I have one hardwired desktop to a WRT610Nv2 with 2 wireless desktops on the network. I used to be able to jump on and off with my PDA and Netbook......now I can't. PDA reports a "Ying-Yang" symbol along with the encryption symbol when locating the network....
View 2 RepliesI plugged in a 2TB external USB drive and restarted the router. The Disk Management tab appears blank, doesn't give option to format.
View 4 Replies View RelatedI'm trying to access the web setup page and I'm being asked for the user name and password. I have the password from the initial setup written down but apparently didn't also record the (changed) user name. It's not "admin" (tried that - and just leaving it blank - already).
Is there any way to recover the correct user name short of resetting the router and setting it up again from scratch?
All of a sudden my WRTP54G won't connect. I'll pull the plug for a minute and let it reset, and it will connect for about a minute before it drops again. I checked the Linksys site but it looks like new firmware is not available - only user manuals.
View 2 Replies View RelatedI am getting 404 messages but the browser is connecting to the site's server (you can see the little icon for each site in the tabs). The two sites I have identified that I cannot access are UIowa libraries and Music from Outer Space.
-I have emptied all cache, cookies, etc.
-I have reset the router to factory defaults and updated the firmware
-I can load both sites from other networks, however two different computers using my router fail to load these two sites.Until a couple days ago I was able to access both of these sites regularly, and I haven't installed anything or changed any settings on my computer.The fact that two different computers cannot load these sites seems to indicate that it is a router problem.
I am cascading a wrt160n (R1) and a wrt160nl (R2) which are hooked up LAN port to LAN port (via a DLink power line adapter). R1 is hooked up via dhcp to the internet. The whole system works wonderfully for several hours until all of a sudden wireless access to R2 ceases to work (though I still can access everything wired). [code]
View 4 Replies View RelatedUp until recently (4 months ago) my network was fine. However, all of a sudden the network began to drop randomly. Now, the network drops about every 30 mins. Its quite an inconvenience, especially as there are two laptops, a desktop and 2 games consoles running off of the network (not all at once though). I have a Belkin Wireless G Plus MIMO router.
View 5 Replies View RelatedMy Linksys E3200 has no wireless access to the internet. Wireless devices show they are connecting to the router, but cannot access the internet.
The router had worked fine until suddenly no internet access. Mac network diagnostics show that the connections are correct until the ISP and Internet which show either yellow or red.
The router's homepage shows no changes in configuration. Ethernet connection works fine.
My Belkin "ADSL 2+ Model with Wireless G" router suddenly stopped allowing wireless access this afternoon - right in the middle of use - although the wired connections to that router still work fine. No settings seem to have been changed on the router, and I'm the only one with access. Two phones and a laptop that normally work fine just won't get an connection. The laptop - running windows 7 - says the configuration saved did not match what the router was asking for. I tried another computer that doesn't normally connect by wireless and was prompted for a WEP key - which is odd because the router is configured for WPA/WPA2 AES access with a 9 character pre-shared key. After trying a key unsucessfully I haven't been able to get that prompt up again.Meanwhile I've gone into the router settings and it's definitely set to ask for WPA/WPA2. There are some WEP keys specified if I use the drop-down menu to select WEP, but I can't get any device to prompt me to enter one now.
View 5 Replies View RelatedThree days ago people started complaining that it seemed slow. It's supposed to be 100mbps fully switched, but I'm getting speeds of 2mbps - 12mbps (at most) between two workstations on the same switch (which is just insane). I did happen to notice on a couple of the Mac OS X machines that the send and receive errors are off the charts (50% - 80% error rate)!!! This seems a bit suspicious to me.
View 13 Replies View RelatedI have been using a shared network (5 computers) for 2 years and all of a sudden I cannot access it anymore. It should be connecting to the host computer, CHRIS-PC, but I get an error message that Windows cannot access it. All 4 other computers can access the network fine. I did recently clear some malware off my computer with SpyBot, would that have changed any settings?
Network discovery is on
Netbios is enabled
Windows firewall is disabled
AVG firewall is disabled
[code]....
Have a ZyXEL 600 wireless router - it has worked without issues for years.However yesterday evening my wireless router suddenly stopped broadcasting a signal. 2 different PC's and a wifi dongle attached to our TV were suddenly all unable to find my network.The WLAN light on the router was still lit up. I connected my Acer Aspire 5742Z laptop to the router via an ethernet cable and it worked fine. I connected to the router and it said there were no errors.
View 14 Replies View RelatedI'm using a WAG54GS 1.0 router with up to date firmware, and signal around the house has always been fine, yet today it has suddently dropped to a VERY limited range - I'm sat right next to it now on a laptop and the signal is 2/5 bars - "fair".I've reset factory settings yet to no avail, I can't even get signal in the next room!
View 1 Replies View RelatedI suddenly could not go on my web-site anymore(this situation happend a lot already),I went to the server to see whether Apache was running and serving the web-site,tested it locally and it worked,then i checked if my external IP changed, it remained the same.And I know, if i reboot the router 1 or 2 times it will get back to normal, but probably stop working later again. I enabled inbound logging on my router and all of a sudden it shows me this picture of a blocked connection to port 80(even though the ports are forwarded).
View 7 Replies View RelatedAll of a sudden, I can't access my router. It's a Netgear WNDR3700. It's flawlessly, in fact still works flawlessly except I can't access it via 192.168.0.1. The only thing that has changed perhaps is that AT&T repair a DSL problem a few weeks ago, but they never touched my router.
View 5 Replies View RelatedI built my desktop, installed the ethernet drivers, and a week goes by no problemsAll of a sudden the internet stopped working so i reinstalled my ethernet driver and no internet still. So to make sure it wasn't the ethernet cord i plugged it into my xbox and xbox live came up
View 2 Replies View RelatedI am coming with a new question this time, I have a problem with my windows xp, I have installed the drivers, and everything works just fine, But, I have problems with my internet, It will disconnect SUDDENLY from internet, (whatever I am doing, music,drawing in pc and stuff) In my network list I can still see My modem, But When I will try to connect to it It will say "unable to connect to Pas-Home"
View 1 Replies View RelatedAll of a sudden one laptop can't access internet. I've tried everything I could find on Google. Can't access wirelessly (although computer IS connected to the router, no problem) OR even when I directly connect via ethernet. Other computers in household are having no problems whatsoever. Laptop in question (Dell Inspiron 11z, Windows 7) was working FINE until yesterday morning. Nothing I did (deliberately) to the computer (i.e. no downloads, new programs, etc.). Just stopped working. I'll see if I can list some of the stuff I've tried (in addition to the obvious rebooting, restore points, etc.): DNS flush winsock reset ipv4 reset ipv6 reset release and renew DNS.
View 14 Replies View RelatedI've had my DIR-615 since December 2009, and have never had an issue to date. I've used my XBOX, Nintendo DS, iPod touch, and my laptop with it with no issues. Well, yesterday, my mom decided to switch ISP's from Qwest DSL to Xfinity and I thought that if I plugged it right in, it would work since the setting's hadn't changed. Well, that didn't work. I can access the internet with the modem plugged straight to the computer but I still need to be able to access wireless to keep the home free of war, So thinking that I needed to look at the settings by going to 192.168.1.0, I tried. And tried, and tried again. And it says the same thing every time: that the page is not available. In the past, I've done it to change the settings for my DS but sometimes it took me to the Qwest page for it
View 1 Replies View RelatedWhile playing the online game League of legends i suddenly lost internet connection. when loading pages some will not connect and I'll get a message saying I'm not connected and should try reloading, refreshing the page usually fixes the problem, occasionally multiple refreshes are necessary. I've never had this problem before and it's rather inconvenient for me as I need internet access for university.
View 1 Replies View RelatedAbout a week ago i started experiencing very slow download speeds... things like streaming online videos and having to wait which i have not had to do for the last 4 years. I did a speed test on multiple sites and my download speed comes out at about .2mbps and my upload is still where it should be at .6-.8mbps. I have a 12mbps connection so this does not make sense at all. Originally thinking it was malware, I formatted both my hard drives and did a clean install of windows 7 and it did nothing to resolve the issue. Could it be that my wireless card's radio is failing?
View 8 Replies View Relatedthe internet today became insanely slow (I have wireless fyi) , something like 100 kb/s which used to be 2.0 mb/s. I can't even load a YouTube video at 360p. A few things have happened recently which may be the cause. First, I left my computer on all night, but since it has been off, so I don't think thats it. My mom recently turned off my computer by holding down the power button. I have searched my computer for viruses with 4 different programs and nothing has come up. I have also restarted my router and modem multiple times and nothing has happened. AND, I did a 3 hour long fragmentation of my hard drive/ cleaning of the computer.
View 1 Replies View RelatedIt's a 64 bit machine, with windows 7. He fills out surveys and gets money from them, and I don't like to work on his machine because of this. But... He called, so I came over and Anyhow... I'm worried that the Ethernet has gone bad on the motherboard, but they bought a USB stick for wireless internet, and that didn't work either.I realize I have basically no worth while informationHis router works fine, if you plug in another computer it can connect to the internet, but his computer can't. Something is turned off as far as I can tell. And I can't figure out how to turn it on.
View 5 Replies View RelatedMy PC is connected via Ethernet cable to my Sky Broadband box, which also provides internet access to my laptop. Yesterday, all of a sudden, my PC refused to access the Internet. Whenever I try to go on any website through Mozilla, it says server cannot be found, for any site. My Network Status says it is fine, and my laptop still works perfectly, but my home PC all of a sudden just can't surf the Internet. Weirdly, a couple of my games can still work online, though and chat clients like IceChat are unable to, aswell as VOIP clients such as Raidcall. I have no idea what it is, since my Internet was fine the day before this hapened on my PC. I've been through the usual steps of checking your cable, restarting router, diagnosing connection etc, but it still fails to work.
View 5 Replies View RelatedI have a Gateway Laptop running Vista.I also have a netgear router. All of a sudden one day the internet on my laptop died. The laptop previously worked on my network, nothing changed with the network. All my other computers are running fine just this one laptop decided to quit connecting one night.
View 16 Replies View RelatedMy Download Speed was about 10mbps and i be came around 1-5kbps.Is there any software for internet connections like just choose your download and upload speed then restart your computer and your download and upload will be very fast then anything
View 2 Replies View RelatedWe pay for the 12 Mbps package from Comcast and speedtest.net shows that we get a roughly 18 - 19 Mbps connection. We have 4 computers connected to the network, one hard-lined and three wireless.
Usually it is not a problem for my roommate and I to play online games like TF2, Eve, Minecraft, L4D2 with C3 voice chat on our desktops while I simultaneously stream something from Netflix across my laptop.
Lately though, something has changed.
Now, whenever I am using my desktop and playing a game or downloading something (at roughly 2 Mbps) it seems to hog ALL of the bandwidth from the other computers on the network as Netflix suddenly begins having buffering issues on my laptop (wireless) and on my roommate's dektop.
As an example:
For the past few days my roommate and I have been trying to play Minecraft, we use C3 to voice chat while we play and I ALWAYS stream something across Netflix while we play. So in this instance we have one hard-lined connection and one wireless connection running Minecraft (across the LAN) and C3 (across the web) and one additional wireless connection streaming video from netflix (NOT HD Video).
This is common usage for us and it has NEVER been a problem in the past, but in the past few days this setup causes my desktop to lose bandwidth which forces my friend out of the game and causes latency issues with the voice chat program (sound breaks up and my roommate hears my voice chat nearly a minute after I've spoken).
Also, it seems that when my desktop (wireless) connection is working fine using around 2 Mbps, it seems to kill my laptop's (wireless) bandwidth and on one occasion the other night seemed to also affect my roommate's desktop (hard-lined) bandwidth while he was watching something on Netflix.
I built my desktop, installed the ethernet drivers, and a week goes by no problems. All of a sudden the internet stopped working so i reinstalled my ethernet driver and no internet still. So to make sure it wasn't the ethernet cord i plugged it into my xbox and xbox live came up.
View 1 Replies View RelatedI have CISCO 7206 router with NPE-G2 and 2 gig of memory. There's a vpn and pppoe servers on this unit and it hold maximum of 250-300 simultaneous connections. Periodically (1-5 times/hour) router suddenly reboots with lots of messages in console:
IPFLOW: Warning: V5 overfill -Traceback= 0x14975E4z 0x1A133F4z 0x1A16CC0z 0x1A17754z 0x1A17870z 0x3337874z 0x28F80Cz 0x66A704z
*** System received a Software forced crash ***
[Code].....
I googled about first "V5 overfill" but no luck, i analyzed crashifo's with cisco tool and it said - it is ios problem, but if i change ios - problem lives again, no matter which ios i use.
Router: Netgear WNR2000v2
For a long time now, my router has been running fine with my devices. Now all of the sudden, some devices(my xbox, 3ds, and phone) cannot connect to the internet despite them picking up the signal. The weird thing is, the computers in my house and my PS3 can connect. I also don't think it's my security settings(TKIP and AES hybrid) since they all functioned fine with that before this problem.
I tried unsecuring my network as a test, but it seems that only my phone can connect while my 3ds cannot. I haven't tested this with the 360 however. I also tried resetting my router to factory defaults three times.
Five Cisco 1142 integrated in WDS infrastructure: 4 - AP, 1 - WDS with AP... At once on all access points loading of the processor increased to 100 %. And "show proc cpu" - in total in norm, log on all cisco identical below:
(Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 12.4(25d)JA1, RELEASE SOFTWARE (fc1))
Start problem...
Jun 25 16:11:58: %DOT11-6-ROAMED: Station f0cb.a123.d6f9 Roamed to 0c85.257f.05d0
Jun 25 16:11:58: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station f0cb.a123.d6f9 Reason: Sending station has left the BSS
Jun 25 16:23:36: %LEAPCL-3-TIMEOUT: AP Timed out authenticating to the WDS
Jun 25 16:23:42: %WLCCP_AP-6-INFRA: WLCCP Infrastructure Authenticated
Jun 25 16:23:44: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station a088.b405.7320
Jun 25 16:23:44: %DOT11-6-DISASSOC: Interface Dot11Radio1, Deauthenticating Station 0021.5dbf.a3da
[code].....
The problem suddenly began, proceeded about an hour and also suddenly ended...
a client of mine has a RV042 and uses it to work off site via PPTP server. It all worked fine until Friday, when it all of the sudden started spitting 619 errors saying the port was closed. The client laptop is a Window 7 Pro machine and we use the Windows VPN client to connect. I made no changes to router or client. I disabled the firewall on the client for one connection try, just to make sure and the outcome was the same. The setup of the PPTP server on router and the VPN connection on the client were so simple when I did it initially, that I'm now kinda lost and don't know how to troubleshoot it.We switched from QuickVPN to PPTP because we had a bunch of issues with QuickVPN and Windows 7 client is much faster.
View 2 Replies View RelatedI have a Windows 7 64 bit computer that is connected to the internet through an ethernet cable to a 2-wire modem. Other computers at my home are connected wirelessly but I am not. I do have a NetGear print server and connect wirelessly with it to a printer. I am suddenly getting the notification "Native WiFi Default Profile Connected" even though I have been running the computer for a year without ever seeing this.
Is the wireless USB connection over-riding my ethernet connection? and is it possible to revert to having the ethernet connection be dominant? I prefer the ethernet connection for speed.