Static IP / Configure Server 2008 For Internet Access?
Oct 9, 2012I have a static ip , So how co configure my server 2008 for the access from internet [URL]
View 1 Replies
ADVERTISEMENT
Static IP For Windows 2008 Server R2
Jun 17, 2012I want to run my own web server. i have Windows 2008 Server R2. we hv one router for internet and it is linked with switch. 30 computer are running on local LAN and getting Internet. now my ISP give me a block of IP. i want to give it to web server. what is the simplest way to use that IP and my web server is Online and also all user have to access to Internet.
View 4 Replies View RelatedStatic Ip Is Not Working On Server 2008 Via VMWare 0.7?
Nov 2, 2011I install virutal machine "VMWare Workstation7" on windows 7, i am mcitp student for practice i am using windows server 2008 on VMWare, but i can't assign static ip whenever i assign ip it show no access to the internet?
View 3 Replies View RelatedServers :: Deny Access To Server 2008 Allow Internet?
Jan 18, 2011I set-up my law firm network with a server 2008 database. Now I am renting out one of my offices to a separate lawyer and I want him to be able to use my network to access the internet, but not my server 2008. Is that possible or is it already secure being I haven't installed any of my software on his computer?
View 2 Replies View RelatedSetup 2 Network Cards In Server 2008 R2 To Access Internet For Lan?
Sep 2, 2012My Windows Server 2008 r8 has 2 network card
1st card I have connected to Internet Router
2nd card I have set up the LAN to access the database application from server with 2 clients.
Question
1) Currently 2 clients can't access the internet
2) How to setup the 2 clients to be able to access to internet?
Configure DHCP And DNS On Windows Server 2008 R2?
Apr 16, 2013I want to set up a domain for a file server and MS SQL 2005 server on my server machine and installed windows server 2008 in it.
Do I need to set up DHCP server and DNS on Windows server 2008R2 or leave them to the router to do the job?
Configure In Windows Server 2008 Network NIC1 Is WAN / NIC2 Is LAN?
Mar 29, 2011How to configure in windows server 2008 network NIC1 is WAN and NIC2 is LAN?
View 1 Replies View RelatedCisco Wireless :: WLC 5508 - Configure IPSec Between WLC And Server 2008 NPS?
Dec 13, 2011I have been unable to get IPSec working between my WLC 5508 and a server 2008 NPS radius server. Any luck configuring this? I have opened tickets with both Microsoft and Cisco, but so far have not been able to configure it properly.
View 2 Replies View RelatedServer 2008 - Share Internet Through DHCP Server
May 6, 2012[code]...
I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server
Servers :: Server 2008 Local Only Access?
Oct 31, 2011Our companies dc cant connect to the internet and can only access the local networkI configured everything correctly eg ip adress dns and default gateway
View 1 Replies View RelatedTwo Nics Enabled But Cannot Access Windows 2008 Server?
Apr 15, 2011The situation is I have a windows 2008 server with two nics, connected to two routers. The routers are connected together as well. This diagram might explain further:[url]....
Each router effectively defines a completely different network. The server nic connected to the internet facing router is configured with minimal properties (no ip6, no file sharing, no netBIOS over tcp etc), the nic connected to the internal router has mostly default properties. Both nics have static ip addresses. Both networks define a subnet of 255.255.255.0. The nics are not bridged in the server and it is not acting as a router or anything network related.
The problem is I cannot access the server when both nics are enabled. If I disable the nic for the internet facing router, then everything is fine. If I establish a connection to the server such as through remote desktop, then re-enable the nic it still works but I can't ping or make new connections.
Servers :: Windows Server 2008 / Access Restrictions To Shared Folders
Oct 25, 2011we have two servers in our network, one functions as a file server (windows server 2008) and the other as a domain controller with active directory and some database applications running on it (windows SBS 2003). the file server has folders for the different units in our company, these are shared folders. these folders can be accessed by anyone with a domain login by running \servername from their computers, without any further authentication required.
i have tried to set up sharing restrictions with no success, for example the Accounts folder, i right click on it and select properties, and the sharing or security. under both tabs i added three names of those that i want to have access to the folder. these names appear in the sharing list together with:administrator(servernameadministrator) administrators (servernameadministrators) administrator systemeveryone has not been added as is the case with all other folders. what is this system on the list? how i can restrict access, perhaps there is a setting that i have missed or settings in the network that prevent these restrictions?
Connect To Internet From Local Dns In Windows Server 2008?
Dec 15, 2012I build a local DNS for namming my local network on windows server 2008 , but due to setup local DNS ,when I want to connect to internet from my pc , I can't do it . because my DNS set with a local IP such as 192.168.1.10. What can I do that have an Internal DNS and can use internet with that too.
View 1 Replies View RelatedCisco WAN :: Configure 861 Router For Internet Using Static Ip Address?
Apr 5, 2013I am having a cisco 861 series router.The Cable from the isp was connected to fastethernet4(wan port)
Following are my isp details
IP address:172.16.62.130
subnet:255.255.0.0
default gate way:172.16.62.1
dns primary:202.153.32.2
secondary:202.153.32.3
How do i configure this details in the router and access the internet in my devices.
i want the network to be in 192.168.1.0 to 254.
how do i configure my router with this details using cisco configuration professional
Cisco VPN :: 2811 - Static NAT Causes Unable To Access Server Via Internal IP
Nov 22, 2011I running site-to-site IPsec VPN in Cisco 2811 IOS 12.4 both site. Here I encounter a problem to access server on Site A from Site B
Site A having Leased Line connected to router with Public IP. I have done static mapping 1 web server to Public IP (NAT). This to allow external users to access the server via Public IP. At the same time, users at Site B would need to access to same server via Internal IP since they have Site-to-Site VPN established. But once I done Static Mapping (NAT), user at Site B unable to access the server at Site A using its internal IP. But external user can access server via Public IP. What went wrong here. Do i need to add extra command to get this done?
Cisco :: Windows 7 2008 Duplicate Static Address When Using 3750
Apr 30, 2013ISE 1.1.3
Cisco 3750 switches
Windows XP / 7 / 2008 clients
I'm having some weird issues were if a client connects to a switchport and happens to be using a static IP address then the client warns of a duplicate address problem. Also the client will then only show the default gateway within ipconfig even though the IP address / mask is still in the GUI network properties of the adaptor. This is happening with Windows 7 and Windows 2008 devices.
Windows XP clients don't get the issue.
Some clients will use 802.1x native supplicant and some will be authenticated based on MAB. Not noticed the problem with 802.1x clients but it always occurs on MAB.
I came across a similar issue here: URL
Going of that blog I tried using the "ip device tracking delay probe delay" command but the switches don't recognise the "delay" keyword.
The switches are 3750 switches running version 12.2(58)SE2.
All I have is "count, interval, use-svi" as extra options.
Catalyst 4500 switch guide has "delay" option but no "count, interval or use-svi".
The only way I have managed to avoid the problem is using the second solution which is a registry hack on each client. This is fine for the odd server but not realistic when there will be hundreds of other clients.
Can't Connect To Server 2008 Via Server Manager On Windows 7
Feb 11, 2011I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View RelatedServer 2008 R2 Windows Server Backup
Dec 14, 2010I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
Linksys Wired Router :: Static Route To Access TMG Internal Network Through RV042 Pptp Server?
Mar 20, 2012Currently i am having a scenario where i have setup RV042 and which is connected to Microsoft Forefront 2010. PPTP works fine only on rv042 subnet but i am not able to access the "internal" network of TMG.RV042 (172.16.1.1) ---> TMG [external] (172.16.1.2) ---> TMG [internal] (192.168.1.1) Is there any way through static route to access the TMG internal network through RV042 pptp server?
View 1 Replies View RelatedCisco :: Configure WAP 321 To NPS On Windows 2008?
Feb 3, 2013We want to configure a Cisco WAP 321 to NPS on windows 2008.
On NPS system event viewer :
An Access-Request message was recived from RADIUS client XXXXXX with a Message-Authenticatior attribute that is not valid.
We have installed other RADIUS client on Windows 2003 Server and we have the same error.
On the Web interface of Cisco WAP only can configure the IP and password of the Radius server.
Cisco :: Configure PEAP With ACS 5.0 Windows 2008?
Jun 11, 2012configure PEAP for wireless with Windows 2008. The doc we have only mentions Windows 2003. When we follw that document we get a faulure when we try to bind the certificate to we have generated to ACS 5.0 .
View 1 Replies View RelatedCisco Firewall :: Configure ASA5505 To Allow CTIW On SBS 2008
Apr 18, 2011When using the connect to the internet wizard in SBS 2008 (CTIW) the server comes back with an error that it cannot communicate with the router.Are there any settings that need to be configured in the ASA 5505 to allow communications with SBS 2008 using Exchange Server 2007? I am using ASDM 5.2 at this time.
View 3 Replies View RelatedCisco AAA/Identity/Nac :: Configure ACS 5.4 As Radius Server For Network Access
May 1, 2013I'm trying to configure ACS 5.4 as radius server for network access (PPP connections).In monitoring and reports the users have green color , but the clients cannot send data. Auth method is CHAP/MD5.
Allowed protocols are set to CHAP and PAP only.
Cisco Switching/Routing :: Unable To Configure Access Server On 2509
Mar 26, 2012I am having trouble trying to configure my cisco 2509 cisco router for access server. I have two guides shown below: URL and URL
However I am running into some problems. I can go through the second guide up until it asks me to do this command
Step 5: Configure the transport input protocol on the async lines to Telnet.
Access_Server(config-line)#transport input telnet
I cannot put in Transport Input, I only have the option of doing Transport Output let me show some lines from my console:
---------------------------
Access_Server(config)#line 0 14Access_Server(config-line)#no execAccess_Server(config-line)#transport input ?% Unrecognized commandAccess_Server(config-line)#transport ? output Define which protocols to use for outgoing connections preferred Specify the preferred protocol to use
Access_Server(config-line)#transport
------------------------
Im not sure whats going on. I have two routers(cisco 2600 series) plus my 2509 cisco router I am going to use for a access server. I have a two switches 2950 series and I have the access server connected to all of them via a octal cable.
Here is the configuration from the access server:
--------------------------------------
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-IS-L), Version 12.3(26), RELEASE SOFTWARE (fc2)
Technical Support: [URL]
Copyright (c) 1986-2008 by cisco Systems, Inc.
Compiled Mon 17-Mar-08 14:39 by dchih
cisco 2509 (68030) processor (revision M) with 14336K/2048K bytes of memory.
Processor board ID 22840809, with hardware revision 00000000
Bridging software.
Cisco WAN :: 1921 With Static IP Won't Access Internet
Feb 24, 2012I have the same 1921 router that I am trying to install at a facility with a Static IP address and Static DNS information to get on the internet and I cannot get the 1921 to access the internet!
Here is my config:
Building configuration...
Current configuration : 4072 bytes
!
! Last configuration change at 09:51:57 Chicago Sun Feb 26 2012 by fbcpekin
! NVRAM config last updated at 09:51:58 Chicago Sun Feb 26 2012 by fbcpekin
[Code]....
Windows Server 2008 With Reg Key?
Mar 7, 2013I am running a small network of 30 pc. I have installed windows server 2003. Now i want to upgrade it to server 2008 but before that i want to test windows server 2008. That is why i,m looking online for a copy of windows server 2008 with reg key. Is there any good and trusted place to get windows server 2008.
View 1 Replies View RelatedHow To Install AV On Server 2008
Feb 26, 2013So as far as I can tell our server is not running any AV whatsoever, so I'm buying Kaspersky Small Business with the 10 PC package:Kaspersky Small Office Security | Virus Protection | Kaspersky Lab to install on it and our other PCs, and I was wondering if there's anything I need to know about installing AV on a server.
View 19 Replies View RelatedWindows Server 2008 R2 VPN
Aug 13, 2012I have a dedicated windows server 2008 r2 enterprise.I am running an SSTP VPN but only have 2 IP address to connect to the internet on.My issue is that one of the IPs is for the IIS7 etc and the other is for VPN use.How can I apply the same IP to more than one user allowing them to connect all at one.There are in total about 5 users who want to use the VPN service and I dont really want to pay.How do I apply the same IP to all accounts and allow them to connect and all use the same IP at once.
View 5 Replies View RelatedXP Pro Connection To Server 2008
Jul 22, 2012Still trying to get this XP pro SP3 to connect to or log into the server, a Windows 2008 jobber. I get the pop up that says unable to access the server, may be a permissions issue. I am administrator on both though and it should not be an issue plus I can ping each machine from the other. The XP machine does not show up in the network on the server though. The server shows up on the XP but then will not allow me to log into it. I changed all user names and pass codes on all the machines to be the same and it cleared up a number of issues except this one. The network name on the server is Network 2 and on another machine the network is named Network 3. Don't know what this means. This XP machine used to connect to the server without issues. My server guy moved away and well, I am just not that savy on 2008 Server. All the other machines are Windows 7. Oh yes, this is a work group with DHCP from a VPN and a Comcast (bless their souls) gateway.
View 2 Replies View RelatedLinksys Wired Router :: Configure Cisco RV042 To Access PPTP VPN Server?
Jun 7, 2012how i can configure the Cisco RV042 to access PPTP VPN Server (Witopia VPn) or other vpn servers.
View 1 Replies View RelatedCisco Routers :: No Internet Access With Static IP And RVS 4000
Oct 26, 2011I have an RVS 4000. I have several PC's to which I have assigned static IP addresses. I have recently upgraded most of the PC's to Win 7 (64) machines. I updated the firmware on the RVS4000 to 1.3.3.5 in conjunction with this. After such update (and actually before as well) I could not assign a static IP address to a PC and have access to the internet. It connects fine to my LAN, just no internet access. This is also affected on several other machines running Win XP and Win 2003 Server, so it's not just this computer.
I have:
1. Shut down (powered off/unplugged) everything, router, DSL modem, switches, server, etc.
2. As I said firmware is current.
3. Yes, DNS servers and gateway, subnet, etc. are all correctly specified on the PC.
4. Router is set for gateway mode.
5. Set to only IPV4.
The only way it allows internet access is to use DHCP. I've even tried taking the IP address via DHCP and manually assigning the DNS servers and that works fine, but as soon as I assign a static IP internet access is immediately gone.
There must be something I'm missing, but I can't seem to find it.
Everything worked fine prior to the conversion of the Win 7 machines, i.e. I had several PC's with static IP's and no problems.
Servers :: Net Send Is Not Available In Server 2008?
Aug 24, 2011net send command not available on server 2008
View 1 Replies View RelatedTerminal Services On Server 2008
May 26, 2011I have rolled out Terminal Services on Server 2008 R2 for a company I used to work for, it worked perfect the users could go home and browse to our web domain and login and use apps straight from the server.there'd be no Microsoft stuff to be accessed just pure Linux Servers but probarbly if users access the online terminal services on Linux they'd be using a Windows PC
View 1 Replies View Related
