HP Workstation / Broadcom NetXtreme No Packets Sent Or Received

Oct 5, 2011

I have an HP Workstation that I have been working at constantly to get up and running on the network, it had "OpenCloudSecurity" adaware on it I believe and I was able to get that off with a couple of my freeware tools. The problem I am having is simply it will not connect to the network and only shows. 0Sent 0 Recieved and doesn't pull and IP configuration. I skimmed around and found that sometimes adaware/spyware can play with the TCPIP Stack and that your best bet is to reset the TCPIP stack and WINSOCK ; I did TCPIP Reset and Winsock multiple times with multiple reboots . I know it isn't the ethernet card because I popped in a live Ubuntu CD and it connected just fine on the wired ethernet.

View 3 Replies


ADVERTISEMENT

Broadcom NetXtreme Gigabit Ethernet Not Working?

Jan 30, 2012

I have a Dell Studio running windows 7 sp1. yesterday i was on the internet as normal. Today i was able to connect via my schools wifi, but not my ethernet cable. Device manager shows that my ethernet port should be available.

View 3 Replies View Related

Dell :: Broadcom NetXtreme 57xx Gigabit Not Reaching Gigabit

Nov 23, 2011

I'm running an Optiplex 330 with the Broadcom NetXtreme 57xx Gigabit ethernet card.

The computer is running Windows 7, 64bit, but there do not appear to be any drivers for that OS.I tried selecting Vista 64bit, but there were no drivers. The Vista 32bit doesn't work.

Then I went to Broadcom and found these drivers: [URL] the W764bit drivers didn't change the fact i'm still on a 100Mbit card (as seen on  Local Area Connection Status screen and the Device manager)

View 1 Replies View Related

No Sent And Received Packets?

Feb 3, 2011

My sent packets are 0 and also received packets. What can I do?

View 3 Replies View Related

No Packets Being Received On Pc

Jul 20, 2011

I use a wireless adapter to connect to our home network but its stopped receiving packets but is sending them. It has worked fine for ages now it just randomly stopped. The network works with everything else (laptops, Xbox and iPods) but my pc wont receive anything. Also our home connection has no password as we live in the middle of nowhere.

View 8 Replies View Related

Packets Sent But Not Received?

Oct 29, 2011

I am having a really hard time with a computer that has a wireless connection. Specifically the internet keeps going out. The computer info is that of the affected computer and not the host computer to which the router and modem are connected.

View 2 Replies View Related

Sent Packets Are More Than Received

Sep 9, 2012

How come my packets sent are so high.

View 3 Replies View Related

0 Packets Sent And Received / Can No Longer Connect To Internet

Feb 15, 2012

i can no longer connect to the internet and i have tried everything i could think of. my "wireless network connection status says 0 packets sent and 0 recieved,but im connected to my router with excellent signal. when i got this laptop it had alot of malware, i removed 283entries with malwarebytes in safemode. after i did that i couldnt connect to the internet.

View 1 Replies View Related

Protocols / Routing :: No Packets Received After Reformat?

Sep 13, 2012

I have an Acer Aspire one that connected perfectly to the internet until I did a reformat. Now it only works if through a wired connection or if the internet does not have a password protection. I have tried on 2 different locations with secure wireless and both have the same result. Packets are sent but not received. All other devices in either location are able to connect to internet through wired or wireless connections.IP address is at 192.xxx and DHCP is enabled, TCP/IP is set to obtain automatically and I deleted and downloaded the newest drivers from the Acer website twice. I also did a winsock reset and tried to clear the arp cache? One of the issues I am getting when I run the diagnostic is "warn default gateway address could not be resolved via arp". I'm not sure how to resolve that.

View 1 Replies View Related

PC Reinstall With XP - Wired Connection No Packets Received

Dec 21, 2012

I reformat my old PC and installed Win XP SP3. There were no errors during installation and everything works ok. However, I'm not able to connect to the internet with my ethernet cable. The LAN connection shows 'Connected' but properties shows some packets sent but zero received. There are no antivirus program installed, windows firewall is turned off as well.

I've tried the following:

- Tried the same ethernet cable connection to another PC and I was able to get on the internet (so no ISP or router issues I assumed).

- Fix the stack using Winsock - didn't work.

- Device Manager now shows Network Adapter > Atheros L2 Fast Ethernet 10/100 Base-T Controller #2 (no yellow question mark). Although I had to reinstall the driver after XP installation.

- Here's the result of ipconfig/all:

Windows IP Configuration
Host Name . . . . . . . . . . . . : fiu-cf8cd9c6ded
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown

[Code].....

View 4 Replies View Related

Linksys Wireless Router :: WRT54G Can't Connect To Internet - Send Packets But Not Received

Jun 6, 2012

I have a Linksys wireless router model WRT54G (not sure the exact model, it's not in front of me right now). It has worked flawlessly for the past several years, but for some reason has recently stopped working. I confirmed it's not a problem with the DSL Modem, as I can hard wire connect to my laptop and the internet works fine. It's clear something is wrong with the wireless router. I've tried unplugging, hitting the reset button on the back, and nothing has worked. My computer is able to recognize/locate the router and connect, it's just that I can't connect to the internet. One thing I've noticed under the wireless connection is that the computer is able to "send" packets, but not "receive." My experience is that this is always the case when I experience connection problems, but I have no idea what that means. I was going to call the Help Line, but I see it costs $30 which is likely more than my router is worth and probably 1/2 to 1/3 the cost of a new one so I am trying to troubleshoot myself.

View 8 Replies View Related

How To Use PC As Workstation

Dec 16, 2011

Can I use one 1 PC (Powerful PC) as a work station and can I use for to create different nodes.(Clients) Ex. By adding 5 Monitors to that PC, can it be treated as server/workstation ?So each monitor will be treated as single PC ?

View 1 Replies View Related

Internal Workstation DNS Cleanup?

Apr 24, 2012

Ok so I am working on this networking project for cleaning up our Internal DNS. So we are running untangle that uses DHCP. I am currently going though and 'Reserving' the IP addresses for each work station. This way we can connect to workstations and install software remotely. Problem is our Host (A) records are so messed up and PTR records point to multiple users/pcs. I am aware of scavenging, but we have that set to 14 days per our network admin, but during this time the DNS gets messed up because we have 30 people in our office running MAC's with VM bootcamp and they also use VPN connections. So for instance I use Mac with parallels 7. I used both wired and wireless connections to the internet. This creates 2 IP addresses that needs to be reserved and 1 bridged connection for my VM. So Technically I would have 3 host A records and 3 PTR records? But what about the VPN connection? Sometimes when other ping my work station (ex. ping link2057macbook) it returns an IP address that I used for my VPN and not the correct IP.

View 3 Replies View Related

What Is Terminal And Workstation In Networking

Feb 11, 2011

what is terminal and workstation in networking? I assume they mean client computers.

View 2 Replies View Related

Thin Client Or Workstation PC For Network?

Jun 16, 2011

I am setting up the network for the computer institue I work for. We are discarding the old network and are going for a new network. There will be 2 Computer Labs with 60 computers in each Lab. The staffroom will have 20 computers. The Accounts department will have 5 computers. All the departments are in the same building with just 2 floors. It will be a wired network. All computers should have access to the Internet. There will be a printer each in the 2 Labs, staffroom & accounts department which has to be shared with their respective network. The Lab computers will run MS Office, Adobe software etc. Likewise the the staffroom and accounts department computers will also have to run MS Office and probably Adobe software as well. We will be using Windows Server 2003 and are inclined to use IBM servers due to a partnership. Cost isn't a major issue and the management is willing to spend to set this up rightly in the first place.My main question is whether we should go for a thin client network with everything running in the main servers. In that case how many servers should we have and what would be the ideal config of those servers.If we go for workstation PCs for each user if cost isn't an issue then what are the benefits over thin client computersDo we have to have a separate server for data?

View 5 Replies View Related

Cannot Ping Local Domain Unless Specify DNS 1 On Workstation?

Nov 27, 2012

I cannot ping mydomain.local from any computer on my network. In order to this, I have to set DNS 1 as my server's ip address, then I can ping it. The reason this is a problem is because in order to add a workstation to my domain, I have to manually configure DNS to my server's ip. I have two networks, all new systems and this occurs on both. So obviously it is the way im setting things up[CODE]

View 13 Replies View Related

Cabling / Cards :: Keep Getting A 50% Loss On One Workstation?

Apr 24, 2013

I keep getting a 50% loss on one workstation. I tried switching out the network card and that seems to have resolved the issue... Do network cards exhibit strange behavior when they fail or am I overlooking a deeper issue?

View 1 Replies View Related

Workstation Services Won't Start Windows 7?

Feb 18, 2013

a workstation on our domain running windows 7 64 bit downloaded updates from microsoft. There was about a hundred of them. Since they installed the machine won't connect to the network shares. It can access the internet easily enough. The Workstation Service won't start. It comes up with an error 1068: The dependancy service or group failed to start. I used System restore to go back before the updates and everything worked again. Installed the updates and the problem re-appears. I have 2 wireless network adaptors so I disabled one.

View 2 Replies View Related

Share A Printer With Workstation Not In Network

Mar 25, 2012

I have a hardwired network with 10 workstations plugged into switch. Printer plugged into switch. Server plugged into switch.Switch plugged into router.Router DHCPs except printer is static IP. All have access to internet through server then out through router.Have added another workstation that is not allowed access to the network (on purpose) but needs to be able to use the printer. The workstation is not under our security for virus control, etc so I don't want it in the server. But it needs access to internet and access to printer. Should I create a separate subnet from the router and keep the workstation separate there? If so, then how can I keep the printer accessible to both subnets?

View 1 Replies View Related

Cannot Access Shared Folders On Another Workstation

Oct 1, 2012

I have got 2 workstations: test-pc and laptop-pc. Both 2008 server Sp1 x64 Both are added to Domain - 2003 server x86.My problem is:I cannot access shared folders on laptop-pc From test-pc if I am not physically logged in onto both machines. When I logged in as an administrator on both - everything is fine, but if I will turn laptop-pc on and leave it on Windows logon screen (without login) I wont be able to access anything on it.Is there anything I should enable/disable on Domain Group Policy to fix it?

View 1 Replies View Related

Cisco :: ACS 5.4 Installation On Vmware Workstation

Jan 21, 2013

is it possible to install  cisco acs 5.4 on vmware 8  workstation ?

View 1 Replies View Related

Dell :: PXE Boot On M50 Precision Workstation?

Dec 23, 2003

I am trying to do a PXE Boot with a M50 Precision Workstation.  I have flashed my BIOS to A12.  When I boot up, I get PC Boot Agent 4.31 and PXE 2.41.  It starts to do the DHCP, however it errors out with the message:

PXE-E51: No DHCP or proxy DHCP offers were received.

View 1 Replies View Related

When Installed WMware Workstation The LAN Connection Have Been Hidden?

Dec 31, 2012

i than when installed WMware Workstation my LAN connection have been hidden,when plug into cable TP CAT5 to Connector does not show in Network And Sharing center in Windows 7?

View 3 Replies View Related

What Policy Use To Record Unsuccessful Logos To A Workstation

Nov 25, 2011

If you have problems setting up a computer as a domain controller,what would be the best approach? Four DNS Zones you can configure? What policy would you use to record unsucessful logons to a workstation?

View 4 Replies View Related

Vista Workstation Unable To Connect To Internet?

Jun 29, 2011

I have a Vista Workstation that out of the blue today stopped connecting to the internet after applying the windows updates. I have gone back and rolled them out but it still will not connect.It is hardwired (Ethernet) to a cisco e4200 router that gets its internet from a motorola surfboard cable modem. I tried it with a wireless connection and had the same issue.Other computers on the network work fine both connected with ethernet and wireless. It won't assign an IP even though dhcp is enabled on the router, so I assigned a static one and it sees the local network just fine, I'm copying files from it to my NAS server without a problem.

View 4 Replies View Related

Access Laptop Hard Drive From Workstation?

Dec 5, 2011

My laptop lcd screen has died. No replacement part, 9 years old. I have attached a cat5 cable from my laptop to my router. how do I see the laptop hardrive on my work station.

View 1 Replies View Related

Connecting Server And Workstation To A Wireless Router?

Dec 20, 2012

I just moved into my mother house until I find a new house and need to connect my computer. Se has a wireless router. I have a server that was previously connected to a router and a workstation was connected to the router as well. It was all previously connected to the Internet via cables. How can I connect wirelessly? I am assuming I need a adapter to connect to the Internet. Do I connect the adapter to the server or is there an adapter that connects to the router?

View 1 Replies View Related

AS400 - Single Workstation Losing Connection?

Aug 21, 2012

I have a single workstation on an AS400 domain server, which is administered by a contract company, that continues to freeze up and then is kicked out of the network. The strange thing is that the computer also gets kicked off the Internet at the same time. I had the employee work from her laptop using the WI-FI connection while I attempted to troubleshoot the problem, and the laptop had the same thing happen. The strange thing is that she is the only one this is happening to. I originally thought it was a bad ethernet cable or bad port on the switch, but after the laptop had the same thing happen I decided the problem was else where. The contract company says that the problem has to be on my end, but thing that there could be something in her settings causing the problem. I have pinged the server with no problem, run a trace route with no errors reported, and made sure that the computer is set to a static IP as well. I have checked to make sure there are no other PC's. I also connected the cable to a different port on the office switch, connected my laptop with no problem, and had another employee sign onto her PC with a different sign on with no problems.

View 1 Replies View Related

Cisco WAN :: GRE Tunnel Between 10.0.0.2 Router And Windows XP Workstation

Nov 28, 2012

I need to setup GRE Tunnel1 between Windows XP 10.0.0.1 and HQ Cisco router 10.0.0.2 on HQ Cisco side I have: 

!
interface Tunnel0
ip address 10.0.0.2 255.255.255.252
tunnel source Ethernet0
tunnel destination 83.242.251.30
!
!        
 
But how to configue another point on Windows XP 10.0.0.1 side?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.4 Installation On Vmware Workstation?

Jan 21, 2013

is it possible to install  cisco acs 5.4 on vmware 8  workstation ?

View 1 Replies View Related

Cisco :: NCS 1.0 Support With Vmware Workstation Or Player

Sep 20, 2012

I want to test ncs 1.0 virtual appliance demo version with vm, as we are not having the hardware to install vmware Vsphere hypervisor we tried to mount in vmware workstation.Vmware workstation support to mount the virtual appliance with ovf or ova format,But it showing some eroor as attached screenshot.
 
Will NCS run with vmware workstation or player or how to test NCS ova format in lab environment.

View 1 Replies View Related

Can't Get Broadcom 802.11b/g To Log Onto WPA2 Network

Aug 31, 2012

Trying to get my wife's older laptop to connect to our wireless network. The laptop is a HP pavillion zv5000 running windows XP sp3. The network adapter is a Broadcom 802.11 b/g WLAN. The router is a cisco linksys WRT54G2 V1.5. The security on the network is WPA2 using TKIP+AES encryption. I can't get it to connect to the wireless network. If I bump the security down to WEP it will connect just fine.

View 5 Replies View Related

Dell :: Broadcom 802.11n Not Getting Installed

Nov 28, 2012

 i installed all the drivers i need  and it still wont install broadcom 802.11n , i have been on the phone with till for almost an hour.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved