
I got new internet connection some days back (like 3-5 days ago), and since then, when I try download at night time when I'm sleeping, my internet disconnects me? I'm downloading with JDownloader by the way. I didn't get "new" internet, well.. I basically did, but yeah... This is how I got "new" internet. I used to have same ISP, but it was 24mb internet, and gave just 12mb to be honest, so I got 100mb instead. But since I got this 100mb internet connection, it disconnects me at night time, I don't know why.I've tryed to lock my PC as I download, I've tryed to keep completely on the whole PC, but still no. Always disconnected when I wake up. When I had the old 24mb internet, it didn't disconnect me really... never. Just once in a while, like once in month or something but that ain't much.ALSO... My download speed, it should give me 8-12mb/s (I'm not sure though), and I can't do speedtest.net thing right now because I'm downloading at daytime then instead of night time, because I can't download at night time... But yeah, my download keeps jumping from 500kb/s to 12MB/s (12 mb/s is more true than 500kb/s), shouldn't it give me the full speed all the time? Or keep it above 6mb/s anyways? Not like 500kb/s - 5mb/s that it usually is. There's just 1 LAPTOP (I'm using wires, PC you know) connected on this very same internet too, but it's wireless. It keeps jumping, either somebody uses the laptop or not, it doesn't matter.
View 2 Replies
View Related
Feb 1, 2013
why does my internet disconnect every 10 minutes with a hard wire modem,an then start working for 12 to 24 hrs.
View 1 Replies
View Related
Apr 20, 2012
I am coming with a new question this time, I have a problem with my windows xp, I have installed the drivers, and everything works just fine, But, I have problems with my internet, It will disconnect SUDDENLY from internet, (whatever I am doing, music,drawing in pc and stuff) In my network list I can still see My modem, But When I will try to connect to it It will say "unable to connect to Pas-Home"
View 1 Replies
View Related
Aug 9, 2012
My desktop is connected to the internet through my home's wireless network and every time I log into an online game it disconnects me from the internet.This happens without signal loss or other warning signs from Windows, but my in-game ping spikes until I disconnect and I am unable to access the internet through my regular browser.I am still able to access the internet through other devices and am able to play the game through another computer which runs windows vista.All drivers and firmware are up to date.
View 1 Replies
View Related
Jan 8, 2011
My Internet will disconnect & then reconnect constantly. I have 2 laptops & they are both on my home network & I have no trouble with the other one so I assume there is nothing wrong with both the Internet service & router. The laptop with the problem is an acer/aspire 5720z. The Wireless Network Adapter is a Atheros AR5007EG. When I go to the Adapter Properties the status reads "The device is working properly". When I go to Control Panel>Network & Sharing Center my Wireless Network Connection Signal Strength reads Excellent. The operating system is Windows Vista Home Premium.
View 5 Replies
View Related
May 27, 2011
Recently I bought a new PC to replace an old laptop that I use in my bedroom. However, initially I couldn't pick up my downstairs router signal. So, I bought a new wireless network card and STILL didn't pick up any signal. I then purchased a Netgear WN200RPT and everything seemed to be ok while using that to repeat the signal up into my bedroom. Then, suddenly, it all stopped working. The WN200RPT would, although showing a full internet connection with no yellow ! or red x's, it would never ever load webpages. So, I removed it and put it back in its box. Then, for some unknown reason after a Windows 7 reinstall, my network card started picking up the signal from my home router and had a good speed and signal. This worked fine for a month or two before it started playing up again. It would randomly slow down and stop loading webpages, or completely lose the signal and show a red x, stating that no signals could be found. The strange thing is, all the other PCs in my house connect wirelessly fine, and so did the laptop that was in the same room as this PC. After a system restore, the internet started working again. Then it stopped. Another restore later, it works. Now it's intermittent again.
View 3 Replies
View Related
May 15, 2011
When doing anything on my PC, gaming, browsing, whatever, I will have random disconnects for a few seconds and it will reconnect. I don't get the "your network cable has been unplugged" message, it just stops working for a second or two and starts working again. This has been happening for a few months after a fresh install of windows xp and I haven't really tried to fix it.Every other computer in the house is fine except this one, it can't be the modem because a new one was installed a few days ago and its the same problem. The router was reset within the last week as well. I think the problem is with this computer alone but I don't know where to look. The problem didn't happen for a few days after I put a new network card in, but soon after it continued happening. I also have tried a few different CAT5 cables, even the XBOX one but nothing resolved the issue.
View 4 Replies
View Related
Nov 5, 2012
I have a sb 6120 modem and a wireless router that have been randomly dropping and resetting. I thought it was happening with increased bandwidth usage, but it doesn't appear to be linked to when I'm downloading or gaming. Just in case, I set up port forwarding for my games but no change. I have swapped out wireless routers and directly connected to my modem and it still happens. I have spoken with my ISP and they can't see that I have lost connection even while I am currently disconnected. My stats look good with my downstream power stable around 4 or 5 and up around 38. Also, I have pinged my modem and each computer connected wirelessly and show no packet loss.
View 1 Replies
View Related
Jan 17, 2011
I got a static ip from my isp. I set up my static ip manually through my linksy router. I need the static ip to connect to a private network for my new job but cant connect to that network. I went to whatsmyip and found that my old dynamic ip is still showing up externally, it looks like my ip4 is using the dynamic as a preferred. My question is do i need to manually change the network connection on my LAN and wireless connection under ipv4 to change it from automatically obtain TO use the following address and put in my static? And do I have to change the DNS also? I am on a home network with one desktop on vista home premium and laptop windows 7.
View 5 Replies
View Related
Sep 28, 2012
prevent someone from putting their computer on a network with a static ip that is already on the network so it does not cause a conflict. I'll try to do the short version of what happeend (ip numbers wont be accurate) has his laptop with him set to a static ip of 192.168.0.1 and connects it to our network and our file server which is also the dhcp and dns is set to that ip address. So when he connected it it basically brought down our whole network....
View 2 Replies
View Related
May 26, 2012
I am trying to give an static ip address to a time clock on my network and for some reason when I connect time clock to network it will always get an ip address from a different network. for example my computer IP address is 192.168.2.70 when connected to network, my default gateway is 192.168.2.1, the IP address that the time clock always gets is 192.168.1.120, there is no way to tell the time clock what IP address I wanted to be it has to get it from router (that is what the manufacturer told me), router (16portLiksys) does not have DHCP enabled the guy who set up network left it disabled, on his notes he says server (dell server T110) is acting as router is that true that a server can be acting as router?what do guys think is going on here?all the computers hooked up to network have static IP address.I also notice that when I connect a computer to router it will get an IP address from different network the same as time clock.I tried to reserve ip address on router by entering MAC address from time clock but it won't work. I am not very familiar with the server settings I have not try changing settings on server, I am not even sure the guy who set up network is right about using server as router.
View 1 Replies
View Related
Mar 13, 2013
Is there a software that can be used to disconnect internet connection on selected system on a lan
View 2 Replies
View Related
Jul 11, 2011
I am connected to a static ip network. This network sets local ips to connected computers but general ip is the same: static ip of network. When i go to "whatismyipaddress", I can see this static ip. I want to change my ip address. I have no chance to use proxy server or router connection. Is there a way to change my ip address? (Because some sites ban ip address, ex:rapidshare etc. and I need to change my ip)
View 1 Replies
View Related
Jan 7, 2013
HP wifi printers (I've had 2 over the last several years)eventually have a disconnect with my wifi router and was told (by an experienced IT guy from my last job) I should assign the printer a static address to eliminate the problem. How can I assign a static address to my printer. Here are the models Router: Belkin model F5D9231-4v1(01); Printer HP Officejet 6600. I know how to access the printer and manually enter an IP address and subnet and such, I just don't know which numbers to use where. I also know how to access my router, via typing in the IP address in Internet Explorer, but i'm unsure of which tab within the router's page (i.e. is it category wirelessunder MAC address control) or which numbers (IP address or MAC Address)and where should I get the correct numbers from (i.e. go run, cmd,IPconfig/all).
View 6 Replies
View Related
Feb 24, 2011
Everytime I start one of my two Windows machines, I need to go to the control panel network adapter and enter the static IP address in the IPV4 properties. It is always blank after a shutdown.I have two machines that are networked for flight simming.One of the machines must have a static IP so I configured both static. Not sure if this has anything to do with my problem.
View 5 Replies
View Related
Feb 7, 2011
A business network has had a Static IP Address for several years. Recently, something caused the settings to be changed to "Obtain an IP Address Automatically". As a result, pcAnywhere will no longer connect, and this is a critical function of the office. This has to get fixed. I've attempted to put the settings back to what they were (The IP Address, Subnet Mask, Default Gateway, etc...) but now the Server will no longer connect to the internet when you setup the Static IP. The settings I am using are exactly the same as the ones from over 2 years ago. Now they no longer work, and networking is confusing to me.
View 4 Replies
View Related
Jun 10, 2012
I've had the same IP address for years and want to change it to a new one - I have a dynamic IP but for some reason it will never change.It looks as if it's always static-what settings I need to change on Windows 7 to get it to roll over onto a new IP address?
View 1 Replies
View Related
Jan 24, 2012
how to connect a different ip addressing single system in different place. but we cann't change the ip address in manually
View 1 Replies
View Related
May 13, 2013
Right now I have a lab setup with a couple of these AP's.They are both doing DHCP to get their IP address from a 5508.How do I set a static IP address on the AP?
View 5 Replies
View Related
Nov 16, 2011
ok the connection is a dial up it doesn't give any static ip address when i connect it now it will give me different ip , when i disconnect it again it will give me another ip. an the message appear at the server and the affect the client.....the client are using satic ip address.
View 1 Replies
View Related
Jan 29, 2012
how to open a site by using static ip address
View 2 Replies
View Related
