D-Link DIR-655 :: Cannot Connect In N-mode With Intel 4965AGN
Jan 2, 2010
I installed an Intel 4965AGN into my Dell Inspiron (running Windows 7) to connect with 802.11n to my D-Link DIR-655. It refuses to connect in N mode, it will only connect in G mode. I have tried everything I could find online. I set security to WPA2-AES, and even tried with no security with no luck whatsoever. Before the 4965AGN i had an Intel 5300 which had the same problem, but I returned it because I thought it was a problem with compatibility with my Dell. Apparently something else is the culprit. What could I be over-looking?
View 9 Replies
ADVERTISEMENT
Feb 17, 2012
Recently purchased a Linksys E4200.Computers on network:Two hard-wired gigabit desktops: one Windows XP, one Windows 7One hard-wired 100mbps desktop running Windows 7One laptop with an Intel 4965AGN running Windows 7.File transfer rates between any of the desktops and the laptop is very slow: ~2 megabytes/s
File transfer rates between the gigabit desktops is good (~50 megabytes/s, hdd bottleneck), transfers between the 100mbps desktop and one of the gigabit machines gives ~10 megabytes/s.Currently running on the 5Ghz band, connected with N at 300 megabits, good signal strength. Disabled mixed mode on this band, enabled N-only.Use a scanner tool, I can tell that there are no other networks on 5Ghz band.Also, tried 2.4 Ghz band and got similiar low speeds.These transfer rates are much below what other people report for real-world throughput. Any ideas? I know there is an Advanced Wireless config page, is there a setting there that might work if adjusted?
View 1 Replies
View Related
Jul 30, 2011
Which Intel network cards runs well with E4200 (latest FW)? I mean good connection and transfers rate. I have two clients with the same cards (Intel 4965agn, latest driver) and I got transfer rates at 144 Mbps with both radios working (2.4 and 5GHZ on the E4200). When I try to use 5Ghz only it drops to 54 Mbps and for 2.4Ghz it drops for 130 Mbps. Could I reach better transfers rate with a Intel 4965agn card (300 or 450 Mbps)?
View 4 Replies
View Related
Jan 21, 2012
My RIM Playbook will connect to the DIR-601. My HP Laptop with the Intel WiFi 5300 AGN will connect to it.
However the Acer Aspire 1640 with the Intel PRO/Wireless 2200BG will not.
SYMPTOMS: The system can see the network SSID, even seems to pick up the correct encryption (AES or TKIP) and also whether I've configured it for B or G modes. However when I attempt to connect to the network, the system prompts for the key, then pretends like it never did. A second attempt prompts for the key, and attempts to connect, but fails, simply saying "Cannot connect."
SOFTWARE: This laptop is running Windows XP Home Edition SP3. I've tried connecting using the Intel client PROSET software (the newest version, just downloaded) as well as the native Windows client. THE EXACT SAME BEHAVIOUR OCCURS, leading me to believe it's not a software issue.
HARDWARE: This is a D-Link DIR-601 at Hardware Version B1 and Firmware Version 2.00NA
I have the router set to WPA-Personal, WPA2 Only, TKIP (have tried it on AES too), G only (have also tried B only). The router has already been hard reset and I started over from scratch. I've also ensured I have the latest drivers for the wifi adapter.
Other laptops, tablets, and even phones can connect to the router with no issue.
Seems like this is an incompatibility with this particular Intel WiFi adapter, but cannot find any official list of incompatible hardware I can use to confirm.
Would changing the software to DD-WRT work in this case, do you think? Or is this more likely to be a hardware thing?
View 14 Replies
View Related
Feb 28, 2012
i got a Dir-655 router and Dell 1501 wireless -N mini PCI card (802.11 bgn compliant). Router was set to mix mode but my desktop Dell XP8300 can connect only till G mode.
1) I search on web and some said that i need to set my router to N mode only for my desktop to connect to N mode. IS THIS SOLUTION CORRECT??
2) Another issue was my sis got other old brand latop which can only connect to B mode, if i set to N mode only, she won't be able to connect it right?
View 14 Replies
View Related
Apr 16, 2012
D610 - Intel PROSet
tab: Advance>>"Use Windows to manage WiFI" (F10)
When in Windows MODE the view network in range does NOT pick up anything even though the connection still exists.
How do I configure to see the networks in range ?
View 12 Replies
View Related
Aug 22, 2010
I've got a DIR-655 set in bridge mode after a Cisco router. It's been working great for months, but now I'd like to add a new wireless device and want to get the settings. For the life of me, I can't remember how to access it now.The subnet is 192.168.2.XXX I've got a Mac connected through the "internet" port and a cat5 cable. I figure I should be able to go from 192.168.2.1 through 192.168.2.254 and will eventually find it. Is there something I'm missing?
View 7 Replies
View Related
Sep 17, 2012
I know now that this is a Desktop motherboard, officially not supported for Windows Server operating systems, but I would still like to get it to work. I've confirmed that the motherboard network works in WinXP (Intel 82579V Gigabit) and typically the 32-bit Windows XP drivers work on Server 2003 as well. Several of the other drivers have installed just fine, but the network driver install package fails with "No Intel Adapters are present."
I am trying to install Windows Home Server v1 (based on Windows Server 2003) on this box and just want to get a basic network driver up and running. I've checked the BIOS config, and Device Manager shows a yellow question mark by "Ethernet Controller". The ID is:
PCIVEN_8086&DEV_1503&SUBSYS_20408086&REV_043&11583659&0&C8 but I don't really know what to do with that...
View 1 Replies
View Related
Apr 2, 2012
Upgraded my D620 WLAN card from original 3965abg to 4965agn for wireless-n support. The card is correctly installed (w/ 3 antennas) and the driver installed correctly but there seems to be a conflict with Dell Quickset utility which gives the error "WiFi Catcher band is not compatible". Tried uninstalling the Dell Quickset, but not sure it completely removed everything. Installed Intel PROset/Wireless but still unable to connect. Could not find a Quick set version for Win7 - from what I have read, it seems the Vista version is noted that it does not support 4965agn.
View 10 Replies
View Related
May 19, 2013
I've been having some issues lately where if I am copying large amounts of files two and from my NAS and thus saturating my gigabit ethernet, web browsing and internet streaming slows down which is a bit of a bummer. I figured I might fix this with link aggregation.
My switches (Procurve 1810G-24 in basement and 1810G-8 in office) both support 802.3ad Link Aggregation. It works beautifully to connect them together, as well as to connect my FreeNAS box to the switch as well.
how do I set it up to work with my Windows 7 box?
I can't find the options for 802.3ad in the windows menus anywhere, and googling has not led me to the answer yet...
My motherboard has two on board Intel gigabit ports (Intel 82574L and Intel 82579V). Is it possible to link these two, or do I need to pick up another Intel PRO PT dual port copper gigabit NIC like I have two of in my server?
View 1 Replies
View Related
Sep 19, 2012
I have a Intel Wifi Link 5100 AGN wireless card that isn't working properly. It will connect at first, then the connection is dropped. This started happening gradually, then became more and more frequent. I tried reformatting my computer, and this still is happening. When I use a wireless USB adapter, the computer has no problems using the wifi.
View 1 Replies
View Related
Feb 11, 2013
My Intel(R) Wifi Link 5100 AGN wireless adapter does not recognize network connections. I corresponded with Intel, after updating drivers etc., the tech concluded that I probably need a new adapter. I have a Studio 1555(1550?). I would like to purchase a USB adapter.
View 1 Replies
View Related
Jul 13, 2012
I am trying to connect to a d-link 2680 using intel proset wireless but when i try to input the password it will only accept numbers not letters.
View 5 Replies
View Related
Apr 5, 2010
I recently built a new computer with an Intel DP55WB motherboard which contains the 8257DC Gigabit controller. I am running Windows 7 64-bit with the latest Intel drivers. I have noticed that when the new computer is on the network, the wireless recycles and then completely fails. I thought the DIR-655 had died, but when I rebooted the router with the computer turned off, the wireless came back up. I checked the router logs, and multiple wireless restarts are clearly indicated. After about a dozen wireless restarts, the wireless turns off. I am running firmware 1.20 (I haven't seen any reason to upgrade until now).
View 3 Replies
View Related
Jun 18, 2012
I bought my Dell XPS 1640 in 2009, as wireless connection card I have an intel Wifi link 5100 AGN. This card worked properly till last week all of a sudden i got unexpected DC's and all this requierd me to restart the PC 4-5 times to get 5 minutes of internet.
I know this is a known issue and it occures on random times according to the forum mentioned below url...
My question is is there a new line of cards for my laptop which DON'T have any reports about this?
View 5 Replies
View Related
Oct 12, 2011
My router broadcasts at 5GHz and 802.11n and despite having a an up-to-date Inetl(R) Wifi Link 1000 BGN driver teh computer does not recognise the network.
I googled and this appeared to be a lot of peoples problems, people who are offering remedies by buying a wireless adpater. URL
Personally I don't want to do that.
View 5 Replies
View Related
Jan 13, 2013
I recently lost network connection using the built-in Intel(R) WiFi Link 5100 AGN. Stupidly, this happened while I was still under a Service Contract, but due to the holidays, I put it off and the contract expired the middle of December. I have a Studio 17/1745, I disconnected the internal WI-fi card and use a USB D-Link N and I now have WI-fi. Should I purchase a new internal WiFi card and if so which one.
View 1 Replies
View Related
May 13, 2013
Host Name: BOBOS Name: Microsoft Windows 7 Home Premium OS Version: 6.1.7601 Service Pack 1 Build 7601OS Manufacturer: Microsoft CorporationOS Configuration: Standalone WorkstationOS Build Type: Multiprocessor FreeRegistered Owner: Registered Organization:Product ID: Original Install Date: 27/11/2009, 10:18:51 PMSystem Boot Time: 6/05/2013, 7:51:57 PMSystem Manufacturer: Dell Inc.System Model: Studio 1745System Type: x64-based PCProcessor(s): 1 Processor(s) Installed. [01]: Intel64 Family 6 Model 23 Stepping 10 GenuineIntel ~2801 MhzBIOS Version: Dell Inc. A04, 22/03/2011Windows Directory: C:WindowsSystem Directory: C:Windowssystem32Boot Device: DeviceHarddiskVolume2System Locale: en-au;English (Australia)Input Locale: en-us;English (United States)Time Zone: (UTC+10:00) Canberra, Melbourne, SydneyTotal Physical Memory: 4,091 MBAvailable Physical Memory: [Code]....
View 6 Replies
View Related
Jun 14, 2011
I have the same issue and have been surfing the web for the solution for quite some time. Brand new Sony VAIO laptop with blu-ray has an Intel WiFi bgn 1000 wireless network adapter. It worked fine for couple of days, until i brought it to work. We use wireless connection in our office. Maximum 7 computers are connected at a time. All other 6 laptops connect to our network with no problems (all of them are on win7x64). Now, back to the problem. Wireless works at home and at work in the evening , when no one in the office. I've removed all 3rd party software, uninstalled Intel software. Am using clean driver from the Intel website. Tried different revisions of the driver - issue is still there. I've contacted VAIO support. This is not known issue to them. They offered standard actions (unisntalling the driver, power management options, enabling VAIO Smart Network). No updates of fixes on their support website. I have also checked in the event viewer. There is only one service being enabled and disabled constantly (TCP/IP NetBIOS Helper) - which is happening at the same time with wireless drop. There are about 5-8 drops per minute. Computer browser service disabled. Firewall disabled, antivirus disabled. We assume this could be an interference with mobile diveces. While now, we have disabled all wireless cards on all computers, switched off mobile phones. And... AXAXAXAXA!!! BSOD 0x00000018 (0x000....00, 0xFFFFFA800754A750, 0x00...02, 0xFC01020EFC01020B).
View 5 Replies
View Related
Jul 19, 2012
I've had this problem for a while. I'd only get a dial-up icon with a red cross after startup or diagnostics, and no wireless networks could be detected. So I installed the HP wireless assistant, and restarted the laptop. It started working fine. Today, the icon went yellow with limited access, so I ran troubleshooting. And the problem was back. The dial-up icon reappeared, and the wireless assistant showed the WLAN was disabled. I checked the device manager. The wifi link 5100 AGN had a yellow mark on it, and in properties tab, it said ' the device is not working '. I scanned for hardware changes, and the 5100 AGN disappeared ! I restarted my laptop, and now its nowhere to be seen. Even the wireless assistant now shows only 'Bluetooth' as a connection.
I have an HP HDX16 1140us laptop.
View 1 Replies
View Related
Mar 16, 2013
I got a new laptop for Christmas that came with the Intel(R) Centrino(R) Wireless-N 2230 card that supports 802.11N. I am only seeing connection speeds of 1500mbps rather than the 300mbps that he DAP-1522 advertises.I found this on the d-link site but from what read on the Intel site about the card it supports the 40Mhz band. url...
View 3 Replies
View Related
Jul 10, 2013
Mine studio 1555 with intel core 2 duo P8700 [URL] processor and intel wifi 5100 agn card stopped connecting to router since last week. After searching a lot I found out that the Intel has stopped supporting 5100 for windows 8. Is there any way possible to use the same adapter with compatibility drivers on windows 8?? I have searched a lot but couldn't find much. All the new intel cards like "Intel Centrino Wireless-N 2200", n6300 are of 22nm while my processor is of 45nm. So will the newer card work with my processor.
View 1 Replies
View Related
Jun 15, 2012
The problem is that it always stays around 121-150mbps and sometimes 270mbps(beside router). here is my wireless settings on my router
router setting 1: [URL]
router setting 2: [URL]
network card setting:
802.11n channel width:auto
802.11n mode:Enabled
Ad-hoc channel:11
Fat channel intolerant:Disabled
Roaming aggressiveness :Medium
Throughput enhancement:Disabled
Transmit power:Highest
Wireless mode:802.11a/b/g
View 9 Replies
View Related
Nov 10, 2011
Just recently upgrade our 2 5508 controllers from 6.0.199.0 to 7.0.116.0. Since that upgrade, I have a handful (8 to 10) of wireless laptops that now refuse to associate to any access points. The thing these laptops all have in common is some variation of the Intel Wifi Link AGN cards. I have about 200 other clients out there working just fine.
I've tried everything under the sun that I can think of. Patches, drivers, the whole sh'bang.
Is there a known issue with 7.0.116.0 and these particular cards?
View 17 Replies
View Related
Jun 1, 2011
I have an HP laptop running Windows XP almost five years old which contains an Intel Pro Wireless 3945ABG network device. It connects fine with my router WiFi running off DSL. I recently bought an iPhone 4 and set it up as a personal hotspot. I've been able to connect a friend's Macbook to it. But even though my HP laptop sees the iPhone network, when I try to connect to it I get "Unable to connect to this network. It may be out of range." I've downloaded the current update for the wireless device.
View 1 Replies
View Related
Jul 31, 2012
I have this laptop with a built-in Intel Centrino Advanced-N + Wimax 6250 adapter to connect to WiMAX.Right now I have a WiMAX connection at home with a simple gateway. So what I want to do right now is trying to connect to this network using my built-in adapter.I'm facing right now is that the driver of the adapter only searchs for a certain provider from the US (Clear). I'd like to subscribe to their service but I live in Argentina so that's not a valid option. So my question is if you know of a custom driver or some other way to search for my local wimax network.
View 1 Replies
View Related
Mar 9, 2013
I just received a Wifi adapter from my internet provider and my laptop does not connect. I thought that my laptop comes with Wifi in it already. I called dell and they told me to buy it? I dont understand, I am connected with my network, I am able to connect wifi with my PS3 and Iphone but not with my laptop.
View 1 Replies
View Related
Nov 27, 2011
I'm on a Dell Inspiron 530 using an Intel 82562V-2 wireless adapter.Ever since my PC fell asleep while I was updating to iOS 5.0 on my iPhone, I havent had wireless.It's not acknowledging my network.
View 10 Replies
View Related
Apr 29, 2011
Since successfully restoring my laptop to factory settings I have been unable to connect using my Intel PRO/Wireless 3945ABG Network Connection.Initially it worked, but after a while it stopped. I have completed several system restores, and the wireless connection works for a few days. On the last occasion (after installing windows updates) I received the dreaded blue screen and have been unable to connect.I am not sure if it is related to installing new windows updates as prior to restoring to factory settings I had no issues with my wireless connection.I am able to connect using the ethernet cable and I am currently able to connect using Pluscom wireless usb adapter.I am using the fujitsu siemens amilo pi 2515 notebook.netgear dg834g router?
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . :
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 19 Replies
View Related
Apr 28, 2011
Dell 8600 centrino intel pro wireless lan 2100 won't connect to netgear n150 wnr1000. Running 802.11b band it sees wireless network but won't connect. I have 2 other computers connected to network so it works.... I don't know if Netgear n150 is compatible with 802.11b band...
View 1 Replies
View Related
Jan 13, 2012
I have verified that I am set to auto connect however my wireless does not do so upon start. I have to do so manually each time I use my computer. This is a new problem since installing the newest driver update because I could not connect at all or randomly. The update fixed the connection problem and I no longer have dropped connections and wifi connection back to normal. HOWEVER it has left my auto connect nonfunctional.
View 7 Replies
View Related
Aug 20, 2011
I have searched on the problem as much I as I can to no eval, I can not get the Intel 5300 on a Lenovo T400 to connect at N on either radio
I tried evey combination of settings possible on the E4200 and on the 5300 Which was a lot of combinations I can only get the a G connection on 2.45ghz and only an A on the 5ghz
To make things worse, trying to call Lenovo is pointless without a warrenty they wont even answer simple questions without out it, totally insane!
View 2 Replies
View Related
Feb 14, 2013
I've got a Centrino Advanced-N 6205 for Desktop wireless card and I'm trying to use the Intel My WiFi hotspot feature to connect my Xbox 360 Slim. The SSID shows up in the Xbox's networking settings, but after I enter the WPA passkey it fails to connect.
View 2 Replies
View Related
