Cisco :: Router 8803G - Erase Admin User / Change Password
Jan 15, 2013i have a Cisco Router 8803G and i would like following commands to be run by telnet:
1) erase an admin user
2) change the password of an admin user
ADVERTISEMENT
Linksys Wireless Router :: Can't Change Admin Password On WRV210
Jul 8, 2011I just got a WRV 210 wireless router (three of them actually, planning to set up a VPN). But I can't set the admin password. I've tried 4 times, and every time, i've got to hold the reset button to reset to factory settings in order to access the management pages! I enter the new password in both fields, and then click to save the settings. It restarts. Then i try to log in - and it doesn't accept the new password. It doesn't accept the default password. I've tried with admin/(new password) and (new password)/(new password), and admin/admin. None of them work, forcing me to reset router to factory settings. I've tried a password composed of 6 letters followed by a . Thinking that maybe the . was throwing it off, I tried 6 letters followed by 3 numbers. That doesn't work either. I've updated to firmware version 2.0.1.5. No luck.
View 1 Replies View RelatedHow To Change Admin Password On Ubee DVW3201B
Mar 11, 2012I recently switched ISPs, and the new one gave us a Ubee DVW3201B as our home gateway. I want to change the Administrator username/password from the defaults, but I've been having some difficulty.
Every time, after I save the new username and password, I'm prompted to re-authenticate to the administration interface. It fails no matter what I try. I've tried using:
New username / New password
Default username / New password
Default username / Default password
None of the above works. This has happened twice now, with my only recourse after failure being to do a reset to factory defaults (press and hold the hard reset button for 10 seconds).Is there something I'm missing?
Linksys Cable / DSL :: WAG160N - Can't Change Admin Password
Jan 8, 2012I just recently bought a WAG160N and I have a big issue with it, I can't change the password for the default admin account. All I get is this error in the browser "Error 324 (net::ERR_EMPTY_RESPONSE)"
Quick reset.Power cable disconnect for 60 sec.Factory reset followed by a reset of the router for 60 sec.Clearing my browsers cookies and internet temporary files.Only things I have changed is the Basic Setup to get connected to my ISP and the Wireless settings.
Details about clients, firmware versions etc.
Windows 7 build 7601 Service Pack 1 Chrome Browser 16.0.912.75 Wireless-N ADSL2+ Modem Router V2 firmware version 2.00.20
Change The User Name And Password
Apr 21, 2011i need to change my username and password.
View 5 Replies View RelatedHow To Change User Name And Password
May 26, 2012How to change user name and password?
View 1 Replies View RelatedConfiguring To Change The User Name And Password
Jul 2, 2012Need To Change The user and pw.I have done it before and it was very simple but we are currently staying at her parents house and I tryed entering the default ip on the bottom on the router into 3 different browsers and the configuration didn't appear so I reset the router and now there is no password on it and I still can not Get into the configuration.
View 6 Replies View RelatedCisco AAA/Identity/Nac :: User Change Password On ACS 5.3
Mar 7, 2012On the ACS ver5, there is a "User Change Password" feature. When i click the UCP WSDL, it gives me a page with WSDL language. how is it supposed to be installed? does it copy or install to any web server
View 1 Replies View RelatedServers :: Change User Name And Password On Sever / PC?
Feb 23, 2012Change user name on server & pc
View 3 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 VM - User Password Change Webpage
Sep 21, 2011Is there a way to configure a webpage where end users would go to change their passwords? I would not like to use the network devices themselves with the "change password at next logon" option.
I believe ACS 4.2 has such solution. Does 5.2 have it too?
Cisco Wireless :: DHCP In 5508 / Change WLC User Accounts Password Too?
Jul 24, 2012I just get to hands-on on my new WLC 5508?
1) I'm using a single subnet eg 192.168.1.0/24 for my wireless clients and i'm assigning them via the DHCP server from the WLC. As the clients are however made up of laptops and scanners, i would like to assign a range from 50-150 for the laptops and 151-250 for the scanners for easier identification. But it seems that from the WLC DHCP menu i'm not able to do this unless i segment them into a different network with different gateways.
2) Is there anyway to change the WLC user accounts password too? I dont seems to be able to find the option unless i delete the account and re-create it with the new password.
Cisco Firewall :: 5570 - How To Change Telnet And Enable VPN User Password
Jun 17, 2011how do i change the telnet and enable and vpn user password on asa 5570.
View 4 Replies View RelatedLinksys Wireless Router :: E2000 -Admin User ID Changed To SSID Name?
Jul 12, 2010I have manually configured the E2000 and set the admin password. When I was trying to log back in, I could not. I reset and reconfigured and set the password again. I still could not log in using "admin" and the password I set up. I thought I was losing my mind. Just on a hunch, I used the SSID name instead of "admin", then entered the password that worked. I am able to login, but I need the username to be admin, not the SSID. Has anyine else had this issue? Any way to change the administrator name back to admin??
View 5 Replies View RelatedLinksys Wireless Router :: EA3500 Change Admin Username?
Apr 17, 2012how to change username admin to something different. I can reset the router password but there's no easily identifiable option for changing the username.
View 5 Replies View RelatedLinksys Wireless Router :: EA3500 - Change SSID In Admin Area?
Jun 9, 2012I have logged into the admin area 192.168.... And I do not see where to change the SSID.
View 2 Replies View RelatedCan't Get Access To Router / Won't Accept Admin Password Or 1234
Apr 8, 2012I can't get access to my router. Won't accept admin password or 1234 .
View 3 Replies View RelatedLinksys Wireless Router :: E1000 Determine Admin Password
Sep 29, 2011I have an E1000 linksys router. I am trying to determine the admin password. I have looked at seeral entries regarding this. I do not have CICSO connect installed. Not sure why. The router works fine. I have the CD that came with the router. I have also downloaded current version of connect software. Both of them want to config the router. The first item asked for is the admin password. I know I press reset button. I am trying to retrieve password without doing that.
View 1 Replies View RelatedLinksys Wireless Router :: WRT54G - Lost Username And Password For Admin Page
Apr 30, 2007I seem to have lost my username and password for the admin page for my WRT54G router.Is there a way to retrieve or reset the login?
View 9 Replies View RelatedLinksys Wireless Router :: EA4500 - Admin Username / Password Versus SSID / WPA
May 18, 2012The EA4500 web-settings application asks for a username and password. The username is "admin" and the password is my long (60 character) wpa key. I see where I can change the password but it says I'll lose all wireless connections. This doesn't make sense to me. I would think the router administration username and password are completely separate from the ssid and wpa key. This was the case with my earlier LinkSys router. I'd like a router administration username to be something other than the generic "admin" and a password that is easier than my long wpa key. I want a separate ssid and wpa key (what I currently have).
View 2 Replies View RelatedLinksys Wireless Router :: WRP160N - Not Accepting Admin Password After Firmware Upgrade
May 9, 2012I just installed the firmware upgrade 3.0.03 for my WRP160N router. It is now not accepting my Admin password. Nothing else has changed expect network name now shows linksys and not my assigend network name (SSID)
View 1 Replies View RelatedAAA/Identity/Nac :: ACS 5.4 And User Admin Roles
May 8, 2012we have created some administration accounts which should only have the possibility to work on the user database. the useradmin role is to limited to create a user and set a fixed password only, but not able to enable the users authentication against a predefined external identity store. Other roles which makes this possible are far to powerful for a second level adminstrator.The adminstrator should have the possibility the create an user and set the password check against an external database. This is not possible with the predefine role "UserAdmin". Other roles do have to many rights for these users.
View 4 Replies View RelatedLinksys Wireless Router :: E2500 - Blank Username And Admin In Password Doesn't Work
Feb 23, 2013Blank user name and admin in password doesn't work. How to reset these ?
View 1 Replies View RelatedBelkin Routers :: Lost Admin Security Password Of N300 Share Modem / Router?
Feb 28, 2013i lost the admin security password of my N300 Share modem-router. How can i return to the factory settings ?
View 1 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 Logged User Cannot Access To Admin Parameters
Sep 9, 2012After upgrade to ACS 5.2 appliance , we are trying to configure AAA between Ciscoworks and ACS. Authentication is working but authorization fails , logged user cannot access to admin parameters. I've configured attributes manually but it doesn't work.Does ACS 5.2 support integration with CiscoWorks?
View 1 Replies View RelatedCisco :: 4400 WLC / WCS - Monitoring Lobby Admin User Activity
Jan 26, 2011We currently have about 8 WLC 4400 series controllers deployed around the company, one of these controllers is acting as an Achor controller for GUEST wifi access for visitors to the company, as a result of this we have many users with "LobbyAdmin" access to setup users.
We have recently introduced a Cisco WCS to manage these devices but its not fully implemented/active to see all WLC's.I need to be able to report on the LobbyAdmin users to see who is setting up accounts and for who etc. Currently access to the WLC/WCS is done via Local admin accounts. All accounts for the LobbyAdmin people are setup on our anchor controller.
I have added the anchor controller for this to the WCS system but when looking in Administration/AAA/Groups the LobbyAdmin groups shows No Members.Is there a way that i can import the Lobby Admin names from the anchor WLC to the WCS so i can do reports/audit checks on these users?
Making A User A Domain Admin In Server 2003
Jul 20, 2011I have a desktop without a wireless card and i want my network to be wireless so i bought a d-link wireless card for the desktop, the system then discover the wireless network but could not connect it kept on trying to authenticate, it did not even ask me for the web security key, what do I do
View 1 Replies View RelatedHow To Reset Password And User Name Of Router
Sep 6, 2012I forgot my user name and password to lock my router. How can I reset it.
View 2 Replies View RelatedCisco Application :: ACE 4710 To Setup User With Admin Context Access Permission
Jan 12, 2011ACE 4710 TACACS issues ,How to setup user with Admin context access permission. I have enable the TACACS and it can directly put me in Context mode not in Admin Context mode .
View 8 Replies View RelatedLinksys Cable / DSL :: Change AG241 But Then Can't Use Web Admin?
Jan 18, 2011This is an interesting and don't know where to begin.From factory reset I connect a latop to 192.168.1.1 and change the IP address to my subnet 192.0.1.5/24. I disable DHCP too.THen i plug it in to my LAN and I can ping 192.0.1.5 but can't http to 192.0.1.5
So I remove from LAN, connect to my laptop, manually change my laptop op to 192.0.1.4/24 and then my laptop can http to the AG241 on Linksys AG241.Is there anything on the AG241 that could be confusing my LAN?
Cg3000d - No User / Password Prompt For Router?
Jan 30, 2013I'm using netgear cg3000d and i want to change my password. But my default gateway IP doesn't prompt a log in, only an error message.
I've tried restoring the browser to presettings, clearing the cache, and using chrome, and firefox.
I think i should be logging into admin gui for the router
Linksys BEFW11S4 / Put Password And User Name On Router?
Aug 21, 2012how to put password and user name on my router?
View 1 Replies View RelatedCisco Switches :: Change Admin Service Ports On SG300-10?
Oct 29, 2011I recently purchased an SG300-10 switch. Is it possible to change the TCP port numbers for the administrative services on this device? For example, if I wanted to change the web admin port from being availble on port 80 to port 8080, or move the SSH port from 22 to 2022, how would I do this?
I've looked over the web admin interface, and the Security > TCP/UDP services option looks like what I want, but I see no way to change a service's listening port. Is this possible?
Lost User Name And Password For Linksys WRT54G Router?
Aug 5, 2011I purchased a used WRT54G router that has DD-WRT firmware installed. I do not have the user name and password for it. How do I get around that issue so I can set the router up on my network. I would like to keep the DD-WRT firmware.
View 2 Replies View Related
