Linksys Wireless Adapters :: WRT54GL And WUSB 600N V2 With Windows XP Not Working
Apr 24, 2011
I have 2 pc, one with windows xp SP3, and one with Ubuntu 10.04 Until 1 month ago on ubuntu it worked via a patch founded online, from 1 month on ubuntu it doesn't work anymore. Before I used a cable for xp and wireless for Ubuntu. Now I use cable for ubuntu and I try with key usb on windows xp sp3, but doesn't work, I see led, System says that connected, but If I do ping to a site via dos terminal it doesn't work. It doesn't work also if I use internet explorer to see google, but system says connected via linksys.
So I need to solve issue with windows xp, then I hope to solve also for Ubuntu.
View 2 Replies
ADVERTISEMENT
Aug 26, 2011
I have tried to install a usb network adapter wusb100 ver.2 under win7 x64 and win7 x64 sp1(two different machines). I have installed and downloaded the latest drivers ( Driver11/09/2009 Ver.3.0.3.0 (64-bit)). Device manager reports everything is fine, but i can't find the adapter anywhere in the Network and Sharing Center on both machines, not even if i run ipconfig it won't show up. As a result of course there is no wireless connection available. Although adapter has worked fine when tested under win7 x32. But win7 x32 is not my case.
View 1 Replies
View Related
Jun 3, 2011
I just upgraded my motherboard and I'm happy that the WUSB 300N is still working. Slightly annoying issue when I wake my computer from sleep. No internet connection and when I go to adapter settings, the WUSB 300n is disabled. If I click enable, nothing happens. The adapter will immediately come back to life and connect to the router and internet if I unplug it and then plug it back in (the usb connector).I also notice that the adapter is still on when my computer is asleep, all of the lights are still on and blinking, this is not the same behavior that it had before, then it would just appear to be completely off. The motherboard is a MSI P67A-GD65 with an intel i5 2500K. There are some different C-State power settings that I'm not familiar with (previously had an AMD based mobo and processor).
View 1 Replies
View Related
Apr 6, 2013
SetupWizard fails for the WRT54GL. I'm using Windows 7. Even though the software failed the router WRT54GL seems to work.Why did the SetupWizard fail?
View 1 Replies
View Related
Jul 28, 2011
I am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all.Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box. When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
View 3 Replies
View Related
Jul 27, 2011
I am having problems with any type of Network Card or Network USB adapter working with my PC running Windows 7. I had a LinkSys WMP54G PCI card working on this computer about a year ago as I was needing to use a wireless connection but then I didn't use it for 6 months. When I went to use it again, it wouldn't pick up connections at all. Thinking it was an issue with the card, I picked up a Edimax 7612UAn USB adapter thinking it should work out of the box. When I plug the USB adapter in, the standard Windows driver installation tries to run but an error message occurs stating "Device driver software was not successfully installed" accompanied by "Realtek RTL8191SU Wireless LAN 802.11n USB Failed". If I try to install the drivers manually, nothing changes and in Device Manager the following error message is displayed under Device Status "This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)".
View 1 Replies
View Related
May 29, 2012
I have a Linksys WPC54GS Wireless adapter with Speedbooster (hardware version 1.1) & I lost my installation CD. I just installed a fresh copy of Windows XP Home Service Pack 1 and I am using a Dell Latitude C810 laptop. The card is the PCMCIA model. I cant get any assistane from Linksys because my warranty expired and I dont have the funds to buy a new card right now, so how I could get this one working again?
View 2 Replies
View Related
Jul 17, 2009
I just installed windows xp pro 64bit and i am not able to use it im guessing because i need the correct driver, ive tried looking around but couldnt find anything. I also try it working with Windows 7 ultimate (64bit) and i could not get it working on that either.
View 4 Replies
View Related
May 24, 2011
I've been using my AE1000 for about a month now with absolutely no problems. Yesterday it just stopped working, I removed it from the USB port and just about burned my fingers on the metal part that plugs into the USB port. BTW I am on Windows 7 64-bit.
Now it won't work. I've tried reinstalling the driver and the device just blinks in the "Devices and Printers" control panel. I removed it again and it was very hot to the touch after only being in the port for about a minute.
View 1 Replies
View Related
Sep 15, 2011
Ive been using my linksys wusb54g network adapter for a while. I have windows vista and until today it has been working fine. I reinstalled my OS because i had been having blue screen of death problems. Now that i've done this, i cant seem to get my adapter to work againIve seen a bunch of sites saying i need to install ralink rt2500usb or something, but the links for it never work as these pages are several years old.I cant figure this out. All i need to do is get my internet working and this adapter just doesnt work. Theres no support for vista i guess.
View 9 Replies
View Related
Jul 2, 2011
When I insert the disc for my new AE1000, the setup opens automatically and begins to run. Before even letting me read the software end user license agreement, I get a screen that says the following: "Our Customer Support team can assist.Your Linksys Adapter was not successfully set up."I can not figure out any way to keep this message from showing up.
View 4 Replies
View Related
Jan 17, 2012
I am trying to connect a linksys adapter AE 1000 in my XP SP3 but during the CD-instalation appears that error:
AppName: setup.exe
AppVer: 1.1.10049.0
ModName: kernel32.dll
ModVer: 5.1.2600.3541
Offset: 00012a6b
And then a microsoft error windows shut down the installation.
View 2 Replies
View Related
Oct 20, 2008
I got the D-Link router setup and with the network key. When i tried to type the network key in my pc(which has the adapter). it gave me an error.Network key password need to be 40 bits or 104 bit depend on network configuration. This can be 5 or 13 ascii characters or 10 or 26 hexadecimal characters". what does it mean? because the network key work with other pc..but not my pc with WMP 54G. reason?
View 3 Replies
View Related
Apr 16, 2013
Just got a new router. All of my devices connect fine to it except for the desktop that is using an external Linksys wireless adapter (WUSB54AG).The desktop is running Windows XP (Home Edition) SP3.The latest driver for the adapter has been installed (3.0.18.0).I am able to connect if security on the router is turned OFF.The router has 3 security options:
1) WPA-PSK (TKIP)
2) WPA2-PSK (AES)
3) WPA-PSk (TKIP) + WPA2-PSK (AES)
My understanding (from Linksys tech support) is that the device SHOULD be able to connect using WPA-PSK (TKIP). My Linksys Monitor indicates that the device is connected to the access point but not the internet (when I used WPA-PSK (TKIP). The IP address that is assigned is 169.254.3.129 and not the expected 192.168.1.x.When I turn security OFF on the router, the device can connect and I am assigned a "good" IP address (192.168.1.x).
View 2 Replies
View Related
Dec 24, 2011
making Windows 7 do what it's supposed to? Seriously, there needs to be a button you can click to roll it completely back to XP.
View 1 Replies
View Related
Jun 15, 2011
My AE1000 has worked for about 2 weeks, but just stopped working. Have tried to reinstall but it won't recognize the adapter. I can't click the "next" button to continue the installation. I have chagned the USB ports and restarted the computer. But it still wont install. I have Windows Vista. I also have Norton, do I need to uninstall this?
View 1 Replies
View Related
Feb 11, 2012
All Installed my AE1000 this evening, after two go`s got it to work BUT the Cisco installer comes up with "Our customer support team can assist Your Linksys Adapter was not successfully setup." but it is working .. I never got the screen with the four "bubbles" (as per the instructions here on the Cisco website)
PS Running Win7 with AVG security
View 1 Replies
View Related
Jul 26, 2012
I have a E2500 router and just got this AE3000 adapter. Thought that would bump up the wireless signal for using my laptop at the other end of the house about 75 feet from the router. The new E2500 Wireless N has been a big improvement. The AE3000 installed perfectly and shows up as working properly. It's just that the signal strength on my laptop shows 2 bars and the signal strength for the adapter shows 2 bars.
View 2 Replies
View Related
Aug 4, 2011
I've had the AE2500 adapter for a few weeks now, and it's worked fine up to this point. When I started up my computer today, however, it wouldn't connect to the network. I've uninstalled the software that came with the adapter and I've tried to reinstall it. However, when I got to the installation step to insert the adapter, the computer would not identify the AE2500. I've tried updating the drivers through the device manager, but I received an error stating that "a device attached to the system is not functioning".
View 6 Replies
View Related
Jan 29, 2011
Trying to install on Wi 7 32 bit. When starting driver installation I receive an ACCESS DENIED error and the driver does not install.
View 1 Replies
View Related
Apr 7, 2013
i cant install it in the windows 8 its tall me 'the data is invold' and i try all put out and bring in all?
View 2 Replies
View Related
Mar 7, 2012
I am having problems installing this with the cd that was given, so I went on the site to DL the drivers, i downloaded the zip file, but when i open it there is no setup.exe. Do i need to exract the contents to a certain file?
View 1 Replies
View Related
Jul 9, 2012
We've been getting broadband through a WRT54G v2.2 router into numerous computers with WUSB54G v4 wireless adapters into winXP PC's for years now, but I've recently got a 64bit Win7 PC which needs internet connection. I spent all day today trying to find drivers, workarounds and god knows what for the WUSB54G v4 which (I'm pretty sure now ) don't exist for a 64bit system.
How do I get internet into this Windows 7 PC? Will I just need to get a new adapter? (and will it be compatible with the current router?) I don't especially want to get a new router and several new adapters just because we have one new Win7 PC... If I do just need to get a new adapter, in terms of performance/compatibility?
Oh, and how ancient is the hardware we actually have, and does/will it effect the internet in any way?
View 2 Replies
View Related
Jul 12, 2010
Here is my answer to the lack of support from Cisco:
[URL] I am presently using this driver to connect.
View 3 Replies
View Related
Jan 20, 2012
Just picked up a WEC600N Wireless N Express Card and installed. It's working, but it's connected at 54mb and I cannot find out how to configure the wireless settings. I think I am using the Intel Proset wireless software.
Also, router is a netgear wndr3700.
View 1 Replies
View Related
Jul 23, 2012
I installed Windows 7 Ultimate on my computer, and I cannot get my Linksys to work on it, the light doesn't light but it shows up in device manager. I've tried using Vista 32-bit drivers but it doesn't work at all, I am thinking it isn't a driver issue at all because it shows that the driver is up to date.
View 1 Replies
View Related
Jun 5, 2011
Is there a driver or will there be a driver to work with WUSB300n adapter running Windows 7 64-bit Home Pro edition ?
View 1 Replies
View Related
Oct 23, 2009
I've noticed that my WUSB54GSC is completely unsupported by Windows 7, nor has Linksys published any new drivers. From browsing these forums and the internet, many other Linksys users are experiencing much trouble with getting their wireless adapters to work with Windows 7.So please, Cisco, publish new Windows 7 drivers... I'm completely taken back that there is nothing to do with Windows 7 anywhere on your site, and disappointed at none of your products being ready for the new Operating System. Im stuck with a useless router. I've tried for hours and hours to try random fixes i found on the internet, force install drivers preloaded on Windows 7, and force install the out of date Linksys drivers....to no avail. I still need to activate my Windows 7 online, and i can't activate it if my wireless adapter doesn't work. I will keep this in mind when i purchase routers/adapters in the future. I've already tried using the ra-link drivers to get my adapter working, but every time i get a "code 10" error stating that "This device cannot start". Any driver that i do install from Windows 7 pre loaded drivers ends up giving me that error. And all the out-of-date linksys drivers don't even successfully install the drivers...
View 9 Replies
View Related
Dec 27, 2012
After update at win 8 I had problems with the functionality of the WUSB300N. I installed manually the old driver and I have now the limited network and I can not use it.
View 2 Replies
View Related
May 2, 2010
Does the AE1000 Adapter support Windows Pro 64 bit? If it doesn't, is there any Linksys adapter that does?
View 9 Replies
View Related
May 4, 2011
I have just bought the aforementioned Wi-Fi adapter. I have installed driver for it, and in Device manager in General tab I can see that "This device is working properly". owever, the corresponding connection in Network Connections is disabled, and I can't enable it. When try to "Set up a new network" - I only see a blank window with no devices listed. Windows network Diagnostics says: There might be a problem with the driver for the Wireless Network Connection adapterDetected
View 1 Replies
View Related
Nov 16, 2009
So I have a (relatively) old WMP54GX PCI adapter that used to work great under XP. However I moved and was able to put my computer right next to my router so I no longer needed to use the adapter. Fast forward about three years later, I now have Windows 7 installed and need to use to adapter again, but unfortunately it doesn't seem to be working. The drivers never seem to finish installing after reboot, and I'm not sure what I should be doing. I noticed the most "recent" driver was released in 2006, so it doesn't look like there's even one available for Vista, let alone Windows 7.
Am I looking in the wrong place for the drivers, or is Linksys really not supporting their slightly older hardware on new operating systems? If there are no drivers available, any ways to get it working in Windows 7?
View 8 Replies
View Related
Mar 11, 2013
Are there any updated drivers for the AE1200 on windows 8? in win 8, I'm no seeing both bands - only 2.4Ghz and I'm only connecting at 54Mhz.
The disc that came with it has V5.100.68.46 which seem to be the lastest on the support site.
View 2 Replies
View Related
