I have a dlink(wireless n-300) router going through a netgear wireless g router, i have an intel wifi link 5100 agn in my acer aspire 6930g laptop & the isp is high speed cable (Shaw cable). My question is, why does my computer have to reset the router every minute or so? It takes forever to get anything on the web which could be Bitdefender 2012 plus security?
View 1 RepliesFor reasons that are slowly pushing me over the edge of insanity, I have to reset this dumb router!!
I press the stupid little button on the back of it, the lights go out, one amber one comes on etc. etc. but when I go to 192.168.0.1, everything is still the same!!
Like the passwords are still there and nothing has changed! I thought resetting it was supposed to wipe all that stuff out so you could start from scratch? Also pulled the power cord in and out a zillion times but no way it will reset!
As an aside, I am having no end of problems getting my iPads (2) and iPhones (2) to connect to the wireless network! The "Network Discovery" button will not stay checked and though I have done all the Googling and been into Services to start things running, no way it is going to work!
But I digress, how do I get this fool of a router to reset properly?
I reset the router and now it doesn't have a default gateway address. It stops on the check for network status when trying the install wizard and says it can't install it.
View 2 Replies View RelatedMy Dell Dimension is no longer connecting to the internet via the wireless router. I have a dlink DI-524 and a dlink wireless USB key but it no longer connects. This just started today. When I try to repair the connection, it fails on "renewing IP".
OS is Windows XP.
P.S. I have tried power cycling the modem/router but nothing works. Other computers can get on the internet via the wireless router fine.
trying to connect an old PC to my home wireless network.I brought home a PC I have used for years at my office. I have it configured with a Realtek wireless card and was able to connect it to my office wireless network without a problem.But, when I try to set it up at home, it won't take. I have a dlink router that is working fine with several Mac computers in my home, so I know the router and network are up and running fine.The PC uses Windows XP. The icon in the lower right corner says dlink is connected and there is strong signal strength. However, when I check the dlink status, it shows that 2,573 "packets" are sent, while "0" are received.I've tried to connect to the internet using Mozilla, Safari, and Explorer. Each says the server cannot be found and that the internet is not connected.
View 5 Replies View RelatedFor some reason my wife's laptop has lost its connection to my router and when I put in what has always been my security key it gives me an error message saying that it has to be such and such for WEP ?I logged into the D-Link router but could not locate the place where the security key is set. Any way to that part of the firmware so I can reset the security key.
View 1 Replies View RelatedI have a home network that uses a DLINK DIR-655 router. All of my devices ( a mix of wireless and wired) except one--a windows xp SP 3 desktop that stopped working yesterday. Some viruses, and adware were detected and it has not worked since then. What I have done.
View 11 Replies View RelatedCan't get my computer to recognize my wireless Dlink DIR615 Router. It accepts the password and connects to the router but not the internet
View 2 Replies View RelatedI'm trying to hook up a D Link 150 601 router to my time warner w/road runner computer but it won;t on DHCP I'm lost as what to do.
View 1 Replies View RelatedI have two computers linked to our d link wireless computer, i am trying to connectmy childs computer but it dosnt even come up as a available connectionThe wireless button is on, why it dosnt come upas an available connection
View 1 Replies View RelatedI need to reset my DLink wireless modem all over again, can't get it to recognise the router, so thought that it would need to reset to factory defaut, how can I do this. Tried just hitting reset on the router,but nothing is happening.
View 4 Replies View RelatedIf my computer has been sitting for a while without using the internet and i open my browser the dsl and internet lights on my router shut off for about 15 seconds and no one in my house has internet and then it turns back on. this ONLY happens when it has been sitting for a while with the browser closed and my computer is the only one that makes it do it. also i don't have my computer set to sleep after a certain time, my monitor turns off after 5 minutes and that's it. i have a siemens gigaset se567 and my isp is telus.
View 1 Replies View Relatedi don't know the ip address of my DP-301p+ print server. how can i reset it to default ip address
View 1 Replies View RelatedI recently bought a new laptop (Asus U47VC) and i am having internet connection issues. When I am at my mother's place or at school, I have no problem connecting to the internet wirelessly. However, at my father's place, my internet stops working every couple hours and will be unable to connect to the network until i reset the router and modem. Once the reset is complete, I am good for another couple hours. All the other devices ( laptops, iphones, etc.) do not have this problem and the connection is never an issue. I have read that this could possibly be a problem regarding IP addresses but I do not quite understand how to fix this.
View 1 Replies View Related I've recently purchased the EA3500 dual band wireless-N router to replace my old and somewhat tired WRT54GS. The old router worked, I just decided to upgrade to wireless-N since all of my devices are now capable.My ISP is Comcast and I use a Motorola SB 6120 cable modem. After an extremely easy setup of the new router last week, I experienced one full day of glorious speedier network and internet traffic. However, roughly 24 hours after installation I started experiencing intermittetent internet connectivity issues. As in - the cable modem is accessible for 2 minutes and then can't be found for 2 minutes, repeat forever.
After multiple different troubleshooting steps, including rebooting both the modem and the router together, separately, and releasing and renewing the router's IP Address through the router's admin page, I finally ended up resetting the router back to factory defaults and letting Windows 7 guide me through the re-installation rather than using the provided "easy setup" CD from Cisco.
This seemed to have worked, but 2 days later, my "every 2 minutes" issue returned.
Something important to note here is that all of my devices - both wired and wireless - are able to communicate with each other without issue. For example - while I have no access to the cable modem, I am able to stream music from a wired desktop through a wireless laptop to a wireless receiver connected to my TV. I am also able to access the router's admin tools during my connectivity issues.
Is there any way to make it so that my computer has two internet connections, so to my router it looks my computer is two separate computers, and would this increase my speed, since my router is made for up to 15 connections and has only 300mb/s to give out, so [would]each computer is[be] only limited to 20mb/s? As of now I have a dlink xtreme-n DWA-552 adapter in my computer.
View 2 Replies View Relatedwe got a Sonicwall router and we have been having stability issues. Every 1 minute the TCP connectio is dropped as well as UDP packets. This router is connected to a T1 connection and its requesting a DHCP lease every couple minutes as well. We originally had two WAN connections, and we have disabled the second one because someone thought it was that, but obviously it has to do with the internal network. This is a dual WAN router.
View 4 Replies View RelatedI started my PC (aser) as usuao but did not connect to internet that i am using TP Link modem/router, I turned laptop on and get conected the wireless is working fine, serached about TP links solutions and applied all of them, before I was using "obtain IP automatically" then I used to insert the required IPs manually, applied and save and restarted several times... still cannot connect to the internet while I still connected to the same modem+router via laptop wireless connection,
Finally I decided to format and installed new OS XP, though some wrong error was with my OS, unfortunately even after installing new OS still not able to connect, I checked the IP and tried both options and still cant access, i never experienced such..
We have a 1921 router that has WebVPN (Any connect) enabled on it as well as IPSEC. When a user logs in using IPSEC client they stay connected no issue. IF you connect using Any Connect it will disconnect you after exactly 10 minutes. Never a second more or less. I ran some “debug webvpn” and the disconnect looks to be a planned event and reports no error it just sends the disconnect command. However, if you watch the buildup you get the following message from Debug.
003960: Jun 7 09:09:06.833 NewYork:
003961: Jun 7 09:09:06.833 NewYork:
003962: Jun 7 09:09:06.833 NewYork: [WV-TUNL-EVT]:[3318C168] CSTP Version recd , using 1
003963: Jun 7 09:09:06.833 NewYork: [WV-TUNL-EVT]:[3318C168] Allocating IP 172.18.249.50 from address-pool IPRange1
003964: Jun 7 09:09:06.833 NewYork: [WV-TUNL-EVT]:[3318C168] Using new allocated IP 172.18.249.50 255.255.255.255
003965: Jun 7 09:09:06.833 NewYork: [WV-TUNL-EVT]:[3318C168] Full Tunnel CONNECT request processed, HTTP reply created
[code]....
The highlighted entry is a session timeout set for exactly 10 minutes. I cannot find how to change, remove, or modify this setting. Google has failed me in my ability to find this timeout setting.
im on widows seven and it is a lenovo laptop. It cuts out every minute or so. it say not internet access in my network connections. my router is netgear swell i think. its security type is WPA2-PSK. It mainly happens when i go to play an online game called roblox but also happens when i open up any normal pagge as well. I looked for the WZC but I coudnt find it.
View 1 Replies View RelatedI got a new laptop (Toshiba Z830) last month and for the last few days my wireless internet keeps disconnecting and reconnecting after about a minute. It'll disconnect and say there's no internet (there's a yellow exclamation mark on the icon on the taskbar) and after about a minute it'll reconnect. I don't know if there's a pattern but I've noticed it keeps happening when I try to watch a video on youtube and sometimes at other times. No other device of mine is having any problems (desktop, phone, netbook), just my laptop.
View 1 Replies View RelatedI just brought home an older desktop and my wireless connection seems to disconnect about every 30 seconds to a minute, then reconnects.
The only other devices that we are using wirelessly are our phones, which we never notice a problem with. When it is connected, the signal stength is excellent. It just keeps dropping. Speed 72.0 mbps.
I am using a Linksys E-1200 wireless N router, and a Belkin N150 USB adapter.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz, x86 Family 15 Model 4 Stepping 1
[Code].....
i want to set up my wireless router it is currently set on a static ip but i want to set up in pppoe(username/password) mode i set up once in pppoe but internet is not working?
View 7 Replies View RelatedI have a PC connected to the internet via a d-link 615 router and a cable modem.The PC is hardwired to the modem and the laptop can connect wirelessly via the router.I own a HP 6280 Network MFD and would like to locate this in a separate room to the PC.I own a Linksys WAG54GS mobem router from my last ADSL connection.Can I site the wireless router with the MFD and use it as a wireless hub?
View 4 Replies View RelatedI have a new Dlink wireless router. Previously I had a Belkin router. The new one was said to have stronger signal. I am not able to connect via wireless to the router from a PC with Windows Vista. It works fine when I use a cable. Then I am able to connect to Internet via the router. Also, I am able to print on a wireless printer. It is also possible to use Internet from an Ipad with wifi.
The Belkin router had a different network, 192.168.2....When the cable is connected I can ping 192.168.0.1 but not when I remove the cable. In Windows Vista the connection has status "connected". When the cable is connected, the ipconfig /all is printed as below. It is a Swedish version. Some translated words:
Tr�dl�s = Wireless
Ja = Yes
Nej = No
Fr�nkopplad = Disconnected
[code]...
I have a Dlink DIR-615 wireless router. Without re-setting or changing the password I want to block my neighbour from using it as he knows my password
View 19 Replies View RelatedI recently bought a new D-Link DIR 615 but I dont get adequate range in the rooms farthest away from the router. I have an old D-Link DIR 634M router which I'm told can be used as a wireless repeater. I went through several articles that describe connecting the two routers through a LAN cable. However is there a way to do the same without using a cable of any sorts?
View 1 Replies View RelatedI have a D-Link Router and I need to find the WEP number. How do I find it on my Router?
View 1 Replies View Relatedhow i can configure dlink dl624
View 1 Replies View RelatedI've been using DIR-600 wireless router since an year. But, after having a factory reset i'm having a strange issue. When i'm configuring the router in the Dlink page(192.168.0.1 now i changed it to 192.168.1.100).. In that i go to Manual Internet Configuration>> then i select Static IP(Since i've been provided a static IP,gateway, DNS settings by my ISP) As soon as enter IP: 192.168.1.2,, and Subnet 255.255.255.0,,,Gateway : 192.168.1.1 and enter DNS details and press SAVE.. I get a message " Invalid IP Address".. I've set the Router IP as 192.168.1.100 and DHCP range : 3 to 199I don't know why is this happening.. I'm not able to connect to internet now from the router.
View 5 Replies View Relatedmy internet has been acting slow, i have a dlink router 615 and high speed comcast internet
View 4 Replies View RelatedRecently the router has been dropping the wireless connection, and now is not connecting with the computer - the ethernet still works. It was suggested to upgrade the firmware but I can't access the configuration.I've tried admin, and blank password which is supposed to be the default. I've also tried XXXXX as password, and another username and password in case I had altered it for security.It doesn't allow me in.
View 13 Replies View RelatedI tested my network throughput speed and it's pitiful. 11Mbit/s or 1450 KB/s! I am running the test from two wireless machines connected via a wireless N router(DLink DIR-655). Both are in good range.I am using the Microsoft NTttcp tool to test my network throughput.
View 3 Replies View Related