Create Password And User Name Of Wireless?
Oct 21, 2012I want to create Password and user name of my wireless. so how can I do it?
View 1 Replies
ADVERTISEMENT
Linksys Wireless Router :: WRT54G - Create New User ID / Password For Security?
Jul 15, 2012Time Warner used remote access to get into my wrt54g system and create a new user id/password for security. As a result, my hp printer will no longer communicate with my computer. HP says to hook up a usb from router to printer, but there's no usb port on the wrt model I own. I hooked up a usb from computer to printer but it did nada...
View 5 Replies View RelatedCisco Firewall :: Create Local User In ASA 5520 To Allow User To Use ASDM In Read-Only Mode?
Oct 10, 2011I want to create a local user in my Cisco ASA 5520 to allow the user to use the ASDM in Read-Only mode. I want the user to view the Dashboard only.
View 1 Replies View RelatedCisco Wireless :: 2504 And 1142N AP To Create Individual User Accounts Who Are Connected
Apr 20, 2011We are planning to setup a new WLAN using Cisco 2504 WLAN Controller and 1142N Access Point.Is it possible to create individual user accounts for the users those who all are connecting to this WLAN Network by using the 2504 WLAN Controller ?
View 11 Replies View RelatedD-Link DAP-1522 Wireless - Create Access Point Password?
Mar 3, 2013i cant create dlink acess point password , if I am going 192.168.0.50 then showing error massages , I am check two three computer , then the same error coming
View 1 Replies View RelatedCreate And Manage 40 User Accounts On A Windows 7 PC?
Mar 7, 2013how do i create and manage 40 user accounts on a windows 7 PC.
View 1 Replies View RelatedAAA/Identity/Nac :: Create More Options In ACS 5.2 User Section?
Nov 16, 2006I Need to create more options on Cisco ACS 5.2 under internal identity store in users. How to do add, default not showing all.
View 6 Replies View RelatedCisco :: 2100 Can Create A Guest User Directly On ISE
Oct 10, 2011I have an instance of ISE and NCS with a WLC 2100 plus a couple of LWAPs. This is an evaluation POC lab to sell ISE and NCS to our management to make our life easier.The problem I have amoungst many is I can create a guest user directly on the ISE and the guest can login, the ISE monitor shows the guest authenticates but the clients webpage passes them back to the login page not onto the original client url. The web auth is pointed at the ISE/guestportal/portal.jsp page.If I point the web auth at the internal WLC page using a WLC local user account it works.If I set the guest access to pass through it works without issues getting dhcp and dns. On the ISE is there a policy needed to say if guests are web authenticated give them access? The need is for AD authenticated users to be able tocreate guest users. The AD authentication works for sponsorship and guest creation its just the guest access redirection I am having issues with.
View 1 Replies View RelatedCisco :: WLC 4400 - Create Guest User Accounts
Jun 13, 2011(WLC 4400) which enables employees to browse to a custom made webpage, where they can create an account for company vistors to access the internet. It's important for the employees not use any login credentials, they arrive on a webpage where they specify the login & password which the vistor will enter to browse the internet. Is there any good link to documention about this topic?
View 3 Replies View RelatedForgot User Name And Password For Wireless Modem
Feb 15, 2013Forgot User name and Password for wireless modem.How do I retrieve my user name and password for my wireless modem
View 1 Replies View RelatedCisco Firewall :: How To Create Customized User In ASA5505 Having Certain Privileges
Feb 10, 2013How can i create customized user in Cisco ASA 5505 having the following Privileges? note i dont have AAA server.User can only perform show running, ping, traceroute, show xlate. I have review one of the firewall configuration and found two type of password defined, what is the difference b/w enable and password?
View 2 Replies View RelatedCisco VPN :: ACS 5.2 Create Static IP Address User For Remote Access
Sep 15, 2011At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I can't find it.I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this: [code] I do this,but it's not work.When I use EasyVPN client to connect ASA 5520,user could through authentication but will not get that static IP address which I configuration on Internal Users.so,what should I do,if anyboby knows how to use ACS 5.2 to create a static ip address user for remote access VPN.
View 2 Replies View RelatedCisco Routers :: Create Another Account With User Privileges In RV042 V3?
Jul 26, 2012I am just wondering if it is possible to have two user accounts in Cisco RV042 V3 (Firmware: v4.1.1.01-sp (Dec 6 2011 20:03:18). User accounts to mean that one user can access the router with an administrative level access can do all the changes and management of the router's configurations and settings while another user can only do viewing of the system summary tab and connect and manage the simple configuration to connection to the ISP in both WANs, like setting up the connection type and release/renew the ip address for dynamic ip assigned by the ISP DHCP server.
View 1 Replies View RelatedCisco AAA/Identity/Nac :: Create A New ACS 5.3 User Via RESTclient (Mozilla Plug-in)
May 14, 2013I'm trying to create a new ACS 5.3 user via RESTclient (Mozilla plug-in). Which are the header and the body content to send invoking https://172.26.0.72/Rest/Identity/User/ with POST method?
View 2 Replies View RelatedLinksys Wireless Router :: WRT350N User Id And Password
Aug 2, 2011I have the WRT350N router. to access my usb storage link from within the LAN it asks for user id and password as I want it. but to access it from outside my LAN it just connects without asking for user id and password. My guess is it has something to do with shares and how they are setup. I can't figure out how to set it up so it asks for user id and password when attempting to connect to my storage link from the net?
View 1 Replies View RelatedLinksys Wireless Router :: E2500 Not Asking For User Name / Password
Jan 6, 2013Having just upgraded from a WRT54G to a E2500 all I can say is that I'm disappointed with Cisco.Having spent a few hours yesterday trying to resolve issues via Live Chat (ID 130105-001270 & 130105-002081) and spending more time today - I'm truly at wits end. I consider myself pretty knowledgeable with computers and networking.I'm not sure if anyone from Cisco's Tech staff sees these posts but I don't know where else to "complain" in hopes that the next software/firmware update resolves these problem(s).
The first is my router's setup screens are totally open when using my desktop. The desktop is hardwired to the router and has the Cisco Connect software installed. I open the Cisco software and go to advanced settings. There I'm shown what my router's name is and its password. This is really strange - why would you wish to display this information PRIOR to requesting username and password? However, once there you can go right into the setup screens by clicking OK.I have also entered these screens directly without being prompted for username/password by using 192.168.1.1 or my router.local via Internet Explorer 8 or Google Chrome. At other times I am denied access because IE cannot display page.I'm concerned because I can hide the Cisco Connect software however, anyone that uses my desktop has full access to my router via the web or Cisco Connect.
The second issue is that the password to enter the router and allow access to the internet IS THE SAME! When I had my WRT54G running I had one password (8 alpha characters) to enter setup screens. There was a router generated, 16 alpha/numeric character, password to allow outside devices such as laptops, TVs and game consoles access to the internet. When I set this router up I installed the 16 character password originally used so my laptop and Wii could connect without having to fool around with their settings. Everything was fine until I went into administration and changed the password to my old 8 character one. That is when I found out that the router uses this password setting under administration to control access to the internet AND access to the router settings!
I have uninstalled and reinstalled IE 8. I have ensured that my browser's history and caches are clear which they do when I shut IE down. I'm running Windows XP service pack 3 with the "proper" anti-virus and anti-malware software. My system is up-to-date.I have ensured that the router is running the latest firmware 1.0.05 build 2 and software 1.4.11299.0.I have seen other posts suggesting the removal of Cisco Connect however, I feel that this is a bandaid solution.I'm not professing to be a router technician however, I "feel" the problem might be the fact that the password issue is the problem. Since the same one is being used for both accessing the router and having the router grant access to the net, my desktop is allowed to access the setup screens without being prompted for username and password.
Cisco AAA/Identity/Nac :: Use ACS 5.2 To Create Static IP Address User For Remote Access VPN
Sep 17, 2011At first I use ACS 4.2 to create static ip address user for remote access VPN,It's easy,just configuration it at user set>Client IP Address Assignment>Assign static IP address,but when I use ACS 5.2 I dont't know how to do it.
I try to add IPv4 address attribute to user by read "ACS 5.2 user guide" ,it says this:
Step 1Add a static IP attribute to internal user attribute dictionary:
Step 2Select System Administration > Configuration > Dictionaries > Identity > Internal Users.
Step 3Click Create.
Step 4Add static IP attribute.
Step 5Select Users and Identity Stores > Internal Identity Stores > Users.
Step 6Click Create.
Step 7Edit the static IP attribute of the user.
I just do it,but it's not work.When I use EasyVPN client to connect ASA 5520,user could success to authentication but will not get the static IP address which I configure on Internal Users,so the tunnel set up failed.I try to Configure a IP pool on ASA for ACS users get IP address,and use EasyVPN client to connect ASA , everything is OK,user authenticate successed.but when I kill IP pool coufigurations and use the "add a static IP address to user "configurations,EzVPN are failed. how to use ACS 5.2 to create a static ip address user for remote access VPN?
Cisco AAA/Identity/Nac :: Create Report In ACS 4.1 As Per User Account Expiry Date?
Jan 1, 2013We have installed ACS 4.1 as authentication server for wireless SSID. Need to create list of ACS user expired on specific date.Is it possible to create report in ACS 4.1 as per user account expiry date?
View 3 Replies View RelatedBusiness Wireless Solution With Expiry Date On User Password?
Jun 12, 2012I am looking to add a new wireless network for our customers to use.I would like to cover multiple areas of the site. And if cheap enough the whole site.Ideally I would like a control panel I can use to create new passwords for every customer that wants to connect. I can then set an expiry date on the password after that it deletes the password.An extra would be if the person would have to sign an e-policy before being allowed to browse.
View 9 Replies View RelatedLinksys Wireless Router :: WRT54G - Lost User Name And Password
Jun 19, 2011I haven't used my Linksys WRT54G v5 wireless router for about 1 1/2 years and needed it now at a new place.I set a user name and password I've long forgotten for access to the web based security protocols for the modem and I've lost the disk for the control protocol program.I tried pressing the reset button to clear the modem and it took the WPA protocol off the modem so I can use it without any security but that's not a good thing.How do I get it freed up so I can get to the security protocols and put security back on my modem?
View 9 Replies View RelatedLinksys Wireless Router :: X2000 Doesn't Need A User Name / Only A Password Required
Nov 27, 2011Just set-up a new X2000, loaded latest firmware 2.0.01, configured it via the web UI ('Browser based utility' as per the manual). Connected OK to my ADSL broadband by O2. Configured wireless, everything OK. Funny it doesn't need a user name, only a password, my prevoius WAG160N could be configured for both.Now I want to configure the Parental Controls, BUT apart from my computer name and an Android phone name, all I see in the Target Device ADD button pop-up are a list of repeated 'Network Device'. There seems no way to be able to distinguish which is which device (mix of XP & Win 7 PC's and HP Printer through a separate switch), as it does not show IP address or MAC.
I thought I may have better luck with the Cisco Connect software (which I didn't use to set-up the router). I downloaded the latest version 1.4.11194.0, and ran this on another computer with wireless. Apart from reconfiguring my static IP address to DHCP, and then connecting through DHCP, the software said it could not configure my router. So it never gets to a point where it installs any program on the computer so that I can configure Parental Controls. How do I get the router to show ALL the computer names in the list rather than 'Network Device' or is there a way to distinguish which 'Network Device' is which computer?
Cisco Wireless :: DHCP In 5508 / Change WLC User Accounts Password Too?
Jul 24, 2012I just get to hands-on on my new WLC 5508?
1) I'm using a single subnet eg 192.168.1.0/24 for my wireless clients and i'm assigning them via the DHCP server from the WLC. As the clients are however made up of laptops and scanners, i would like to assign a range from 50-150 for the laptops and 151-250 for the scanners for easier identification. But it seems that from the WLC DHCP menu i'm not able to do this unless i segment them into a different network with different gateways.
2) Is there anyway to change the WLC user accounts password too? I dont seems to be able to find the option unless i delete the account and re-create it with the new password.
How To Create Own Network Key Password
Sep 7, 2011I would like to know how to create my own network key for my everywhere wireless.
View 1 Replies View RelatedHow To Create Wifi Password
Nov 16, 2012How can i create wifi password?
View 2 Replies View RelatedHow To Create Password To Access One Pc From Another One
Mar 4, 2011How to create a password to access one pc to another pc. Like i have 3 pc it is connecting throw switch. ip addresss is 192.168.1.1 192.168.1.2 192.168.1.3 i want access from 192.168.1.1 to \192.168.1.2 like this here i want to create login password and how to remove password
View 10 Replies View RelatedRouters / Switches :: How To Create Password To Access One Pc To Other
Mar 2, 2011how to create a password to access one pc to another pc .like i have 3 pc it is connecting throw switch .ip addresss is 192.168.1.1,192.168.1.2, 192.168.1.3 i want access from 192.168.1.1 to \192.168.1.2 like this here i want to create login password and how to remove password
View 1 Replies View RelatedCisco VPN :: 851 AWG K9 Router - To Create ID And Password For Every Client
Jan 3, 2012Do I have to create a userid and password for every vpn client user that I have on the Cisco router?,When I use the cisco VPN client it asks me for a userid and password,every windows 2003 ad account that I tried did not work,when I used the id that I use to telnet into my cisco to access the console it worked,Do I have something configed wrong or do I need to create duplicate ids?,I am using ESY VPN server on a cisco 851 awg k9 router.
View 5 Replies View RelatedSharing :: Create Password In A Folder Using Windows 7 Starter?
Oct 1, 2011how will I set a password in a folder in my shared drive? and I want to set a permission to the specific person who can read and write my files. I am using Windows 7 Starter.
View 3 Replies View RelatedHow To Find Wan User Name And Password
May 8, 2012How to find wan user name and password
View 1 Replies View RelatedChange The User Name And Password
Apr 21, 2011i need to change my username and password.
View 5 Replies View RelatedHow To Change User Name And Password
May 26, 2012How to change user name and password?
View 1 Replies View RelatedBroadband :: Reset The User Name And Password?
Aug 21, 2011reset my username and password as my wireless network is not secure at this moment. I'm using the DPC 3925 cable modem which I've just purchased from Starhub.
View 4 Replies View RelatedBroadband :: Reset User Name And Password?
Aug 21, 2011How do I reset my User Name and Password
View 1 Replies View Related