Wireless :: Converting EXE File To SIS Format?

Jun 22, 2011

How can I convert exe file to sis format.

View 1 Replies


ADVERTISEMENT

Linksys Wireless Router :: WRt610N Disk Storage File Format?

Mar 25, 2012

I have a 1 TB external drive plugged into my WRT610 and want to access the drive from both Mac and PC. I recently upgraded the Mac to Lion and they no longer enable Time Machine to back-up to a network attached drive (Ugh!). I thought a simple work around would be to clone the drive, but the FAT file format does not allow a file size greater than 4 GB. So I seem stuck.Can the router be configured to enable exFat file format for storage? I have the back-up drive in an obsecure location (this is why I want to access the drive over the network) and would hate to relocate the drive to a more visible location.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 4.2 - Convert Dmp File To Another Format?

Jun 16, 2011

Is there a way where I can just export the clients from one server and restore them onto another?
 
Is tehre maybe a way to convert the dmp file to another format, like csv, then modifying it and converting back to dmp?

View 3 Replies View Related

D-Link DIR-655 :: Router Configuration File Format Difference Between Rev A And Rev B

Mar 31, 2011

I've owned the Rev A DIR-655 for years and have loved it, but recently it started acting up. I have a complicated setup saved as a gateway settings file (.gws).  I decided to purchase a new DIR-655 for the ease of importing my settings without having to manually setup again, however, much to my dismay, the new file format for the configuration settings on the Rev B is not .gws but rather .bin.  The .gws file will not import. I tried changing the file extension to .bin with hopes it might import but no luck. I also found the utility which decrypts the .gws file into .xml and used those values to manually re-enter the settings into the Rev B router, but my port forwarding is not working the same.  I was wondering if there is any utility to convert the .gws file to the .bin file in order to import into the Rev B router, or if not, can I still purchase the Rev A model somewhere. The online shops I've checked do not list the hardware version. 

View 7 Replies View Related

Cisco :: LMS3.2 Software Distribution File Format?

Aug 23, 2011

in RME->Software Management-> Software Distribution -> By Devices [advanced],  what is the file format we should have here, when we try to deploy many IOS images at once?

View 1 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 Import Template Gives File Format Validation Failed

Sep 21, 2011

Network Resources - Network Devices and AAA Clients- File Operations - Add - gives me File Format Validation Faliled. I am carefull to leave the header as it is. The header in the Import Template looks faulty, see attached. When exporting devices I also get the same header as attached. I also tried to change the header so its all in one column, but with same result.

View 1 Replies View Related

Belkin Routers :: N150 Firmware Upgrade Giving File Format Error

Mar 19, 2013

I bought belkin N150 recently. I tried to configure with my ISP. They are surprised how I don't have DHCP option in the wifi configuration and asked me to upgrade my firmware. When I tried to upgrade. I downloaded the firmware from [URL] tried to upgrade. It is showing file format error.

View 2 Replies View Related

Cisco Wireless :: 1240AG Converting From WEP To WPA

Aug 20, 2012

Cisco 1240AG converting to WEP to WPA
Access Point Model: Cisco 1240AG
System Software Filename: c1240-k9w7-tar.123-7.JA5
System Software Version: 12.3(7)JA5
Bootloader Version: 12.3(7)JA1
 Access Point Model: Cisco 1131AG
 Software: Cisco Aironet Desktop Utility 2.1.02
 
After converting encryption from WEP to WPA in a Cisco 1240AG in personal mode with an SSID name of example1 and Cisco 1131AG access point in personal mode with an ssid of example2; both with the same wpa passphrase, I created a new profile on the Cisco Aironet Desktop Utility with a new profile name as well as a WPA passphrase, but the desktop utility will only connect to the access point if one network name, example1 or example2, is entered.

View 18 Replies View Related

Converting Wireless Signal To Wired With Computer?

Jan 18, 2011

My desktop computer doesn't have a wireless card in it. i also have a laptop which does have a wireless card. I was wondering if there is a way i can take the wireless connection and re-transmit it to the desktop through ethernet. I have a 5-port switch. I don't really know much about networking. but i am knowledgeable in computers. laptop has windows 7 on it. i really would prefer to not buy a wireless card for the desktop.

View 2 Replies View Related

Cisco Wireless :: Converting 1242ag To And From LWAPP

Apr 5, 2013

is this possible, i need to convert a 1242AG Autonomous back and forth this weekend to use for a quick project for testing.  i need to do: take the AP into LWAPP mode (i know how to do this with the aironet utility)  take the ap from LWAPP back into a AP mode so i can use it as my access point again. [code]

View 3 Replies View Related

Cisco Wireless :: Converting AIR-AP1131AG-E-K9 Into Standalone AP?

Jul 5, 2011

I have a Brand new AP that was bought for a site which has a controller, however it was never installed. I was wondering can you downgrade this AP to make it work in stand alone mode as a normal AP?

View 1 Replies View Related

Cisco Wireless :: Converting 3600 To Autonomous?

Jan 13, 2013

I am not having much luck getting it converted via normal ways. 
 
It times outs on TFTP server when you hold the mode button (a 3500 is working fine doing the same thing). 
 
I try the old school way of archive download-sw but it isn't fast enough before it re-dhcp's because it can't find a controller. "*Mar  1 01:17:51.123: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP..'  Even if I set a static IP address.
 
Is there way to disable the join process while I upgrade the software?  I guess fire up a controller for it to join.  I hope I don't have to have a controller to convert these. 

View 31 Replies View Related

Cisco Wireless :: Converting AIRLAP1142 To Autonomous

May 17, 2012

I have an AIR-LAP1142 that I'm trying to load the autonomous software onto.  I reset the AP with the mode button held down as per instructions.  When I release, it attempts to download c1140-k9w7-tar.default from my pc running tftpd62.  Several connections are made and then it eventually times out.  I tried another machine (also win7 x64) and it fails there too exactly the same.
 
TFTP logs show:
 
Connection received from 10.0.0.1 on port 1024 [18/05 17:22:04.269]
Read request for file <c1140-k9w7-tar.default>. Mode octet [18/05 17:22:04.270]
Using local port 51686 [18/05 17:22:04.270]

[Code].....

View 3 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8951ND / Converting LAN To WAN Port?

Jan 1, 2013

Region : India
Model : TD-W8951ND
Hardware Version : V1
Firmware Version : 5.0.0
ISP : Beam Telecom

I recently bought this device in hurry . My ISP has directly connected RJ45 cable to my laptop .So i need to use this device for sharing internet to my wireless devices .IS it possible to convert Rj45 to Rj11 if so let me know the process .I have seen interenet about converting lan port to wan for TD-W8960 device . but GUI administration is quite different for my device .

View 1 Replies View Related

Cisco Wireless :: Converting 2602 From Lightweight To Autonomous?

Feb 19, 2013

I have a problem converting 2602 from lightweight to autonomous.  It will not boot to the autonomous IOS.  The procedure below is waht I did.
 
ap: set IP_ADDR 10.0.0.1
ap: set NETMASK 255.255.255.0
ap: tftp_init

[Code].....

View 28 Replies View Related

Cisco Wireless :: Converting 1040N Autonomous AP To LWAPP

Oct 5, 2011

I have a couple of 1040N autonomous APs want to convert to light weight APs.

View 8 Replies View Related

Cisco Wireless :: Converting AIR-SAP2602i-s-k9 From Autonomous To LWAPP

Feb 26, 2013

I need your expertise regarding how to convert from autonomous to LWAPP using AIR-SAP2602i-s-k9 with IOS version of ap3g2-k9w7-xx.152.-2.JA.
 
I'm following these commands but it is not available
 
debug capwap console cli or debug lwapp console cli
   
I cannot proceed to convert it Did I miss something or the 2600 series doesn't support LWAPP convertion ?

View 2 Replies View Related

Cisco Wireless :: Converting 881W From LWAPP To Autonomous Mode

Aug 19, 2010

I was trying to upgrade the IOS image of the AP and I did a wrong manip.
 
I downloaded the IOS image (ap801-rcvk9w8-tar.124-10b.JA3.tar) from my TFTP server to the flash of the AP. Everything went find so far. But than I did an archive archive download-sw /overwrite ap801-rcvk9w8-tar.124-10b.JA3.tar and my AP reboot in LWAPP mode.
 
I should have done: archive download-sw /overwrite tftp://10.0.0.1/ ap801-rcvk9w8-tar.124-10b.JA3.tar instead!
 
Now I don't how to go back to autonomous mode. archive commando is not available anymore in LWAPP mode.

View 4 Replies View Related

Cisco Wireless :: Converting A 1260AP From Autonomous To Light Weight Mode

Jan 17, 2013

Is the process for converting 1260 APs to lightweight mode any different from converting 1140s or 1250s? I've converted several APs to LWAP mode but this is my first 1260.  Four 1260s need to be converted.I have one in a remote location that seems to be comatose. Here are the steps I took to convert the AP.  Did skip/miss a step?
 
1. uploaded code to the AP  ap3g1-rcvk9w8-tar.152-2.JB.tar
2. configured the AP for DHCP. It successfully leased a DHCP address. Controller information is provided via DHCP Option 43.
3. saved the configuration
4. verified the code, successful
5. disabled wireless radios
6. installed the lightweight code using the command archive download-sw /safe flash:/ap3g1-rcvk9w8-tar.152-2.JB.tar.The installation was successful
7. rebooted the AP
 
After that nothing. The AP has not leased another IP address. The switchport is active. The APs MAC address is registering in the switches MAC address table.  The AP is receiveing PoE from the switch. I noticed that this AP is only receiving 6.2W of power where the three are getting anywhere between 8.8W and 9.3W. I am unable to ping the old static IP of the AP too.

View 4 Replies View Related

Wireless :: Format Hard-drive And Reinstall XP Pro / USB Ports Don't Work?

Jan 2, 2012

Purchased desktop from micropro in 2002. We finally upgraded to cable internet in 2011, Wife purchased Think Pad laptop also in 2011 (wireless enabled). Purchased Belkin wireless router and want to network these 2 computers.1. My desktop has been demoted to the garage. I have wiped it clean (i hope) by doing a reinstall of XP Pro. Now some of the USP ports won't work. How do I network these two machines?

View 1 Replies View Related

Linksys Wireless Router :: E4200 How To Format Drive For Web Based Utility

Apr 28, 2011

How do you format the drive for this with the routers web based utility?  Or do you just do this while its plugged into your PC then connect it to the router.   I know how to format the drive with the web based utility using the FAT system but its limited to 4gb files.

View 8 Replies View Related

Linksys Wireless Router :: E4200 USB Port / Recommended Format Of The Attached HD Drive / 512 Or 4K?

Sep 8, 2011

what is the recommended format of the attached HD drive, 512 or 4K ?

View 6 Replies View Related

Linksys Wireless Router :: E4200 - 720p Or 1080p MKV Files / Unrecognized Format

Aug 14, 2011

I just wanted to know if it's possible to playback mkv's either 720p or 1080p using the media server built in to a E4200 and streamed to a ps3? Everything is setup, the ps3 can see twonky, and has access to the external HD connected to the E4200, but upon choosing any type of mkv all i get is unrecognized format.... Avi's and mp3's all seem to be okay, as does iso's. Only I thought I read somewhere that it supports streaming HD material. p.s. the E4200 came with the latest .13 firmware. although I didn't put it on there, as I picked it up cheaply as it was a returned unit to the store.as this is supposed to be an upgrade from a wrt54gr that was used with ps3mediaserver, but struggled with 1080p's.

View 6 Replies View Related

Converting Router To Access Point

Mar 22, 2012

I am having problem converting my router echolife HG532b to work as an access point. I have main router as linksys wag 120 with IP adress 192.168.1.1 and DHCP server enabled and IP range from 192.168.1.2 to 192.168.1.100 . I changed the IP adress of the echolife to IP adress withen the range of DHCP and disabled the DHCP server according to this thread Connecting Additional Routers, I changed the wireless setting to match main router with secondary router and connected Cable from main router to LAN port of echolife. When i tried to connect wireless to the network. It takes 5-15 second obtaining the IP adress then it connects but with limited connection with no internet. I have noticed that when i just plug the cable to echolife it become online in the network map for 10-30 sec then it goes offline. I tried to choose IP adress for echolife outside the range of DHCP. In network map echolife stays online but still same problem limited connecting and no internet

View 6 Replies View Related

Cisco VPN :: 1921 - Converting PAK Into A License

Sep 6, 2011

I have purchased a PAK for my 2 cisco 1921 routers .I would like to to configure IP SEC or SSL for VPN connectivity on the routers. How do i convert the PAK into a license?

View 1 Replies View Related

Cabling / Cards :: Converting RJ45 To USB Port?

Dec 14, 2011

I have an old 2007 model Toshiba HD LCD television. It does not have a USB port, but it does have a connection for RJ45. I want to convert this to a USB port, Is there a converter/connector for this purpose?

View 3 Replies View Related

Converting Netgear Wndr370 To An Access Point?

Apr 18, 2012

I have an AT&T 2Wire Router/Modem and want to convert my Netgear WNDR370 to an Access Point.

View 1 Replies View Related

Cisco WAN :: ASA5505 Converting Private To Public IP For VPN

Aug 18, 2011

We have a VPN router(ASA5505) which connects to the client, B. IP address for one si 195.xx.xx.xx and for B it is 14.xx.xx.xx. Both can extablish a IPSEC VPN nicely.Now, B throws a condition that the IP coming thru the VPN has to be PUblic. They want it as such so that they can be routed across the VPN tunnel.It still can because the firewall does not do NAT.

View 5 Replies View Related

Cisco AAA/Identity/Nac :: Converting 3140 CAM To CAS Server

Feb 7, 2011

How to convert a 3140 CAM to a CAS ? if so what software / licensing would be required and is there a documented process

View 1 Replies View Related

Cisco Infrastructure :: Converting WS-C3560G Switch To DC Power?

Apr 15, 2013

What needs to be done to convert a WS-C3560G-24TS-E to DC power? 

View 2 Replies View Related

Cisco Firewall :: Converting To ASA5520 Rules Base

May 17, 2012

I am just about to start on a project where we are moving from Old Cyberguard firewalls to ASA 5520 firewalls, any rule base converstion tool that would be able to do a lot of the basic work? And so of the NAT conversions?

View 1 Replies View Related

Format 60 Computers Over LAN?

Apr 11, 2013

I need to format about 60 computers and they are all networked. Its tedious to walk around to each of them with removable media devices doing it.

View 1 Replies View Related

Cisco Switching/Routing :: Configuration Differences When Converting From ME3750 To ME3800x

Sep 29, 2011

system mtu routing 1500  Is there a replacement command for this?
 
MLS QOS commands not accepted. Has the ME3800 been designed so these buffers don't need to be adjusted?
 
in the policy map:
class class-default
random-detect dscp-based           not accepted. Is there a work around? 

[Code].....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved