Linksys Wireless Router :: WRT610N Storage Link User / Group Creation?
Dec 30, 2008
I just got the WRT610N and I really like it so far, I'm playing with the NAS option and I can't get it to create any new users or groups. I click on the link, fill out the form and click on 'modify user' (The set-up guide has a button there for 'save settings') and nothing gets created. I tried this several times and there are no new groups or users. I checked the storage.info file and there is no additional users or groups there either. I think I can edit that file but I'm not too sure what these last 2 lines mean
nas_login@admin:admin:admin: off guest:guest:guest: onusers_content@admin:admin:admin:admin: off guest:guest:guest:guest: on
View 8 Replies
ADVERTISEMENT
Jul 1, 2011
Is it possible to have 2 hard drives connected to a WRT610N perhaps connected through a USB hub?
View 1 Replies
View Related
Mar 26, 2012
I am using Window 7 and the WRT610N router. I got a bufflao 1 TB USB harddisk connected to the router.My PC can access to the Harddisk. However, but my pc showing the USB harddisk is full. I checked, there are less than 200GB file on the disk. why is that?
View 1 Replies
View Related
Mar 4, 2012
I am uable to access my files on the USB Storage Device connected to WRT610. Its configured properly. I can see the drive on my network. When I double click it asks for password which I enter and it takes me to the shared folder. But when I click it it says Not Accessible....You donot have the persmission. FTP works fine.I have noticed that on the disk page in the Shared Folder Area when you click on the Summary, the box with Groups With Access is Empty. Whereas on the FTP area in the same summary it clearly mentions the admin group.I have tried every thing including factory reset, hard reset, using new group, new user name etc..The technician from Linsys even spent an hour on my computer and ultimately he gave up and gave me number to contact technical support.
View 1 Replies
View Related
Mar 11, 2009
On my network I have a wired PC running Vista Ultimate, a wireless g notebook running XP Pro, a wired PABT box for VOIP, an iPhone, a wireless g Mediagate MG350HD media extender connected to the TV in the lounge (about 10 metres away through 3 wooden walls) and I have a usb hard drive connected to the WRT610N router.I have only switched on the 2.4 band on the router - 5.0 band requires the client to have wireless N anyway, so since I have no wireless N devices it's no use right now?To manage my network I use Network Magic.
Problem #1. My Mediagate MG350HD keeps dropping it's connection to the network. I have tried using DHCP and a static ip for it but it still drops. The only solution I've found is toremove the blanked-out Mediagate from the network map in Network Magic, reboot the router, click 'search for new devices' in Network Magic and MOST times it will redetect and reconnect the Mediagate.
Problem #2. Trying to configure the network storage device (my USB hardrive) is a pain in the arse.In the routers storage tab I cannot make sense of the folder creation. All I want to do is share specific folders and all their contents on the network. Every time I go to assign access rights and click the groups over into the access granted column and hit 'save' it puts them straight back in the access denied column. Does this have something to with permissions on my PC? When I go into Network and Sharing Centre it now displays 'Network Storage', when I click into it 3 networked folders appear, when I try to set permissions on these folders I hit apply and the boxes I've just ticked blank-out again. The folder marked 'Network Hard Drive' (the one I set-up using the storage tab in the router) does not display the subfolders and the actual movies stored on them. When I try to change the persmissions on the using my PC, different folders, eg Movies, TV etc... I get the same blanking out of the tickboxes on 'apply'.Is there a step-by step graphical instruction I can follow other than the PDF that came on the disk with the router.
View 9 Replies
View Related
Mar 25, 2012
I have a 1 TB external drive plugged into my WRT610 and want to access the drive from both Mac and PC. I recently upgraded the Mac to Lion and they no longer enable Time Machine to back-up to a network attached drive (Ugh!). I thought a simple work around would be to clone the drive, but the FAT file format does not allow a file size greater than 4 GB. So I seem stuck.Can the router be configured to enable exFat file format for storage? I have the back-up drive in an obsecure location (this is why I want to access the drive over the network) and would hate to relocate the drive to a more visible location.
View 1 Replies
View Related
Mar 10, 2011
I'm trying to share all of my Itunes media (music, movies, apps, etc.) between three PC's. I have created a share of the entire hard drive which I have mapped on all three computers. Basic connectivity seems to be working fine. From each computer, I am able to read and write to the disk. In Itunes however, I created a library including everything I want to share, but Itunes is unable to save the library.When I check security options on the hard drive, I see that it is owned by an unknown user and I am unable to change ownership of the drive. The owner is listed as "Account Unknown S-1-5-21 plus a long string of numbers) I think that if I can take ownership of the drive, I can get iTunes to save the library. how I can change the account ownership of the storage drive? Trying to change ownership properties, I get an access denied message.When the drive is connected to a PC via USB, I am able to change its ownership, but it reverts back to the Account Unknown owner when connected to the router. All three computers are running Windows 7 64bit.
View 5 Replies
View Related
Mar 6, 2007
Has anyone managed to access the Storage Link from the internet on the WRT350N router? I am on my second one and it still doesn't work. Also the configuration restore does not work either.
View 9 Replies
View Related
Sep 29, 2011
I'm running a Windows Server 2008 Enterprise Edition server that is currently the domain controller, and a Windows 7 Ultimate client. I have a 'Test' user for messing around with group policy - anyway, on the client Start Menu it has 'Test User' which leads to some form of libraries folder. Is it possible to restrict the link without removing their name?
View 3 Replies
View Related
Apr 11, 2012
I could not find any report in ACS 5.3 which gives details on user creation and deletion in ACS. This feature was there in ACS 4.x but it seems not provided in 5.3 version.
View 3 Replies
View Related
Aug 29, 2011
We want to set up a wireless user group in our town between a few friends and new people who are interested to join. As far as I heard I don't need a ICASA License for the 5.8GHz Frequency if we are using it for a non profit orginization, so we may use that.
1 x Routerboard
3 x Radio Plugin Boards
3 x 120degree Antennas
to set up a 360degree HS (Highsite).Then at each person's house we will need:
1 x Routerboard
1 x Radio Plugin Board
1 x Whichever Antenna
Is that correct? Then also if we wanto run VoIP on our network, how do I do that? Basicly we want to use it for gaming, file sharing and VoIP. No Internet of anything else.
View 2 Replies
View Related
Jul 29, 2012
I updated my E3200 to 1.0.04 to try to resolve a wireless dropping issue. Now the connected USB storage no longer responds correctly (very delayed if connecting at all). When I try to provision new storage via the routers admin page, I do not get the permissions page.
View 9 Replies
View Related
Aug 5, 2011
Now that the firmware update allows us to plug a printer into the E4200, is there anyway to simultaneously enjoy network storage AND a USB printer?
View 1 Replies
View Related
Feb 13, 2013
I have the N900 model and would like to connect a hard drive via usb. The router can see the external hard drive but the problem I run into is the HD uses a password to open it.
View 7 Replies
View Related
Jul 3, 2012
I have a 1TB Western Digital drive connected to my home EA4500 router. Connecting to media server using SMB protocol (192.168.1.1) works fine. I am moving abroad for an extended amount of time, though, so I would also like to connect to this USB drive using FTP. Using the new Cisco Connect Cloud interface, I have enabled FTP sharing for the USB storage device with port 21 and using standard UTF-8 encoding. Whenever I try to connect to the FTP server using my router login credentials, I get the following error message:"There was a problem connecting to the server xx.xxx.xxx.xx. This file server will not allow any additional users to log on. Try to connect again later"
View 9 Replies
View Related
Aug 21, 2012
When I connect my WD My Book Essential 3TB (which is listed as officially compatible with the E4200), I get the following screen:
The E4200 does not detect my hard drive, nor is there a bar saying "detecting".
My problem started when I could not create any new folders through finder. I had to store new files in the root folder. Every time I entered the admin password, I got a message saying I did not have sufficient permission to perform such a task. I then went on to create a new user within the admin group and continued getting the same message. Finally, I formatted the drive directly through my computer and reconnected. And now my HDD is not detected at all.
I have an iMac running OS X Lion. The HDD is question has been formatted to Mac OS extended (journaled).
View 2 Replies
View Related
Apr 28, 2013
I have an e4200v2 with latest firmware. I have changed the administrator password from "admin" to a password of my own.I have recently added a USB hard drive to the router, and it says that admin password to access the share drive is the same as the admin password as the router, but it is not. The password to acces the USB drive is "admin" and there is nowhere to change this password to something secure.
View 5 Replies
View Related
Jul 17, 2011
I have my WRT350N setup. all computers within my LAN can access my usb storage device. I can not access my usb storage device using a computer outside my LAN.
if you log on to 99.225.89.229:8080 it will ask you for user id and pass word to log into my router.
if you try to log on to 99.225.89.229:21 it wont even connect asking you for a user id and password.
my guess is the router is not allowing port 21 to be accessed, but I'm not sure.
View 2 Replies
View Related
Mar 26, 2013
I have TV set box connected to modem router supplied by ISP provider. To the same router I connected EA 4500 to which I wired connected Network Hard Disc at which I store music, photos and films, which I can not access via TV set box. If I connect Hard Disc direct to the modem router to which set box is connected, access works fine.
Whar shall I do to establish accesability of Network Hard Disc over all network ?
View 1 Replies
View Related
Mar 13, 2012
My router usb storege was working fine with my old videos and streaming fine too but now im putting some new videos on the usb storage my router its not showing the new videos on the usb storage.
View 2 Replies
View Related
Feb 16, 2012
I have a Maxtor 160Gb external HDD and want to use it as a network drive.So I go to the routers login page and choose for storage to set it up. I did this once and because I wanted to change a few things I deleted the share and changed the users and usergroup that I've made.Now I can't created a share anymore, also tried another disk(flashdrive) nothing seems to work.The only thing I didn't do is reset to factory default, but that's the last thing I want to do.I use the E3000 router with firmware 1.0.04
View 2 Replies
View Related
Jan 11, 2012
I got E4200 with latest firmware (updated two days ago) and WD Studion with 2 Tb drive (it is HFS+ file system)Once I connect this drive to router I am not longer available to access 192.168.1.1.
View 5 Replies
View Related
Dec 27, 2011
Just bought router and installed. I cannot create share in Storage settings in Advanced settings. I hit Create Share and it brings up the dialog box where I enter the display name. Share entire partition is checked already. I save settings and I see the box going to the form where you assign the Group roles, but then the box disappears and closes. All I see is the original Storage setting page with the Create Share button still there.I tried this on Win 7 using both IE8 and Chrome browsers.
View 4 Replies
View Related
May 29, 2012
The USB storage drive is not found when I attempt to map the drive on my Mac Mini Lion OS, it is not found. My question is, does the wrt160nl storage feature work with Mac OS? I have upgraded firmware to 1.0.0.3 and latest version of Lion
View 2 Replies
View Related
Apr 10, 2013
Just got my Linksys EA4500 router today.The only confusing thing, not not well explained by Linksys . Is the USB storage set up.One thing (very important) Linksys has failed to explain how to gain access to the USB storage once connected to the router. Once the USB storage drive it set up. Or at least I think it's set up. Nothing shows up on my network page. So how am I to get access to the drive? If it don't show up?I need to know how to gain access to the USB storage drive that is connected to the Linksys router.
This is how I think it is to be set up. Again the instructions are not all that clear how to set up. And where is this widget on the homepage to be located?
View 4 Replies
View Related
May 8, 2011
E3000 can see only 1TB Maximum. I have a 3TB WD storage and E3000. I have upgraded also to latest E3000 firmware version.
View 3 Replies
View Related
Dec 6, 2011
I have Linksys e3000 , I used the web interface to set up the storage. I also from the Administration option of the Storage inside Web Interface changed the netbios name or Device name to the one I like. Now the name does not resolve to the ip address. It used to when I had recently unpacked. I can still access my drive by IP address.
View 3 Replies
View Related
Sep 13, 2011
does e4200 have cifs support. I ask because I have a hard drive connected thru the usb and trying to setup nas storage. But for the hp touchpad to mount it it needs cifs I guess.
View 1 Replies
View Related
Dec 25, 2009
I purchased a WRT610N router early this month, the wireless network was working completely fine when I first set it up. Today I tried to connect my laptop to my wireless network. The laptop isn't able to connect at all. I also got a Sony PSP which has WLAN on and that saying it cannot detect any access point which would be my router.
View 3 Replies
View Related
Jul 12, 2011
How can I open the Nat for both systems on my single router.
View 2 Replies
View Related
Jul 26, 2011
I was told that this router would push the PoE to the WAP4410N. I hooked the AP up to port 1 and no lights or anything... The network is all cat6, patch cords are cat6 shielded if this matters at all... what am I missing.
View 3 Replies
View Related
Dec 20, 2011
I have the Linksys WRT610N wireless router and would like to know if it is possible to block all domains ending in .XXX? The access restrictions let you type in a 'specific' URL, but using a generic domain name doesn't seem to work. I basically want to block all access to any URL that ends in .XXX.
View 5 Replies
View Related
May 13, 2012
I just bought a certified refurbished router. The model is WRT610N-RM. Where's what I've done:
1. Downloaded newest firmware from the site using old router, Then disconnected. Connected a lan cable to the new router. Powered up the router. Held down reset untill the light blinks. Went to the browser and typed 192.168.1.1. Entered password to go into router and upgraded firmware. 2. 5 Ghz Settings: Went to Wireless menu. Selected "manual", mode is "mixed" (If i chose N only for 5 Ghz, then It won't save my setting for internet security. Instead it will be "disable" no matter what". The rest was default. SSID is enabled. Then I set up the 2.5 Ghz. I have 3 other computers with N wireless card. Some others have G, however when I viewed available networks, I only see the 2.4 Ghz ssid. I tried to reboot and unplug power for 10 seconds, but no luck seeing the 5 Ghz.
View 6 Replies
View Related
