LAN One Computer Shows Limited Connectivity?
Jan 17, 2013In my LAN one computer shows limited connectivity
View 1 RepliesIn my LAN one computer shows limited connectivity
View 1 RepliesI have a laptop that I usually use physically connected to my router, but sometimes I use it wirelessly when I want to lie down in bed.After using it wirelessly yesterday for about an hour,I brought it back to where I normally connect it with an ethernet cable but not I can't access the internet even with the ethernet cable plugged in! And wireless doesn't work either,I have "Limited or no Connectivity" for my LAN Connection and Wireless. I cannot afford a new computer (and I also doubt I need a new one).
View 6 Replies View RelatedMy computer constantly goes to 'limited connectivity', for no reason. Everyone else's computer is fine, it's just mine. I have to restart the wireless access point router to get it to connect again, even though everyone else connected to the AP can access the internet. Even restarting my computer doesn't fix it. It's like the access point and my computer just don't like each other!
View 6 Replies View RelatedIn my LAN one of my computer is shown limited connectivity
View 1 Replies View RelatedSo, I reformatted using an old XP disc, Got the Ethernet Driver set up fine, but now I can not connect to the Internet, because the card refuses to fetch the DNS Addie, and default gateway, it's the only computer in the house having issues, the computer I am having problems on is an old Hp Dv 9317cl series, with a nivida chipset Ether card.
View 3 Replies View RelatedMy network shows no access and the specific connection says "limited access".
View 2 Replies View RelatedI have been having some gripes with the above problem for the past few days, connecting several PCs in my office into a network. To cut a long story short, it's a bunch of XP SP2 and SP3 machines with only some of them having these issues. The network consists of two switches and one router with integrated modem and wireless. Internet access is established over that router/ ADSL modem.I have drawn out all the cabling and made all the connections myself, I don't doubt network related hardware one bit. Basically, I had the problem on two PCs, I tested connectivity on that cable with a laptop which didn't have any problems connecting to the network. All the cables are brand new, "straight" connectedC
View 14 Replies View Relatedi did this and the sign of unable to connect went away, restarted back to it, did it again and it goes away but still no connection. TCP/IP stack repair options for use with Windows XP with SP2.
View 8 Replies View Relatedmy internet is not working on my PC (XP) however the wifi in my house is still on (i can use laptop with functioning internet). The internet status say's "limited or no connectivity" and shows a yellow triangle with an exclamation point in the middle.
View 19 Replies View RelatedI manage a small office network IP's are generated via a rooter. I need to add a new pc to the network and here is where the problem starts.I have a cable from a HUB in that office which has a splitter 1 way goes to a PC the other is empty. At first i tried connecting the other PC from that splitter but i get the Limited or no Connectivity message on both PCs. If i connect only one of them to the splitter the connection works fine.Now i tried with a HUB, made a Crossover cable from the splitter to the HUB in the WAN port, same deal both PCs get Limited ot no Connectivity. THe strange thing is that if i connect only one via the HUB the same thing happens.I am really out of ideas, my only option left is to connect the PC from the main HUB which means allot of cable posing.
View 3 Replies View RelatedWhen using an Ethernet cord, I have no problems connecting to the internet. Also, my iPhone and my Wii have no problems connecting (wirelessly). However, I can't get any laptops to connect to my wireless. I have tried three different laptops and get the same problem, that it can connect to the network but limited or no connectivity.
View 1 Replies View RelatedI have a spare computer I build. Its a FX-60 on some old asus 939 motherboard. I installed xp in it because I don't have any wireless network adapters that work with linux or Windows 7.I am using an old Linksys WUSB11 Ver 2.6. USB adapter.The computer does have connectivity if I plug in an ethernet cord from the router. Worked fine, fast, was able to install Sp3, etc.I can't get the wireless to work. I get excellent connection strength, but can't actually do anything with it.Since this is XP and I haven't messed around with XP network settings for years, I think I got a bit rusty and spoiled with Windows 7.
View 6 Replies View RelatedLimited OR No Connectivity.
View 1 Replies View Relatedused to use Ethernet connection on this pc for 2/3 years, i recently ran wireless for like 2months. every time i try and use Ethernet i get limited or no connectivity warning, I looked in my ipconfig, i notice theres no physical address or default gateway for my realtek rtl8139/810x family fast Ethernet.
View 4 Replies View RelatedI got the urge to play a Windows game, so I used my restore disks to install XP on my Acer Aspire One A150. Unfortunately, my wireless card does not work anymore (?). I am dual-booting with Ubuntu 10.10 at the moment and my wireless card works there with no problem.I get a Limited or No Connectivity error every time.I'm connected to a router, which I have reset and works okay in Linux. I am connected currently using a USB D-Link N-Adapter, however, despite being "N" is considerably slower and inconvenient.
[code]...
I just installed a new NIC after troubleshooting old NIC and I am still receiving limited or no connectivity error. I checked router, cable modem & cable; all work fine.
View 13 Replies View RelatedI got this message and I went up to the " Start-Run_CMD-IPCONFIG and this is what I got Ethernet adapter Local Area Connection Media State....... Media Disconnected,Ethernet adapter Wireless Network Connection
View 1 Replies View RelatedI've searched the forums and found similar problems that relate to mine but after trying done of their solutions with no success I decided to make a new thread. This problem started 2 days ago with the same network I've been using for about 2 months.I'm running vista sp 1. I use google chrome and when I try to open a page it says unable to connect to proxy server. I changed the lan setting s (unchecked the box for using a proxy server for my lan) and now the page says the dns lookup failed.
View 1 Replies View RelatedI have a laptop running XP that will connect to the router wirelessly but not the internet. We have a static/fixed IP that I think may be the problem. Im not sure what the IP address is. Do I need to manually enter this (and DNS settings) into wireless connections > properties > TCP/IP, Microsoft Windows XP [Version 5.1.2600] (C) Copyright 1985-2001 Microsoft Corp.
View 9 Replies View RelatedI usually bring my laptop to classes to do homework during my free period and it connects through ethernet no problem. Today, randomly it says theres limited connectoin (no internet connection), but there's numerous other people here with laptops who are connected through the ethernet or wireless network, and their having no problems. I've already tried shutting my computer down and that didn't work, and since this is a school, the internet connection has to be steady, etc. What can I do to fix this?Some details about the laptop[CODE]
View 7 Replies View RelatedMy desktop PC ran Vista Home Premium and about over a year ago, suddenly developed the dreaded, 'Limited Availability' connection error when I tried to connect via ethernet cable to my D-Link dir 615 router.I have tried all possibilities (detailed in the other forums I have posted this issue in), like all the ipconfig commands in the CMD prompt, rebooted modem and router and pc but still getting this issue. [codde] As you can see - the Belkin wifi dongle connects fine, with an IP address of 192.168.0.101, however, the SiS191 ethernet controller (which has current and up to date drivers) refuses to connect and gives an IP of 169.254.241.0.I have also tried copying the settings from the wifi dongle and manually entering them for the ethernet connection but this also does not work..I don't think its an issue with my router as I also have a laptop, connected via ethernet, which works fine. Also have 2 iPhones, 1 iPod, 1 iPad, Xbox and Wii which ALL connect to the same router (via wifi) without any issues.
View 5 Replies View RelatedWe had a lightning strike near the house and it fried my NIC card (or so I thought), also my power strip. I replace them both along with my Ethernet cables. My internet intermittently goes out, every couple of minutes. I keep getting pop ups saying "Local Are Connection has limited to no connectivity" and/or "a network cable is unplugged".
View 5 Replies View RelatedWe have netgear router and 3 laptops which were all working on the internet fine but one laptop has had a full recovery done on it and now won't connect it just says there is limited connectivity, what it could be as the net is still working through Ethernet and the other laptops through wireless. Its windows vista.
View 5 Replies View RelatedOkay so I have a dual boot computer(windows xp3 and Linux Ubuntu). The Ubuntu wireless works so that means my hardware actually works, but my windows xp doesn't connect. First I have the xp3 so my recovery disk from Toshiba some of the stuff is outdated. I installed intel chip-set, intel proset(my wireless) , wireless LAN, oh the stuff that have to do with wireless and still doesn't work. This is what happens, proset finds the router tries to connect and it says limited. I tried repairing it but nothing works. P.S. the stuff that are outdated are like the QFE ( those are a lot of files in my Toshiba recovery and every time i try to install them they don't work they say that the system I am using is better than the stuff i am trying to install)(QFE is also just the name in front of the file and there is at least 25+ , don't know why it is QFE)
View 3 Replies View RelatedI recently moved into a new apartment and when I connect to the router using the wireless. I get limited connectivity, it accepts the security key but can not get the internet. Connect wirelessly to another router within range and can connect to the internet via that. Also if I connect a ethernet cable to the router it gives me internet access. I couldn't see any settings in the routers menu that would prevent me from connecting(but im probably being blind).
Two other guys I'm sharing the apartment with can connect to the internet wirelessly with no issues. The router is a Thomson TWG870UIR.
Windows Vista Ultimate OS.
Connection-specific DNS Suffix:
Description: Intel(R) Wireless WiFi Link 4965AGN
Physical Address: 00-13-E8-0D-82-4D[code].....
I am trying to share my internet conncetion with another computer. I am using a d-link switch. but I keep getting a limited or no connectivity message.
View 10 Replies View RelatedI have a couple of laptops on my home network and yesterday one of them stopped connecting to the internet. I was having some trouble with my sound cards and when I tried to automatically update the drivers my network connection cut out and now I cant get it to work correctly. All of the other laptops work fine.So initially I thought it was malware so I ran hijack this but i didnt see anything suspicious. I can see in ipconfig /all that the ip address subnet and default gateway are correct and I have the same DNS servers as the laptops that work fine. I can ping my router and the DNS server but not any of the laptops on my network or any external IP address.
View 4 Replies View Relatedrecently my internet connection shows the status i mentioned.in cmd ,typed Ipconfig/all and all ip are 0.0.0.0, I Tried to renew the ip by ipconfig /renew it tells THE RPC SERVER IS UNAVAILABLE.and also tried to start DHCP CLIENT in services.msc and got ERROR 1068 : the depency service or group failed to start.
View 14 Replies View Relatedi have a windows 7 laptop that ive just recently purchased. The wireless Connectivity was working fine last week, now suddenly it just wont work. I believe that its due to a program i recently installed that goes by the name of Connectify. I have uninstalled it yet still whenever i try connecting to any router wirelessly, the PC displays limited or no connectivity. On the other hand When i connect my laptop to a router via an Ethernet cable everything is fine. In case you are wondering, im currently using a 3g usb wireless stick to surf the internet, but i dont want to use it as i already have a router to use.
View 14 Replies View RelatedI recently switched my laptop over from XP to Vista Home Basic and since then I have not been able to connect to the wireless network at my parents' home. The strange thing is that I've had no problem connecting to other wireless networks (at my own home, at work, etc). n their network, I get a message that says "taking longer than usual to connect to network". Then, it eventually connects but leaves me with "limited connectivity"....and I can't access the internet.I had no problem connecting to their network on that laptop when I had XP and no other computers are having this problem with their network.
View 4 Replies View RelatedSince I came back from vacation I've been having a problem with my wireless card. It seems that at random times my connection will go to limited connectivity, very rarely it will fix itself quickly, but the only real way to fix this is to restart the computer.
I thought it could be something to do with the router or the fact it was downstairs, but we recently changed provider and got a brand new one and it now sits in the same room as me and my laptop. Still have the same problem. And I'd already tried changing the router's channel and frequency and had no luck.I saw on another thread that the ipconfig /all was requested, so here it is:
Windows IP Configuration
Host Name . . . . . . . . . . . . : lesleycheese-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) PRO/Wireless 3945ABG Network Con
nection
Physical Address. . . . . . . . . : 00-1B-77-00-B8-53[code].......
I've downloaded the file "RV0XX-v4.1.0.02-tm.bin" from Cisco's web site. The current firmware in the RV016 router is V3. I log into the router with IE9 (or even firefox), navigate to the system management section, upgrade firmware tab. Browse to the file above and click the button to upgrade. Nothing happens for a few seconds, then the browser displays cant load this page. (Same results if I use the file "RV0XX-v4.1.1.01-sp.bin" as well.)
View 1 Replies View Relatedit is all about I P address, which is conflict to another computer I P address. so, there is an icon appearing that is no connection limited connectivity.
View 2 Replies View Related