Routers / Switches :: Setting Up Password And Configuring SSID?
Jun 30, 2011
If you have two wireless routers on the same private network. On configuring the second router's password and SSID I know the second wireless routers DHCP must be turned off.Can you explain step by step on configuring the second wireless. Must the second wireless be connected to the internet. If yes, how? Must I take the first wireless router off the modem and connect it to the second wireless router for internet connection. (Problem with that is connection from the ISP)
View 2 Replies
ADVERTISEMENT
May 31, 2011
I have an operating router with no problems, but I need a secure network.on setting a password for my TP-Link model TL-WR941ND router
View 3 Replies
View Related
Jul 3, 2011
i set up the WAP4410N and it can be connected with our router. But it's not protected by our password, but once i have set the password of WAP4410N by changing the security mode to WEP, now i will prompted to password when I connect the AP, but it shows limited connectivity, I can't even access my local LAN resources at all.
View 2 Replies
View Related
Mar 27, 2011
In the past couple of years, I've picked up a couple of Linksys WRT54G routers for a buck or two at flea markets. I hadn't thought about the fact that no assigned SSID or Password came with them. I downloaded the Linksys set-up files from their website and recently set up both of them for relatives. They work great but they are "unsecured networks". I'd like to change that.
View 2 Replies
View Related
Feb 12, 2012
I need the ssid or network name to install a printer, and apparently you can find it on the router's setup page. I have a Sagem@Fast 800 E3 - where do I find the setup page?
View 1 Replies
View Related
Jan 5, 2013
How do I set up my N750 so that I can give my network my own name and my own password? I do not have the CD.
View 1 Replies
View Related
Sep 18, 2011
I am following instructions I found to set up my wirelss network, but am having trouble configuring my router. I'm specifically at a standstill, because I can't connect to http://192.168.1.1. I pinged the router and got a response and went to run/ip config to confirm I have the right URL for the router, but still not able to get to the URL.
View 1 Replies
View Related
Mar 10, 2012
how to installs 3 router with same password
View 2 Replies
View Related
Jun 8, 2011
I have large bunglow with 2floors,I would like to have a wireless internet setup in bunglow using 3g usb modem type of internet connection.Advise which router to be used so that I can get good wifi connectivity all over the place so minimum 4 people can use it simaltaneously.
View 1 Replies
View Related
Jan 22, 2011
I am trying to connect my xbox360 to my belkin surf n300 router via ethernet cable and my xbox360 cant recognize or get onto my network. i have manually entered the ip address the submask and gateway numbers, idk if they are 100% correct
View 1 Replies
View Related
Jun 13, 2012
I have a 4-port Netgear modem/router (DG834), and need to distribute its Internet connection according to the following criteria:
1.There are 11 access points (3 wired, 8 wireless) across 4 floors of a building - all cabling is from a central point, which will connect through a switch.Cat 5e cabling is in place.
2.The wireless points need Power over Ethernet connections
3.The 4 router ports serve 2 PC's and a printer in an office, the fourth being the connection to the switch.
4.There must be network separation so that:
- all points have Internet access
- there are three separate groups - one for the office, one for staff (wired) and one for guests (the wireless points), the purpose being to ensure that no user in one group can access any user's device in the other 2 groups. I'm assuming VLAN is the method for this.
5.Traffic on the network is likely to be fairly low casual use of the wireless ports, the office PC's only being used for Internet access and email no transactional systems, large databases or other resource / network-intensive functions.
1.Both the Netgear FS726TP and GS724TP look as if they will do what I want, using WNAP210 wireless access points. Could I achieve the same outcome with 2 x GS108PE switches? Any other hardware recommendations?
2.Do I need any additional hardware?
3.Are there any other considerations I have not thought of?
View 10 Replies
View Related
Jun 8, 2011
I have a big 2 floor house .I would like to use 3G connection using USB type of modems,like vodaphone or MTS. which router to be used so that I can get good connectivity on both floors. NOTE- I do not want to use cabled internet coonections.
View 2 Replies
View Related
Mar 22, 2011
I am migrating an a group of workstations that run a fire system from one software to another. The current workstations run the following info:123.123.123.xxx 255.255.255.0The new workstations run:100.100.100.xxx 255.255.255.0There is a central switch location using a GE-DSG-244 Layer 2+ Managed switch. There are two remote location using GE-DS-82 Managed Switches.The two networks must remain isolated, yet use the same fiber communications. The central switch connects to the two location using MM Fiber. From my research I believe I need to use the 802.1q standard to allow port trunking between the two switches.
View 7 Replies
View Related
Jun 21, 2012
I lost my 192.168.1.1 password and how to reset it?
View 1 Replies
View Related
Apr 2, 2011
cannot get acess to router to put a password with 192.168.1.1 and my default gateway showing 2002:c058:6301::c058:6301
View 11 Replies
View Related
Mar 29, 2013
what to do with my router cdr -king i cant access 192.168.1.1 in second time. i access it for the first time but i forgot to configure password now i cant connect using ID:admin Pass:admin
View 2 Replies
View Related
Feb 26, 2011
I can't find my netgear password
View 1 Replies
View Related
Jun 21, 2012
I lost my router 192.168.1.1 password and how to recover?
View 3 Replies
View Related
Mar 2, 2011
how to create a password to access one pc to another pc .like i have 3 pc it is connecting throw switch .ip addresss is 192.168.1.1,192.168.1.2, 192.168.1.3 i want access from 192.168.1.1 to \192.168.1.2 like this here i want to create login password and how to remove password
View 1 Replies
View Related
Jul 17, 2011
I have tried to reset linksys router and tried to use the IP address with an error message. We need to add another laptop to our network
View 1 Replies
View Related
May 24, 2011
My d-linl router was not working and I pushed reset button and it went back to factory setting. I don't know what the factory setting is and I want to put my own password but don't know how. I have Window 7?
View 1 Replies
View Related
Jul 27, 2011
Can't reset password on router, have followed steps. want to secure network
View 2 Replies
View Related
Aug 4, 2011
I have a wireless router at home and i have a PC and a mac enabled for it. I have recently bought an IPAD and i can't connect for some reason. When asked for the password it doesn't enable me to connect so I'm worried that i've forgotten my password.
View 4 Replies
View Related
May 31, 2011
I need to add a password but don't have the set up disc how can i set a password for it
View 1 Replies
View Related
Feb 11, 2011
I have a kindle which was successfully connected to my router at Christmas 2010 unfortunatley some thing went wrong ?? have tried using the long serial number which i assume is the password on router . Kindle is telling me the number invalid try again. I have Sky broadband . The Kindle remembers the SSID; number . i have network key number as well but not sure what im suppose to do.
View 2 Replies
View Related
Jul 12, 2012
I don't remember the password for my wireless router.
View 4 Replies
View Related
Aug 16, 2011
the name of my wifi network changed and I do not know why, therefore the password for the former name will not work with the new network name
View 1 Replies
View Related
Oct 19, 2012
The wireless router PW has been changed, I got the new one correct but upon entering it on my laptop it goes around circle showing,"Wireless network detected" and then,"Unable to connect to preferred wireless network"It never works. I don't know how to fix this problem. It did not happen on my iPad.
View 2 Replies
View Related
May 15, 2012
lost my password-can't connect my new nook to my network.
View 1 Replies
View Related
Feb 4, 2011
i have dlink dwl g700ap wireless access point.. router will show default and no password. i try to connect by ip 192.168.0.050 as per manual guide by cannot.my default gateway is 192.168.1.100 taking lan wire from builing internet that used cisco.
View 1 Replies
View Related
Mar 5, 2011
I have a linksys wrt54gs wireless router (working fine since last 3 years) which connects to the internet fine if there is no password set. However if i set WEP password to protect the wireless connection, i am not able to connect to the wireless connection. Everytime i enter the passphrase, when trying to connect to the wireless network, it refuses to accept the password. I have tried this with 2 laptops (both running windows 7) and both have same issue.
View 2 Replies
View Related
Feb 6, 2012
i want to change my username and password of my router cw-5354 of cd-r king but the default user and password doesn't work anymore so i can't access the control panel.
View 3 Replies
View Related
Jan 1, 2012
new instal will not give me page to enter password
View 1 Replies
View Related
