For some reason my wife's laptop has lost its connection to my router and when I put in what has always been my security key it gives me an error message saying that it has to be such and such for WEP ?I logged into the D-Link router but could not locate the place where the security key is set. Any way to that part of the firmware so I can reset the security key.
View 1 RepliesFor reasons that are slowly pushing me over the edge of insanity, I have to reset this dumb router!!
I press the stupid little button on the back of it, the lights go out, one amber one comes on etc. etc. but when I go to 192.168.0.1, everything is still the same!!
Like the passwords are still there and nothing has changed! I thought resetting it was supposed to wipe all that stuff out so you could start from scratch? Also pulled the power cord in and out a zillion times but no way it will reset!
As an aside, I am having no end of problems getting my iPads (2) and iPhones (2) to connect to the wireless network! The "Network Discovery" button will not stay checked and though I have done all the Googling and been into Services to start things running, no way it is going to work!
But I digress, how do I get this fool of a router to reset properly?
I reset the router and now it doesn't have a default gateway address. It stops on the check for network status when trying the install wizard and says it can't install it.
View 2 Replies View RelatedI need to reset my DLink wireless modem all over again, can't get it to recognise the router, so thought that it would need to reset to factory defaut, how can I do this. Tried just hitting reset on the router,but nothing is happening.
View 4 Replies View Relatedi don't know the ip address of my DP-301p+ print server. how can i reset it to default ip address
View 1 Replies View RelatedI have a dlink(wireless n-300) router going through a netgear wireless g router, i have an intel wifi link 5100 agn in my acer aspire 6930g laptop & the isp is high speed cable (Shaw cable). My question is, why does my computer have to reset the router every minute or so? It takes forever to get anything on the web which could be Bitdefender 2012 plus security?
View 1 Replies View Relatedmy dir615 is unsecured how do i make it secure
View 1 Replies View RelatedWhere do I find the security key for this DIR-827 dlink
View 2 Replies View RelatedJust began using my DIR 615 D Link for the 1st time in 5 years.My lap top is asking for a security code.
View 1 Replies View RelatedHow to enable security mode on DLINK wireless router DIR-615, after having it installed in "unsercured mode"?
View 1 Replies View RelatedHow do I enable the Security Mode on a Dling 615 wireless router?
View 1 Replies View RelatedHow do I find the security codes to enable me to connect to the internet wireless
View 2 Replies View RelatedHow do I retrieve my d-link network security key?
View 1 Replies View RelatedWhat is the best security setup for this model!
View 1 Replies View Relatedhow to change security settings so my kids can go online on their nintendo ds lite. we have d link router. 192.168.0.1
View 1 Replies View RelatedHave D-link N150 wireless router as access point working with D-link DLG4100 wired router Forgot password for N150. How to find or reset it?
View 1 Replies View Relatedtrying to reset my security password- and same problem as listed- tried using admin for admin and password for password at 192.168.1.1, but seem to have locked myself out.
View 1 Replies View RelatedI would like to give selected friends and family access through Wi-fi to our home network (Vista windows) however I cannot or do not have the network security id written down anywhere and it is blocked from my viewing when I go to the Control Panel, Network Security page "Network Security Key". How might I reset this security password? And if I do, is this the password a friend would use to gain access to my network?
View 2 Replies View RelatedSo I decided to reset a wifi router, I have done this many times before and each time the process was quite smooth. But those routers were different models.This particular one is quite something. I reset it and when I tried to connect back to the network it asked me for a security key! I have tried everything from admin, password, 12345, the old passwords it had.. nothing seems to work.It gives a 'limited connectivity' message and the diagnosis tool asks whether the security key is correct. And it only accepts five characters (alphanumeric)So obviously I cannot try the default IP in the browser to access its settings, I can't even connect to the router.Are there known routers that ask for a security key even after resetting?
View 4 Replies View RelatedHow to set upo configuration & Security after reset
View 2 Replies View RelatedAfter some electrical issues at my home today (11/14/12) the security on my wireless router (medialink) disappeared. Not sure how to reset.
View 2 Replies View RelatedHow to reset the admin password on a tumbleweed appliance. My company just purchased a building, and the previous tenant left behind a bunch of equipment.
View 4 Replies View RelatedI had to reset and reboot. I entered the router ISP and went through the 4 step process then rebooted.
My question/problem is now the router is wide open. How do I find page where I can enable the security settings and lock down the router to the outside world?
I forgot my password to my Belkin 54g wireless router. How do I reset the password or recover the original one?
View 5 Replies View RelatedI was in the Wireless tab>Basic Wireless Settings and then I clicked the "Reset Security" button. I don't know what that did but I've been completely shut out of my connection ever since and I don't know how to fix it. I tried doing the install sequence of the router just now (Clone MAC address, then release and renew DHCP, power cycle modem, router, and PC) but it still didn't work.
View 1 Replies View RelatedI have been putting up with rubbish wireless signal down one end of my house now for quite some time. So I thought I have a spare wireless router and I could put it down there but I am sure ts not as easy as just plugging it and away you go.
Network Setup
Router 1 is a D-Link DIR-655
Router 2 is a D-Link DI-524
I need to know how to setup Router 2 so it basically become just a wireless access point
Does any know what " Last reset from system-reset " means? Is this becouse of a power failure or someone reloading the switch?
View 3 Replies View RelatedI have the WAP11 serial number G3110320414 that does not have a reset switch in the back. How do I get back to factory settings?
View 3 Replies View RelatedI have a Linksys WRT610N wireless system with WPA-PSK security and this works fine with several computers but now one computer detects the wireless security as WEP and can thus not connect to the router. I have tried to manually connect to the router with correct security WPA-Personal (TKIP) and correct password but then the computer says "settings saved on this computer for the network do not match the requirements of the network".How can I get the computer to detect the correct security? The computer is running Windows 7 home premium.
View 7 Replies View RelatedIs it true that the FCC is investigating the Pogo game site because of poor security? Is Java the cause of this problem?I'm very leery of getting on the Pogo site because I've been told that my computer could get a virus and crash.
View 1 Replies View RelatedI'm studying for CCNA Sec exam and looking for any security labs for GNS3 or Packet Tracer.
View 3 Replies View RelatedI'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
My company ordered NAC and ACS 1120 My question is Can i configure 802.1X security through ACS server and NAC in layer 2 Inband Virtual Gateway.for campus switches.Is it the good design to have double security for switch ports. 1st is 802.1X and 2nd is NAC in layer 2 INBAND VG?
View 1 Replies View Related