Ps3 Shows A Message Saying 8003121
Apr 21, 2011my ps3 shows a message saying 8003121 what time round about is it gunner be fixed
View 1 Repliesmy ps3 shows a message saying 8003121 what time round about is it gunner be fixed
View 1 RepliesI am having a problem with my cisco 3660 router. I have installed a wic 2T interface card and every time i set it to "no shutdown" the interface always went down and keep getting the following message " %FECPM-2-SCCFAIL: Init of SCC2 for int 0/0 failed to do fecpm_dma_init" .
View 2 Replies View RelatedLaptop connects to wifi network. But it shows "No Internet Access" message.My Macbook connects to the internet just fine and the wifi on my iphone works as well.The ethernet on the laptop works and I am able to access the internet this way. The laptop does connect to some of the other access points but I've had issues with my router.I tried the usual debugging mechanisms - disable/enable adapter, reset the router, reset the tcp/ip stack. [code]
View 1 Replies View RelatedI have faced some problem with Cisco 1520 Series APs. Since few days, We got the log in wlc 5508 like this
"AP 'MAPNSY#WMI3', MAC: ac:a0:16:5c:45:00 disassociated previously due to AP Reset. Uptime: 0 days, 00 h 22 m 52 s . Last reset reason: operator changed 11g mode."
& then AP is rebooted. Here, I attached the screenshot of WLC 5508 Log.
I have a Cisco 2800 series and it doesn't boot, only shows this message in the CLI>
Bad RAM at location 0xA0000304: wrote 0xA0000304, read 0xA0000004
What means this? I have to change the RAM?
I have Nexus 7K installations in 2 locations. Both of them have multiple VDCs. In default VDC there are continous tacacs error message though tacacs is not configured. The requests are from various public IPs where thsi VDC is not exposed to Internet at all. What would be t he cause of it?
%AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication failed for user root from 195.2.219.2
2012 Dec 11 16:25:28 IDC-FBDTB-AMR2-CN7K-01 %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication failed for user nagios from 67.78.206.226
- sshd[25797]
2012 Dec 11 16:25:34 IDC-FBDTB-AMR2-CN7K-01 %AUTHPRIV-3-SYSTEM_MSG: pam_aaa:Authentication failed for user nagios from 67.78.206.226
- sshd[25799]
[code]....
I Have asa 5520 with the code 8.0, the mem shows 94% and the CPU shows 85%
View 5 Replies View RelatedI have a Windows 7 Laptop which has got a red X on the connectivity icon even when connected, and this since april. Now, I don't have any idea of what caused it. I have Tunngle installed, but i don't think that's the problem. I also have updated my internet drivers, but without success. In the network boards i also have a weird second wireless connection which is called "Microsoft Virtual WiFi Miniport Adapter #6"
View 5 Replies View RelatedI updated the firmware of my DIR601 to 1.02NA, it now only show NA under status for WAN, even though its connected (PPPoE). It worked with 1.01NA. I tried rebooting the router but no effect
View 1 Replies View RelatedMy HP Envy 14 has an Intel 6200AGN wireless card. Is it not good enough to achieve 300mbps on my D-Link DIR-655? The firmware is current on the router and the signal is 100% almost every where in my home. Even when I'm a few feet away from the router, the most I'm able to get is 130.Do I need to change a setting on the router or upgrade the wireless card?
View 2 Replies View Relatednslookup shows all ip addresses of a nic. is this expected? i think it should just show the default IP
View 3 Replies View RelatedI just downloaded TV show Downton Abbey from iTunes, and I know from somewhere that it has so called DRM protection, but I am trying to move it to Surface RT. What should I do to make it happen?
View 1 Replies View RelatedThe route is connected to that. Wirelessly, there are two laptops and sometimes an iPad and sometimes a Wii. Verizon DSL. I barely use my laptop during the week, but did notice some connection issues maybe Thursday and Friday nights. All day yesterday and today, as well. I will have a connection for maybe 5 minutes and then get errors loading webpages (and/or videos stopped). I will repair the connection and it will say everything is fine but it will not work, repair again or disconnect/reconnect(sometimes, several times) and then it works for 5 minutes or 20 minutes before the same thing happens. The other laptop is having the same problems. What I have tried so far: restarting the PC, both laptops, the router, and the modem. Resetting the modem. I have not moved any furniture or anything that would cause interference. I am worried because I have been trying to make more money and started at this site called Treasure Trooper which seemed okay-surveys and the like. There were a few pay-to-download things I downloaded but did not run. Avira found a trojan and I deleted it (not sure if the two are related, but I can not think of anything else I have downloaded or installed in the past month or so).The old PC is off; the Wii is on but probably only maintains a small connection. The iPad and other laptop are not mine, but if either is on, they probably have little to no activity right now since the user is away.
View 1 Replies View Relatedtrying to network 2 desktops running xp.
View 14 Replies View RelatedMy Acer One Aspire wireless connection shows connected but I cant get any Firefox browser to work.
I have a D-link DIR-825 router and it has worked every time except today. I havent used my Netbook very much at home though, maybe a few times a year as I usually take it with me on trips.
I attempted to narrow down the problem. I called D-link as my router was still under warranty. They advised clearing all my old connections and rebooting but I got the same problem. I told them my Sony PS3 works, so they suggested I contact Acer as they think it is not the router. My direct hardwire connection also works.
I then took my Netbook to Best Buy and it worked there. The guy said they can pay a visit to my house as it is probably interference of some sort. This will cost $100. Why would my PS3 work if it was interference? Maybe it�s the proximity of my Netbook to something, but I tried it near my PS3 and it still had the same problem.
Id rather try to solve the problem myself first. I havent changed anything except a modem and Windows 7 updates.
We have a fairly new Asus laptop and for some reason we can't get the wireless to turn on any more.It has a Function button method to turn it on and off and any time you use this button it shows the WLAN simple with a red line through it. No matter how many times you press it it does the same thing.I've tried uninstalling the drivers and reinstalling, ran a security update for the drivers. When I go into the wireless connection and try and turn it on it shows that it has a signal (not sure what to) but a red X next to the connection in windows 7. I can't actually see any wireless signals so I'm kind of at a loss.
View 5 Replies View RelatedI have a laptop that I usually use physically connected to my router, but sometimes I use it wirelessly when I want to lie down in bed.After using it wirelessly yesterday for about an hour,I brought it back to where I normally connect it with an ethernet cable but not I can't access the internet even with the ethernet cable plugged in! And wireless doesn't work either,I have "Limited or no Connectivity" for my LAN Connection and Wireless. I cannot afford a new computer (and I also doubt I need a new one).
View 6 Replies View RelatedIn my LAN one computer shows limited connectivity
View 1 Replies View RelatedMy church has a AT&T wired modem and a Netgear Wireless router. Pastors office is on other side of church and he is losing signal occassionally. His network is showing two SSID addressed cgcg cgcg2
View 4 Replies View RelatedI have a wireless router. The first time I connected my computer to it, it worked. I went in to change the network password, and after that, it stopped working. Every single other device I have will connect, including other laptops, but this one won't. In the network and sharing center it shows that my network is available, but it will not connect. I have tried everything I can think of. I have looked all over the internet, nd still can't figure it out!!!! My computer's wifi IS on so its not that. The only thing that the trouble shooter tells me to do is unplug the router and restart it and that has not worked after several tries. Also is there a way to reset the computers recognition of networks? Im wondering if that would work if I could completely restart the process again, but I dont know how to get to that. I have a dell inspiron with windows 7.
View 1 Replies View Relatedas gone all of a sudden. Checked cables, restarted both router and PC, and even rang provider with questions.. Router seems to be working fine as laptop and iphone both got internet access with the same router. The Local area connection icon showed limited on no connectivity snd so the provider renewed the IP manually and local area connection says its connected now but there is no internet access.. They suggest it could be something to do with firewall or something else blocking it but as far as I am concerned I did not make any changes to the pc the night before when it was actually proper connected.. The desktop pc is running windows XP and I tried downloading ethernet controller driver from the web and upgrading it but it did not improve the situation.
View 17 Replies View RelatedAfter Irene, we kept power and cable, but our internet went down, or so we thoughtWhen we plug the Ethernet cable from the modem into the computer, internet works fine (I can post this, after all), but when we plug the cable from the modem into our Dell TrueMobile 2300 router, our network appears as "Local Only." The phone cable thing is plugged from the wall into the modem, and the ethernet cable goes from the modem to the router, as it has been for years.
View 7 Replies View RelatedRecently I purchased AIR-WLC2112-K9, but when I logged in I saw that system shows only 6 APs supported (I made print screen in addition). I'm running IOS v. 7.0.116.0 and I saw that there was some problems with earlier versions of IOS, but not this one.
View 5 Replies View RelatedWe are currently trying to installed LMS 4.0 on a VM Ware instance of Windows 2008r2, and getting the error "cannot run name lookup" message when launching the installation. We are launching the Win2008 patch and it asks for the desination of the LMS application then spits out this message.
View 10 Replies View RelatedOne of our office´s PC is connected to the network and shows 2 networks, but we have only one modem and one router....and no internet access only in that computer. I had restarted, disconnected, shut down and nothing.....what can I do? I also connected it to another cable form other computer working correctly and didn´t work.
View 4 Replies View RelatedI have a Vaio laptop that shows full bars connection to my Belkin_Enhanced_E98E8F modem but when I try to connect them it tells me "the wireless security key is not correct". Well, i know for a fact it IS correct.
View 1 Replies View RelatedHow to host my website from home? So I am half way through this process. I have created a domain name [URL] I have used zoneedit's free DNS server as I cant be bothered setting one up for what I want to do. Now I have my external ip "eg.eg.eg.eg" which i entered into the configuration on zoneedit. I then typed www.mydomainname.net.au into google chrome and I am prompted for my Thompson gateway (my modem/Router) username and password. This I enter and i find my self being able to configure the settings for my router over the internet from my domain name....this makes me go huh? I also tryed using the free dyndns.org with exactly the same results. I have no idea what I am supposed to do next anyway. Btw the website I am trying to host is a Joomla 1.6.3 so I would need to run a WAMP Server as well, but if I have troubles with that I can ask the Joomla Forums.So my main question is what on earth do I do now. Perhaps I need to do something with the ports or settings in my router, and where do I even put the files for the wesite and I do not mean to insult anyone I just don't want to be plainly stating my external ip on the web (i know it is visible on any website i go to) whilst it is linked to my router settings.
View 1 Replies View RelatedDo I have a virus my when I try to get on the internet at home is wont allow me in, it keeps popping "not working at time" my wireless is good. what can i do?
View 1 Replies View RelatedWhat you can try:Diagnose Connection Problems,This is what is displayed evry third or fourth page when I surf...I could just be finishing a survey and bam this pops up and when you have 56 K dial up and your computer is already slow, you dont need this slowing you down....what can I do ? I am afraid to do my online banking....
View 11 Replies View RelatedI see some other threads about this same thing but I wanted to start my own to keep track if what I did. I know zilch about computers.I have an ACER I got less than a month ago. I have Verizon mifi. Windows 7My comptuer says I am connected but it says no internet access. The wifi works fine on my old netbook though. I keep getting error 105 Unable to resolve the server's DNS address. What do I do?
View 1 Replies View RelatedMy Hp laptop does not shows the wireless adapter in my network and sharing folder how can i fix it? i cannot connect on my wifi because of it .
View 1 Replies View Relatedmy laptop shows connected to the router however no internet; other mobile devices connect and show internet
View 1 Replies View RelatedI have 2 laptops, a DELL (windows XP home) and a Toshiba (windows 7).i suddenly couldn't get online with my Toshiba a week ago. Looks like I'm connected, but just can't send out. I changed to the DELL and all was fine for days, then I suddenly couldn't send out for a website with this, either. My connection shows strong, and can receive, but can't send out. This is a secure network (supposedly). I've rebooted, and have internet phone that works, so it's not the modem.
View 5 Replies View Related