I have a wired adsl connection in location A. i know the user name and password. I want to connect to internet in location B but location B is very far from the location A.is it possible to use the same user name and password to connect to the internet.
View 2 RepliesAfter pulling a brand new ASA5515 out of the box this morning, I spent countless hours scratching my head wondering why:
1. I cannot establish an HTTPS connection to the Management port - https://192.168.1.1/admin
2. When connecting via the console port I get prompted with a username and password sequence that I don't know
I get an SSL Version Error message when I try to connect with any browser. although I did find a way to resolve it, it requires a console port connection which is not working either.This is not my typical experience with the console or ASDM port setup.
On one of my computers one user cannot connect to Internet. The following message appears: �The Proxy Server is refusing connections. Firefox is configured to use a proxy server that is refusing connections. Check your proxy settings to make sure that they are correct.Changing users to another account and there is no problem connecting.This computer currently has an unresponsive keboard. The above changes and connections are accomplished using only the mouse.Runs on Windows XPHave posted the following thread in hardware:The keyboard on one of my computers is totally non responsive. The following message appears: �Windows cannot start this hardware device because its configuration information (in the registry)
View 3 Replies View RelatedI cant connect to internet but other user can. We use the same laptop but my internet connection was cut off whereas my son's internet connection on the same computer is working fine. I have used cable as well with no success. Obviously there is nothing wrong with the router or cable or wireless but there must be something wrong with my user settings. My son is using the same computer and can connect fine to internet as another user.
View 2 Replies View RelatedI am unable to connect to the internet using my user ID,but when I login to the guest account I can successfully connect.I am using windows vista and Mozilla Firefox as my browser.
View 2 Replies View RelatedI have a laptop with 2 user account (one for me - administrator and the other for my eleven year old son). Connection is wireless. Until a few months ago everything was working fine and then the problems started: my son could no longer connect on the internet with Explorer and Google Chrome but I managed to connect it via Firefox. And it worked until yesterday. As of yesterday he can no longer connect to the internet even with Firefox. I tried again as an administrator to reinstall Google Chrome, but the icon is shown only on my user account. I took a completely new browser - Opera, but fails to connect. When I go to Diagnose & Repair connection problems - shows no problems. On my account everything is working properly. OS is Windows Vista Home Premium
View 2 Replies View RelatedHow to find wan user name and password
View 1 Replies View Relatedi need to change my username and password.
View 5 Replies View RelatedHow to change user name and password?
View 1 Replies View Relatedreset my username and password as my wireless network is not secure at this moment. I'm using the DPC 3925 cable modem which I've just purchased from Starhub.
View 4 Replies View RelatedHow do I reset my User Name and Password
View 1 Replies View RelatedNeed To Change The user and pw.I have done it before and it was very simple but we are currently staying at her parents house and I tryed entering the default ip on the bottom on the router into 3 different browsers and the configuration didn't appear so I reset the router and now there is no password on it and I still can not Get into the configuration.
View 6 Replies View RelatedI forgot my user name and password to lock my router. How can I reset it.
View 2 Replies View RelatedI want to create Password and user name of my wireless. so how can I do it?
View 1 Replies View RelatedI use ACS appliance 1120 for cisco devices administration. The identity store is external. I use Active directory. Actually, Authentication, authorization and accounting work well but users can not change theirs Active directory password when they have expired. Do you now how to configure ACS to permit password changing?
View 5 Replies View RelatedChange user name on server & pc
View 3 Replies View RelatedForgot User name and Password for wireless modem.How do I retrieve my user name and password for my wireless modem
View 1 Replies View RelatedI'm using netgear cg3000d and i want to change my password. But my default gateway IP doesn't prompt a log in, only an error message.
I've tried restoring the browser to presettings, clearing the cache, and using chrome, and firefox.
I think i should be logging into admin gui for the router
I am not able to configure the wifi user and password after configure the ssid & passord it is not working according to my requirement
View 1 Replies View RelatedI need to setup a new User ID and Password because of this "email outage" I have a ticket number MAEH04QRPZ
View 3 Replies View Relatedhow to put password and user name on my router?
View 1 Replies View RelatedI've been using a WAG320N for a year or so. I just installed a harddrive to the router and am trying to access the harddrive. One thread I found here has instructions for a Mac. It requires me to login using my browser - 192.168.1.1 - and then logon using my username and password. Huh? What username and password? I have a username and password that I use to go pass the firewall for wireless and wifi connection. Is it the same? I tried it but it didn't work. Is there another username and password for the router? I can't remember what that is, if there was one in the first place. I tried the defaults - linksys and admin - and no joy there either.
View 1 Replies View RelatedOn the ACS ver5, there is a "User Change Password" feature. When i click the UCP WSDL, it gives me a page with WSDL language. how is it supposed to be installed? does it copy or install to any web server
View 1 Replies View RelatedCan any VPN user change their user account password through tunnel which configured on local database of ASA 5510?
View 3 Replies View RelatedI purchased a used WRT54G router that has DD-WRT firmware installed. I do not have the user name and password for it. How do I get around that issue so I can set the router up on my network. I would like to keep the DD-WRT firmware.
View 2 Replies View RelatedI have the WRT350N router. to access my usb storage link from within the LAN it asks for user id and password as I want it. but to access it from outside my LAN it just connects without asking for user id and password. My guess is it has something to do with shares and how they are setup. I can't figure out how to set it up so it asks for user id and password when attempting to connect to my storage link from the net?
View 1 Replies View RelatedHaving just upgraded from a WRT54G to a E2500 all I can say is that I'm disappointed with Cisco.Having spent a few hours yesterday trying to resolve issues via Live Chat (ID 130105-001270 & 130105-002081) and spending more time today - I'm truly at wits end. I consider myself pretty knowledgeable with computers and networking.I'm not sure if anyone from Cisco's Tech staff sees these posts but I don't know where else to "complain" in hopes that the next software/firmware update resolves these problem(s).
The first is my router's setup screens are totally open when using my desktop. The desktop is hardwired to the router and has the Cisco Connect software installed. I open the Cisco software and go to advanced settings. There I'm shown what my router's name is and its password. This is really strange - why would you wish to display this information PRIOR to requesting username and password? However, once there you can go right into the setup screens by clicking OK.I have also entered these screens directly without being prompted for username/password by using 192.168.1.1 or my router.local via Internet Explorer 8 or Google Chrome. At other times I am denied access because IE cannot display page.I'm concerned because I can hide the Cisco Connect software however, anyone that uses my desktop has full access to my router via the web or Cisco Connect.
The second issue is that the password to enter the router and allow access to the internet IS THE SAME! When I had my WRT54G running I had one password (8 alpha characters) to enter setup screens. There was a router generated, 16 alpha/numeric character, password to allow outside devices such as laptops, TVs and game consoles access to the internet. When I set this router up I installed the 16 character password originally used so my laptop and Wii could connect without having to fool around with their settings. Everything was fine until I went into administration and changed the password to my old 8 character one. That is when I found out that the router uses this password setting under administration to control access to the internet AND access to the router settings!
I have uninstalled and reinstalled IE 8. I have ensured that my browser's history and caches are clear which they do when I shut IE down. I'm running Windows XP service pack 3 with the "proper" anti-virus and anti-malware software. My system is up-to-date.I have ensured that the router is running the latest firmware 1.0.05 build 2 and software 1.4.11299.0.I have seen other posts suggesting the removal of Cisco Connect however, I feel that this is a bandaid solution.I'm not professing to be a router technician however, I "feel" the problem might be the fact that the password issue is the problem. Since the same one is being used for both accessing the router and having the router grant access to the net, my desktop is allowed to access the setup screens without being prompted for username and password.
I have configured under Administration password policies about password lenght, items to be putted as number, letters and so on.on the second tab is the password expire for users and I configured to expire after 90 days.
I even tried creating a new user and changing a password from an existing user using Apache TOMCAT WAR,I have checked CLOCK of ACS appliance and setted up NTP on our internal NTP servers
even I create a new user or I change the password via Admin GUI or I change the user password via Apache TOMCAT WAR, I have the user being disabled in a few of minutes, half an hour.,As last, with CISCO AnyConnect is possible to warn the user about the password being expireing and if so, the change could be driven via AnyConnect or is absolutely needed a User Hand Task on the Apache TOMCAT portal I setted up with the ACS WAR application?
Is there a way to configure a webpage where end users would go to change their passwords? I would not like to use the network devices themselves with the "change password at next logon" option.
I believe ACS 4.2 has such solution. Does 5.2 have it too?
I am migrating from ACS 4.2 to 5.2. In 4.2 you could assign one user to auth via Internal Database and another user to auth via Radius Token Server. I cannot find how to do this with 5.2. There is a note in the doc that states 'Identity-related attributes are not available as conditions in a service selection policy'. Does this mean that you can only choose one auth method for all users? If it is possible to have multiple methods, how am I able to accomplish this?
View 1 Replies View RelatedUsing Windows 7 and router wont connect to the net..it asks for a key password and when I do that it doesnt connect..I have a good channel ..I had a windows XP on this before and no problem..bought a new computer with windows 7 and cant seem to get the router to connect and pick up the signal
View 1 Replies View RelatedI used to be able to connect to my internet with other computors but now it keeps saying we have the wrong password.
View 2 Replies View Relatedlaptops at home can not connect to wireless to internet when I set up a password to router
View 3 Replies View Related