Linksys Wireless Router :: Iomega 1tb Disk Not Detected On E4200?

Oct 19, 2012

Firmware is 1.0.05 (didn't work on 1.0.04 too). It has a single partition formated as ntfs, any hint why it doesn't work or diagnostic I could do?

View 2 Replies


ADVERTISEMENT

Linksys Wireless Router :: E4200 No Longer Sees Iomega 1TB External Hard Drive?

Jan 26, 2012

I had an Iomega 1TB External Hard Drive connected to my E4200 router.  I had shares confgured and they were properly running on the network.
 
As of yesterday, this all stopped working. The router does not see the drive; it is as though it is not plugged in.
 
I rebooted the router and it still does not work.  I've connected the hard drive directly to my PC to verify that it works there, and it does. The router is running Ver.1.0.03 (Build 14) of firmware (the latest).

View 9 Replies View Related

Linksys Wireless Router :: E4200 USB Disk And Access Configuration

Jan 2, 2012

I got my NTFS formatted drive to work with the E4200 router via its USB port.I do not see any 'Access' option to configure different access types based on users.  I do have users configured in the Administration tab; these are what came per-configured on the router.

View 4 Replies View Related

Linksys Wireless Router :: E4200 Disk Is No Longer Accessible

Jul 19, 2011

I have connected a Seagate Free Agent 500GB to the USB port of my E4200 and while it does work fine, When the drive has been idle for a while, it goes into power saving mode, turning the spindle motor off. This means it takes a few seconds to access the disk. Not a problem, but apparently, those few seconds are enough for either Windows or the E4200 to decide that the disk is no longer accessible. The share is still available, but I get missing folders and files, files won't open or are not found, and backups job with Acronis True Image will fail because it thinks the share is unavailable.Sometimes, constantly refreshing the view and opening files at random will revive the share, but often, the only way to get it back is to restart the computer.
 
The problem is definitely related to the power saving. If I leave a video clip playing or similar, so there's always some disk access preventing the drive from entering power save mode, it works fine. But 15-20 minutes of no disk activity immediately causes problems.

View 3 Replies View Related

Linksys Wireless Router :: E4200 Download To Hard Disk Capability?

Feb 8, 2012

I am a avid fan of Linksys routers i blindly go buy it. But one feature which i feel isn't there on linksys is the ability to start downloads on the router and also peer to peer capability such as torrents. Asus routers have this and it works flawlessly love to have this feature on the Linksys routers. This is one and only request i ask for in firmware update?

View 1 Replies View Related

Linksys Wireless Router :: E4200 Scanner Don't Detected?

Dec 7, 2011

I have installed Ver.1.0.03 (Build 14) Firmware on my E4200 I launch cisco and detct the printer fine prints fine but goes to offline and my scaner in that printer not work My printer is cx7400.

View 1 Replies View Related

Linksys Wireless Router :: E4200 - Hard Drive Not Being Detected On USB?

Sep 6, 2011

I just updated to the new firmware 1.0.02 and the USB stop working for my External Hard WD 500GB harddrive. I had to roll back to firmware 1.0.01 for it work

View 2 Replies View Related

Linksys Wireless Router :: E4200 V2 Wi-Fi Network Not Detected By IPod Or IPhone?

Apr 8, 2012

Both the iPod and iPhone were on the network and working and now neither is on and don't detect the network at all.  Have turned off and on both devices as well as the router to no avail.  My mini Mac is up and running and has been all day.  

View 1 Replies View Related

Linksys Wireless Router :: WRT54G2 And Iomega Home Media Network HDD

Sep 28, 2010

So I am on my second HDD with Iomega. I am thinking now that this is a router problem rather than a HDD problem. I have a 1TB Iomega home media network drive, eversince I bought my router and began using it I have been unable to use my HDD. It is hard wired to the router via RJ-45 cable and both units have been reset and powered up in about every order you can imagine. I have reset factory defaults on the router and made security changes to ensure there was nothing blocking that port. I am at wits end. I cannot connect to the HDD and the drive flashes yellow and blue indicating it cannot estabilsh or receive an IP address from the router.

View 6 Replies View Related

Linksys Wireless Router :: E3000 - How To Setup Iomega Home Media Network

Jan 26, 2013

I'm trying to set up an Iomega Home Media Network Cloud NAS and I'm having problems with opening ports 50500-50599.  I have opened port 80 and 443 successfully and included the above port range above as well, but when I check it on www.yougetsignal.com the ports 50500-50599 are still closed.  I even tried to split the range in two parts, and still no success.  I have been in contact with my ISP and confirmed they do not block any ports in the 50500-50599 range and that the cable modem (a Motorola SBV5120) is operating in Bridge Mode.

View 3 Replies View Related

Linksys Wireless Router :: WRT610Nv2 - Disk Management Tab

Sep 23, 2012

I plugged in a 2TB external USB drive and restarted the router.  The Disk Management tab appears blank, doesn't give option to format.

View 4 Replies View Related

Linksys Wireless Router :: WET54G V1.1 / Can't Find The Setup Disk

Jan 5, 2013

I Bought a WET53G Vers. 1.1, Long Ago, Now I can't Find the Setup Disk?

View 4 Replies View Related

Linksys Wireless Router :: Can Use Drobo As External Disk On WRT610N

Aug 7, 2011

I looked around on the forum here for info, but couldn't find anything.  I am attempting to hook up a Drobo to my WRT610N and it doesn't show up under the router setup page.  I have updated to the latest firmware.

View 4 Replies View Related

Linksys Wireless Router :: WRT54GS Followed Instructions From Setup Disk

Feb 10, 2009

I purchased the WRT54GS and I followed the instructions from the setup disk. It got to step 4 and then just sat there for a while and said there was an error newrouter or gateway not detected. I kept trying it but I cant seem to get it to work. What can I do to make it install?

View 9 Replies View Related

Linksys Wireless Router :: WRt610N Disk Storage File Format?

Mar 25, 2012

I have a 1 TB external drive plugged into my WRT610 and want to access the drive from both Mac and PC. I recently upgraded the Mac to Lion and they no longer enable Time Machine to back-up to a network attached drive (Ugh!). I thought a simple work around would be to clone the drive, but the FAT file format does not allow a file size greater than 4 GB. So I seem stuck.Can the router be configured to enable exFat file format for storage? I have the back-up drive in an obsecure location (this is why I want to access the drive over the network) and would hate to relocate the drive to a more visible location.

View 1 Replies View Related

Linksys Wireless Router :: Downloaded Cisco Connect For E1200 V2 Disk Image

Feb 3, 2013

I had originally set up my E1200 Jan 2012 & had Cisco Connect setup. I didn't use it much but back in Oct after being away for 10 days I didn't have internet connection. Had to re-set both cable modem--then I at least had connection via ethernet, but still no wifi connection.  Had to turn off for awhile to get it Router to properly reset & work. & then I think I had to do another reset maybe in Dec, can't remember exactly.
 
As I mention in another post, I have been having frequent intermittent not connected to internet messages for a long time. Usually if I just turn wifi off & then turn it back on it finds my network (although frequently I notice that it was on my guest network rather than main). I still don't know if it is cable modem, router or my ISP, altho they came out & checked & said signals ok, but modem could be going (Its old but about to move so don't want to buy new modem now).
 
I updated to Mountain Lion about 2-3 weeks ago.After a Panic last night I was advised to make sure everything updated including router firmware.When I opened Cisco Connect it said I had an unsupported Operating System. Trying to figure this all out, I finally found links to download Cisco Connect that are supposed to be compatible w Mountain Lion (at least the original link said that, but not where I went w the links so hoping it is right link for that). Anyway I downloaded it & was reading a bit & then clicket on the setup icon.
 
That said it was damaged & to eject it. I downloaded it via wifi just like I download other software. Maybe it is hyper sensitive so I need to take it over to plug directly into my cable modem? But then that will mess up the router, although I guess it will need to be reset any way.So I think i need to get Cisco Connect updated so it works w Mountain Lion. Mountain Lion told me about 1 software that wasn't compatible but didn't pick up on Cisco Connect.So don't know if I need to do a hard wired download, unlike the way I download other things, or what to get an undamaged copy. I then hope that it will see the old version, even though it isn't didn't work & hopefully pick up all my settings & all.
 
& then I guess I still need to check for a firmware update. & I understand that a firmware update should be done w a good connection (although the user manual just says good signal, web says hard wired ethernet. & because of the intermittent issues I plan to to it manually by 1st downloading & then installing from the download so there won't be a risk of interruption during install--if its even needed.

View 6 Replies View Related

Linksys Wireless Router :: Ea6500 (fw 1.1.28.146856) Not Recognizing Maxtor OneTouch4 Disk

Feb 10, 2013

I bought an EA6500 router mid january. Firmware is 1.1.28.146856 from day 1 I used this new router. I attached my 750Gb Maxtor OneTouch 4 USB disk to it to share data over my network. I was able to define shares on it. Perfect. .. until I wanted to copy several GB's to this disk. It indicated it would take more than 1 day to finish this copy. So I removed this disc from the router (after removing it in the USB menu). I copied the data from my pc to the disc and attached it back to the router. From then on, it always indicates that no disc is present. Resetting the router did not work. Attaching a USB stick to the router does not cause a problem. It is visible and I can copy data to it. After attaching my Maxtor again, it shows no stations attached... (sharing a disk via the router was one of the reasons for buying this type)

View 2 Replies View Related

Linksys Wireless Router :: WRT120N Gateway Not Detected

May 6, 2012

I've recently bought a  WRT120N router, when I install the router using the CD an error occured error 322 New router or gateway not detected. I tried to download new version of firmware but it didnt work. 

View 9 Replies View Related

Linksys Wireless Router :: E3200 Cannot Be Detected On MacBook Pro

May 2, 2012

I am using the E3200 in a bridge mode to my uverse wifi router, since the E3200 has 5ghz and my uverse router doesn't.  every week or so, I would not be able to detect the E3200 on my Mac Book Pro (I only enabled 5ghz on the E3200), but I can connect to the 2.4ghz uverse router, then access the admin page of the E3200 w/o.

View 6 Replies View Related

Linksys Wireless Router :: Network Is Not Detected By WUSB54G

Dec 6, 2009

I'm having problems getting the WUSB54G v2 adapter work with the WRT160N router (firmware 2.0.03).  I'm running Vista Home Premium SP1.  My wireless network is not detected by the WUSB54G and is not on the list of wireless networks I can connect to. I'm  also having trouble connecting to WUSB54GP ver 4.  The network is detected, but I can't connect.
 
Change the Beacon Interval to 75
Change the Fragmentation Threshold to 2304
Change the RTS Threshold to 2307
 
Now the WUSB54GP ver 4. is working perfectly, but the WUSB54G v2 still can't detect the network. I'm also running a PS3 and a laptop, which work perfectly with the WRT160N router.Also, the WUSB54G v2 system works just fine with my old router (WRTP54G).

View 9 Replies View Related

Linksys Wireless Router :: Wrt120n - No Wired Network Detected

Jan 20, 2012

just brought this router model #wrt120n and can't get setup disk to install because it says i have no ethernet port

View 1 Replies View Related

Linksys Wireless Router :: WRT150N Successfully Up / Now Stopped Being Detected

Jul 10, 2011

I've been using a WRT150N wireless router successfully up until a couple days ago, when it stopped being detected. I can plug my computer directly to my modem, and it works, so my internet connection is fine. I have an older BEFW11S4 router that I am using currently, but it is very slow compared the the N router. I've tried resetting the 150N router, and also the modem, and combinations of both, but nothing seems to work. I plugged the router into my computer without connecting the modem, but I'm not able to access 192.168.1.1 either. All the lights illuminate when the router is plugged in.

View 9 Replies View Related

Linksys Wireless Router :: E1000 Network Is Detected But Cannot Connect To Internet

May 11, 2012

i have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.

View 2 Replies View Related

Linksys Wired Router :: Lost Set-up Disk For WRT160N V3

Jul 19, 2012

I've lost my set-up disk for my Linksys model WRT160N V3.

View 1 Replies View Related

Linksys Wireless Wmp54gs Pci Card Software Disk Is Lost

May 16, 2011

my linksys wireless wmp54gs pci card software disk is lost how can i download software for computer for device to work

View 3 Replies View Related

Iomega STORCENTER IX2-200 Can't Access Users

Oct 19, 2011

I have a STORCENTER IX2-200 CLOUD EDITION in my office with 3 machines hooked up via the router. I cant seem to access users when I enable the security. If i disable security i can get in. This is happening on Windows XP and 7. I've tried Iomega support and it all has to be done via email which is annoying.If i enable security I get the following windows error: \iomegakate is not accessible. you miht not have permission to use this network resource. access is denied.all the machines are logged on as administrator. I did fix this problem although only for a few hours after speaking to Iomega. They advised to use the Net Use command and delete all connections. Ive forgotten what it was now as they remote accessed in.

View 1 Replies View Related

Linksys Wireless Adapters :: Wusb11 Adapter Not Detected By Windows 7

Mar 13, 2011

I've got a bit of an issue. A friend of mine has recently gotten windows 7 installed into his desktop. When he tried to install the network adapter (wusb11 version 2.8), it installed. However, when we searched for it in the device manager, it did not appear. does Version 2.8 only cover up to Windows XP or is there software to make it work for Windows 7?

View 3 Replies View Related

Linksys Wireless Router :: Can't Log Into E4200

Apr 4, 2012

I have a recurring issue with my e4200v1. My wired and wireless connections work fine, but I can't get to the administration website. I have https only set up, and after I get thru the 'certificate error' screen, I get an error that says web page is unavailable. Firfefox tells me that the connection was lost - error 101.I have tried wired and wireless, multiple computers, multiple browsers.   I even turned the firewall off on one computer (or I think I did anyway).The only way I know how to fix it is by completely resetting then setting up the router all over again.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Wan Not Available

Jul 27, 2011

Upgraded from WRT610N to E4200. Since upgrading to latest firmware the wan just disappears both 5 and 2.5 Ghz bands. Happened with older firmware but not as often. Using it in briged mode. When this happens I can't even get to the management page with a lan connected pc. Have to do a hard reboot to get it to respond again. This is unacceptable for a router at this price point.

View 2 Replies View Related

Linksys Wireless Adapters :: AE1200 Not Detected By Setup Program On Windows 7

Mar 22, 2012

I have an HP G60-530US laptop with Windows 7 Home Premium 64-bit. I bought a Linksys AE1200 USB Wireless Network Adapter because the laptop stopped recognizing the internal wireless adapter. However, when I use the CD that came with the Linksys adapter to install it, the adapter is not detected. I have tried different USB ports and also power-cycling the router & cable modem & rebooting. Nothing seems to work. I also ran the Setup program on my Gateway DX4860 desktop but the Linksys AE1200 is not detected on the desktop, either.

View 2 Replies View Related

Linksys Wireless Adapters :: WUSB600N Won't Detect Adapter But Computer Is Still Detected

Mar 24, 2011

I recently upgraded my computer (not laptop) from Windows XP to Windows 7-32 bit. I redownloaded and installed Network Magic, Linksys Wireless Manager and my WUSB600N adapter properly (I hope). Now everything was working fine, I was able to get onto my network through the adapter but today I noticed that the Linksys Wireless Manager seemed to not connect to my network, instead my computer some how did it without  the wireless manager. Now when I tried to connect to a network through the Wireless Manager it said Error: 211 and said My Adapter may not be installed properly and told me to remove the adapter and attach it back after 20 seconds. I tried that but again my computer connected to the network STILL through the computers own manager not through the Linksys Wireless Manager. That was still saying Error 211. So the problem really is that the Linksys Wireless Manager wont detect my adapter but my computer is still able to detect it and connect to my network.

View 4 Replies View Related

Linksys Wireless Router :: How To Setup E4200 As WAP Only

Jan 5, 2013

I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
 
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
 
I'd still want the E4200 to have a SID key for LAN access security.

View 1 Replies View Related

Linksys Wireless Router :: E4200 Not Getting IP Address?

Dec 21, 2011

I have a 6 month old Cisco e-4200 router that is updated to the latest firmware, connected to a Motorola surfboard modem on Sudden-link in Midland, TX.
 
I previously used this exact same setup on Cox Cable in Wichita, KS with no problems. Upon setting it up down here I cannot get the router to pickup an IP address. I have Power-cycled everything multiple times, did a complete reset and re-installation of the router software and still no luck. The Sudden-link techs have no idea what is wrong. They said that the modems signal is strong and everything should be working.
 
Actually I did get it to work once for a couple of days, however when redoing the surround sound system I had to unhook the cable line and it quit working and I haven't gotten it to work again since. I have tried unhooking everything. Turning it all off. Waiting for 5+minutes, and then reconnecting in order: First the modem, then an ethernet cable to the computer which will usually work. But as soon as I unplug the cable from the computer and plug it into the router it stops working.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved