Wireless :: Xbox Connects To The Network But Not The Internet?
Feb 3, 2011Xbox connects to the network but not the internet what should i do?
View 4 RepliesXbox connects to the network but not the internet what should i do?
View 4 RepliesI'm using a wireless adapter with my xbox because for some unexplainable answer the wired ethernet port quit working, but when my dad uses the internet on his wired pc I get booted off xbox
View 1 Replies View RelatedMy laptop is able to connect to the wireless router in my home, but the browser will never load a page, status is shown "connected". However, when I try on other laptops, they are able to surf the net. I have tried using my laptop at my friend's place with a different wireless router and it works at his place as I was able to surf the internet through my wireless! So, I've tried resetting my personal modem to factory default and it still doesn't work!
View 2 Replies View RelatedI have a compaq presario that will connect to my wireless network but when i open internet explorer or mozilla firefox the page will not load and says that the server cannot be found. i don't think the router is the problem since i have a separate computer that connects just fine wirelessly and a ps3 that connects to the internet just fine. the only way i have been able to access the internet with the compaq is plugging it into the modem with the ethernet cable but i want to connect wirelessly.
View 2 Replies View Relatedmy vista machine connected to the internet. My PC, a Dell studio 540, worked perfectly well on the BT Homehub2 in our last house but now I have very infrequent access.The wireless adapter connects to the network but not to the internet. I get a 'Identifying public network' message with (no customise option). When I use LAN to connect 'unidentified network'.it will connect via wireless, but it seems random and then if the machine sleeps or is restarted it's back to square one.
[code]...
So have got fibre optic broadband which meant installing new network and wired/wireless router. Everything working fine except on one (vista) laptop which connects wirelessly but cannot get past the router to the network.
View 5 Replies View Relatedcan connect to the network but not the internet. In IPCONFIG it says media is disconnected. In properties it says adapter is not connected. But I can see the network, I can ping every computer on the network, just can't get to the internet.Reinstalled all the drivers, tried renew, netsh commands, flushdns, disabled & reenabled. 2 other computers connect to the internet and each other with no problem. Can connect to other WI Fi's too, but still no internet access.
View 8 Replies View RelatedTitle basically sums it up. Whenever my laptop connects to the wireless network in my house, it becomes unusable since nothing can no longer load. I have done a full virus scan and all, found no viruses, adware, spamware, etc. I also downloaded a program to check what programs are using bandwidth but nothing seemed out of the ordinary or enough to completely stop the Internet
View 1 Replies View RelatedI have a Windows 7 computer that was built by ibuypower. It's great, but I ordered a rosewill wireless adapter for it and noticed that my connection strength and speed are both pretty terrible. I went on amazon and bought a TP-Link wireless adapter(TL-WN822N). I installed the most recent "V2" drivers from their website and upon disabling my rosewill adapter and enabling the new TP-Link adapter, I was able to connect to the network, but not access the internet. I have tried power cycling the router, using the reset switch on the router, restarting my computer, and a bunch of commands that I found on this site. Is it possible that I have a defective adapter?
Also, some more information: My isp is comcast and the router is from them as well. Here is my ipconfig /all log for the rosewill adapter(internet access):
Quote:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Trauma
[Code]......
My Compaq C700 laptop connects to my wireless network but I can't get on the internet. How do I fix it?
View 8 Replies View RelatedJust set upa new e1200 on my brand new primary PC - connects flawlessly. One other PC in the house and an iphone also connect on the network to the internet with no issues. The problem: My laptop connects to the secure network without prompting for a password,but then does not connect to the internet at all. This same laptop easily connects to the internet via the network as a guest, just as it should. Tried using Easkey, but same result: laptop connects OK to the secure network without a password prompt, but then does not connect to the net.
View 5 Replies View RelatedI'm having trouble connecting my 360 to the wireless router to gain Internet access.I use my phone's Wi-Fi to gain internet access with NO issues. My current setup: NetGear Wireless router is connected to my D-Link wired router, and I can access the internet no problem. (10 MBPS down, 5MBPS up)When I try to connect the 360 to the Netgear Wireless router, it connects to the Network, but Internet test it reads "DNS error - The router or modem may mot be automatically providing DNS settings. Try a manual DNS setting instead."(Next suggestion) "DNS Error - If you have a PC that can successfully browse the web, check it's network properties to find the DNS address it uses..."Now, I have XBMC running on my computer, and the 360 can access the network so it shows up under Video Apps so I can see a file list to stream movies. When I try to run a movie, it says I must download an update - so I can't watch the movies at all.I juso set it up so I can access the Network AND Internet.Again, Netgear wireless router (which 360 connects to) connected to D-Link wired router.
View 10 Replies View RelatedI have an E4200, and upgraded to Connect Cloud. It was buggy, and so I downgraded to the firmware before that. I have all the computers working fine in the house except my desktop. it connects fine to the network, can see the other computers on the network, can even do a windows update. But when I go to use google chrome or internet explorer it just wont access the internet. It doesn't seem to work either if it is a wired connection, or a wireless connection It was fine before the upgrade and subsequent downgrade. It was on this desktop that i installed and uninstalled thew Connection cloud. I know enough to set up the network but when it doesn't work
View 4 Replies View RelatedI have an E900 I replaced an old Airport Extreme with. The reason was for increased download speed. The Apple router I used saw my work network and I could access files and printers; no changes to my Mac were necessary. It worked out of the box. The new Linksys has Internet connectivity but will not see my work network at all. I have looked into the old settings and cannot figure out how to make the new router see my network. I called Linksys but no dice. What settings need to be changed to see the work network? It is connected to the same ethernet cable as the other router that worked fine.
View 1 Replies View RelatedCumputer connects to network but not to internet. I've tried wired & wireless and get the same results. I get an error message that there is a problem with the bridge adapter
View 1 Replies View RelatedI am running a VPN server on my desktop at home, with all the default settings, and i checked the box that allows clients to connect over the internet. this is win7 x64 computer. I opened up port 1723 with PPTP protocol on my E4200 router.On the client i am running win7 x64 as well. I am able to connect to the vpn, from another internet connection, but there is no local network acess. It says the status is No Internet Access. and the IP that is assigned is the 169.x.x.x one that windows defaults when it doesnt find a dhcp server.How can i get the client to connect with full local network access. Right now being connected to the vpn, it means nothing, i have no access other than being "connected".
View 1 Replies View RelatedWe have a fairly new (about two weeks) wirless network set up in our home consisting of a Netgear modem (with wifi, which I have disabled) connected to a Belkin N wireless router. Our ISP is Optus.
My laptop (which is running Windows Vista service Pack 2) was connecting fine since we set it up until about 2 nights ago. Since then, it has had trouble connecting to the network (windows tells me it's taking longer than usual) and when it finally does, I have limited or no connectivity.The internet works fine when the laptop is connected directly to the modem, and if I unplug the wire, it stays connected to the network wirelessly for several minutes before it drops the signal.
At first I thought it was because I was using the laptop at the back of the house (with the modem and router being at the front), perhaps the signal experiencing interference, but no matter where in the house I try to connect, it has problems.I also tried updating the drivers and uninstalling/reinstalling the drivers for the adapter in the laptop, with no luck.
P.S.
Xirrus pictures =
1. taken from the back of the house (not connected to the network) where the laptop is used a majority of the time. Although the strength isn't the best, there didn't seem to be any problems in the two weeks prior to this.
2. taken from the same room as the modem and router, connected to the network, but with "limited/no connectivity"
Command Prompt:
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig/all[code].....
It is a Satelite 733. Have pinged without any response however the wifi or hardwire will show connected to the local net.I have four other units surfing the web fine and wifi picks up ok except for one unit that my neighbor need will not connect no matter what. Have updated all the drivers, uninstalled and re-installed devices, reset ip, dumped the dns several times, etc.So here is the ipconfig stuff....ignore the cable connect I only have the wifi on at the moment. I have stared at this to the point where I know naathing .Is the tunnel adaptor the indication that the card is out? Oh and I tried taking out IPV 4 on both channels and nothing so I left one with 4 on and the other with it off just as something else to try. [code]
View 2 Replies View RelatedI have a wireless network set up in our small office. I just bought the DIR-655 and installed it (did have a very old Netgear router). I currently have two wireless printers, a MAC and a couple of iPhones that can connect to the network and internet. My desktop is plugged in and also connects fine.The BOSS just came in with his fairly new Win7 laptop and I connected it to the network, however, no matter what I try, it won't connnect to the internet. I can see his laptop in the network, it can see my computer and it says that it is connected to the network. It also says that it is not connected to the internet. I ran the troubleshooting (by clicking on the "X" between the network and the internet in the Network and Sharing Center) and it said it couldn't find the problem. The Win7 laptop has no problems connecting to the old network, nor any others that it encounters.
View 1 Replies View RelatedI am having a problem with my Inspiron 1525. It connects to my home wifi network, but doesn't connect to the internet. The Windows says there is a problem with the router, but my housemates have no problem getting into the internet with their Macbooks. I have tried resetting the router (numerous times) and disconnecting from my network and reconnecting, but it doesn't work.
View 10 Replies View RelatedI have a Dell XPS 8300 desktop and have been having issues with the modem connecting to the wireless network just fine but, I'm not able to access the internet. This has only occurred over the last 24 hours and is frustrating. I've read some other recent posts and have gone back and done the System Restore to before the installation of Windows Updates a day or so ago and that has worked twice today. But I'm not a PC expert and I would like to know how I could resolve this issue permanently without having to undo the updates with System Restore every time I power up and log in. How do I figure out what setting is being undone to disconnect the internet connection from my XPS 8300?
View 5 Replies View RelatedLaptop connects to wifi network. But it shows "No Internet Access" message.My Macbook connects to the internet just fine and the wifi on my iphone works as well.The ethernet on the laptop works and I am able to access the internet this way. The laptop does connect to some of the other access points but I've had issues with my router.I tried the usual debugging mechanisms - disable/enable adapter, reset the router, reset the tcp/ip stack. [code]
View 1 Replies View Relatedrecently I've connected to my OpenVPN and everything works fine on my PC I'm getting okay speeds and the VPN IP appears on [URL]The problem is I wanna use internet connection sharing to play Xbox Live while connected through my VPN and I'm having issues.My Xbox isn't even recognizing my wired connection.This is the setup:Wireless Connection > Desktop > OpenVPN > Wired connection from desktop to XboxWhat I think I'm doing wrong is not specifying the correct home networking connection for my LAN 3 (Tap-Win32 Adapter OAS)I tried sharing the LAN 3 connection and set the home networking connection to my Wireless and it disconnects me from my wireless network.
View 1 Replies View RelatedI have a compaq preario running on windows 7 ultimate.It has been working well with the internet connection but recently it stopped connecting to the internet.It recognizes other computers in the network but the internet connection is not available.
View 1 Replies View RelatedThe wireless internet keeps cutting out but only on my laptop,it cuts out and then connect again.I have downloaded drivers for my dell laptop but it hasn't solved the problem.I'm no whizkid at laptops and only got this laptop a few months ago, it's so annoying.I wish I had brought it back straight away.
View 1 Replies View RelatedI was installing a software on my other laptop (it had SQL software with it) and I ran into some trouble as I got error problems that the installation of the software had failed and now whatever I do, I can't access the web! Sure enough, my wireless connection connects successfully and it indicates that I am on the "Internet" but every time I try to use either firefox or internet explorer to go to a web site, it says I don't have a connection. It is extremely odd and I don't know what it might be
View 6 Replies View RelatedI am in Italy for the summer and brought a usb wireless antenna and have a good neighbor who has given me the password to his adsl router. I have a pc with xp pro and after installing the drivers, I get a very good signal and I get an IP and gateway address, windows shows i am connect but internet will not hook up. I have tried installand reinstalling the software, disable firewall and anti virus to no avail. worked on this for several days . Then I installed the software on my Asus ee net book that has xp home . It connected to internet right away.. I can work like this, but have all my software on the pc and would like to use it for the internet
View 1 Replies View Relatedadapter is not turned on . how do you do that?
View 1 Replies View RelatedI have an HP Pavilion laptop running vista.We got charter internet with a new Motorola wireless router.My laptop will connect to the router but not the internet. My wife's Sony Vaio, running vista, my son's mac, my android phone all connect fine. If I plug in a cable, I am on line, but not wireless.
View 1 Replies View RelatedMy xbox is connected by wired, my loptop is wireless, xbox will connect to the internet, but my computer does not see it in the network, media center does see it, but the xbox does not see the laptop?
View 1 Replies View RelatedI am not sure what the problem is but my laptop wont connect to the wireless in my office, it connects fine to my wireless network at home..
View 13 Replies View RelatedLast week I was using my laptop when suddenly it disconnected from the internet. I tried fixing it the next day, and even though there were full bars, it wouldn't connect to the network. I restarted my router multiple times and nothing. So, after a fit of anger and messing with different settings on my computer. For some reason, I was able to connect to the internet 2 or 3 times over the past week for about 10-15 minutes before it would disconnect me for the rest of the day.. So, I'm honestly so stumped. I thought maybe it might have just been my router, but I'm at my dad's house now and I'm not able to connect to his network, either. I might need to go ahead an order a new wireless adapter, but neither of us are that well with computers/networking. I'm hooked up via Ethernet cord which seems to be working fine, but my wireless is only able to read and not actually connect. (On occasion it will actually connect to the internet, but when it does I can't actually access the internet)I've tried uninstalling my wireless adapter, disabling/enabling it, a bunch of weird commands that I don't even know what they do (.. probably shouldn't have messed with those), stopping/restarting services, etc.
ipconfig /all with Ethernet unplugged
Host Name . . . . . . . . . . . . : Taylorrr-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
My laptop is able to connect to the wireless router in my home, but the browser will never load a page, status is shown "connected". However, when I try on other laptops, they are able to surf the net. I have tried using my laptop at my friend's place with a different wireless router and it works at his place as I was able to surf the internet through my wireless! So, I've tried resetting my personal modem to factory default and it still doesn't work.
View 15 Replies View Related