On one of my computers one user cannot connect to Internet. The following message appears: �The Proxy Server is refusing connections. Firefox is configured to use a proxy server that is refusing connections. Check your proxy settings to make sure that they are correct.Changing users to another account and there is no problem connecting.This computer currently has an unresponsive keboard. The above changes and connections are accomplished using only the mouse.Runs on Windows XPHave posted the following thread in hardware:The keyboard on one of my computers is totally non responsive. The following message appears: �Windows cannot start this hardware device because its configuration information (in the registry)
I cant connect to internet but other user can. We use the same laptop but my internet connection was cut off whereas my son's internet connection on the same computer is working fine. I have used cable as well with no success. Obviously there is nothing wrong with the router or cable or wireless but there must be something wrong with my user settings. My son is using the same computer and can connect fine to internet as another user.
I have a wired adsl connection in location A. i know the user name and password. I want to connect to internet in location B but location B is very far from the location A.is it possible to use the same user name and password to connect to the internet.
I am unable to connect to the internet using my user ID,but when I login to the guest account I can successfully connect.I am using windows vista and Mozilla Firefox as my browser.
I have a laptop with 2 user account (one for me - administrator and the other for my eleven year old son). Connection is wireless. Until a few months ago everything was working fine and then the problems started: my son could no longer connect on the internet with Explorer and Google Chrome but I managed to connect it via Firefox. And it worked until yesterday. As of yesterday he can no longer connect to the internet even with Firefox. I tried again as an administrator to reinstall Google Chrome, but the icon is shown only on my user account. I took a completely new browser - Opera, but fails to connect. When I go to Diagnose & Repair connection problems - shows no problems. On my account everything is working properly. OS is Windows Vista Home Premium
We are running ACS 5.2 patch 6 and want to restrict access for users to be able to add devices to the system.For example, admin person in site A can only add devices into the site A group and cannot see/access other sites groups.
Two Access Switch(2960) are connected to each other and they are connected to Core Switch ( 6509), problem is the user's connected to Access switch cannot access Share drive which are on Servers , this servers are also connected to core on the first module ,,, so the user are not bale to open their share drive , it is opening but taking too much time?
I am currently configuring a Cisco 881 router and am having some vpn connection issues:I can connect with one user (me) and all other connection attempts form other users are denied. When I disconnect, other users can connect - the scenario is that only one user can connect at any given time.
Here is my config:
Building configuration... Current configuration : 11423 bytes ! ! Last configuration change at 13:11:23 PCTime Fri Jul 27 2012 by zephyr1 ! NVRAM config last updated at 13:25:30 PCTime Fri Jul 27 2012 by zephyr1 ! version 15.0
We are using an ASA 5510 and remote access (SSL VPN) using the AnyConnect client.
Is it possible to display a user message when a user connects using the AnyConnect client, matching a specific dynamic access policy? Can the message be displayed when the action is "Continue" rather than "Terminate"? I can't seem to get this to work and wondered if there was a LUA function to do this.
We have a DAP which gives a restricted ACL when the user's anti-virus is out of date, and I wanted to notify the user to update their anti-virus and reconnect.
We're planning to ope a coffee house for teens at my church. We want the internet to be accessible to them but want to restrict what sites they can access so homework, games, etc. can be accessed but not the stuff rated for violent, rrisky behaviors.
I have CISCO Aironet access point C1130 , but not able to connect by users, I can see below logs from access point.
Jun 13 17:50:10.686: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000 Jun 13 17:50:10.686: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247 Jun 13 17:50:15.678: RADIUS: no sg in radius-timers: ctx 0x10653F8 sg 0x0000 Jun 13 17:50:15.678: RADIUS: Retransmit to (20.33.100.11:1645,1646) for id 1645/247 [Code] .....
We recently switched from Centennial aircard to Verizon aircard (USB760) for our laptop. We have two user accounts on our windows 7 pc. With Centennial we could switch between user accounts without closing sierra wireless manager but when I switch to another user now, a message comes up saying vzaccess manager running in another account and we cannot use the internet until we have shut it down in the account it is running in - which is a pain. I have tried right clicking vzaccess manager in all programs and it does not have a share option. I also went to properties under vzaccess manager and found a setting to share and set it up but it still will not share
I have 2 desktops and a laptop accessing a wireless Motorola modem using roadrunner broadband. My desktop/Vista and laptop/Windows 7 are working fine. My older desktop with XP has a wireless card and shows that the wireless is connected with great signal strength but won't access Internet Explorer. I keep getting an error message. I have tried re-setting up the wireless and shutting down the machine ,etc. I have seen a few older posts that suggest downloading some software, etc
While I was at school there was a system in place where by you had to enter a user name and password to access the internet. Every student had a data limit like 3GB per month for example. I remember it had something to do with a proxy. I would like to recreate this system on my office LAN as some staff members have been downloading a lot slowing down the (very expensive) Internet connection. Limiting each users data will discourage large downloads.
As per topology attached herewith, i have 2 ISPs, ISP1 and ISP2. And i have one Cisco 1841 Router with only 2 Ethernet interfaces.My Lan subnet is 192.168.1.0.My puspose is, i want to configure both ISP1 and ISP2 and my Lan Network on router, without adding any extra interaface. I also want to configure a nat so that Lan user can go to internet. I wabt to do this using 2 Interfaces.
We have an ASA 5520 in production with a brand new internet feed we've just finished installing. We connect to our corporate office via a VPLS. In our corporate office we have a Cisco 1841 (I think that was the year it's made! ) with an ADSL feed with a static IP address plugged in directly.
We have a user VPN that we integrate with our user directory on the router, which connects via the ADSL. The users get an IP addres at the tail end of the 172.31.14.0/24 range, which is the same as one of our corporate subnets (we just reserver a few address, we don't have many VPN users).
Both the ASA and the router connect to each other (via the VPLS) on the internal subnet 10.255.255.0/24.
-The ASA is 10.255.255.1 -The router is 10.255.255.100
Currently the default route for the corporate office goes out the Dialer interface for the ADSL, which means that's where our internet goes out there (all proxying aside, we'll leave that out of this one). ip route 0.0.0.0 0.0.0.0 Dialer1
We'd like to change that default route to go via the VPLS to the ASA, and then out to the internet using the new feed. All the ACLs and rules are in place at both ends for this to work. If I change the default route on the router to: ip route 0.0.0.0 0.0.0.0 10.255.255.1Then it works as expected.
The problem is that then the user VPN breaks. I had hoped I wouldn't have to do any configuration on this but it looks to be so. I'm guessing that the VPN packets are coming in via the ADSL and back out via the new internet. It would be simple if the remote client had a static IP address as I could put in a static route for each user, but it's always going to be dynamic.
What do I need to put in place to get this working? I thought maybe I could leave the default route via the ADSL and put in a next hop rule to go via the VPLS for the specific subnets that need the new internet, i.e. have a subnet specific default gateway, is this possible? (I gave it a go but it didn't seem to work, I think I didn't implement it properly though as it still went via the ADSL, maybe because there is a nat route-map as well?).
We had setup a wired/wireless LAN using Cisco 881W router for one of our client. Wired lan works OK but we have issues with wireless. Users on wireless LAN can connect to the wireless network, but cannot browse the Internet. The wifi network does not give out an ip address to the client so client cannot get to the default gateway and Internet. Not sure what part of config does not work.
##### sh runn ##### 881WiFi#sh run Building configuration...
After pulling a brand new ASA5515 out of the box this morning, I spent countless hours scratching my head wondering why:
1. I cannot establish an HTTPS connection to the Management port - https://192.168.1.1/admin
2. When connecting via the console port I get prompted with a username and password sequence that I don't know
I get an SSL Version Error message when I try to connect with any browser. although I did find a way to resolve it, it requires a console port connection which is not working either.This is not my typical experience with the console or ASDM port setup.
how can I configure a Catalyst 3750, which interface is patched on the ISP router (internet uplink bandwidth = 20Mbps with) to allow all active users are sharing the bandwidth (either 5, 50, 100, user simultaneously..in internet surfing. right now it's like when a user starts a larger download that it uses the bulk of the bandwidth, and other users can reach all remaining extremely slow access times.
home users ------ internet ------ ASA 5510----- CORP LAN
we have anyconnect VPN and remote Ipsec VPN, i think the solution should works on both of them. my question is : "How to enforce home user internet traffic to VPN tunnel ?" we have "split tunnel" to pass only ""interesting traffic" to VPN tunnel access CORP LAN. but now , i need enforce all user traffic (internet +CORP LAN) pass through VPN tunnel. so far , i did what i know :
1. remove "split tunnle" from group-policy
2. the address in "remote VPN user address pool" are could be NAT/PAT through ASA5510
I have 5508 controller in my lab. I am working on a project to set up a public internet but with some condition.
- User should able to connect to the SSID without any authentication.
- Once user will connec to the SSID it should redirect to an external URL which indicates terms and condition and email address field.
- User should enter his/her email address in email addrss filed and click I accept button.
- Once that is done then he/she is allowed to access internet.
We are not sure how can we achive this as I do not know what should be the return value for WLC to allow that user to go through or what should be the settings on the WLC to redirect to the page.
I have seen a settings on web authentication for external URL but I guess it is only for username passwor or Radius authentication. While in this case I do not want to use any authentication just an accept buttor or Decline button and all good to go.
One of our customer , where there 2 6509 switch , one is Core_sw1 and other is Core_sw2 , catering about 32 Vlan , and HSRP in running for all Vlans , till here no problem , now there internet Router which having one Internet link , which connected and configured on Core_sw1 in a way that one interface of Core_sw1 is given Public IP and there is vlan 85 which internet vlan and vlan 85 ip are natted with that public IP with one simple static route given toward internet router , this is how internet is working ok.
Now i have configured vlan 85 in hsrp as all other are , how can give redundancy to vlan 85 user , that if Core_sw1 get down , internet traffic can get out through Core_sw2.using same internet router with single internet link .i am not talking of ISP redundancy , but Vlan 85 in Core_sw1 goes down , other Core_sw2 will server internet.
I am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
Few days ago I started to get the following error message while trying to connect to the internet using Chrome and IE:"Unable to connect to the proxy server..."I don't have a proxy server configured - nothing is checked in the LAN settings page.In Firefox I don't have that problem - it seems it gets the proxy configuration from elsewhere.
In my device I am able to browse through & connect to my HOME wifi network ; But after connecting it says 'No Internet Access'.I tried connecting with my SONY Bluray , iphone , ipad , laptops -- everywhere same story.I am able to plug in the ethernet cable directly from modem & able to connect to network.I am not able to open the http://192.168.0.1 -- ( When I am plugged in the modem directly)
Following are my router details
FCCID - KA2DIR601A1 IC : 4216A-IR601 H/W Ver:A1 F.W Ver:1.00 NA
I want to connect to the Internet small office where docsis (internet over tv cable) is used as WAN.For similar tasks but other WANs (adsl, dial-up) I used 800 series. But now I can't find anything in this series to solve my issue. There is 815 but it has no wi-fi.
I can use cable modem that my ISP gave to me: this modem acts as bridge so I can use router with FE-based WAN but it is better to have one device instead of two.
I suddenly can't connect to the internet using IE or Firefox every time I try I get the message "Internet Explorer cannot display the webpage". My connection on my wireless picks up great and shows signal strength as excellent. I took it to a place that was offering free check ups and they said that I caught a virus which I never seen any sign of catching a virus when it worked and that it had wiped out one of my hard drives and they could fix it for $229.00. I don't have that kind of money so I don't know what to do.
After i reinstall my PC, i can't connect my vaio (VGN-TX750P) to internet through internet cable nothing appears in Control PanelNetwork and InternetNetwork Connections wifi is working fine but I can't connect using ethernet
I come here today with a problem that has been plaguing this laptop forever and a day. You see, about two or so years ago on this very laptop, it was just another day where I booted up my laptop and was going to get a good day of wasting time on the internet underway. I tried to open Firefox, and I got prompted to download an apparent update for the browser. Obviously I went along with it because it seemed pretty routine and identical to how Firefox had updated in the past.
After the update was all done and dusted, I found myself unable to connect to the internet through Firefox. I would just get a constant stream of "Unable to connect" messages. I thought it might have been a problem on my end since back then I had rather wishy washy internet. So I let it settle for a while. Later on that day I talked to a few of my buddies over Xbox Live and asked if they'd had any similar issues with the new Firefox update because at the time, we all used it and hadn't quite jumped ship to Chrome just yet. But no matter who I asked, I always got the same response "I didn't get any update." Which as you can imagine, confused me quite thoroughly.