I have broadband with a d link dir 601 router hooked to it.it's about 2 years old. My sons computer is straight hooked to the internet while I use the wireless in another room.I have no problems with it until about a month ago, my daughter comes over with her laptop and uses the signal, then all of a sudden it takes pages etc on my laptop forever to load. I have windows xp on mine, she has 2 laptops she switches from, 1 with xp,1 with 7.
Scenario: An alternative router was temporarily swapped into my network. After reconnecting the old equipment only network device is able to connect to the internet. My computer, the only device with access to the internet, seems to automatically resolve a Comcast IP, but all other devices obtain an address in the 192 range. Setting the IP address statically to the 192 range kills connectivity. The router continuously tries to obtain the IP information from the modem, but never does.
How do I fix the problem". Domain not set.invalid may not be the problem. had a power surge at my house and it took down my internet. I had to reset my router back to factory settings and I finally got the router to work with my PC. But I cannot access the internet from my iPad 2 or my Android phone. Both devices see the network and can hook up to the network but the internet is not working on either device.
Currently, I have a Cisco 4948 in office that connects to a remote site via BGP. From what I am seeing, when connecting a new device to this switchport (we connect devices to this switch for a multicast VLAN that is set up), the BGP link fails after roughly 20-30 seconds. The switchport is not tagged with a VLAN, or any other config. Just a plain old port. This outage continues until the port is added to the mutlicast VLAN.
Our internet has been acting strange the last couple days, it will just disconnected for like 5-10 seconds, then come back. Happens anywhere between every couple minutes or every 15-30 seconds. There are two computers on the network, and it happens to both computers at the exact same time.
Currently I have 3 computers in my house (My PC, Sister's PC and my Mums Laptop). My Mums and Sisters Computers work fine but RECENTLY (last couple of days) my computer when using the internet has become troublesome. Whenever I load multiple web-browser pages at once or try to connect to any online game server, my internet "laggs out" and refuses to load pages and even if it does they load INCREDIBLY slow. The only way to get back into any server is to reboot my modem and let my pc reconnect to it then connect to the server, even then it still has difficulty connecting and is delayed. My ping also spikes up when I am using skype and watching youtube video's. I have done a virus scan. I know its not my wireless adapter as I used my sisters one, I have tried using an ethernet cable and still the same result. I even tried our old adsl modem and still nothing. I'm getting really frustrated and have been unable to even load facebook in the last couple of days (I need facebook! I can post more information if needed, I am computer literate so I should easily understand anything anyone comes up with.
I've had 5 techs come to my house and no one seems too know the issue. At a random time in the day my internet will lag for a few seconds for about 5 hours, my ping in games and programs skyrockets, and I can't do anything.
Not sure if this is the right place to put my problem but I have a problem with my cisco router and I have no clue what is causing it. I tried using QoS and the problem still occurs. Any time during a game or streaming video I would lose connection for example in wow I will be able frozen can't cast or do anything. If I'm watching a streaming video it would lose connection.
I have a problem with my cisco router and I have no clue what is causing it. I tried using QoS and the problem still occurs. Any time during a game or streaming video I would lose connection for example in wow I will be able frozen can't cast or do anything. If I'm watching a streaming video it would lose connection.
I had a linksys WRT54G and it would work fine. No disconnects or freezing during gameplay.
Also if i'm using pandora it works fine. When I get a DC or frozen game I can still surf the internet. This happens on all my PC's/MAC's/WLAN or LAN
here is my config.
! darkorb#show run Building configuration...
Current configuration : 7387 bytes ! version 12.4 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption
Lately my internet speed is lagging like crazy. It's a Comcast cable internet so it shouldn't be this slow. Each time I go to the internet, I get the tuning circle (Internet Explorer 9) for like ages before any internet comes on. It used to be almost instantly.
Is it my PC or is it my cable modem? I have resetting the modem many times but it's still the same. FYI: Windows 7 and IEX 9 and Motorola Cable modem SGB6580.
Farmville plays fine, frontierville is ok, cityville is taking a long time to display friends list to request gifts, and wild west town is the same if it loads at allthis all started about a month ago and i don't know why. I'm trying optimise programs at present still no difference.
My internet connection keeps freezing when I'm trying to play Diablo 3. I can't connect directly to the modem because it's my roommates internet and it's connected to her computer so my only option is wireless or to connect directly via adapter that goes through the power outlets in the house. It's getting very annoying skipping around and it's almost impossible to play diablo 3 with this lag. I notice I drop a lot of packets when pinging to the diablo 3 server and I don't know why.
My network key was changed recently, and it took a few tries for my laptop to connect, but when it did it was fine. Then the key was changed again, and now my wireless is wonky. Sometimes it can't find the network, other times it will find it but then can't acquire a network address, and if it does manage to connect (sometimes it will as soon as I click 'Cancel' when it's taking forever to get the address) it starts slowing down and then speeding up again. The settings have not changed on anything, other than the network key.
I have an internet connection of the speed of 384 kbps, settings are default i changed nothing. firmware is updated. i'm using wireless connection.any settings you will recommend like in MTU, Beacon Interval, RTS and fragmentation?
My BEFSR81 is my primary router and has DHCP turned on. The router's DHCP range is set to accommodate 12 devices. I have three computers wired to it and their Host names (as specified in the set-up of each computer) show up in the router's DHCP device table. I also have two printers (one old Brother HL5250DN laser printer and one new HP Photosmart Premier C410a inkjet printer) connected and there are blanks where the Host name should go. I would like to be able to tell which printer is which when I am looking at the DHCP device table. How can I get a names associated with each printer's IP address in the router's DHCP device table? (The real problem is that the router seems to have both printers at the same IP address (192.168.1.100) and if I can get one of them to change I'd like to know which one it was!)
We are using LMS 3.2.1 with SP1 and Campus Manager 5.2.2.Server runs Windows 2003 R2.Everything runs fine except for User Tracking on two Catalyst 6500 switches running CatOS. These devices are discovered, reachable, SNMP works fine, neighbors seen. But when we try to launch acquisition, the UT utility complains with this error message:"Failed to start acquisition: Device unreachable. Please enter a valid device."When we wanted to add ports via Device Trap Configuration, LMS has fired a different error message: "There are no ports to configure for the selected device(s).Check whether you have selected any router(s)." I have checked the portsData.xml file, which doesn't have any ports included for the two devices: [code] We have tried to exclude / include the switches in the data collection, but that didn't work.
The problem: I need to track a bus from city to city in real time.I'm thinking of a gps device without screen or apps, it only sends the current location to a server. Is this possible? What device can be useful?
This PC is connected to a Press machine in our Production area (Lan only with machine and PLC's) so I disable the LAN to the press then the 3G connection comes up with bps activity. I want to use teamviewer on the PC for remote support but teamviewer is unable to connect like it use to and its a free license. I tried internet explorer and "page cannot be displayed". There are no special proxy settings and DHCP IP. ( Windows XP with admin rights)
Whats confusing is even if the lan is disabled, the 3G connection would only come up now and then, but then I could add. The PC has viruses and very slow at the moment and I have loaded free AVG just to scan and clean some to see if it works. I cannot format the PC or something like that because there is production software and applications on with special settings that runs the R10 000 000 press machine and if the PC stops... trouble :/ I have ordered new PC for the press machine 18 000 Euros but that would take 12 weeks to arrive and if I could get the connection internet working on the machine it would be great.
Its actually owned by the charity that i volunteer for and is connected to their private network and the internet ,When the user logs on in the morning, the laptop will not connect to the internet, it will also not connect to the shared network drive, so i can assume theres a local connection issue too,the user has to restart the laptop several times before the laptop will connect.
I recently got a computer, and it's all running fine, except for the internet.My internet connects through wireless to a box, I have no idea what you call it. Router?The house has three active laptops, all of which are working perfectly fine. This new computer,however, is a desktop, and I am trying to connect to my house's internet through a USB stick device that transmits the signal (D-link, model DWA-110). I know for a fact that this device works for two reasons. Firstly, I've used it in another laptop, and more strangely, it works on this new computer sometimes too.After about half an hour of random methods to make a connection stick, it might connect. And it lasts until the computer goes to standby, or is turned off. This is just random stuff through the network and sharing centre part of the control panel.Nothing ever works twice, and I haven't been able to replicate it for about a week. It successfully connects, and the connection is real because I can access the internet momentarily. But it always just disconnects again. I've tried it in every USB port, too.The signal strength is excellent, and when it connects it works great. It just almost always fails to.
Sometimes my DSL can't connect and I have to wait until it fixes itself.Is there any way I can fix it by myself. I've tried to reset the router but it doesnt work.
My HP laptop connects to our wnr0003(or whatever it is) router but it says local only. When we took it to best buy, it connected there to the Internet oddly. And even odder, last year we had THE SAME router and it DID in fact, connect to the Internet, using the same router and all. So my question is, how do I fix this?
So the best way to explain this is if im on the internet i wont really notice it because it happens so fast and im on the page. also its wireless internet.If i play for example league of legends il be fine then il be reconnecting then im back but the reason im reconnecting is because my connection dropped for a second.IF i open say an online game and i open a stream watching someone. Either the stream will turn off or the game will disconnect or ill get kicked from both.Ive gone into command prompt and done ping google.com and stuff sometimes its perfect then i do it again it misses 2 with time out then i do again its perfect then again time out again time out then perfect its really annoying.I recently started playing a new game and il be running then disconnect from the servers because my connection dropped for a second and ive rang bt and stuff have 2 new hubs. switch phone lines replaced filters still dont know whats going on.
I have a wireless router with my sky broadband account.My computer crashed and when I repaired it without losing files etc, it wiped the system clean.I had to go from Vista to XP as the pc never had a recovery disc with it.I have also recently upgraded to Windows 7 extreme, however the problem remains the same in that, the pc will not detect the wireless router. However, my dads laptop which I am using now, DOES connect to the internet.I have spoken with Sky support and after going through all the usual checks and tests, they have decided it is a pc fault.
I have 3 computers running Windows and 1 running XP Pro.ISP is Charter. All these were connecting fine until Tuesday night storm came through. Power was out for a while due to a power pole being knocked down. Cable was on this same pole I think. Next day none of my computers could connect wireless.Used Ethernet cable direct to modem and finally got connection. To make a long story shorter, I find that now I can only connect unsecured or WEP. Can't connect using WPA2 at all.I wonder if it is possible that the ISP has blocked something to limit the speed?
WEP is only 54 MHZ WPA2 is upto 300MHZ
Tried 2 different Netgear routers with same results Currently configured for WEP shared
System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: Pentium(R) Dual-Core CPU E6600 @ 3.06GHz, Intel64 Family 6 Model 23 Stepping 10 Processor Count: 2 RAM: 8190 Mb Graphics Card: Mirage Driver, 2 Mb Hard Drives: C: Total - 476837 MB, Free - 428341 MB; Motherboard: Gigabyte Technology Co., Ltd., G41MT-S2PT Antivirus: Norton 360, Updated and Enabled
I have an old XP laptop which is now used for my wife on her embroidery machine and have tried to integrate it into the home wifi. The other three PC's/laptops all have win7. Is the XP not compatible? It sees and connects to the wifi with full strength, but I cannot access internet at all.
I decided to get rid of my wifi and go straight LAN wired internet connection to PC. The wifi connected fine, but when i plugged in LAN wired connection windows 7 does not detect connection. I searched through control menu and nothing. When connected to Asus Z68 motherboard orange steady light turns on motherboard. Also connected same wire to laptop via lan and windows 7 connects automatically.
Cumputer connects to network but not to internet. I've tried wired & wireless and get the same results. I get an error message that there is a problem with the bridge adapter
A former coworker of mine setup VPN capabilities to our office network shortly before he left. It is no longer working. We can connect to VPN but I'm not able to ping any devices on the remote network or Remote Desktop to any of the server. After 30 minutes, the VPN connection drops. I have attached our ASA 5505 config to assist in troubleshooting.
We have a few users connecting to another companies Firewall using the Cisco VPN Client, we are pretty sure our PIX (sat at the edge of our network) is causing issues whereby after an unknown amount of time the VPN client will timeout and lose connectivity.I did outputted some level 7 debug to syslog and I cannot see anything that happens during the time he has lost connectivityI can see his RDP packets getting denied to the remote ends private IP address but nothing that shows a denial or a drop of anything from our pix.We are sure its this pix as we used to connect via a different route and a different pix and it never dropped
I'm working with a friend out with his computer, and he can't connect to the internet, but i can.But he uses a different computer system than me and turning on the wireless networking.
Recently my laptop has had problems connecting to any wireless routers.
Now and then it will connect but not for very long - 10-15 mins max, then connection will be lost even though the signal strength is strong. It sometimes connects after it has been asleep for a while or when it's been turned off.
I have recently bought a new computer and have been happily connected to my wireless network for three months. The other day the connection was lost and now I cannot connect to my wireless or parents wireless networks. I can connect via the ethernet only. I will attatch an ipconfig for you to have a look at when I am not connected can see my wireless network connections however when I tempt to connect it says windows cannot manage it. I am running windows 7 home premium 64 bit[CODE]
