Linksys Wireless Router :: WRT350N User Id And Password
Aug 2, 2011
I have the WRT350N router. to access my usb storage link from within the LAN it asks for user id and password as I want it. but to access it from outside my LAN it just connects without asking for user id and password. My guess is it has something to do with shares and how they are setup. I can't figure out how to set it up so it asks for user id and password when attempting to connect to my storage link from the net?
View 1 Replies
ADVERTISEMENT
Aug 2, 2011
My storage link drive is accessible from my lan requireing a userid and password, but it can be accessed from outside my lan through ftp without userid and password. how do I change it so it requires a password from outside my lan when accessed as an ftp drive? I have the WRT350N
View 1 Replies
View Related
Jan 6, 2013
Having just upgraded from a WRT54G to a E2500 all I can say is that I'm disappointed with Cisco.Having spent a few hours yesterday trying to resolve issues via Live Chat (ID 130105-001270 & 130105-002081) and spending more time today - I'm truly at wits end. I consider myself pretty knowledgeable with computers and networking.I'm not sure if anyone from Cisco's Tech staff sees these posts but I don't know where else to "complain" in hopes that the next software/firmware update resolves these problem(s).
The first is my router's setup screens are totally open when using my desktop. The desktop is hardwired to the router and has the Cisco Connect software installed. I open the Cisco software and go to advanced settings. There I'm shown what my router's name is and its password. This is really strange - why would you wish to display this information PRIOR to requesting username and password? However, once there you can go right into the setup screens by clicking OK.I have also entered these screens directly without being prompted for username/password by using 192.168.1.1 or my router.local via Internet Explorer 8 or Google Chrome. At other times I am denied access because IE cannot display page.I'm concerned because I can hide the Cisco Connect software however, anyone that uses my desktop has full access to my router via the web or Cisco Connect.
The second issue is that the password to enter the router and allow access to the internet IS THE SAME! When I had my WRT54G running I had one password (8 alpha characters) to enter setup screens. There was a router generated, 16 alpha/numeric character, password to allow outside devices such as laptops, TVs and game consoles access to the internet. When I set this router up I installed the 16 character password originally used so my laptop and Wii could connect without having to fool around with their settings. Everything was fine until I went into administration and changed the password to my old 8 character one. That is when I found out that the router uses this password setting under administration to control access to the internet AND access to the router settings!
I have uninstalled and reinstalled IE 8. I have ensured that my browser's history and caches are clear which they do when I shut IE down. I'm running Windows XP service pack 3 with the "proper" anti-virus and anti-malware software. My system is up-to-date.I have ensured that the router is running the latest firmware 1.0.05 build 2 and software 1.4.11299.0.I have seen other posts suggesting the removal of Cisco Connect however, I feel that this is a bandaid solution.I'm not professing to be a router technician however, I "feel" the problem might be the fact that the password issue is the problem. Since the same one is being used for both accessing the router and having the router grant access to the net, my desktop is allowed to access the setup screens without being prompted for username and password.
View 4 Replies
View Related
Jun 19, 2011
I haven't used my Linksys WRT54G v5 wireless router for about 1 1/2 years and needed it now at a new place.I set a user name and password I've long forgotten for access to the web based security protocols for the modem and I've lost the disk for the control protocol program.I tried pressing the reset button to clear the modem and it took the WPA protocol off the modem so I can use it without any security but that's not a good thing.How do I get it freed up so I can get to the security protocols and put security back on my modem?
View 9 Replies
View Related
Nov 27, 2011
Just set-up a new X2000, loaded latest firmware 2.0.01, configured it via the web UI ('Browser based utility' as per the manual). Connected OK to my ADSL broadband by O2. Configured wireless, everything OK. Funny it doesn't need a user name, only a password, my prevoius WAG160N could be configured for both.Now I want to configure the Parental Controls, BUT apart from my computer name and an Android phone name, all I see in the Target Device ADD button pop-up are a list of repeated 'Network Device'. There seems no way to be able to distinguish which is which device (mix of XP & Win 7 PC's and HP Printer through a separate switch), as it does not show IP address or MAC.
I thought I may have better luck with the Cisco Connect software (which I didn't use to set-up the router). I downloaded the latest version 1.4.11194.0, and ran this on another computer with wireless. Apart from reconfiguring my static IP address to DHCP, and then connecting through DHCP, the software said it could not configure my router. So it never gets to a point where it installs any program on the computer so that I can configure Parental Controls. How do I get the router to show ALL the computer names in the list rather than 'Network Device' or is there a way to distinguish which 'Network Device' is which computer?
View 2 Replies
View Related
Jul 15, 2012
Time Warner used remote access to get into my wrt54g system and create a new user id/password for security. As a result, my hp printer will no longer communicate with my computer. HP says to hook up a usb from router to printer, but there's no usb port on the wrt model I own. I hooked up a usb from computer to printer but it did nada...
View 5 Replies
View Related
Jun 10, 2009
I have a wrt350n at home and it works fine but it has only one little issue. When I connect my lap wireless I cant see the other work group pcs but if I wire the laptop there is no problem. I use ip to share files and not net bios but sometimes it would be great to find all the pcs on the work group easily and not memorize all the ips.
Disabled firewalls, updated firmware, tried to change network ip... nothing solved. Have no problems at work with an WRT54G.
View 2 Replies
View Related
Dec 26, 2012
I am having issues with the WRT350n where I am getting an "No internet access" message. When I look at the wireless network connection I can see the wireless router and it says "connected" but when I scroll my mouse over the icon, it reads "No internet access". I try to access a webpage and it will not work. I originally had it connected and working properly in my home. However, I removed it and tried connecting in my office and started experiencing this problem. I did not run the setup using the CD provided. I just unplugged it from my home network and reconnected it to my office network, of course with a few passphrase changes and wireless MAC filters only allowing certain PC's to be able to access the internet. I double checked all MAC addresses of each device that I entered into the table and they are correct. All devices see the wireless network but cannot access the internet. Any suggestions? Should I re-run the installation using the CD?
View 1 Replies
View Related
Jul 17, 2011
I have my WRT350N setup. all computers within my LAN can access my usb storage device. I can not access my usb storage device using a computer outside my LAN.
if you log on to 99.225.89.229:8080 it will ask you for user id and pass word to log into my router.
if you try to log on to 99.225.89.229:21 it wont even connect asking you for a user id and password.
my guess is the router is not allowing port 21 to be accessed, but I'm not sure.
View 2 Replies
View Related
Oct 20, 2007
When upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.
View 4 Replies
View Related
May 23, 2012
I have a Linksys WRT350N which I am trying to use an app on my iPhone to connect to my server using the public/external IP of my cable modem. I have the necessary ports opened and also tried adding the server to the DMZ but no matter what I can not get the app to connect to my server via my external IP when I am on my WiFi. I can connect without any problems if I use the NATed IP on the server when my phone is connected to the WiFi. It also works fine connecting to the external IP if I am on any other WiFi or the cellular network (which shows ports are forwarded correctly). I just can't connect to the server when I use the external IP and I am on my WiFi network. This is annoying as I need to keep changing the app's settings back and forth between the external and internal IP whenever I am home or away. I am left thinking this is some kind of issue with the WRT350N not allowing local internal traffic to reach the external IP. Any way to resolve this, maybe by entering a static route?
View 2 Replies
View Related
Jan 4, 2012
I tried to upgrade the firmware of my WRT350N but while upgrading my wife switched on the oven and.... yes, power down -> the upgrade has been interrupted. Now the router is no longer responding, it shows just the green power light on (not blinking). I tried all the resets I found googling (pressing the reset button for 30 sec, isconnecting power and reconnecting it again) but no way, there's no way to ping the router at its default address 192.168.1.1. All the leds are switched off (internet, usb, wireless, security) except the green power light. Is there another way to have it back or it is definitely lost?
View 6 Replies
View Related
Mar 6, 2007
Has anyone managed to access the Storage Link from the internet on the WRT350N router? I am on my second one and it still doesn't work. Also the configuration restore does not work either.
View 9 Replies
View Related
Sep 15, 2011
I have a Dell Wireless 1500 draft N adapter that only connects at G speeds in mixed mode. I tried N only mode and my adapter will not connect. I have tried N mode Auto and 40hz wide and nogo. I have tried TKIP + AES and AES and nogo.
View 1 Replies
View Related
Apr 7, 2012
I recently upgraded my internet speed service from my ISP (Brighthouse). They installed a gateway to replace their old modem, but I have had it bridged so it should act as a modem. Speedtest.net shows downloads on the order of 40-50 Mbps and uploads around 5 Mbps. If I try doing something interactively that pushes the speed and size of files (like flying over Google earth using my mouse to guide the direction and speed) my connection seems to hang. I have to reset the router (unpower and repower it) to get my internet connection to work. This has also happened when I quickly downloaded a series of large images - I click to get the next page fairly soon after the current page has finished downloaded. My router is a WRT350N.
View 6 Replies
View Related
Aug 21, 2012
how to put password and user name on my router?
View 1 Replies
View Related
Aug 5, 2011
I purchased a used WRT54G router that has DD-WRT firmware installed. I do not have the user name and password for it. How do I get around that issue so I can set the router up on my network. I would like to keep the DD-WRT firmware.
View 2 Replies
View Related
Aug 16, 2012
I have this WRT350N with me for a long time. It always worked well, and for a while I didn't used it (like 1 year). Last morning, I set it up and put it to work again and it worked perfectly, but in the evening the wireless stop working. Through cable, the internet works finely.
The light does not turn on or blink anymore. The router setup says that SSID broadcast is enabled. But I can't find the network, even if I type its name and password (supposing it was in invisible mode or something like that).
So I restored the router to its normal configuration, and once again the wireless does not work. Is there something else I can do to make the wireless work again?
View 5 Replies
View Related
Mar 10, 2012
I've been using a WAG320N for a year or so. I just installed a harddrive to the router and am trying to access the harddrive. One thread I found here has instructions for a Mac. It requires me to login using my browser - 192.168.1.1 - and then logon using my username and password. Huh? What username and password? I have a username and password that I use to go pass the firewall for wireless and wifi connection. Is it the same? I tried it but it didn't work. Is there another username and password for the router? I can't remember what that is, if there was one in the first place. I tried the defaults - linksys and admin - and no joy there either.
View 1 Replies
View Related
Mar 27, 2011
Have been using the Router for four years, recently its started to lose "memory" re. my user name and password. Switching off overnight, I'm not able to connect to the internet until I login and fill in the two boxes for my ID & PW.
View 5 Replies
View Related
Sep 6, 2012
I forgot my user name and password to lock my router. How can I reset it.
View 2 Replies
View Related
Jan 30, 2013
I'm using netgear cg3000d and i want to change my password. But my default gateway IP doesn't prompt a log in, only an error message.
I've tried restoring the browser to presettings, clearing the cache, and using chrome, and firefox.
I think i should be logging into admin gui for the router
View 1 Replies
View Related
Oct 21, 2012
I want to create Password and user name of my wireless. so how can I do it?
View 1 Replies
View Related
Jan 15, 2013
i have a Cisco Router 8803G and i would like following commands to be run by telnet:
1) erase an admin user
2) change the password of an admin user
View 2 Replies
View Related
Feb 15, 2013
Forgot User name and Password for wireless modem.How do I retrieve my user name and password for my wireless modem
View 1 Replies
View Related
Jun 12, 2012
I am looking to add a new wireless network for our customers to use.I would like to cover multiple areas of the site. And if cheap enough the whole site.Ideally I would like a control panel I can use to create new passwords for every customer that wants to connect. I can then set an expiry date on the password after that it deletes the password.An extra would be if the person would have to sign an e-policy before being allowed to browse.
View 9 Replies
View Related
Jul 24, 2012
I just get to hands-on on my new WLC 5508?
1) I'm using a single subnet eg 192.168.1.0/24 for my wireless clients and i'm assigning them via the DHCP server from the WLC. As the clients are however made up of laptops and scanners, i would like to assign a range from 50-150 for the laptops and 151-250 for the scanners for easier identification. But it seems that from the WLC DHCP menu i'm not able to do this unless i segment them into a different network with different gateways.
2) Is there anyway to change the WLC user accounts password too? I dont seems to be able to find the option unless i delete the account and re-create it with the new password.
View 5 Replies
View Related
Dec 29, 2011
I can't see where to set a user name on my E1200. I set a password for the web interface then it boots me out and I am promted for the password and username.I don't want to download and configure my router with some poorly written software for my mac; why can't I just do it all through the good old web interface???? I'm able to set everything else up fine but when i set the password I am basically rendering the web interface usless and have to reset the router!! (running Lion, latest build with 8gigs of ram and N wirless adaptor in lappy)
Ok, so I was given this router for free so I shouldn't complain but I do not see any speed increase over my 6 year old 54G rinning wrt, perhaps I need summin better than this $50 walmart special Getting about 10mps download which is also the theoretical max of G right)
View 6 Replies
View Related
Oct 27, 2011
1st time use cisco router.Where to check the list of user connecting to the router?
View 6 Replies
View Related
Jan 27, 2012
I have connected the USB drive. I can copy file to the drive, but I have not figured out how to set users or groups I see the Access part of the screen open then close before I can set permissions. I just started with this today, so I figure I am doing something wrong. Everyone can access the files now, but I want to control who can, how do I do this?
View 2 Replies
View Related
Mar 21, 2013
I have a wrt160n v1 that stopped working after a power outage. The power light stays solid and I cannot reset the device with the reset button, power cycle, and I cannot access the user interface at 192.168.1.1. Is it bricked? It doesn't show up on my wireless network and when I try to access it via ethernet cable it shows up as an unidentified network with no network access
View 2 Replies
View Related
Jul 7, 2011
E2000 has the guest account feature. Not sure if all guests shares the same login credentials. I would like to have guests account use seperate logins. Is this feature available? Another thing, I read the manual and it is indicated that only up to 10 maximum guest acccounts is allowed. I am looking for more than 10 - kinda like a hotspot software.
I've been looking everywhere. I've seen hotspot system, ddwrt, chillspot, etc. But it's complicated as firmware needed to be flashed.
View 1 Replies
View Related
Aug 19, 2011
When I click on the pdf icons or the "User Guide" link on the E4200 product page, Firefox 5.0.1 pops open a new window, but it's blank. I can't see the pdf file. Usually, when I click on a link to a pdf, FF gives me the option of saving or opening the file.
View 1 Replies
View Related
