I'm trying to access the web setup page and I'm being asked for the user name and password. I have the password from the initial setup written down but apparently didn't also record the (changed) user name. It's not "admin" (tried that - and just leaving it blank - already).
Is there any way to recover the correct user name short of resetting the router and setting it up again from scratch?
My Cisco 2811 router starts to hang & give the following error. "Original nvconfig doesn't have a correct magic number recovering from backup."I need to fix it ASAP.I've already enter common & change confreg to 0x2142 & reset but same problem occur.
View 8 Replies View RelatedI have one hardwired desktop to a WRT610Nv2 with 2 wireless desktops on the network. I used to be able to jump on and off with my PDA and Netbook......now I can't. PDA reports a "Ying-Yang" symbol along with the encryption symbol when locating the network....
View 2 Replies View RelatedI plugged in a 2TB external USB drive and restarted the router. The Disk Management tab appears blank, doesn't give option to format.
View 4 Replies View RelatedI have recorder my Security Key number incorrectly, how can I get the correct key number? This is for a Wireless-G router WRT54G2.
View 2 Replies View RelatedI think I used an incorrect password during setup. When I setup the router, I was asked for a username with instructions to use my login ID (name@ISP) and system password. I entered the password I would use to get to my email, not the system password. How can I get back to that screen to correct the password? Now, I have no internet connection without disconnecting the router.
View 3 Replies View Relatedi have a cisco DPQ3925 , im trying to setup user access for my kids to prevent them from accessing the net , i have set up the time of day and the user setup , but cant get it so u have to logon with the set user names to access the net.
View 3 Replies View RelatedToday the power was fallen out in our area and the rv042g was turned off.After the power was back I was checking the router because some trafic didn't came through.Then I saw that all the services were messed up and also all the firewall rules were wrong.the lines were still there but it all was setup as [all 0-0].
After trying to restore a backup it gave me the same, even after resetting the router with the reset button for 30 seconds and doing a restore it didn't work.So I had to reconfigure the router from scratch.This services thing gives me a real pain in the *** because in a previous topic I also have mentioned that something is wrong with the services.
I am trying to recover a corrupted ios, from rommon after configure all steps of IP_ADDRESS, TFTP_SERVER and so on, copy files correctly, but after it need router 5 minutes to erase flash, or something else....after it i can not boot from ios loaded as i show below:
!!!!!!!!!!!!!!!!!!!!!!
File reception completed.
Copying file /c2600-advsecurityk9-mz.123-11.YZ2.bin to flash.
Erasing flash at 0x61fc0000
program flash location 0x60ea0000
[code].....
Recovering the password for a protected network.It can be difficult sometimes to recover a password for a home wireless network or a small to large business. There are several ways to recover such sensitive data and I would trust you to recover in all honesty for the sake and security of the business you work for or even your home network.So how do I recover the key if I don't know the gateway login to my router? the end user will likely default their router to recover the sensitive data but after defaulting they then realize that the SSID key has now been wiped out. The problem now is that all other trusted devices will be disconnected and the set up for the router; well that's just common sense, you would need to set up your static all over again (if applies) and your security as well. Use other devices in your house, trusted devices that have already been able to connect. Windows 7 is the protagonist in this role. Windows 7 enables the use of wireless profiles to be saved for faster connections to be made within the broadcasted range of the SSID. Btw SSID is the network name you see appear in your Wireless Manager. I.e.Bat_Cave; Starbucks; Barnes & Noble Wifi etc.
TIP #!
SSID - service set identification; two categories apply to SSID
SSID - basic service set identification
This applies to ad hoc wireless networks that do not have access points
SSID - extended service set identification
An infrastructure wireless network that has an access point; however this term can be used either SSID or eSSID. You will see eSSID with Point to Point; backhauls, switches, subscriber modules or comtrols; there are tons others but I won't stress other device types. Rarely will you connect to an AP, likely the type of service you receive depends on what you connect to, radio equipment like Canopy, Ubiquiti and Motorola are technologies you will see that are wireless based. What you are seeing is coming from a smaller device within your home or office network. If you use a Verizon air card, it's likely connecting to a nearby AP or a nearby radio which is pointing to an AP.Back to reality now, in order to locate profiles used in Windows 7 we head to the location by two categories of view in the control panel:
Small Icons Start > Control Panel > Network and Sharing > Manage Wireless Networks (This can be found in the left navigation within the vertical blue strip.)
Category Start > Control Panel > Network and Internet > Network and Sharing > Manage Wireless Networks (This can be found in the left navigation within the vertical blue strip.)
What you will see here may be a small list or a large list of every network you have connected to since you purchased the notebook. Now certificate trusted networks will appear here however they may not contain a key. The company I work for requires certificate of authentication and then the use of password linked to Active Directory as long as my computer is on the domain controller. Each wireless profile you see appear here has its own configuration and each configuration is bound to the SSID or network name. It's like the title of a book with its own story. You can have two (2) books with the same name but a different story. When I say different story, I am referring to a different encryption standard; cipher and wireless password. You can see below I have two (2) wireless networks with the same name but notice the different settings.
Bat_Cave
Standard: WPA2 Personal
Cipher: TKIP
Key: -pass51-
Bat_Cave
Standard: WPA Personal
Cipher: AES
Key: #Off5id35!
The reason I am showing you two (2) configurations is because when you are recovering a key for a network, you want to make sure the configuration is the same or else the door will always be locked until you correct your errors. The network name we have is Bat_Cave and we need to recover the key for the SSID that has a Cipher of TKIP.Right click the profile name and click properties. This will allow you to change SSID configuration on the notebook ONLY; in case changes have been made to the router or a buddy changed his encryption standard on his home network. Yeah it's easy enough just to remove the profile and reconnect; but that would be too easy, you wouldn't learn anything.Once you are in the properties of the wireless profile, click the [Security Tab] up top and you will see: encryption standard, cipher and the key; and as a plus, a check box to show you what the key is. Show the hidden contents and copy or write down the key.By using other trusted device on your network or business, you can utilize the resources that you have, to recover a password on your home or business network so long you have the permission from your superior and a good heart for positive intent.
I have 4 story hotel with 40 rooms, 10 rooms in each floor, i want to setup wifi network to cover all the rooms, what should i do or what instruments to use, is it possible to make user based setup for each room.
View 2 Replies View RelatedI simply need to recover an embeded access point password.
I have the passwords to the 881-w router, but passwords to the embedded access point I don't have.
What is the recovery process for it, or the password reset process for the embedded access point.
I can't see where to set a user name on my E1200. I set a password for the web interface then it boots me out and I am promted for the password and username.I don't want to download and configure my router with some poorly written software for my mac; why can't I just do it all through the good old web interface???? I'm able to set everything else up fine but when i set the password I am basically rendering the web interface usless and have to reset the router!! (running Lion, latest build with 8gigs of ram and N wirless adaptor in lappy)
Ok, so I was given this router for free so I shouldn't complain but I do not see any speed increase over my 6 year old 54G rinning wrt, perhaps I need summin better than this $50 walmart special Getting about 10mps download which is also the theoretical max of G right)
1st time use cisco router.Where to check the list of user connecting to the router?
View 6 Replies View RelatedI have the WRT350N router. to access my usb storage link from within the LAN it asks for user id and password as I want it. but to access it from outside my LAN it just connects without asking for user id and password. My guess is it has something to do with shares and how they are setup. I can't figure out how to set it up so it asks for user id and password when attempting to connect to my storage link from the net?
View 1 Replies View RelatedHaving just upgraded from a WRT54G to a E2500 all I can say is that I'm disappointed with Cisco.Having spent a few hours yesterday trying to resolve issues via Live Chat (ID 130105-001270 & 130105-002081) and spending more time today - I'm truly at wits end. I consider myself pretty knowledgeable with computers and networking.I'm not sure if anyone from Cisco's Tech staff sees these posts but I don't know where else to "complain" in hopes that the next software/firmware update resolves these problem(s).
The first is my router's setup screens are totally open when using my desktop. The desktop is hardwired to the router and has the Cisco Connect software installed. I open the Cisco software and go to advanced settings. There I'm shown what my router's name is and its password. This is really strange - why would you wish to display this information PRIOR to requesting username and password? However, once there you can go right into the setup screens by clicking OK.I have also entered these screens directly without being prompted for username/password by using 192.168.1.1 or my router.local via Internet Explorer 8 or Google Chrome. At other times I am denied access because IE cannot display page.I'm concerned because I can hide the Cisco Connect software however, anyone that uses my desktop has full access to my router via the web or Cisco Connect.
The second issue is that the password to enter the router and allow access to the internet IS THE SAME! When I had my WRT54G running I had one password (8 alpha characters) to enter setup screens. There was a router generated, 16 alpha/numeric character, password to allow outside devices such as laptops, TVs and game consoles access to the internet. When I set this router up I installed the 16 character password originally used so my laptop and Wii could connect without having to fool around with their settings. Everything was fine until I went into administration and changed the password to my old 8 character one. That is when I found out that the router uses this password setting under administration to control access to the internet AND access to the router settings!
I have uninstalled and reinstalled IE 8. I have ensured that my browser's history and caches are clear which they do when I shut IE down. I'm running Windows XP service pack 3 with the "proper" anti-virus and anti-malware software. My system is up-to-date.I have ensured that the router is running the latest firmware 1.0.05 build 2 and software 1.4.11299.0.I have seen other posts suggesting the removal of Cisco Connect however, I feel that this is a bandaid solution.I'm not professing to be a router technician however, I "feel" the problem might be the fact that the password issue is the problem. Since the same one is being used for both accessing the router and having the router grant access to the net, my desktop is allowed to access the setup screens without being prompted for username and password.
I have connected the USB drive. I can copy file to the drive, but I have not figured out how to set users or groups I see the Access part of the screen open then close before I can set permissions. I just started with this today, so I figure I am doing something wrong. Everyone can access the files now, but I want to control who can, how do I do this?
View 2 Replies View RelatedI have a wrt160n v1 that stopped working after a power outage. The power light stays solid and I cannot reset the device with the reset button, power cycle, and I cannot access the user interface at 192.168.1.1. Is it bricked? It doesn't show up on my wireless network and when I try to access it via ethernet cable it shows up as an unidentified network with no network access
View 2 Replies View RelatedE2000 has the guest account feature. Not sure if all guests shares the same login credentials. I would like to have guests account use seperate logins. Is this feature available? Another thing, I read the manual and it is indicated that only up to 10 maximum guest acccounts is allowed. I am looking for more than 10 - kinda like a hotspot software.
I've been looking everywhere. I've seen hotspot system, ddwrt, chillspot, etc. But it's complicated as firmware needed to be flashed.
I haven't used my Linksys WRT54G v5 wireless router for about 1 1/2 years and needed it now at a new place.I set a user name and password I've long forgotten for access to the web based security protocols for the modem and I've lost the disk for the control protocol program.I tried pressing the reset button to clear the modem and it took the WPA protocol off the modem so I can use it without any security but that's not a good thing.How do I get it freed up so I can get to the security protocols and put security back on my modem?
View 9 Replies View RelatedWhen I click on the pdf icons or the "User Guide" link on the E4200 product page, Firefox 5.0.1 pops open a new window, but it's blank. I can't see the pdf file. Usually, when I click on a link to a pdf, FF gives me the option of saving or opening the file.
View 1 Replies View RelatedI have the EA4500 router with cisco connect cloud, must say this router is great for limiting kids online.1 question I have however is the ability for a blocked user (internet access block) that is redirected to the cisco web site and presented with a log in screen. Is there anyway I can disable this becuase the kids stay up all night trying to figure out the password to log in, I just want it to say internet access blocked with no option for logging in for the blocked user.
View 7 Replies View RelatedI have manually configured the E2000 and set the admin password. When I was trying to log back in, I could not. I reset and reconfigured and set the password again. I still could not log in using "admin" and the password I set up. I thought I was losing my mind. Just on a hunch, I used the SSID name instead of "admin", then entered the password that worked. I am able to login, but I need the username to be admin, not the SSID. Has anyine else had this issue? Any way to change the administrator name back to admin??
View 5 Replies View RelatedJust set-up a new X2000, loaded latest firmware 2.0.01, configured it via the web UI ('Browser based utility' as per the manual). Connected OK to my ADSL broadband by O2. Configured wireless, everything OK. Funny it doesn't need a user name, only a password, my prevoius WAG160N could be configured for both.Now I want to configure the Parental Controls, BUT apart from my computer name and an Android phone name, all I see in the Target Device ADD button pop-up are a list of repeated 'Network Device'. There seems no way to be able to distinguish which is which device (mix of XP & Win 7 PC's and HP Printer through a separate switch), as it does not show IP address or MAC.
I thought I may have better luck with the Cisco Connect software (which I didn't use to set-up the router). I downloaded the latest version 1.4.11194.0, and ran this on another computer with wireless. Apart from reconfiguring my static IP address to DHCP, and then connecting through DHCP, the software said it could not configure my router. So it never gets to a point where it installs any program on the computer so that I can configure Parental Controls. How do I get the router to show ALL the computer names in the list rather than 'Network Device' or is there a way to distinguish which 'Network Device' is which computer?
Time Warner used remote access to get into my wrt54g system and create a new user id/password for security. As a result, my hp printer will no longer communicate with my computer. HP says to hook up a usb from router to printer, but there's no usb port on the wrt model I own. I hooked up a usb from computer to printer but it did nada...
View 5 Replies View RelatedI just got the WRT610N and I really like it so far, I'm playing with the NAS option and I can't get it to create any new users or groups. I click on the link, fill out the form and click on 'modify user' (The set-up guide has a button there for 'save settings') and nothing gets created. I tried this several times and there are no new groups or users. I checked the storage.info file and there is no additional users or groups there either. I think I can edit that file but I'm not too sure what these last 2 lines mean
nas_login@admin:admin:admin: off guest:guest:guest: onusers_content@admin:admin:admin:admin: off guest:guest:guest:guest: on
I recently installed an RE1000, which seemed to be working fine. Then, on 3 PC's with no wireless adapter installed we began being prompted for user name and password for the wireless router. Once I unplugged to extender the problem went away. I know what you're thinking: Maybe I just think there's no wireless adapter on these PC's. NO, I looked in device manager and the only network adapter installed is the ethernet adapter. These are all 4+ year old machines with no hardware changes made to them. Wireless adapters are not necessarily standard issue on old towers--even on new towers. The Acer I'm using right now was purchased new in November 2011 and did not come with a wireless adapter installed.
View 3 Replies View RelatedI cleared the flash (disk0) on my ASA and now I'm unable to restore it with an IOS.
When I attempt to load it with an IOS, it appears to load just fine. It even proceeds to restart, but when it boots back up it displays the error "No images in / Error 15: File not found. unable to boot an image" and goes to ROMMON.
My computer's IP is 10.0.0.1. I'm assigning the ASA 10.0.0.254. The image filename is asa724-k8.bin. Here's the output of the environmental variables and the attempted loading of the IOS:
I am trying to develop a firewall from scratch in linux environment using C. Actually its more of a Unified Threat Management sysytem .which features to include like antispam, content filtering, vulnerability analyzing,etc.I have exactly 1 year to complete this project which features can be coded completely in time. Actually I have broken the process of development in 4 stages namely :
1. Capture the packet (using libcap)
2. Break the packet into headers and data (using libpcap)
3. Analyze the headers and data and make a decision
4. ACCEPT or DROP the packet
Its the third step that will depend on the features which are included in the project. I plan to code using the UNIX Socket API.
I had my network running seamlessly for years, I set it up using a guide from a magazine and had both wired and wireless working A1 and originally it was all win xp pro, 2 desktops and a laptop but got a macbook pro and got that using printer, sharing fies etc. All no problem and it was all easy peasy BUT I have mucked up big time and I think it was because I downloaded some system cleaning software, advanced care, toolwiz and pc pitstop but I was not paying attention and I am sure I clicked a few buttons I should not have done. Result disaster, no longer can share files or print etc.ll I want to do is reset everything and start afresh but how do I do that? I use a netgear router with norton security on main desktop. I have a wii, an xbox, apple tv running as well along with 2 desktops, a laptop and a macbook pro. Tried a few things but nothing worked, when I click on network places I get a list of shared folders but end location shows internet! I have to use netgear switch boxes as well but should not have caused the problem.
View 4 Replies View RelatedI'm trying to configure the 1130AG from scratch but I'm not having any luck. I tried using the IPSU utility and entered the MAC address but it errors, "The device does not answer". I have connected it to a network so it can get an IP from DHCP but it doesn't respond. And when it boots up from factory reset there is no SSID broadcast for me to connect to. I have tried connecting through the Ethernet port and the Console port to my computer but no luck.
View 3 Replies View RelatedI have set up a Linksys WAG320N and while my Dell connects wirelessly my wifes Mac and my iPad do not. When we enter the password the response is that it is not correct.
View 1 Replies View Relatedi have a cisco 3640 router that i have deleted the image without saving and the router is in ROMM mode i wish to use tftp to download the image
View 2 Replies View Related