Linksys Wireless Router :: E3000 - Create Share Windows Is Not Working
Feb 17, 2012
i used to have everything setup properly, Upnp (streaming from PS3), FTP server, Public drive. Everything was working perfect. One day, my drive stopped responsing, and because I had a Security IP camera uploading pictures on it, I thought it was full. The partition was corrupted so I formated the drive. Since then, whatever disk I plug to the router, the "create share" window is not working properly.
View 2 Replies
ADVERTISEMENT
Feb 16, 2012
I have a Maxtor 160Gb external HDD and want to use it as a network drive.So I go to the routers login page and choose for storage to set it up. I did this once and because I wanted to change a few things I deleted the share and changed the users and usergroup that I've made.Now I can't created a share anymore, also tried another disk(flashdrive) nothing seems to work.The only thing I didn't do is reset to factory default, but that's the last thing I want to do.I use the E3000 router with firmware 1.0.04
View 2 Replies
View Related
Dec 27, 2011
Just bought router and installed. I cannot create share in Storage settings in Advanced settings. I hit Create Share and it brings up the dialog box where I enter the display name. Share entire partition is checked already. I save settings and I see the box going to the form where you assign the Group roles, but then the box disappears and closes. All I see is the original Storage setting page with the Create Share button still there.I tried this on Win 7 using both IE8 and Chrome browsers.
View 4 Replies
View Related
Dec 5, 2011
I have a Western Digital "WD 6400AAC External MYBook that I can not create shares on, nor edit the public folder. In each case, I receive the message "Error on page". I've updated my firmware, several time, to the latest build. I've formatted the my WD drive using the router and my computer, and each time I try to create a share, "Error on page" shows on the bottom left corner of the page and nothing happens. I tried several other drives and the results are the same.
View 1 Replies
View Related
Oct 20, 2010
I just bought an E3000 about 30 hours ago and just unrealistically my router now doesn't want to give me any WiFi at all. I tried reset button, tried re plugin all of my system as well as pressing for short and long period the middle button that indicates WiFi is accessible. I already bought 3 linksys routers.
View 2 Replies
View Related
Aug 25, 2011
Looking at upgrading my router to an e3000 however I've got a couple of questions. I might come across as a bit thick with this one but I have read that you need a modem to make the router work, I can't get my head around this as I've not come across this before. I always thought the router was the modem!! I've also heard that the E3000 only works with cable ISP and not ADSL, is that true?
View 2 Replies
View Related
Mar 11, 2012
I have an E3000 and I just cannot get my pogoplug NAS working with it. It shows up as it should on the local network, but cannot connect with the mothership for internet access when behind my router. I have tried stock firmware, DDWRT, and Tomato, all do not work. I have tried assigning it a static IP, DMZ, new cables, different ports, all do not work. It activates immediately with an old WRT54G in the same configuration, which is Cable modem-->Ooma VOIP-->E3000-->Pogoplug.
View 1 Replies
View Related
Aug 31, 2010
So I just setup my new E3000, upgrading from a WRT54G. The uPnP worked great on that router and my last three routers before that. Xbox never required I setup anything -- I can prove this simply by swapping routers and putting one of the old ones in place of the E3000.However, the E3000 (Firmware Version: 1.0.02) is not working with uPnP. Xbox connectivity test comes back and says that my NAT type is "Moderate". Most stuff works fine, but I'd like to get it all working. I worked with a Linksys tech who got NAT to "Open" by configuring triggered port forwarding. I am happy to have my issue resolved, but confused why uPnP didn't work? I mean it was easy for me to configure port forwarding, but for my less technical friends, should I simply not recommend this router because it can't do basic uPnP?
View 2 Replies
View Related
Jan 17, 2012
I used to have a WRT54G Router at home. I would regularly use Cisco Systems VPN Client to connect to my work router and the RDP to my work PC. (The router at work is Cisco 2811.)A couple months ago, I finally upgraded my home router to a Linksys E1000. Since that time, I have NOT been able to:1) Connect from my work PC to my home PC using Windows RDP2) Connect from home PC to VPN at work via Cisco VPN ClientIt's like the Linksys router at home an Cisco router at work refuse to speak to each other.A week ago, I finally gave up and bought a Linksys E3000. Exact same connect problems as the E3000.To test, I plugged my old WRT54G back in just to see, and lo and behold, all my connection problems go away. Plus the E3000 in again, and I cannot connect b/w home and work.A few other notes:From work, I have successfully used RDP to reach out to other test PCs (friends computers), but I can't get to my home network with the E3000 working. I also can connect to home via RDP using other internet connections, like if I'm in a hotel or airport.It's just that my Linksys E3000 at home and the Cisco 2811 at work refuse to acknowledge each other.
View 6 Replies
View Related
Dec 6, 2011
I have Linksys e3000 , I used the web interface to set up the storage. I also from the Administration option of the Storage inside Web Interface changed the netbios name or Device name to the one I like. Now the name does not resolve to the ip address. It used to when I had recently unpacked. I can still access my drive by IP address.
View 3 Replies
View Related
Jul 8, 2011
We have the E3000 Router and the guest internet access DOES NOT work. We occasionally repair other people's PC's and I seriously do not want to allow access to our home network. Recently, we are trying to access through guest, on a Win 7 Dell Notebook. It takes the passcode but no internet connection.
View 1 Replies
View Related
Dec 13, 2011
I have one desktop (win7) and one notebook (win xp).The XP is in the living room connected to the router using a ethernet cable.The win7 is in the bedroom connected the the router using wireless connection.The router I am using is Cisco Linksys E1200.I guess using calbe or wireless does not matter because they are all connected to the router anyway. So how do sharing files between these two PCs?P.S. both computers are set to WORKGROUP already, but neither one is visible to the other in Network.
View 3 Replies
View Related
Oct 3, 2011
So I recently updated my desktop to windows 7 and I have lost the CD for my E3000 router. My desktop doesn't have a wireless adapter I always had it set up on a direct connection. So I went to the E3000 support and downloaded the software on my laptop and burned it to a DVD and put it in my desktop so I could update the drivers manually and be able to connect to the internet. But it seems the software only supported wireless connections, am I just sol? Is there some way to get my desktop to update the drivers for the router?
View 2 Replies
View Related
Jul 3, 2012
There is no "blinking light" indication on my E3000 at the Internet (Yellow label) and Ethernet port no 4. I tried plugging in 2 cables at all of the ports. I got the blinking indication at Port 1 through 3. The same cable's have no response at Port 4 and Internet port. As a result my I am not able to connect to the internet.
View 2 Replies
View Related
Apr 18, 2012
I've enabled the Media Server on my E3000 router. My PS3 can see the server and play media from it by my PCs can't!
I'm using Windows Media Player v 12.0 on Windows 7 and some older version on Windows XP and it's my understanding that the Media Server should appear under the "Other Libraries" section but it does not.
Am I doing something wrong? Is there a bug in the E3000 firmware (I have the latest as of this date) or is the Media Server simply not compatible with Windows Media Player? compatible media player for Windows 7?
I did read a post about a firmware upgrade on the 4200 that broke the media player, but I don't know if such a problem exists for the E3000.
View 1 Replies
View Related
Jun 29, 2012
I can't create a network bridge in windows xp or well i can, but then my wusb600n says it is not connected, it can find networks but it wont connect to them? I tried take out the lan cable and create but with same result, is this normal that this adapter can't handle network bridge? If i make a virtual machine in Virtualbox i can use the internet, but i cant when i create a network bridge connection in windows xp..
View 5 Replies
View Related
Oct 18, 2012
I have a computer with some shared files on that I my LAN can access. However this is only on the immediate LAN The computers then all go in to a router which has NAT enabled and connects to the rest of the work network. I have opened up port 135 through 139 both UDP and TCP etc How can I add this folder as a network share on the computers outside of NAT (it even has a web address pointing to it that works for the web file server)
View 3 Replies
View Related
Aug 26, 2011
I have tried to install a usb network adapter wusb100 ver.2 under win7 x64 and win7 x64 sp1(two different machines). I have installed and downloaded the latest drivers ( Driver11/09/2009 Ver.3.0.3.0 (64-bit)). Device manager reports everything is fine, but i can't find the adapter anywhere in the Network and Sharing Center on both machines, not even if i run ipconfig it won't show up. As a result of course there is no wireless connection available. Although adapter has worked fine when tested under win7 x32. But win7 x32 is not my case.
View 1 Replies
View Related
Apr 22, 2012
I have a Linksys E3000 router set as Lan-Lan 192.168.0.2 hosting my internal LAN connected to a motorola Surfboard (Brighthouse) internet Wireless/Wired access point 192.168.0.1.I have a Web server hosting a site connected direct to the surfboard (works fine) . The FTP "site" on the E3000 can be seen by all pcs on the internal LAN. However, it can NOT be seen from the internet (Android with FTP client being used for test device)
Primary Access point 192.168.0.1
DCHP server with reserved IP addresses for server and PC's and smartphones
Port Forwarding Set for Server at 0.004 : 80
Port Forwarding Set for E3000 at 0.002 :21
Secondary (E3000) router 192.168.0.2
DCHP server is disabled
Port Forwarding is Not being used
connected to primary router LAN port 1 by LAN port 1 on E3000
All pc's can access the Internet when connected to the E3000 via cable or wireless?All pc's can access the FTP server on E3000 via cable or wireless as a LAN location (connected to either router)?How can I get the FTP to be seen from the internet ?
View 2 Replies
View Related
Jun 29, 2011
I recently bought a Cisco e3000 router. I updated the firmware but I am still only getting 1.33 Mbps at most. The only things plugged into it is my PC and my xbox. I bought the router so i could get a better connection on my xbox so netflix wont stop playback.
View 9 Replies
View Related
Apr 2, 2012
I have an e3000 that cannot obtain an address from the ISP. I can get an address on the computer and an old router by directly connecting the cable to the computer or the router. I can also daisy-chain the e3000 to the old router, and I can get an address on the e3000 from the old router. I have hard reset the e3000, changed firmware from the Linksys to TomatoUSB and back to Linksys, and I still can't get it to work. It worked fine on Saturday until a bolt of lightning hit close to the house. Since then, I cannot get the e3000 to connect to the ISP.
View 9 Replies
View Related
Jul 11, 2011
How do you set up the E3000 for ATT u-verse?
View 2 Replies
View Related
May 9, 2012
install linksys e3000.
View 1 Replies
View Related
Oct 26, 2012
I had a failed Tomato upgrade and now Connect Setup can't see router to revert back to original. I get message 82BD0101 or computer not connected to router. Also the http://192.168.1.1 trick won't work. Is there any way to restore besides 30/30/30?
View 2 Replies
View Related
Nov 3, 2012
I would like to override the DNS servers provided by DHCP via my ISP. The other settings I would like to preserve (like my assigned IP).How to achieve this with E3000 ?
View 3 Replies
View Related
Feb 17, 2011
It seems like after a certain amount of time, maybe a few days... my E3000 gets slowww.. I'm talking dog slow. And it's not just the internet, I have a media server connected to it, and usually when I put something on it, the transfer rate is about 3.5MB/s (not bits, bytes). But everything is slow, I top out at speed of maybe 1/6 normal on the internet as well.
View 8 Replies
View Related
Aug 21, 2011
We have a wireless internet service. Not satellite. We basically have an antenna on our house that picks up the signal from a tower a mile or two away. I used the e3000 router when we lived in town with broadband internet and it worked fine. I can't get it to keep a hold of a signal. I can connect to the router from the computers but the router drops the signal from the tower. I have an old router that the wireless company was kind enough to lend me that works , but the signal is weak and it could die at any moment... I"m at my wits end.. I have an expensive piece of equipment that wont hold the signal. I have updated the firmware and the Cisco connect software..
View 5 Replies
View Related
Apr 19, 2010
Has anyone tested QoS on the new E3000? Whenever I add an application (e.g. Voice Device) and set priority to Medium or High, my upstream bandwidth for everything else is immediately cut significantly, even when I'm not using the priority application.
For example, with QoS disabled, I can consistently get 10Mb upstream (speedtest.comcast.net). As soon as I enable QoS, upstream is capped to exactly 2Mb! On my old router, there was an option to set the total upstream bandwidth -- but on the E3000 there is no such option that I can find.
View 9 Replies
View Related
May 18, 2011
just bought an e3000 and want to use it with wireless internet- usb modem. when setting up it wouldnt go any further than the 'searching for connection' page as it couldnt detect a connection in the 'internet' lan (wan?) port.can i set it up to accept the wireless usb modem?
View 6 Replies
View Related
Aug 17, 2012
I lost my cd for my router e3000 any way still to use it?
View 1 Replies
View Related
Jun 26, 2011
I recently purchased an E3200 and have successfully setup a USB printer from my desktop machine. However, I can't seem to figure out how to access that same printer through my laptop. The laptop is able to connect to the internet and the appropriate printer drivers were previously loaded.
View 3 Replies
View Related
Apr 24, 2011
I have 2 pc, one with windows xp SP3, and one with Ubuntu 10.04 Until 1 month ago on ubuntu it worked via a patch founded online, from 1 month on ubuntu it doesn't work anymore. Before I used a cable for xp and wireless for Ubuntu. Now I use cable for ubuntu and I try with key usb on windows xp sp3, but doesn't work, I see led, System says that connected, but If I do ping to a site via dos terminal it doesn't work. It doesn't work also if I use internet explorer to see google, but system says connected via linksys.
So I need to solve issue with windows xp, then I hope to solve also for Ubuntu.
View 2 Replies
View Related
Feb 25, 2011
I have FiOS and their supplied wireless router Actiontec #MI424WR. I have home theater equipment that uses the newer N signal so I purchased a Linksys E3000 Wireless-N Router. I have one of the LAN outputs on the Actiontec feeding the Linksys input and Wi-Fi turned off on the Actiontec. This is working good for my wireless home theater equipment but I am having problems with my wired speed. It has gone from averaging anywhere from 20 to 30 mbps on numerous test sites when plugged into the Actiontec to averaging around 10 mbps when plugged into the Linksys.
1) Is my wireless N speed going to top out at 10mbps or less since that is all the router is showing on wired? Shouldn�t N be broadcasting a faster speed if given the ability?
2) I have my computer currently plugged directly into the Linksys verses the Actiontec. This makes it easier to program the Linksys router. Since I am no longer using the wireless part of the Actiontec there really is no need to be plugged into it. Is there anything I can do get the speed higher on the Linksys, a setting I can change? Will I have to plug the computer back into the Actiontec to get the higher speed and then move it every time I may need to make a change to the Linksys?
View 2 Replies
View Related
