Linksys Wireless Router :: E4200v2 Cannot Create Storage Share
Dec 27, 2011
Just bought router and installed. I cannot create share in Storage settings in Advanced settings. I hit Create Share and it brings up the dialog box where I enter the display name. Share entire partition is checked already. I save settings and I see the box going to the form where you assign the Group roles, but then the box disappears and closes. All I see is the original Storage setting page with the Create Share button still there.I tried this on Win 7 using both IE8 and Chrome browsers.
View 4 Replies
ADVERTISEMENT
Feb 16, 2012
I have a Maxtor 160Gb external HDD and want to use it as a network drive.So I go to the routers login page and choose for storage to set it up. I did this once and because I wanted to change a few things I deleted the share and changed the users and usergroup that I've made.Now I can't created a share anymore, also tried another disk(flashdrive) nothing seems to work.The only thing I didn't do is reset to factory default, but that's the last thing I want to do.I use the E3000 router with firmware 1.0.04
View 2 Replies
View Related
Jan 29, 2013
I just bought an e4200 with firmware version 2.0.36 from Costco.I have set it up manually and have access to the internet for all of my wired and wireless devices.Unfortunately, I cannot access the USB storage via mounting a share, the media server or the FTP server. I have plugged in a USB storage device that is formatted with FAT32. The router detects it and allows me to create new shares in the Storage->Disk menu and Storage->Media Server menu - so I know it can read the device and see the folders. Strangely if I click "Scan All" in the Media Server, it finishes very quickly and never updates the "Last scanning time" field.There was a brief moment when the router showed up in the Network->Computer section of File Explorer, but I can't get it to show here again.
View 8 Replies
View Related
Feb 17, 2012
i used to have everything setup properly, Upnp (streaming from PS3), FTP server, Public drive. Everything was working perfect. One day, my drive stopped responsing, and because I had a Security IP camera uploading pictures on it, I thought it was full. The partition was corrupted so I formated the drive. Since then, whatever disk I plug to the router, the "create share" window is not working properly.
View 2 Replies
View Related
Dec 28, 2012
Region : Netherlands
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP :
I just bought TP-link wireless N gigabit router (model No. TL-WR1043ND). Everything is working fine except my external hard disk drive connected via usb on the router.I am using Ubuntu 12.10 and I don't know where to find the HDD.
I can see the disc in router settings but I don't know how to access it. Clicking on Open the disk does nothing and following the url file://192.168.1.1/Volume1 results in webpage not found.
I can access the External HDD with windows no problem but how do I access it in Ubuntu?
View 5 Replies
View Related
Dec 5, 2012
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.17 Build 120426 Rel.29216n
ISP : Comcast
I got my router 2 days ago and it's set up working perfectly. I was playing around with the USB funtions and want to set up a media share drive and a storage sharing. I've connected two drives A - this drive is 500GB with movies
Media Server Setting Server Name:TP-LINK_BE4914.Server Status:Started
I've shared the movies folder but when I go to another PC, it doesnt show anything when I open Media player (in the library section, only shows my ipod)for this, it sees the drive and shows a link that says open drive but when i click it, it doesnt open. i'm using chrome.i have to go to the explorer window and manually type in file://192.168.0.1/volume9/
View 7 Replies
View Related
Dec 15, 2012
Region : Canada
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.12.22 Build 120424 Rel.39632n
ISP :
I can access the USB storage via FTP, but I wanted to access files using a Windows Explorer format. Also, anyone access the Media share ? Manual tells you how to setup the USB functions but not how to access from a PC.
View 1 Replies
View Related
Jul 1, 2011
Is it possible to have 2 hard drives connected to a WRT610N perhaps connected through a USB hub?
View 1 Replies
View Related
Jul 29, 2012
I updated my E3200 to 1.0.04 to try to resolve a wireless dropping issue. Now the connected USB storage no longer responds correctly (very delayed if connecting at all). When I try to provision new storage via the routers admin page, I do not get the permissions page.
View 9 Replies
View Related
Jun 29, 2012
I think my E4200v2(Firmware Version: 2.0.37 ) should redirect to CCC as this link, is the CCC just could be used in US?
View 4 Replies
View Related
Mar 16, 2012
Recieved this E4200 as a repplacement for a v1 that kept dropping wireless connection. Now after about 1.5 months the router keeps rebooting. Tried resetting, etc...no luck. Calling Cisco now.
View 3 Replies
View Related
Mar 28, 2012
this topic has been discussed under the v1 software and marked as solved yet it has not been. Has anyone attempted with version 2 software and been able to connect after the arp was flushed?
View 6 Replies
View Related
Apr 21, 2012
Just got my new E4200 v2 router. Set up mac filtering for one device and after saving the change the router was refreshing and disconnected all my devices and could not log in to the router wired or wirelessly and had to do a factory reset. Have the latest firmware. Is this a defect in the router?
View 2 Replies
View Related
Dec 23, 2011
I will soon upgrade my wireless network from a WRT610N to an E4200v2. At setup of the router, I assume I'll be able to change the SSID of the E4200v2 and I plan to keep the same SSID as on my old router. With the same SSID as currently seen by the devices on my network
View 4 Replies
View Related
Jun 29, 2012
I have a synology DS411 and a ATV2.DS411 is always downloading from internet,normally the download' bandwidth of DS411 is around 2MB/s.In my old netgear 3800,i just need to active WMM and add a port OQS that the port connection DS411 is low.Then when I watch stream video from internet on my ATV2.I can see the DS411's bandwidth will be reduced automatic.I replaced 3800 with E4200v2 some days before,and I have done the same config ,turn WMM ,set ATV MAC to highest and DS411 MAC to lowest. But when I watch ATV2,DS411's bandwidth seems not be reduced,so I cant get the smooth video Its very bad.
View 9 Replies
View Related
Aug 5, 2011
Now that the firmware update allows us to plug a printer into the E4200, is there anyway to simultaneously enjoy network storage AND a USB printer?
View 1 Replies
View Related
Feb 13, 2013
I have the N900 model and would like to connect a hard drive via usb. The router can see the external hard drive but the problem I run into is the HD uses a password to open it.
View 7 Replies
View Related
Jul 3, 2012
I have a 1TB Western Digital drive connected to my home EA4500 router. Connecting to media server using SMB protocol (192.168.1.1) works fine. I am moving abroad for an extended amount of time, though, so I would also like to connect to this USB drive using FTP. Using the new Cisco Connect Cloud interface, I have enabled FTP sharing for the USB storage device with port 21 and using standard UTF-8 encoding. Whenever I try to connect to the FTP server using my router login credentials, I get the following error message:"There was a problem connecting to the server xx.xxx.xxx.xx. This file server will not allow any additional users to log on. Try to connect again later"
View 9 Replies
View Related
Aug 21, 2012
When I connect my WD My Book Essential 3TB (which is listed as officially compatible with the E4200), I get the following screen:
The E4200 does not detect my hard drive, nor is there a bar saying "detecting".
My problem started when I could not create any new folders through finder. I had to store new files in the root folder. Every time I entered the admin password, I got a message saying I did not have sufficient permission to perform such a task. I then went on to create a new user within the admin group and continued getting the same message. Finally, I formatted the drive directly through my computer and reconnected. And now my HDD is not detected at all.
I have an iMac running OS X Lion. The HDD is question has been formatted to Mac OS extended (journaled).
View 2 Replies
View Related
Apr 28, 2013
I have an e4200v2 with latest firmware. I have changed the administrator password from "admin" to a password of my own.I have recently added a USB hard drive to the router, and it says that admin password to access the share drive is the same as the admin password as the router, but it is not. The password to acces the USB drive is "admin" and there is nowhere to change this password to something secure.
View 5 Replies
View Related
Mar 26, 2012
I am using Window 7 and the WRT610N router. I got a bufflao 1 TB USB harddisk connected to the router.My PC can access to the Harddisk. However, but my pc showing the USB harddisk is full. I checked, there are less than 200GB file on the disk. why is that?
View 1 Replies
View Related
Jul 17, 2011
I have my WRT350N setup. all computers within my LAN can access my usb storage device. I can not access my usb storage device using a computer outside my LAN.
if you log on to 99.225.89.229:8080 it will ask you for user id and pass word to log into my router.
if you try to log on to 99.225.89.229:21 it wont even connect asking you for a user id and password.
my guess is the router is not allowing port 21 to be accessed, but I'm not sure.
View 2 Replies
View Related
Feb 29, 2012
We have the Linksys E4200v2 router. We have two servers on our network that we want to access remotely (from outside). We have two Static IPs from our ISP. We currently utilize one of those IPs to access one of the servers-no problem. How can we utilize the second IP to access the second server?
View 3 Replies
View Related
Jan 11, 2013
I have a static IP on the ATA (Linksys PAP-2T) ...the router will only pick it up occasionally...most times it does not. The ATA is on and working (I can call in/out) but I can't see how the router can't find/see it. I have added the ATA to the DHCP reseve list but still nothing. I have the port fowarded for the ATA but when I go to canyouseeme.org it comes up as "Connection timed out"...becuase I think it can't see the ATA behind the Router.
View 1 Replies
View Related
Jan 8, 2012
On the D-Link it was easy, I can see who is connected to which radio.But I can't figure out how to see who is connected to WiFi on hte E4200?I run several access points in my house, and I need to make sure htey are all working.If I can't see who, if any, is connected, I have no idea if WiFi on the E4200 is working.
View 2 Replies
View Related
Dec 14, 2011
V2.0.26.124551 is now available. I did the online upgrade and it took just a couple of minutes including the reboot. The firmware is not available as a download yet for manual install. This firmware is dated 11/14/11 so it doesn't appear to correct the Port 53 issue reported earlier.Release Date: Nov 14, 2011 Firmware version: v2.0.26 (Build 124551) - Support for the WAN L2TP and PPTP protocols
View 1 Replies
View Related
Dec 20, 2012
My ISP dynamicly assigns IP's so I have my New E4200V2 set up as Automatic Configuration DHCP. I want to be ablt to use a specific DNS server rather than the one issues by my ISP.No matter what values are in the Static DNS 1, 2 and 3 the router continues to pull a DNS from my ISp. My POS old D-link 615 was able to utilize a custom DNS server with no issues so surely ther emyst be a way to do the same on the E4200.
View 8 Replies
View Related
Dec 23, 2011
E4200v2 DMZ does not appear to work correctly?I have two e4200v2 both with latest firmware and it appears to me that the DMZ setting does not work. I continue to have to apply many port forwarding and triggering rules to make needed ports accessible.
View 9 Replies
View Related
Aug 16, 2012
I am wondering what is the optimal way to set-up my E4200v2 and PLWK400 at home? I have several devices (laptops, tablets, phones) that connect on .11g and .11n.
My current set-up:
E4200v2: 5ghz - Wireless-N only (SSID home-n), 2.4ghz - Wireless-B/G only (SSID home-g)
PLWK400: SSID home-ext (separate part of the home)
I am using WPA2 Personal security if that makes a different. One question would it be "better" to have the same SSID for all 3 wireless settings (5ghz, 2.4ghz, and PLWK400)? Would the various devices know which frequency to switch to for best speed and range?
View 6 Replies
View Related
Feb 24, 2013
I tried to upgrade my router firmware to the latest 2.1.39.145204 (downloaded from cisco website) but seems like the upgrade didn't go well. I am unable to open the admin webpage. I can get to the login page on 192.168.1.1, after i enter the admin password the next page doesn't load. It keeps showing 'Waiting' at the center of the page forever.. I have tried to do the 30/30/30 reset to no avail, i tried to do tftp downgrade to older firmware version but the tftp boot doesn't even start. Is there any other way i can either fix the current firmware upgrade or downgrade it to the previous version?
View 9 Replies
View Related
Jan 23, 2012
Where can I download the 2.0.36 firmware?I flashed it through the UI but since the factiry fw is crap I want to try the third party firmware that are available but I want to make sure there is a path back to factory version in case I need to return the product.
View 1 Replies
View Related
Aug 1, 2012
I purchased an e4200v2 to replace my old WRT160n which I have been using for years with no issues. Last night the e4200 crashed on me when I went to reset the router I noticed the CISCO light was blinking very slowly and I had no network connection. I power cycled the router and still no connection so I hit factory reset button. Nothing happened. Did a 30/30/30 reset nothing happened. At this point I have a 34 day old plastic brick on my desk and I'm back to using my old WRT160N. how to unbrick this router?
View 3 Replies
View Related
Jan 31, 2012
No problem setting up the FTP server on the router. It's working perfectly from inside the LAN. But any attempt to access the built-in server from the WAN side is fruitless. I found that if I turn off the IP4 SPI on the router, I can suddenly connect to the built-in ftp server without issue from the Internet. If the SPI option is checked, its a no go.
Is this a bug? I can't imagine that it is intentionally set up such that you have to turn off the firewall in order to use the FTP function externally. At least it isn't mentioned anywhere I can find and it wouldn't seem logical.
View 2 Replies
View Related