EXPI9301 Intel NIC Keeps Disconnecting
Sep 6, 2012
I recently upgraded to a Intel EXPI9301CTBLK (PCIe) and have been having trouble with the connection disconnecting. Mostly I have noticed it when I have a torrent running with a lot of connections, but it has happened at other times as well. If I have 3+ torrents running it will disconnect every fifteen minutes or so. If I unplug the cable and reconnect it everything works fine. Otherwise it seems to work perfectly fine and will transfer files from my file server at 95+ MB/s.
I running Windows 7 and have not installed any drivers other than the ones that the OS automatically installs.
View 4 Replies
ADVERTISEMENT
Sep 17, 2012
I know now that this is a Desktop motherboard, officially not supported for Windows Server operating systems, but I would still like to get it to work. I've confirmed that the motherboard network works in WinXP (Intel 82579V Gigabit) and typically the 32-bit Windows XP drivers work on Server 2003 as well. Several of the other drivers have installed just fine, but the network driver install package fails with "No Intel Adapters are present."
I am trying to install Windows Home Server v1 (based on Windows Server 2003) on this box and just want to get a basic network driver up and running. I've checked the BIOS config, and Device Manager shows a yellow question mark by "Ethernet Controller". The ID is:
PCIVEN_8086&DEV_1503&SUBSYS_20408086&REV_043&11583659&0&C8 but I don't really know what to do with that...
View 1 Replies
View Related
Jan 24, 2013
I disabled my Intel PWLA8391GT because i wanted to test the onboard network, was not happy with the onboard network so i tried to switch back by enabling the drivers... well it then had a little yellow triangle with a ! in the middle it then told me that it could not start... I then restarted my computer and when i started it was in the unknow as pci device i then installed the drivers manually and it ran into the problem again..
View 1 Replies
View Related
Mar 15, 2012
windows server 2003 drivers
View 1 Replies
View Related
Jan 24, 2013
This first started happening a couple of weeks ago when a piece of software was put on to the computer off an external hard drive. First the wifi would turn itself off but after turning it back on it might happily stay on for a few hours before switching itself back off.The day before yesterday it decided to start turning itself off straight away. I plugged in with ethernet, uninstalled the old drivers and reinstalled new ones, this didn't seem to do anything so I turned on my firewall and titanium defense and after a while it decided to start working again.Earlier today I connected my DSLR camera to my USB 3 port to download pictures, this killed my wifi straight way. I reconnected with ethernet and I'm not sure what I did but now the wifi has decided to work again.
View 4 Replies
View Related
Mar 4, 2011
I'm running Win7 on a Lenovo x200. Has run fine for a year. Lately the wireless card disconnects and the system shows no available card. Have to reboot to reconnectThe card is an Intel 5100 AGN. Have tried uninstalling all software and reinstalling latest drivers from Intel and Lenovo. Have tweaked power saving controls, and tried about every suggestion out there. But the problem persists.
View 1 Replies
View Related
May 19, 2012
I have installed an Intel PRO/1000 MT Dual NIC into an HP Elite 8200 box on which I'm running Citrix Xenserver 6. The HP box also has an onboard NIC which works fine.
I'm having problems with the dual NIC. If I plug a cable into one or the other, but not both at the same time) that NIC lights up and shows as connected in the XenServer console. But as soon as I plug a cable into both NICs neither of them lights up and XenServer seems to lose sight of both of them.
Why can't both work simultaneously? Do I need to run an Intel utility of some sort on them to configure/flash them in a certain way for a Linux box (XenServer is based on Red Hat)?
I have also tried getting them both to work when booting into a Linux Live CD so I don't think it's a XenServer problem. I have also found that the exact same problem exists when the dual NIC card is installed in a Windows 7 system - one of the NICs will work, but as soon as you plug a cable into both the lights go out. So it doesn't seem to be an operating system issue.
View 3 Replies
View Related
May 19, 2013
I've been having some issues lately where if I am copying large amounts of files two and from my NAS and thus saturating my gigabit ethernet, web browsing and internet streaming slows down which is a bit of a bummer. I figured I might fix this with link aggregation.
My switches (Procurve 1810G-24 in basement and 1810G-8 in office) both support 802.3ad Link Aggregation. It works beautifully to connect them together, as well as to connect my FreeNAS box to the switch as well.
how do I set it up to work with my Windows 7 box?
I can't find the options for 802.3ad in the windows menus anywhere, and googling has not led me to the answer yet...
My motherboard has two on board Intel gigabit ports (Intel 82574L and Intel 82579V). Is it possible to link these two, or do I need to pick up another Intel PRO PT dual port copper gigabit NIC like I have two of in my server?
View 1 Replies
View Related
Dec 30, 2012
I let him take control of the system, he ran [URL] with me 6 feet from router, and then again 30 feet. Huge difference in speed, approximately 10x slower at 30 feet. He initially stated the problem was with the antenna connection and offered to send a tech to replace the antenna, which requires a display replacement as well. I was skeptical so pressed him to verify that this was a known solution since there were so many complaints. He was absolutely certain this was the issue, but put me on hold to double check. He came back and stated they needed to replace the wi-fi card from the Dell 1901 to Intel 2230 along with the antenna. As a former antenna engineer, I suspect the problem is the design of the antenna and/or its location, and not the drivers or wi-fi card.
View 1 Replies
View Related
Dec 29, 2012
I have just installed a Intel Pro wireless card into a HP Compaq nc6120 laptop, downloaded the basic drivers from HP's website but I get "no networks found in range".I've followed this thread: [SOLVED] Laptop Can't Find Wireless NetworkThe laptop was previously using a Sweex USB plugin adaptor and this had been working fine for years. I just fancied getting an internal card for this laptop - but cant seem to get it so work.
View 12 Replies
View Related
Jan 18, 2011
I've been trying to setup a wireless ad hoc network so I can connect to the internet using my iPod Touch. My wireless adapter is Intel(R) PRO/Wireless 3945ABG Network Connection running the most up-to-date driver.
- Set it so Windows configures my wireless network settings
- Created a wireless ad hoc in Wireless Network Connection Properties
- Changed it so that network access is given to ad hoc networks only
- For my LAN connection under Internet Connection Sharing, "Allow other network users to connect through this computer's internet connection" is ticked I am able to connect to the network that I setup but when I try to connect to the internet it fails.When I check the Wi-Fi Networks setting on my iPod Touch it gives this information:
IP Address: 169.254.1.158.228
Subnet Mask: 255.255.0.0
Router: (blank)
DNS: (blank)
Search Domains: (blank)
Client ID: (blank)
I checked and that IP isn't my IP?
View 3 Replies
View Related
Jun 13, 2011
my Intel wireless card keeps losing the connection. Until a couple of weeks ago it would be fine for roughly the first 20 minutes then the connection would just completely drop out and the only way to get it back again is to go into the network and sharing centre, disable the network card and then reenable it. Most of the time this works, but again for only the first 20-30 minutes, then I have to do it again. Occasionally it works for for longer but that's a rare occasion.Now not only does it do this, but also, if I put my laptop into sleep, sometimes when I turn it back on again the card will not connect to the network and I have to do the same disable and enable process.[ODE]
View 7 Replies
View Related
Jan 16, 2011
I have a Intel DH55HC motherboard running windows 7 and the Intel 82578DC Ethernet controller is coming up with This device cannot start (code 10)I have loaded the prowin32 driver download from the Intel site and also re-done the BIOS as instructed and it still wont resolve.
View 1 Replies
View Related
Feb 13, 2013
I would like to know how to set up a wireless connection intel advent7106
View 1 Replies
View Related
Jan 2, 2010
I installed an Intel 4965AGN into my Dell Inspiron (running Windows 7) to connect with 802.11n to my D-Link DIR-655. It refuses to connect in N mode, it will only connect in G mode. I have tried everything I could find online. I set security to WPA2-AES, and even tried with no security with no luck whatsoever. Before the 4965AGN i had an Intel 5300 which had the same problem, but I returned it because I thought it was a problem with compatibility with my Dell. Apparently something else is the culprit. What could I be over-looking?
View 9 Replies
View Related
Jan 21, 2012
My RIM Playbook will connect to the DIR-601. My HP Laptop with the Intel WiFi 5300 AGN will connect to it.
However the Acer Aspire 1640 with the Intel PRO/Wireless 2200BG will not.
SYMPTOMS: The system can see the network SSID, even seems to pick up the correct encryption (AES or TKIP) and also whether I've configured it for B or G modes. However when I attempt to connect to the network, the system prompts for the key, then pretends like it never did. A second attempt prompts for the key, and attempts to connect, but fails, simply saying "Cannot connect."
SOFTWARE: This laptop is running Windows XP Home Edition SP3. I've tried connecting using the Intel client PROSET software (the newest version, just downloaded) as well as the native Windows client. THE EXACT SAME BEHAVIOUR OCCURS, leading me to believe it's not a software issue.
HARDWARE: This is a D-Link DIR-601 at Hardware Version B1 and Firmware Version 2.00NA
I have the router set to WPA-Personal, WPA2 Only, TKIP (have tried it on AES too), G only (have also tried B only). The router has already been hard reset and I started over from scratch. I've also ensured I have the latest drivers for the wifi adapter.
Other laptops, tablets, and even phones can connect to the router with no issue.
Seems like this is an incompatibility with this particular Intel WiFi adapter, but cannot find any official list of incompatible hardware I can use to confirm.
Would changing the software to DD-WRT work in this case, do you think? Or is this more likely to be a hardware thing?
View 14 Replies
View Related
May 10, 2011
If you had to chose between Dell and another OEM manufacturer for a server to be used in a 1-20 user/employee/computer office network, which OEM would you go for? For a long time I have been recommending/selling Dell servers to my SMB clients (mainly the Poweredge T series) and am pretty comfortable working with these servers. However, I'm also a Lenovo business partner and they seem to have some aggressive pricing. Have any of you used Lenovo servers lately? Pros/cons? Warranty support good? I noticed HP is now selling Microsoft software licenses as a kit when you purchase a server, appearing to be discounted, even if you were to buy the licenses separately through a volume agreement.
Also, being that most of my clients in the 1-20 user/employee/computer office environment are looking at their bottom line, how would you configure a new server to run Microsoft SBS 2008 (some using Exchange, others not yet but may in future)? RAID1/5/10? 8GB RAM enough? Intel Xeon E5600 series processor? SATA or SAS drives?
Here is what I would normally build out a server from Dell:
single Intel Xeon E5620 processor
8GB RAM
PERC RAID card configured in RAID1
500GB SATA drives x 2
SBS2008 (I don't have much experience with SBS2011 yet, figured it would be best to let others work out any potential issues first)
View 19 Replies
View Related
Sep 19, 2012
I have a Intel Wifi Link 5100 AGN wireless card that isn't working properly. It will connect at first, then the connection is dropped. This started happening gradually, then became more and more frequent. I tried reformatting my computer, and this still is happening. When I use a wireless USB adapter, the computer has no problems using the wifi.
View 1 Replies
View Related
Feb 11, 2013
My Intel(R) Wifi Link 5100 AGN wireless adapter does not recognize network connections. I corresponded with Intel, after updating drivers etc., the tech concluded that I probably need a new adapter. I have a Studio 1555(1550?). I would like to purchase a USB adapter.
View 1 Replies
View Related
Dec 27, 2012
I have two PC's in my house. One server, one workstation. Both running Windows with Intel gigabit NIC's (82574L and 82579LM respectively). Switch is a Cisco 3560G. Being on a LAN, everything is < 1ms.
I get different speeds when doing a Windows copy between the boxes.
From the POV of my workstation:
Workstation sending file to server: 189Mb
Workstation pulling file from server: 726Mb
From the POV of Server:
Server sending file to workstation: 396Mb
Server pulling file from workstation: 268Mb
Why is it so lopsided? I'm sure there are settings one can optimize in the Intel NIC drivers to bump up the speed.
View 5 Replies
View Related
Dec 6, 2012
Recently I've noticed that Intel My WIFI Utility is not starting up after reboot. I reinstalled WLAN drivers (downloaded the newest version from support.dell.com) but the problem persists. Is there any way to start it manually?I'm using Dell XPS l502x, Intel® Centrino® Wireless-N 1030, Windows 7 x64.
View 1 Replies
View Related
Nov 12, 2011
I have an Intel GT 1000 NIC installed in my XP Pro SP3 PC.I downloaded the driver update file for this NIC: "PROWin32.exe", version 16.6, dated 9/30/2011 for Windows XP 32 bit.The install failed with the following error message: I emailed these details to Intel Tech Support but have not yet heard back from them.
I searched my PC for "VC90_CRT_x86" and found it in many *.cab files but not as a single file anywhere else on my computer. How to get the new driver to install? I'm using the GT 1000 because the Realtek NIC that is on my MOBO failed a couple of years ago.
View 6 Replies
View Related
Dec 22, 2012
Is this processor model "Intel Xeon E7 4830" supported for the installation of Cisco Prime LMS 4.1 in a virtualized environment ?
View 1 Replies
View Related
Apr 3, 2012
i used intel DH61WW mother board, processer is intel core i3 3.10 Ghz speed, I need lan drivers for this board OS is UBUNTU 10.04 my E-mail ID is ( url.... )
View 1 Replies
View Related
Jun 1, 2011
I have an HP laptop running Windows XP almost five years old which contains an Intel Pro Wireless 3945ABG network device. It connects fine with my router WiFi running off DSL. I recently bought an iPhone 4 and set it up as a personal hotspot. I've been able to connect a friend's Macbook to it. But even though my HP laptop sees the iPhone network, when I try to connect to it I get "Unable to connect to this network. It may be out of range." I've downloaded the current update for the wireless device.
View 1 Replies
View Related
Jul 31, 2012
I have this laptop with a built-in Intel Centrino Advanced-N + Wimax 6250 adapter to connect to WiMAX.Right now I have a WiMAX connection at home with a simple gateway. So what I want to do right now is trying to connect to this network using my built-in adapter.I'm facing right now is that the driver of the adapter only searchs for a certain provider from the US (Clear). I'd like to subscribe to their service but I live in Argentina so that's not a valid option. So my question is if you know of a custom driver or some other way to search for my local wimax network.
View 1 Replies
View Related
Jan 14, 2013
After updating driver Intel(R)82578DC Gigabit Network Connection my computer cannot find modem Experiabox from KPN (Netherland). Temporely solved by restore to the old version?
View 1 Replies
View Related
Sep 5, 2011
I have just reformatted my Fujitsu A6120 lifebook laptop and I downloaded all the drivers and everything installed fine except for the Intel PRO/Wireless Network Driver. I even downloaded the driver from Support Downloads. After I installed it, a notification popped up in the task bar with the Intel(R) PROSet/Wireless saying Driver is not installed. edit: in device manager, under network adapters there is only the 1394 net adapter and there are yellow exclamation marks in other devices.
View 19 Replies
View Related
Jan 17, 2012
slow ping times with Realtek, no problems with intel
View 1 Replies
View Related
Mar 29, 2011
After trying to communicate between an XP machine and Win7 using static IP and a crossover cable my wireless card stopped working. I did make the mistake of trying Homegroups prior to that.
It says Unidentified network and constantly remains in the Public Profile. Not even WiFi Sync is working...diagnostics reveal a problem with the drivers though several have been tried. From the originals to the latest version...Properties describe the device is working normally?
View 6 Replies
View Related
May 5, 2012
Can I upgrade or add WPA to WEP on Intel(R) PRO/Wireless Lan 2100 3B Mini PCI Adapter
View 1 Replies
View Related
Aug 11, 2011
I have a Dell Intel 3945abg wireless. Its work great for the time I've been using it...until today. I have the red cross on the icon and it will not enable even though everything else checks out. I've uninstalled and installed the drivers and it is recognized.
View 1 Replies
View Related
Jul 13, 2012
I am trying to connect to a d-link 2680 using intel proset wireless but when i try to input the password it will only accept numbers not letters.
View 5 Replies
View Related
