Allow Remote Start / Stop Off Applications?

Nov 28, 2011

I would like to allow another user to access my home server to be able to restart his teamspeak/ mine craft servers. I know game hosting companies can do it and would like to know how I can have him be able to restart them without remote desktop.

View 2 Replies


Can't Connect Via IE Unless Start Then Stop VPN

Feb 21, 2012

I boot my computer at my company and if I immediately try, I can connect to the internet with IE or Chrome'm on my company's network. A few minutes after computer start up, I can no longer connect to the internet (times out). However, if I then open VPN, connect to the company network and turn right around and close VPN I now can connect to the internet. I've queried my IT group and they get a 'Huh?' expression on their face

View 5 Replies View Related

Linksys Cable / DSL :: Stop And Start Internet Connection With X2000?

Jun 25, 2012

I just installed the X2000 and managed to get my Win7 Home Premium to connected to the Internet and also one wireless device. I previously had just a modem.  Sometimes, when my PC is up and running, I want to disconnect it from the Internet and later connect again.  There is an icon on the lower right of my toolbar which, with my old modem, allowed me to connect and disconnect but it seems to know only about the old modem.  Basically it operated by starting the sequence:  All Control Panel Items>Network Connections>Broadband Connection.  Now this function does work; it tries to connect (through "WAN Miniport (PPPOE)") and gets "Error 651: The modem (or other connecting device) has reported an error".  Can you tell me what where is the program that seems to start the Internet connection for the X2000 and if I can change parameters for the Win7 "Broadband Connection" to use the X2000?  Perhaps the parameter "Connect on Demand" in the "Basic Setup" of the X2000 is involved?

View 9 Replies View Related

Local And Remote Desktop - Applications Are Slow?

Jun 21, 2011

Currently, my work computer has (obviously) a local desktop. Also, we use a Remote Desktop for our shared network drive (our head office is on the other side of the country). The annoying thing is that if I am looking up a document on the share drive (Remote Desktop) and I want to work on it, the Remote Desktop applications are slow. So I'd rather work on it on my local desktop. However, I have to email it to myself, exit the Remote Desktop, retrieve it from my mail (in local desktop) and then save it

View 2 Replies View Related

Unable To Start Remote Desktop Services On Windows 7 Machine?

May 2, 2012

If I am not able to start remote desktop services on windows 7 machine, will machine can be accessible by RDP?

View 1 Replies View Related

Applications Unable To Connect

Jul 4, 2011

Most of my applications and games that connect to the internet are unable to do so. My browser is working fine, though.This morning, my AVG found 2 trojans, and deleted them. However, it also deleted a couple registry keys along with them. I suspect this might be the problem, or maybe the antivirus itself, but I don't know which keys were deleted.

View 1 Replies View Related

Get Disconnected From The Online Applications?

Nov 8, 2011

I randomly get disconnected from the online applications that I'm using.(Msn, skype, online games, etc.)And I'm running this program in the background to check what's going on.As you can see, everything is normal till I get 0 ping for a couple of times, then it immediately goes back to normal till it hits 0 ping again.It's very random, it happens on the 345th hop or 789th etc.I'm on a wi-fi connection but not using wireless modem.The cable's plugged to my computer.

View 14 Replies View Related

Applications For Testing Line Quality?

May 25, 2011

We are having issues transferring a 200GB VHD file across our point to point without being corrupted in the process. Any good application for testing the line quality across the point to point?Preferably we want something free, but if there is an in depth tool that costs money, we are open to that option as well.

View 1 Replies View Related

XP Applications Freeze When Printing Over Network

Mar 31, 2011

I've tried scanning for viruses, using winsock fix (they had a static ip I also set to automatic since they should not need it). I just turned off the firewall as well, tried "selective startup" and unchecked "load startup items" and nothing has worked so far. We're working on giving them another computer but I'd like to know why this happens.

View 7 Replies View Related

How To Block Phone Applications From The Internet

Jun 28, 2011

I recently was instructed to block Facebook from a specific persons phone. I was able to block access to Facebook from the browser, but this person can still access Facebook via the mobile app. I have already placed and on the "no-go list" on my router, which like I said, specificaly blocks the browser on phone, but not the app. I can't seem to figure out how the app accesses the site and how to block it.I've already done some Googling, and read that port 9339 plays some kind of role. I don't know how true this is, but I tried it anyway, to no avail. I am not to savvy with ports so it could be my error.And before it is mentioned, this person cannot access cell data, as the phone does not get service, only WiFi.

View 12 Replies View Related

Routers / Switches :: Where Is The Icon On Applications Pinholes And DMZ

Jul 21, 2012

I was looking on YouTube to make my own server, the person said, "then go to Applications, Pinholes and DMZ click on it..." So I did it but did not see it what happened to it

View 1 Replies View Related

Cisco Security :: NAC 4.8.2 Checks Using Applications Hash Value

Aug 14, 2012

Is there any other way to configure the checks using the hash value of an application instead of register key ???  I have read and confirmed that the hash value does not change never. Its the same value....But I did not find a way to configure the rule on the CAM.... ?  By the way I am using Cisco NAC 4.8.2

View 3 Replies View Related

Cisco Firewall :: ASA 5510 - Web Applications In HTTP

Apr 17, 2011

when I connect to VPN with ASA 5510, can not connect to web applications in HTTP instead https in other applications are working properly. how can I fix this?

View 2 Replies View Related

Bind Applications To Allocated IP Addresses On Windows Server?

Oct 29, 2012

I have a server running Windows Server (can be 2003 or 2008 if it matters). The server has multiple IP addresses allocated to it.I want to use the IP addresses *as if they were remote high anonymous proxies*. I want all traffic to and from each application to use the same IP address and I want to be able to add the IP addresses to applications in the same way I would a remote proxy (presumably using ort)So for each ort address traffic travels like so:

application <-> localhost <-> internet facing IP address <-> remote site

Is this even possible? I know I can do this using a seperate Linux VPS running squid but I'm curious as to if it can be done on one server running windows.

View 3 Replies View Related

Lenovo G580 BSOD On Using Firewall / Net Monitoring Applications

Dec 3, 2012

LENOVO G580 - i5,4gb ram, 500gb harddisk , network adapters- atheros ar8162 pcie- fast ethernet controller, broadcom 802.11n network adapter.i am using quickheal total secutity for a total antivirus protection.My problem is that whenever i connect my laptop using a d-link crossover cable to connect to my desktop the connection establishes successfully but on browsing or copying data the system gives a bsod error.initially i didn't got a clue as to what causes the error but then i figured out that uninstalling q-heal solves the problem an reintalling it again causes the same problem.ive tried using different versions/products of qiuckheal but all end up generating a blue screen error.not only this , whenever i use a software that has some thing to do with network like monitoring appliction wise bandwith or something it also ends up in bsod.

View 5 Replies View Related

Cisco VPN :: ASA 8.4 - Access Citrix Applications On Customers Server?

Jun 5, 2011

We're trying to access Citrix applications on customer`s server, but the error message attached pops up every time I try to access any application. Actually, this is the same error message when we try to use ssh protocol. I'm pretty sure I have loaded all the plugins for this. All the other functionalists are ok for this equipment.

View 1 Replies View Related

Cisco WAN :: 6509 - Applications Fail Riding SPA-1XCHSTM1 / OC3

Jun 7, 2011

We have a SPA-1XCHSTM1/OC3 installed in a SIP-200 in a 6509. There are approximately 50 T1's riding the OC3.
We have two applications that fail when run from two different remote sites riding T1's that ride the OC3.Both applications involve access to external Internet sites.One establishes a VPN to AT&T's network. The other connects to a credit card transaction service.
We've run the applications from our central site successfully which means their traffic goes through our firewall and our ISP.We replaced the T1 to one remote site with another that does not ride the OC3. Both applications work riding that new T1.
Cisco says there is no newer firmware for the SPA-1XCHSTM1/OC3 than what we are currently running: [code]We would prefer all our T1's come in through the OC3 but until we get a fix for the buggy OC3 that is not possible.

View 3 Replies View Related

Cisco Routers :: RV220W - Setup To Run Applications Remotely?

Jan 14, 2013

I just purchased and installed a RV220W router.  I bought it specifically for the VPN capability.  After successfully setting up the QuickVPN and connecting, I am confused about how to setup the router (if possible) so I can run applications remotely.  Is this possible with the RV220W and if so, is there documentation to guide me in the right direction?

View 5 Replies View Related

Sharing Software Which Shares Multiple Applications In Windows To Various Clients?

Jun 8, 2011

I am trying to make an application sharing software which shares multiple applications in windows to various clients. My idea is to modify VNC code and use it to share applications on different ports to different clients.

View 1 Replies View Related

D-Link DIR-615 :: Opening Ports For Server Applications Like Ventrilo / Filezilla?

Mar 10, 2011

I've installed XAMPP on one of my Vista computers, and intend to use it as a server.  The internal IP address of the server is A.B.C.D.  The internal IP address of the DIR-615 is A.B.C.E. says that external address of the server is F.G.H.I (and so is everything else inside my network).  I have Filezilla listening on port 21.  I've turned Windows Firewall completely off on the server, and my ISP (Time Warner / Road Runner) says that they never block any port.I tried going to the DIR-615 using Port Forwarding, and set ports 21 & 90 to forward to A.B.C.D, for both UDP & TCP, Allow All, Always.  That didn't work.I tried going to the DIR-615 using Virtual Server.  I set a virtual server on port 21 to A.B.C.D, for both UDP & TCP, Allow All, Always.  It made me turn off Port Forwarding, and it wouldn't let me use both 21 & 90 on the same rule, so made two rules.  That didn't work either.

I tried setting A.B.C.D as a DMZ host.  That still didn't work.I can ftp connect into A.B.C.D from one of the other computers in the network.  People outside the network can't connect to F.G.H.I.  I can't connect to F.G.H.I. from inside the network. The same is true of Apache (but ports 80, 81 & 443), Ventrilo (but ports 3784 & 6100) and MySQL (but port 3306).  I figure that FTP is the easiest to test, so I've been just trying to get that to work.In FileZilla Server Options, I am bound to *, I have no filters, and my passive mode is set to "Retrieve external IP"As far as I can tell, if I've ruled out anything inside my network (by connecting internally), and I've ruled out my ISP (they don't block), then it must be the router.  I think I've done port forwarding according to [URL], and it seems like it should be easy, but I've been trying forever and I can never get it to work.

View 3 Replies View Related

D-Link DIR-825 :: Unable To Connect Through External IP Back Into Server On Applications?

Aug 7, 2011

Just updated to the 1.01 firmware on my DIR-815 and now it doesn't handle loopbacks anymore.

For instance, I have a dyndns address of  This points to my router.  Works fine if you're NOT within the router's internal network, ie, outside hosts can get in just fine (try it... http://  , you'll see an IIS7 welcome screen)

However, when INSIDE the network, the requests don't get connected properly, and they used to... ie, I work with code, so my svn repo is at but inside my network it doesn't connect properly anymore (whereas it used to before firmware update)

So now I wish I could back-peddle to 1.0 firmware.

View 6 Replies View Related

Linksys Cable / DSL :: X3000 - Unable To Update Applications Using Appstore

Nov 4, 2012

After upgrading the firmware of the router from 1.0.01 to 1.0.04 I have been unable to update my apps through the app store, nor login sucessfully to sites such as 4shared (on all computers and phones in the network). 

View 9 Replies View Related

Linksys Wireless Router :: X2000 Not Downloading Applications With Android Phone

Jan 14, 2013

I did an upgrade to my firmware on the x2000 dsl router and now i cannot download apps with my android phone, i have tried everything that i can think of.

View 7 Replies View Related

Cisco Firewall :: ASA5500-x Bandwidth Control Based On Different Users And Applications

Sep 20, 2012

I would like to know about asa 5500-x. Does it supports application visibility and granular control for different applications. Moreover bandwidth control based on different users and different applications

View 1 Replies View Related

Cisco Switching/Routing :: 2950 / 3560 / Chart To Show What Modules Will Fit What Switches For Fiber Applications

Dec 12, 2011

Is there a chart to show what modules will fit what swithches for fiber applications ex 2950 and 3560 switches

View 1 Replies View Related

Cisco Switching/Routing :: 881 Blocking Peer To Peer Applications On LAN

Feb 13, 2013

I am facing issues in blocking Peer to Peer applications in LAN. I am using 881 Cisco router and below is the config done. [code]

View 1 Replies View Related

Cisco VPN :: ASA 5505 - Site To Site Slow Applications

Nov 12, 2012

We have one office and one construction site. The construction site connects to the office through site to site VPN but the applications used on the construction site goes very slow!
There is a Cisco asa 5505 at the construction site and a Pix Version 6.3(5) at the office. The ISP line is 100Mbit fiber at both locations. Speed check shows 80 m bit/s at the construction site and when my constructors pings the local servers the response time is about 10 ms. There is only small amounts of data that is going through the tunnel.Are there some limitations in the site to site software that is causing this? It is strange that it is so slow when speed check shows good result and ping shows good result.

View 4 Replies View Related

GPS Tracking Device / Gps Device Without Screen Or Applications?

Feb 11, 2013

The problem: I need to track a bus from city to city in real time.I'm thinking of a gps device without screen or apps, it only sends the current location to a server. Is this possible? What device can be useful?

View 1 Replies View Related

Cisco :: WCS 7.0.172 Will Not Start

Jun 21, 2011

My WCS quit, apparently after the server was rebooted following Microsoft updates while I was on vacation earlier this week.
 WCS 7.0.172
Win Server 2003 R2 on VMware
<6GB of 50GB disk space used.
After stopping WCS & rebooting:Health Monitor is running with an error.WCS is stopped.Database server is stopped Apache server is running After attempting to restart/start WCS:Health Monitor is already running.This was a clean install/upgrade a few weeks ago.  7.0.172 wouldn't install on top of the previous version so I had to uninstall, install and restore.  WCS had been solid ever since.

View 10 Replies View Related

Broadband :: Unable To Start Rpc

Mar 19, 2012

How do you enable Window XP RPC,Had W32Blaster.worm and cleaned system, however Internet will not load lack of RPC ,Message; no or low connectivity.

View 9 Replies View Related

Cancel Linksys And Start Over?

Mar 30, 2011

I had to reboot my laptop and reset my wireless. Now I cannot sign on unless I am on the desktop connected to the router. How do I start over and reconfigure. I have another desktop and a laptop that I need to have access for internet.

View 1 Replies View Related

Intel PWLA8391GT Will Not Start?

Jan 24, 2013

I disabled my Intel PWLA8391GT because i wanted to test the onboard network, was not happy with the onboard network so i tried to switch back by enabling the drivers... well it then had a little yellow triangle with a ! in the middle it then told me that it could not start... I then restarted my computer and when i started it was in the unknow as pci device i then installed the drivers manually and it ran into the problem again..

View 1 Replies View Related

Code 10 - This Device Cannot Start

Mar 30, 2011

I just got a new server for hosting, installed Windows Server 2008 R1, and it installed correctly with no errors. First time running it, everything is plugged in, and there ethernet would not pick up at all. Went to Device Manager and got: "This Device Cannot Start. Code 10"Tried different cables, I even swapped the network switches (clearly wasn't the problem). More information can be supplied if needed.

View 3 Replies View Related

Copyrights 2005-15, All rights reserved