Configuring To Change The User Name And Password
Jul 2, 2012
Need To Change The user and pw.I have done it before and it was very simple but we are currently staying at her parents house and I tryed entering the default ip on the bottom on the router into 3 different browsers and the configuration didn't appear so I reset the router and now there is no password on it and I still can not Get into the configuration.
View 6 Replies
ADVERTISEMENT
Apr 21, 2011
i need to change my username and password.
View 5 Replies
View Related
May 26, 2012
How to change user name and password?
View 1 Replies
View Related
Feb 23, 2012
Change user name on server & pc
View 3 Replies
View Related
Mar 7, 2012
On the ACS ver5, there is a "User Change Password" feature. When i click the UCP WSDL, it gives me a page with WSDL language. how is it supposed to be installed? does it copy or install to any web server
View 1 Replies
View Related
Sep 21, 2011
Is there a way to configure a webpage where end users would go to change their passwords? I would not like to use the network devices themselves with the "change password at next logon" option.
I believe ACS 4.2 has such solution. Does 5.2 have it too?
View 3 Replies
View Related
Jul 24, 2012
I just get to hands-on on my new WLC 5508?
1) I'm using a single subnet eg 192.168.1.0/24 for my wireless clients and i'm assigning them via the DHCP server from the WLC. As the clients are however made up of laptops and scanners, i would like to assign a range from 50-150 for the laptops and 151-250 for the scanners for easier identification. But it seems that from the WLC DHCP menu i'm not able to do this unless i segment them into a different network with different gateways.
2) Is there anyway to change the WLC user accounts password too? I dont seems to be able to find the option unless i delete the account and re-create it with the new password.
View 5 Replies
View Related
Jun 17, 2011
how do i change the telnet and enable and vpn user password on asa 5570.
View 4 Replies
View Related
Jan 15, 2013
i have a Cisco Router 8803G and i would like following commands to be run by telnet:
1) erase an admin user
2) change the password of an admin user
View 2 Replies
View Related
May 8, 2012
How to find wan user name and password
View 1 Replies
View Related
Aug 21, 2011
reset my username and password as my wireless network is not secure at this moment. I'm using the DPC 3925 cable modem which I've just purchased from Starhub.
View 4 Replies
View Related
Aug 21, 2011
How do I reset my User Name and Password
View 1 Replies
View Related
Jan 11, 2012
I have a wired adsl connection in location A. i know the user name and password. I want to connect to internet in location B but location B is very far from the location A.is it possible to use the same user name and password to connect to the internet.
View 2 Replies
View Related
Sep 6, 2012
I forgot my user name and password to lock my router. How can I reset it.
View 2 Replies
View Related
Oct 21, 2012
I want to create Password and user name of my wireless. so how can I do it?
View 1 Replies
View Related
Oct 11, 2011
I use ACS appliance 1120 for cisco devices administration. The identity store is external. I use Active directory. Actually, Authentication, authorization and accounting work well but users can not change theirs Active directory password when they have expired. Do you now how to configure ACS to permit password changing?
View 5 Replies
View Related
Jun 30, 2011
If you have two wireless routers on the same private network. On configuring the second router's password and SSID I know the second wireless routers DHCP must be turned off.Can you explain step by step on configuring the second wireless. Must the second wireless be connected to the internet. If yes, how? Must I take the first wireless router off the modem and connect it to the second wireless router for internet connection. (Problem with that is connection from the ISP)
View 2 Replies
View Related
Jan 12, 2011
How do configure win2008 server to bring up a password prompt box when access via a workgroup pc on lan.
View 1 Replies
View Related
Feb 15, 2013
Forgot User name and Password for wireless modem.How do I retrieve my user name and password for my wireless modem
View 1 Replies
View Related
Jan 30, 2013
I'm using netgear cg3000d and i want to change my password. But my default gateway IP doesn't prompt a log in, only an error message.
I've tried restoring the browser to presettings, clearing the cache, and using chrome, and firefox.
I think i should be logging into admin gui for the router
View 1 Replies
View Related
Jun 22, 2011
I am not able to configure the wifi user and password after configure the ssid & passord it is not working according to my requirement
View 1 Replies
View Related
Oct 1, 2012
I need to setup a new User ID and Password because of this "email outage" I have a ticket number MAEH04QRPZ
View 3 Replies
View Related
Aug 21, 2012
how to put password and user name on my router?
View 1 Replies
View Related
Mar 10, 2012
I've been using a WAG320N for a year or so. I just installed a harddrive to the router and am trying to access the harddrive. One thread I found here has instructions for a Mac. It requires me to login using my browser - 192.168.1.1 - and then logon using my username and password. Huh? What username and password? I have a username and password that I use to go pass the firewall for wireless and wifi connection. Is it the same? I tried it but it didn't work. Is there another username and password for the router? I can't remember what that is, if there was one in the first place. I tried the defaults - linksys and admin - and no joy there either.
View 1 Replies
View Related
Oct 4, 2010
Can any VPN user change their user account password through tunnel which configured on local database of ASA 5510?
View 3 Replies
View Related
Jul 21, 2011
I want to change my network password (wpa-psk 802.11g SSID) for security reasons.. I do know the password that's used now.
View 4 Replies
View Related
Jan 2, 2013
I want to change my password because I can't remember it
View 3 Replies
View Related
May 25, 2012
How to change password
View 1 Replies
View Related
Aug 5, 2011
I purchased a used WRT54G router that has DD-WRT firmware installed. I do not have the user name and password for it. How do I get around that issue so I can set the router up on my network. I would like to keep the DD-WRT firmware.
View 2 Replies
View Related
Aug 2, 2011
I have the WRT350N router. to access my usb storage link from within the LAN it asks for user id and password as I want it. but to access it from outside my LAN it just connects without asking for user id and password. My guess is it has something to do with shares and how they are setup. I can't figure out how to set it up so it asks for user id and password when attempting to connect to my storage link from the net?
View 1 Replies
View Related
Jan 6, 2013
Having just upgraded from a WRT54G to a E2500 all I can say is that I'm disappointed with Cisco.Having spent a few hours yesterday trying to resolve issues via Live Chat (ID 130105-001270 & 130105-002081) and spending more time today - I'm truly at wits end. I consider myself pretty knowledgeable with computers and networking.I'm not sure if anyone from Cisco's Tech staff sees these posts but I don't know where else to "complain" in hopes that the next software/firmware update resolves these problem(s).
The first is my router's setup screens are totally open when using my desktop. The desktop is hardwired to the router and has the Cisco Connect software installed. I open the Cisco software and go to advanced settings. There I'm shown what my router's name is and its password. This is really strange - why would you wish to display this information PRIOR to requesting username and password? However, once there you can go right into the setup screens by clicking OK.I have also entered these screens directly without being prompted for username/password by using 192.168.1.1 or my router.local via Internet Explorer 8 or Google Chrome. At other times I am denied access because IE cannot display page.I'm concerned because I can hide the Cisco Connect software however, anyone that uses my desktop has full access to my router via the web or Cisco Connect.
The second issue is that the password to enter the router and allow access to the internet IS THE SAME! When I had my WRT54G running I had one password (8 alpha characters) to enter setup screens. There was a router generated, 16 alpha/numeric character, password to allow outside devices such as laptops, TVs and game consoles access to the internet. When I set this router up I installed the 16 character password originally used so my laptop and Wii could connect without having to fool around with their settings. Everything was fine until I went into administration and changed the password to my old 8 character one. That is when I found out that the router uses this password setting under administration to control access to the internet AND access to the router settings!
I have uninstalled and reinstalled IE 8. I have ensured that my browser's history and caches are clear which they do when I shut IE down. I'm running Windows XP service pack 3 with the "proper" anti-virus and anti-malware software. My system is up-to-date.I have ensured that the router is running the latest firmware 1.0.05 build 2 and software 1.4.11299.0.I have seen other posts suggesting the removal of Cisco Connect however, I feel that this is a bandaid solution.I'm not professing to be a router technician however, I "feel" the problem might be the fact that the password issue is the problem. Since the same one is being used for both accessing the router and having the router grant access to the net, my desktop is allowed to access the setup screens without being prompted for username and password.
View 4 Replies
View Related
Aug 25, 2011
I have configured under Administration password policies about password lenght, items to be putted as number, letters and so on.on the second tab is the password expire for users and I configured to expire after 90 days.
I even tried creating a new user and changing a password from an existing user using Apache TOMCAT WAR,I have checked CLOCK of ACS appliance and setted up NTP on our internal NTP servers
even I create a new user or I change the password via Admin GUI or I change the user password via Apache TOMCAT WAR, I have the user being disabled in a few of minutes, half an hour.,As last, with CISCO AnyConnect is possible to warn the user about the password being expireing and if so, the change could be driven via AnyConnect or is absolutely needed a User Hand Task on the Apache TOMCAT portal I setted up with the ACS WAR application?
View 6 Replies
View Related
Jul 19, 2011
I am migrating from ACS 4.2 to 5.2. In 4.2 you could assign one user to auth via Internal Database and another user to auth via Radius Token Server. I cannot find how to do this with 5.2. There is a note in the doc that states 'Identity-related attributes are not available as conditions in a service selection policy'. Does this mean that you can only choose one auth method for all users? If it is possible to have multiple methods, how am I able to accomplish this?
View 1 Replies
View Related