Linksys Wireless Router :: WRt610N Disk Storage File Format?
Mar 25, 2012
I have a 1 TB external drive plugged into my WRT610 and want to access the drive from both Mac and PC. I recently upgraded the Mac to Lion and they no longer enable Time Machine to back-up to a network attached drive (Ugh!). I thought a simple work around would be to clone the drive, but the FAT file format does not allow a file size greater than 4 GB. So I seem stuck.Can the router be configured to enable exFat file format for storage? I have the back-up drive in an obsecure location (this is why I want to access the drive over the network) and would hate to relocate the drive to a more visible location.
View 1 Replies
ADVERTISEMENT
Jul 1, 2011
Is it possible to have 2 hard drives connected to a WRT610N perhaps connected through a USB hub?
View 1 Replies
View Related
Aug 7, 2011
I looked around on the forum here for info, but couldn't find anything. I am attempting to hook up a Drobo to my WRT610N and it doesn't show up under the router setup page. I have updated to the latest firmware.
View 4 Replies
View Related
Mar 26, 2012
I am using Window 7 and the WRT610N router. I got a bufflao 1 TB USB harddisk connected to the router.My PC can access to the Harddisk. However, but my pc showing the USB harddisk is full. I checked, there are less than 200GB file on the disk. why is that?
View 1 Replies
View Related
Mar 4, 2012
I am uable to access my files on the USB Storage Device connected to WRT610. Its configured properly. I can see the drive on my network. When I double click it asks for password which I enter and it takes me to the shared folder. But when I click it it says Not Accessible....You donot have the persmission. FTP works fine.I have noticed that on the disk page in the Shared Folder Area when you click on the Summary, the box with Groups With Access is Empty. Whereas on the FTP area in the same summary it clearly mentions the admin group.I have tried every thing including factory reset, hard reset, using new group, new user name etc..The technician from Linsys even spent an hour on my computer and ultimately he gave up and gave me number to contact technical support.
View 1 Replies
View Related
Mar 11, 2009
On my network I have a wired PC running Vista Ultimate, a wireless g notebook running XP Pro, a wired PABT box for VOIP, an iPhone, a wireless g Mediagate MG350HD media extender connected to the TV in the lounge (about 10 metres away through 3 wooden walls) and I have a usb hard drive connected to the WRT610N router.I have only switched on the 2.4 band on the router - 5.0 band requires the client to have wireless N anyway, so since I have no wireless N devices it's no use right now?To manage my network I use Network Magic.
Problem #1. My Mediagate MG350HD keeps dropping it's connection to the network. I have tried using DHCP and a static ip for it but it still drops. The only solution I've found is toremove the blanked-out Mediagate from the network map in Network Magic, reboot the router, click 'search for new devices' in Network Magic and MOST times it will redetect and reconnect the Mediagate.
Problem #2. Trying to configure the network storage device (my USB hardrive) is a pain in the arse.In the routers storage tab I cannot make sense of the folder creation. All I want to do is share specific folders and all their contents on the network. Every time I go to assign access rights and click the groups over into the access granted column and hit 'save' it puts them straight back in the access denied column. Does this have something to with permissions on my PC? When I go into Network and Sharing Centre it now displays 'Network Storage', when I click into it 3 networked folders appear, when I try to set permissions on these folders I hit apply and the boxes I've just ticked blank-out again. The folder marked 'Network Hard Drive' (the one I set-up using the storage tab in the router) does not display the subfolders and the actual movies stored on them. When I try to change the persmissions on the using my PC, different folders, eg Movies, TV etc... I get the same blanking out of the tickboxes on 'apply'.Is there a step-by step graphical instruction I can follow other than the PDF that came on the disk with the router.
View 9 Replies
View Related
Mar 10, 2011
I'm trying to share all of my Itunes media (music, movies, apps, etc.) between three PC's. I have created a share of the entire hard drive which I have mapped on all three computers. Basic connectivity seems to be working fine. From each computer, I am able to read and write to the disk. In Itunes however, I created a library including everything I want to share, but Itunes is unable to save the library.When I check security options on the hard drive, I see that it is owned by an unknown user and I am unable to change ownership of the drive. The owner is listed as "Account Unknown S-1-5-21 plus a long string of numbers) I think that if I can take ownership of the drive, I can get iTunes to save the library. how I can change the account ownership of the storage drive? Trying to change ownership properties, I get an access denied message.When the drive is connected to a PC via USB, I am able to change its ownership, but it reverts back to the Account Unknown owner when connected to the router. All three computers are running Windows 7 64bit.
View 5 Replies
View Related
Dec 30, 2008
I just got the WRT610N and I really like it so far, I'm playing with the NAS option and I can't get it to create any new users or groups. I click on the link, fill out the form and click on 'modify user' (The set-up guide has a button there for 'save settings') and nothing gets created. I tried this several times and there are no new groups or users. I checked the storage.info file and there is no additional users or groups there either. I think I can edit that file but I'm not too sure what these last 2 lines mean
nas_login@admin:admin:admin: off guest:guest:guest: onusers_content@admin:admin:admin:admin: off guest:guest:guest:guest: on
View 8 Replies
View Related
Feb 27, 2012
I have WRT160NL with Firmware Version: 1.0.02. After 3 days of trying to connect my WD Elements 3TB I succeeded with 2 partitions of 1TB and one of 700 Gb not visible from router. I'm ok with that. The problem now is when I copy my files. I'm trying to create TV Series library for my Apple TV. Everything is working fine except the size of the files. When I'm copying files from PC USB they are corrupted on the network storage and not accessible. When I'm copying one file of size 350 Mb on the Network Storage via WIFI working fine but is saved with size of 2,7 Gb.
View 6 Replies
View Related
Jan 23, 2012
I have wrt610n that i have wd 1 tb drive hooked to usb port and when i try to copy large folder/files to it, i get the dreaded- cancel, try again skip and it locks up solid. i have treied all settings in these and other forums. i have tried two different brand size hard drives, i have tried wireless and wired and nothing. is there a fix for this. i have latest firmware on everything, i have everything set tweaked best as they can and not one things makes a differance. all i get from linksys is try this try that. is there a way to copy large files to hd first via the pc then hook back to the router to see the files?
View 1 Replies
View Related
Mar 31, 2011
I've owned the Rev A DIR-655 for years and have loved it, but recently it started acting up. I have a complicated setup saved as a gateway settings file (.gws). I decided to purchase a new DIR-655 for the ease of importing my settings without having to manually setup again, however, much to my dismay, the new file format for the configuration settings on the Rev B is not .gws but rather .bin. The .gws file will not import. I tried changing the file extension to .bin with hopes it might import but no luck. I also found the utility which decrypts the .gws file into .xml and used those values to manually re-enter the settings into the Rev B router, but my port forwarding is not working the same. I was wondering if there is any utility to convert the .gws file to the .bin file in order to import into the Rev B router, or if not, can I still purchase the Rev A model somewhere. The online shops I've checked do not list the hardware version.
View 7 Replies
View Related
Jun 22, 2011
How can I convert exe file to sis format.
View 1 Replies
View Related
Jul 2, 2011
I was having major issues with a 5505 (too long a discussion to go into here) so I formatted the disk and uploaded fresh binaries and recreated my configuration. I noticed the licenses were preserved. I also noticed there were several fsck records after the format that were reclaiming lost chains. I suspect the flash on this ASA is going bad, since everytime it boots it says "reading from flash ..!!" like it cannot even read flash successfully. When I purchased this one new, it also had several fsck records being brand new. I'm going to open a case on these flash issues/questions.
Anyway, after all of the above, the only thing that is not working is the botnet filter. [code]
View 4 Replies
View Related
Jun 16, 2011
Is there a way where I can just export the clients from one server and restore them onto another?
Is tehre maybe a way to convert the dmp file to another format, like csv, then modifying it and converting back to dmp?
View 3 Replies
View Related
Aug 23, 2011
in RME->Software Management-> Software Distribution -> By Devices [advanced], what is the file format we should have here, when we try to deploy many IOS images at once?
View 1 Replies
View Related
Sep 21, 2011
Network Resources - Network Devices and AAA Clients- File Operations - Add - gives me File Format Validation Faliled. I am carefull to leave the header as it is. The header in the Import Template looks faulty, see attached. When exporting devices I also get the same header as attached. I also tried to change the header so its all in one column, but with same result.
View 1 Replies
View Related
Mar 26, 2011
how to copy files from hard disk to hard disk through cmd
View 3 Replies
View Related
Mar 19, 2013
I bought belkin N150 recently. I tried to configure with my ISP. They are surprised how I don't have DHCP option in the wifi configuration and asked me to upgrade my firmware. When I tried to upgrade. I downloaded the firmware from [URL] tried to upgrade. It is showing file format error.
View 2 Replies
View Related
Apr 28, 2011
How do you format the drive for this with the routers web based utility? Or do you just do this while its plugged into your PC then connect it to the router. I know how to format the drive with the web based utility using the FAT system but its limited to 4gb files.
View 8 Replies
View Related
May 27, 2013
i recently bought a new Supervisor Engine 720 WS-SUP720-3B and 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF. Once i fired it all up i got this error %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 2, power not allowed: Unknown Card Type. the System image file is "bootdisk:s72033-ipservicesk9_wan-mz.122-18.SXE6a.bin".
I have a 6509 up and running the same mods and working fine BUT the System image file is sup-bootdisk:s72033-ipservicesk9-mz.122-18.SXF7.bin. Is the boot image what is causing my isses?
View 1 Replies
View Related
Jul 8, 2013
Trying to salvage a Dell Inspiron 7500 laptop but am stopped no matter what I have tried when attempting to download non-Dell applications. I just reformatted (non-Dell) and loaded it with Win98se and then all the drivers that seemed to apply from Dell... they all loaded fine. But when I try to download drivers in a zip cabinet for my (example) Netgear wireless adapter, I get this error message, “Cannot read from the source file or disk.” This has happened with other packages also. No matter if I use a flash drive or in board CD/DVD or the out board USB CD/DVD.One blog said they tried this tool called “long path tool,” to overcome the problem, however, I cannot get it to load either and get the same message. # 1. This computer has half a gig of memory in it, so is that the problem? 2. Will a wireless adapter even work in this machine? I would gather updates by using a hard line but I have high speed Ethernet and this only has a dial-up phone line connection built in. A couple other points that are probably important to share the battery is dead and I have not looked in the bay yet to see what happened. Secondly the screen when I move it to a certain angle it shuts off (it is not touching the button), seems to be a loose connection.
View 3 Replies
View Related
Sep 8, 2011
what is the recommended format of the attached HD drive, 512 or 4K ?
View 6 Replies
View Related
Aug 14, 2011
I just wanted to know if it's possible to playback mkv's either 720p or 1080p using the media server built in to a E4200 and streamed to a ps3? Everything is setup, the ps3 can see twonky, and has access to the external HD connected to the E4200, but upon choosing any type of mkv all i get is unrecognized format.... Avi's and mp3's all seem to be okay, as does iso's. Only I thought I read somewhere that it supports streaming HD material. p.s. the E4200 came with the latest .13 firmware. although I didn't put it on there, as I picked it up cheaply as it was a returned unit to the store.as this is supposed to be an upgrade from a wrt54gr that was used with ps3mediaserver, but struggled with 1080p's.
View 6 Replies
View Related
Jul 6, 2012
How do i copy the configuration file from a switch to a storage device (USB)
View 1 Replies
View Related
Feb 9, 2013
is file storage of a small business referring to a file server?
View 1 Replies
View Related
Sep 23, 2012
I plugged in a 2TB external USB drive and restarted the router. The Disk Management tab appears blank, doesn't give option to format.
View 4 Replies
View Related
Jan 5, 2013
I Bought a WET53G Vers. 1.1, Long Ago, Now I can't Find the Setup Disk?
View 4 Replies
View Related
Oct 19, 2012
Firmware is 1.0.05 (didn't work on 1.0.04 too). It has a single partition formated as ntfs, any hint why it doesn't work or diagnostic I could do?
View 2 Replies
View Related
Jan 2, 2012
I got my NTFS formatted drive to work with the E4200 router via its USB port.I do not see any 'Access' option to configure different access types based on users. I do have users configured in the Administration tab; these are what came per-configured on the router.
View 4 Replies
View Related
Feb 10, 2009
I purchased the WRT54GS and I followed the instructions from the setup disk. It got to step 4 and then just sat there for a while and said there was an error newrouter or gateway not detected. I kept trying it but I cant seem to get it to work. What can I do to make it install?
View 9 Replies
View Related
Jul 19, 2011
I have connected a Seagate Free Agent 500GB to the USB port of my E4200 and while it does work fine, When the drive has been idle for a while, it goes into power saving mode, turning the spindle motor off. This means it takes a few seconds to access the disk. Not a problem, but apparently, those few seconds are enough for either Windows or the E4200 to decide that the disk is no longer accessible. The share is still available, but I get missing folders and files, files won't open or are not found, and backups job with Acronis True Image will fail because it thinks the share is unavailable.Sometimes, constantly refreshing the view and opening files at random will revive the share, but often, the only way to get it back is to restart the computer.
The problem is definitely related to the power saving. If I leave a video clip playing or similar, so there's always some disk access preventing the drive from entering power save mode, it works fine. But 15-20 minutes of no disk activity immediately causes problems.
View 3 Replies
View Related
Jul 29, 2012
I updated my E3200 to 1.0.04 to try to resolve a wireless dropping issue. Now the connected USB storage no longer responds correctly (very delayed if connecting at all). When I try to provision new storage via the routers admin page, I do not get the permissions page.
View 9 Replies
View Related
Feb 8, 2012
I am a avid fan of Linksys routers i blindly go buy it. But one feature which i feel isn't there on linksys is the ability to start downloads on the router and also peer to peer capability such as torrents. Asus routers have this and it works flawlessly love to have this feature on the Linksys routers. This is one and only request i ask for in firmware update?
View 1 Replies
View Related
