Linksys Wireless Router :: Accessing FTP Using EA4500 Storage?
Jul 3, 2012
I have a 1TB Western Digital drive connected to my home EA4500 router. Connecting to media server using SMB protocol (192.168.1.1) works fine. I am moving abroad for an extended amount of time, though, so I would also like to connect to this USB drive using FTP. Using the new Cisco Connect Cloud interface, I have enabled FTP sharing for the USB storage device with port 21 and using standard UTF-8 encoding. Whenever I try to connect to the FTP server using my router login credentials, I get the following error message:"There was a problem connecting to the server xx.xxx.xxx.xx. This file server will not allow any additional users to log on. Try to connect again later"
View 9 Replies
ADVERTISEMENT
Apr 10, 2013
Just got my Linksys EA4500 router today.The only confusing thing, not not well explained by Linksys . Is the USB storage set up.One thing (very important) Linksys has failed to explain how to gain access to the USB storage once connected to the router. Once the USB storage drive it set up. Or at least I think it's set up. Nothing shows up on my network page. So how am I to get access to the drive? If it don't show up?I need to know how to gain access to the USB storage drive that is connected to the Linksys router.
This is how I think it is to be set up. Again the instructions are not all that clear how to set up. And where is this widget on the homepage to be located?
View 4 Replies
View Related
Mar 6, 2013
There are plenty of instructions to configure USB storage but there are no instructions on how to use it, specifically. Ok, so I have my ftp address, user name and password and tried to connect with Filezilla on my local network. Unable to connect. Also, the USB device does not even show up in Network settings. However, I am able to see the device as a media server from Sony Playstation.
View 3 Replies
View Related
Jan 2, 2013
I recently got a ea4500, wireless working fine, can connect to the usb storage from different devices fine, but when i try and copy a file to the usb storage, it initially looks like its transferring and registers a file in the usb storage folder. but when i access the usb storage from other devices i cannot find or access the files that i transferred?
View 5 Replies
View Related
Sep 7, 2012
I have the EA4500 router with cisco connect cloud, must say this router is great for limiting kids online.1 question I have however is the ability for a blocked user (internet access block) that is redirected to the cisco web site and presented with a log in screen. Is there anyway I can disable this becuase the kids stay up all night trying to figure out the password to log in, I just want it to say internet access blocked with no option for logging in for the blocked user.
View 7 Replies
View Related
Sep 2, 2012
I have mapped the attached hard drive to my EA4500 on my PC and can access folders and files on my LAN PC. However, when I come in through the Internet via an iOS device, I can see folders but when I try to enter the folder, all I get is a message that displays "|Folder|Enter Into Folder|Select|. There is no click-through capability other than "Return to Upper Folder", which takes me back to folders.
View 8 Replies
View Related
Feb 5, 2012
We have a D-Link DIR655 wireless router on our network. I have purchased two Seagate 1TB network storage units and would like to have one for me and one for my wife. It seems that the router will not support two, because they try to access the same port. How can I plug these two storage units to the router and have access for each of us to one device?
View 2 Replies
View Related
Jan 7, 2013
Region : NewZealand
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
I've plugged in a USB flash drive and enabled shared storage on my TL-WR1043ND router. With "Access shared storage with password" unticked, I can access the share using both my Windows 7 Laptop and Motorola Defy+ (with ES File explorer) and successfully play any Music off of the network share using the Android App, ES File explorer.
If I enable "Access shared storage with password" and attempt to log in using any of the user accounts I've set up on the device, I will be able to access the shares using the credentials on my Windows 7 Machine, but not with my Motorola Defy+, instead I will simply receive "Login failure". I'm Picking it has something to do with the network share type?
View 4 Replies
View Related
Mar 9, 2011
I am wondering if all routers that have a USB port to which network storage can be attached, support the functionality to enable that storage to be accessed from outside the network. If this is true how (in a conceptual sense) can the router be configured to do this and what are the security implications?
View 2 Replies
View Related
Jul 1, 2011
Is it possible to have 2 hard drives connected to a WRT610N perhaps connected through a USB hub?
View 1 Replies
View Related
Jul 29, 2012
I updated my E3200 to 1.0.04 to try to resolve a wireless dropping issue. Now the connected USB storage no longer responds correctly (very delayed if connecting at all). When I try to provision new storage via the routers admin page, I do not get the permissions page.
View 9 Replies
View Related
Aug 5, 2011
Now that the firmware update allows us to plug a printer into the E4200, is there anyway to simultaneously enjoy network storage AND a USB printer?
View 1 Replies
View Related
Feb 13, 2013
I have the N900 model and would like to connect a hard drive via usb. The router can see the external hard drive but the problem I run into is the HD uses a password to open it.
View 7 Replies
View Related
Aug 21, 2012
When I connect my WD My Book Essential 3TB (which is listed as officially compatible with the E4200), I get the following screen:
The E4200 does not detect my hard drive, nor is there a bar saying "detecting".
My problem started when I could not create any new folders through finder. I had to store new files in the root folder. Every time I entered the admin password, I got a message saying I did not have sufficient permission to perform such a task. I then went on to create a new user within the admin group and continued getting the same message. Finally, I formatted the drive directly through my computer and reconnected. And now my HDD is not detected at all.
I have an iMac running OS X Lion. The HDD is question has been formatted to Mac OS extended (journaled).
View 2 Replies
View Related
Apr 28, 2013
I have an e4200v2 with latest firmware. I have changed the administrator password from "admin" to a password of my own.I have recently added a USB hard drive to the router, and it says that admin password to access the share drive is the same as the admin password as the router, but it is not. The password to acces the USB drive is "admin" and there is nowhere to change this password to something secure.
View 5 Replies
View Related
Mar 26, 2012
I am using Window 7 and the WRT610N router. I got a bufflao 1 TB USB harddisk connected to the router.My PC can access to the Harddisk. However, but my pc showing the USB harddisk is full. I checked, there are less than 200GB file on the disk. why is that?
View 1 Replies
View Related
Jul 17, 2011
I have my WRT350N setup. all computers within my LAN can access my usb storage device. I can not access my usb storage device using a computer outside my LAN.
if you log on to 99.225.89.229:8080 it will ask you for user id and pass word to log into my router.
if you try to log on to 99.225.89.229:21 it wont even connect asking you for a user id and password.
my guess is the router is not allowing port 21 to be accessed, but I'm not sure.
View 2 Replies
View Related
Mar 26, 2013
I have TV set box connected to modem router supplied by ISP provider. To the same router I connected EA 4500 to which I wired connected Network Hard Disc at which I store music, photos and films, which I can not access via TV set box. If I connect Hard Disc direct to the modem router to which set box is connected, access works fine.
Whar shall I do to establish accesability of Network Hard Disc over all network ?
View 1 Replies
View Related
Mar 13, 2012
My router usb storege was working fine with my old videos and streaming fine too but now im putting some new videos on the usb storage my router its not showing the new videos on the usb storage.
View 2 Replies
View Related
Feb 16, 2012
I have a Maxtor 160Gb external HDD and want to use it as a network drive.So I go to the routers login page and choose for storage to set it up. I did this once and because I wanted to change a few things I deleted the share and changed the users and usergroup that I've made.Now I can't created a share anymore, also tried another disk(flashdrive) nothing seems to work.The only thing I didn't do is reset to factory default, but that's the last thing I want to do.I use the E3000 router with firmware 1.0.04
View 2 Replies
View Related
Jan 11, 2012
I got E4200 with latest firmware (updated two days ago) and WD Studion with 2 Tb drive (it is HFS+ file system)Once I connect this drive to router I am not longer available to access 192.168.1.1.
View 5 Replies
View Related
Mar 4, 2012
I am uable to access my files on the USB Storage Device connected to WRT610. Its configured properly. I can see the drive on my network. When I double click it asks for password which I enter and it takes me to the shared folder. But when I click it it says Not Accessible....You donot have the persmission. FTP works fine.I have noticed that on the disk page in the Shared Folder Area when you click on the Summary, the box with Groups With Access is Empty. Whereas on the FTP area in the same summary it clearly mentions the admin group.I have tried every thing including factory reset, hard reset, using new group, new user name etc..The technician from Linsys even spent an hour on my computer and ultimately he gave up and gave me number to contact technical support.
View 1 Replies
View Related
Dec 27, 2011
Just bought router and installed. I cannot create share in Storage settings in Advanced settings. I hit Create Share and it brings up the dialog box where I enter the display name. Share entire partition is checked already. I save settings and I see the box going to the form where you assign the Group roles, but then the box disappears and closes. All I see is the original Storage setting page with the Create Share button still there.I tried this on Win 7 using both IE8 and Chrome browsers.
View 4 Replies
View Related
May 29, 2012
The USB storage drive is not found when I attempt to map the drive on my Mac Mini Lion OS, it is not found. My question is, does the wrt160nl storage feature work with Mac OS? I have upgraded firmware to 1.0.0.3 and latest version of Lion
View 2 Replies
View Related
May 8, 2011
E3000 can see only 1TB Maximum. I have a 3TB WD storage and E3000. I have upgraded also to latest E3000 firmware version.
View 3 Replies
View Related
Mar 11, 2009
On my network I have a wired PC running Vista Ultimate, a wireless g notebook running XP Pro, a wired PABT box for VOIP, an iPhone, a wireless g Mediagate MG350HD media extender connected to the TV in the lounge (about 10 metres away through 3 wooden walls) and I have a usb hard drive connected to the WRT610N router.I have only switched on the 2.4 band on the router - 5.0 band requires the client to have wireless N anyway, so since I have no wireless N devices it's no use right now?To manage my network I use Network Magic.
Problem #1. My Mediagate MG350HD keeps dropping it's connection to the network. I have tried using DHCP and a static ip for it but it still drops. The only solution I've found is toremove the blanked-out Mediagate from the network map in Network Magic, reboot the router, click 'search for new devices' in Network Magic and MOST times it will redetect and reconnect the Mediagate.
Problem #2. Trying to configure the network storage device (my USB hardrive) is a pain in the arse.In the routers storage tab I cannot make sense of the folder creation. All I want to do is share specific folders and all their contents on the network. Every time I go to assign access rights and click the groups over into the access granted column and hit 'save' it puts them straight back in the access denied column. Does this have something to with permissions on my PC? When I go into Network and Sharing Centre it now displays 'Network Storage', when I click into it 3 networked folders appear, when I try to set permissions on these folders I hit apply and the boxes I've just ticked blank-out again. The folder marked 'Network Hard Drive' (the one I set-up using the storage tab in the router) does not display the subfolders and the actual movies stored on them. When I try to change the persmissions on the using my PC, different folders, eg Movies, TV etc... I get the same blanking out of the tickboxes on 'apply'.Is there a step-by step graphical instruction I can follow other than the PDF that came on the disk with the router.
View 9 Replies
View Related
Dec 6, 2011
I have Linksys e3000 , I used the web interface to set up the storage. I also from the Administration option of the Storage inside Web Interface changed the netbios name or Device name to the one I like. Now the name does not resolve to the ip address. It used to when I had recently unpacked. I can still access my drive by IP address.
View 3 Replies
View Related
Sep 13, 2011
does e4200 have cifs support. I ask because I have a hard drive connected thru the usb and trying to setup nas storage. But for the hp touchpad to mount it it needs cifs I guess.
View 1 Replies
View Related
Jan 9, 2011
I am very pleased with my purchase of the E3000 so far. However, one function seems to allude me. One of the main reasons for purchasing this router was because of its Media Server functionality. I wanted to be able to stream to my UPnP devices (ps3, xbox360, etc) without having to keep my power hog of a PC running. I have set up the HD using the Storage tab of the Advanced Router Settings, and created several Shares on the Media Server tab. The good news is that I am able to access the share on my PS3. The bad news is that I can't on my Xbox360s. As the Xbox360s has built in wireless N, I would really like to be able to stream to that system.
View 8 Replies
View Related
Feb 17, 2012
I updated to Firmware Version: 1.0.04. And now I can't logon to the router when my storage device is turned on. However, I can logon to the router when the device is off. If I turn the power on the storage device and try to navigate the router it says ".....Can't establish a connection to the server at 192.168.1.1." Then I have to reboot the router to be able to log back on.
View 3 Replies
View Related
Mar 13, 2013
It's been a while since I sent into my router and messed with any of the Storage setting. I recently decided to change things around so I recently went in the router and attempted to access the Storage page but all I get is a blank page with this address http://192.168.1.1/storage/Disk_Management.asp.
View 4 Replies
View Related
Oct 18, 2011
if Linksys will be increasing the size limitation of the E4200 USB storage devices? Will the next firmware allow larger drive sizes? I only bought the thing to share via the router my digital content that is stored on an 8TB external device. What is the perpose to the limit in the first place? Is this a hardware or software limitation of the device?
View 2 Replies
View Related
Mar 25, 2012
I have a 1 TB external drive plugged into my WRT610 and want to access the drive from both Mac and PC. I recently upgraded the Mac to Lion and they no longer enable Time Machine to back-up to a network attached drive (Ugh!). I thought a simple work around would be to clone the drive, but the FAT file format does not allow a file size greater than 4 GB. So I seem stuck.Can the router be configured to enable exFat file format for storage? I have the back-up drive in an obsecure location (this is why I want to access the drive over the network) and would hate to relocate the drive to a more visible location.
View 1 Replies
View Related
