Cisco WAN :: Configure 861 Router For Internet Using Static Ip Address?
Apr 5, 2013
I am having a cisco 861 series router.The Cable from the isp was connected to fastethernet4(wan port)
Following are my isp details
IP address:172.16.62.130
subnet:255.255.0.0
default gate way:172.16.62.1
dns primary:202.153.32.2
secondary:202.153.32.3
How do i configure this details in the router and access the internet in my devices.
i want the network to be in 192.168.1.0 to 254.
how do i configure my router with this details using cisco configuration professional
View 1 Replies
ADVERTISEMENT
Jul 17, 2010
I need to know how to configure SRP527w without a static outside ip address to establish a VPN tunnel with VPNC3000.
View 31 Replies
View Related
Aug 13, 2011
i am trying to configure static ip on remote client user side , i am using the following doc as an example but i am not getting the ip which i am mentiong in the user .[url]...
View 10 Replies
View Related
Oct 9, 2012
I have a static ip , So how co configure my server 2008 for the access from internet [URL]
View 1 Replies
View Related
Apr 20, 2011
I have what I feel is sort of a strange issue. When I have systems on my home network get their IP from DHCP, they can get to the internet just fine. But it seems that when I assign a static address, they have local network access only, and will not get a connection to the internet. My windows 2008 server is the big problem with this one.
View 10 Replies
View Related
Aug 3, 2012
When I was hosting a server on minecraft, a few people complained that the server was down. It was, and the problem is that my router switched to a dynamic IP after comcast installed a security system to my house. If I try to reset the router, the system goes down and takes a helluva long time to get back up. Whenever I try to switch to a static IP, however, I lose internet connection. Wondering how to fix this. Or do I have to switch back to my laptop - which might also not even work. (I'll go try that, but I'm using my desktop because it has extra RAM.)
View 19 Replies
View Related
Jun 29, 2012
do internet cafes use static ip or dynamic ip address. Also what would be the benefit if they used a static ip address.
View 1 Replies
View Related
Feb 28, 2012
I am using D link Wireless router and the Model is DI-524 I am unable to configure the router with static Ip as the ISp having Static Address.
View 4 Replies
View Related
Mar 30, 2012
how to configure it. So far googling and using the router's built-in help feature hasn't been of use. First off, here's my setup:NETWORK A with default gateway of 192.168.0.1 and a subnet of 255.255.255.0
NETWORK B with default gateway of 10.10.100.1 and a subnet of 255.255.255.0
I want B to connect to A since that's where I have my domain setup with active directory.
Now from my understanding the Destination LAN IP should be the network I want to connect to, in this case 192.168.0.1. The subnet mask should be 255.255.255.0 and the default gateway should be 10.10.100.1. However, when I do this, the LinksysE200 throws out an 'Invalid Static Route" error. What am I doing wrong? Also, here is the routing table as given by the E200:
View 1 Replies
View Related
May 2, 2012
I have a problem viewing my security cam on my android IP cam app.I forwarded port on my router to my security cam then fixed security cam to have a static IP but my computer being on DHCP, after reboot changed IP, so I lost connection to android IP cam app.I read on a forum,that If your camera is using DHCP,setup your router so that it always gives the same static IP address for the camera based on it's MAC address but where do you set this up a Linksys E1000 router & on Samsung Y? so I can view my security cam on my android IP cam app.?
View 9 Replies
View Related
Jul 3, 2011
Is there an alternate way to get the DNS settings off of the router? I've followed all of the steps up above, but I cannot set up a static IP Address on my computer without knowing the routers DNS settings, which I cannot retrieve from the web-based setup due to the corrupt firmware.
View 2 Replies
View Related
Mar 5, 2012
I"m having one problem though. On my old router it had a feature to assign a static IP to a mac address.
So that computer would always get 192.168.10.101 as the IP Address.
How do I do it on this router?
View 3 Replies
View Related
Sep 9, 2012
My old modem from Roadrunner (Time Warner) died and the service man replaced it with a Arris TG852 modem/router. then my problems began. I would like to have the Arris modem act like a modem and not a router. The network governed by the DIR works fine but none of the clients can connect to the internet. Below are the steps I have tried.in both steps below, The DIR is connected to the Arris using the Ethernet not the Wan port.
1. I tried disabling DHCP on the Arris router and setting a static IP address for the DIR router. This worked for a bit and then quit. Some of the computers said there were duplicate IP addresses on the network. If fact the same IP address showed up in the DNS list of the Arris and the DIR routers.. even though the Arris router had DNS disabled.
2. After reading other forums. I enabled DHCP on the Arris and set it to passout IP address between 192.168.0.2 and 192.168.0.99. I then setup the DOR to pass out addresses between 192.168.0.100 and 192.168.0.200. then moved the DIR into the DMZ of the Arris. Still no access to the internet.
View 2 Replies
View Related
Apr 10, 2013
I have a Swann Communication security camera system with their DVR8-4000 hooked to an IPv4 router, connected to the Internet using the new HughesNet Gen4 service. The Swann DVR wired to my router requires a static IP address. HughesNet Gen4 is implemented with IPv6 and I am told that it does not accommodate an IPv4 type static address.
I have discussed the issue with both company’s technical support. HughesNet Gen4 reps recognize the issue and may support static addressing in the future, but not now. Swann reps will not modify their implementation because of the relatively small Gen4 market. The Swann rep suggested that replacing my IPv4 router with an IPv6 router might resolve the “static IP address” issue.I am looking at several Linksys IPv6 routers including the EA4500 SMART WiFi Wireless Router N900, but know too little about IPv4, IPv6 and router/static addressing to proceed unassisted.
1) can I implement a static address with an Linksys IPv6 router cdonnected to Gen4?
2) Which Linksys routers offer IPv6 support?
3) How does one go about setting an IPv6 static address using HughesNet Gen4 on a Linksys router?
View 1 Replies
View Related
Nov 10, 2011
My printer (HP7210) is wired connected to my WRT54GL router. 2 computers have also a wired connection, my laptop is connected wireless. All these computers use the connected printer. 2 computers can only use a static IP-address for the printer. How can I set a static IP address in my router?
View 3 Replies
View Related
Nov 5, 2012
My current set up is 1 HQ router (2911 ISR) and 8 site offices with a non-Cisco router.Each site has an IPSEC tunnel back to the HQ router.All of the site routers have a dynamic external IP address.This set up has worked ok for now, but I would like to look at moving to GRE tunnels so traffic from the sites can be routed to each over.I have read up on the configuration and I can set up an IPSEC GRE Tunnel in test labs using a static IP address on the spokes however I have not been able to find any documentation on how to configure the HQ router to allow the tunnels from any IP address.I did try setting the tunnel destination to 0.0.0.0 on the HQ side but this does not work.
View 5 Replies
View Related
Oct 8, 2012
i received a public ip from my ISP and need to configure to enable access my server remotely
View 1 Replies
View Related
Mar 29, 2011
I remember long ago I was upto some trial and error with my router and I ended up in changing some ip that I didn't know about that time, now when I was trying to forward some of the ports. I addressed the computer to 192.168.1.1 (as this was my ip that time I remember and on the box its written too) but it didn't respond, then I remember that I have changed this ip to something else and now I can't remember this.
View 7 Replies
View Related
Jan 26, 2013
I have routing enabled, can build a static route, and go back and see it (sh ip route), but I don't know how to get the route right. I have one host (Host A) on Vlan 20 w/192.168.20.2/24 dg 192.168.20.11 (the vlan ip) and (Host B) on Vlan 30 w/192.168.30.2/24 dg 192.168.30.11 (the vlan ip). I can't ping them from any host man. I can ping the Vlans but not the host.
View 19 Replies
View Related
Jun 10, 2011
I am setting up a Cisco ASA 5505 first time for My organisation, I usually setup Cisco Router, I have 10 Static IP, & Have 6 Server (S-1, S-2, S-3, S-4, S-5, S-6), Traffic Should be pass through the ASA and is distributed to the destination server that is specified in the packet. LAN servers can be separated into discrete networks for security. For example, a private LAN for internal traffic accessed only via remote dial-in VPN sessions and Want to Configure DMZ for Server (S-4, S-5, S-6) that allows public web traffic.
I have Attached My Network Diagram I have some question,
1:- Can we Configure Multiple Static IP On ASA 5505 ?
2:- If Diagram is wrong what change need to be done ?
View 2 Replies
View Related
Sep 23, 2011
I have a Pix 501 running 6.3 code sitting behind a cable modem. I use ip address outside dhcp setroute because I don't have a dedicated IP from my cable provider.
How do I configure the Pix to host VPN connections from my iPad when offsite? Since the outside interface is going to change, I can't configure a static IP.
View 1 Replies
View Related
Dec 6, 2011
I have one Cisco 3560, and it is connected to Firewall...I already turn on the ip routing, which is able to do interVLAN..In 3560, the static route is 0.0.0.0 0.0.0.0 192.168.2.2
3560 (port 1) =====> Firewall (port 1) ======> Internet (WAN)
192.168.2.1 192.168.2.2
Which mean... anything from 3560 will be rote to Firewall port 1 (192.168.2.2) and all the user behind 3560 will able to connect to Internet (WAN).
I want different setup now, I'm trying to configure another port (port 2) from Cisco 3560 connect to Firewall port 2...
3560 (port 2) =====> Firewall (port 2) ======> Internet (WAN)
10.1.1.1 10.1.1.2
I want subnet 10.1.1.x route to different gateway (10.1.1.2) to Firewall go out to WAN... and not using 192.168.2.2 gateway to WAN.
View 10 Replies
View Related
May 13, 2013
Right now I have a lab setup with a couple of these AP's.They are both doing DHCP to get their IP address from a 5508.How do I set a static IP address on the AP?
View 5 Replies
View Related
May 26, 2012
I am trying to give an static ip address to a time clock on my network and for some reason when I connect time clock to network it will always get an ip address from a different network. for example my computer IP address is 192.168.2.70 when connected to network, my default gateway is 192.168.2.1, the IP address that the time clock always gets is 192.168.1.120, there is no way to tell the time clock what IP address I wanted to be it has to get it from router (that is what the manufacturer told me), router (16portLiksys) does not have DHCP enabled the guy who set up network left it disabled, on his notes he says server (dell server T110) is acting as router is that true that a server can be acting as router?what do guys think is going on here?all the computers hooked up to network have static IP address.I also notice that when I connect a computer to router it will get an IP address from different network the same as time clock.I tried to reserve ip address on router by entering MAC address from time clock but it won't work. I am not very familiar with the server settings I have not try changing settings on server, I am not even sure the guy who set up network is right about using server as router.
View 1 Replies
View Related
Mar 15, 2013
I have two different locations, two different ISP�s .
Cable �Modem--------Linksys Router WRT54G
DSL-Modem----------Linksys Router WRT54GS
One computer (Windows 7 Laptop) which travels between both locations.Can I or how do I setup a static IP address for both locations on my computer and not have to change settings when I change locations?
View 1 Replies
View Related
May 14, 2011
I got an issue when configure my 12416 router.
I plan to configure Static route load-balancing, which just assign different administraive distance to static routes.The route with lower distance is preferred. For example, if ISP A is our primary Internet provider the default route may be configured with a distance of 1 (all static routes are assigned this administrative distance) and the default route through ISP B may be configured with a distance of 100. In that case the default route through ISP B will be used if only the route through ISP A becomes unavailable.
But when I trying to configureWith Enhanced Object Tracking to do the route failover (a generic track object can monitor presence of an ip route, state of an SLA), I found my IOS not support such Track command. [code]
View 2 Replies
View Related
Aug 4, 2009
Basically I have an internet router (1841ISR) with 1 internal (LAN) connection and 2 internet connections. What I want to do is route specific traffic for 3 of my internally hosted services (smtp, https, etc) through one internet connection (fa0/0) and then route all other traffic through the unmanaged/dynamic IP ADSL connection (Dialer 0).
View 9 Replies
View Related
Feb 7, 2012
configure my cisco 892 router want a static ip address assigned to the interface because and I have no more internet on the router because am working on my network academy for CCENT?
View 28 Replies
View Related
Apr 10, 2011
I am trying to configure ASA to assign same static ip address to certain user(User1) every time when he connect to network via AnyConnect client. We have Windows AD and use LDAP AAA server for authentication of VPN Remote Access users. I found in document "Cisco ASA 5500 Series Configuration Guide using the CLI, 8.2" in section "Configuring an External Server for Security Appliance User Authorization" explanation and configured ASA and User Properties in AD on exectly same way:First, I assigned static ip address in properties menu(dial in section) of User1 in Active Directory. Then I created ldap attribute map where I mapped msRADIUSFrameIPAddressattribute to IETF-Radius-Framed-IP-Address attribute. At the end I applied this ldap attribute map to AAA server group LDAP.
Although I set this up, whenever I connect using User1 credentials from AD I still get ip address from vpn pool instead static ip address that I configured. In output of debug ldap 255 command I found line "msRADIUSFramedIPAddress: value = -1062718956" but not any line that prove mapping above mentioned attributes.It seems like mapping is not working.All AnyConnect users get parameters from defined internal group policy on ASA,including addresses form pool,dns server etc. I want that User1 get static ip address and inherit all other parameters from group policy.
View 4 Replies
View Related
Apr 22, 2013
My second problem with sg200-08 (firmware: SG200-08x_FW_1.0.6.2.stk) is when I try to add specific MAC address as secure:MAC Address Tables - Static Addresses - Add; insert vlan id, port, mac address and select "Secure":I get error message: "Error: Failed to Add 'Static Address' entry.
View 3 Replies
View Related
Jan 28, 2011
This is the situation in our Lab.We have one telephone line with broadband connection and a system which is connected to a modem to use this broadband facility. Recently we have taken two static IPs over this connection for a project work.Now what I want to know is, how to configure these static IPs, so that I can connect two systems (each one to one static IP) to use these static IPs and continue to access the internet in the 3rd (already present) system.
View 7 Replies
View Related
Jul 11, 2011
I am connected to a static ip network. This network sets local ips to connected computers but general ip is the same: static ip of network. When i go to "whatismyipaddress", I can see this static ip. I want to change my ip address. I have no chance to use proxy server or router connection. Is there a way to change my ip address? (Because some sites ban ip address, ex:rapidshare etc. and I need to change my ip)
View 1 Replies
View Related
Jan 7, 2013
HP wifi printers (I've had 2 over the last several years)eventually have a disconnect with my wifi router and was told (by an experienced IT guy from my last job) I should assign the printer a static address to eliminate the problem. How can I assign a static address to my printer. Here are the models Router: Belkin model F5D9231-4v1(01); Printer HP Officejet 6600. I know how to access the printer and manually enter an IP address and subnet and such, I just don't know which numbers to use where. I also know how to access my router, via typing in the IP address in Internet Explorer, but i'm unsure of which tab within the router's page (i.e. is it category wirelessunder MAC address control) or which numbers (IP address or MAC Address)and where should I get the correct numbers from (i.e. go run, cmd,IPconfig/all).
View 6 Replies
View Related
