I have a problem. Yesterday I have upgraded both my SG300-20 switches to firmware v18.104.22.168. Now I cannot login on of my switches, unknown username and password. I am absolutly sure I have the password, because they are the same and I just upgraded it. I have re-booted the switch, but without any luck.
I got a D-Link router not too long ago and I set it up in an odd way, the router password I gave it during the setup would not be accepted but the Network Security Key (the randomly generated alphaneumeric code) was accepted. I used it to connect all of my wifi devices.
The router password (which doesn't work), the "network name (SSID)", the network security type, and the network security key were all saved on my desktop. My computer has since suffered a critical crash and had to have it's hard drive erased. I still remember the password, the network name, and the security type. But the NSK (the thing I need to connect in place of a password) has been lost. It was this long random string of letters and numbers that I couldn't remember for the life of me.
I also remembered my Admin password, so I am able to log into http://192.168.0.1, but in here I only know how to change the regular password. I don't know how to access or change the NSK. change the security setting so that I can use the actual password instead of the NSK? Because of the crash I lost my iTunes libraries so I'm going to have to reset all my iOS devices, which are primarily what I use wifi on. If I reset them, they'll forget the wifi network and the assosiated NSK password, so I won't be able to use wifi at all.
I have a wireless router that was named and all the wireless equipment (laptop, ipod, phones) was connecting easily with no problems. Everything is saying "unable to connect". I have no clue what she did but she said her laptop asked her for the 8 number code from the router and she entered it.
i tried to change my nat type to open, on my Netgear WNR2000v1.i connected throught typing my routers ip. (192.168.1.1)i watched a utube video, where someone told me that i had to changed something in the basic section to 2, instead of auto.now i cant connect to my router. ive tried with multiple pc's.
how to create a password to access one pc to another pc .like i have 3 pc it is connecting throw switch .ip addresss is 192.168.1.1,192.168.1.2, 192.168.1.3 i want access from 192.168.1.1 to \192.168.1.2 like this here i want to create login password and how to remove password
My d-linl router was not working and I pushed reset button and it went back to factory setting. I don't know what the factory setting is and I want to put my own password but don't know how. I have Window 7?
I have a wireless router at home and i have a PC and a mac enabled for it. I have recently bought an IPAD and i can't connect for some reason. When asked for the password it doesn't enable me to connect so I'm worried that i've forgotten my password.
If you have two wireless routers on the same private network. On configuring the second router's password and SSID I know the second wireless routers DHCP must be turned off.Can you explain step by step on configuring the second wireless. Must the second wireless be connected to the internet. If yes, how? Must I take the first wireless router off the modem and connect it to the second wireless router for internet connection. (Problem with that is connection from the ISP)
I have a kindle which was successfully connected to my router at Christmas 2010 unfortunatley some thing went wrong ?? have tried using the long serial number which i assume is the password on router . Kindle is telling me the number invalid try again. I have Sky broadband . The Kindle remembers the SSID; number . i have network key number as well but not sure what im suppose to do.
The wireless router PW has been changed, I got the new one correct but upon entering it on my laptop it goes around circle showing,"Wireless network detected" and then,"Unable to connect to preferred wireless network"It never works. I don't know how to fix this problem. It did not happen on my iPad.
i have dlink dwl g700ap wireless access point.. router will show default and no password. i try to connect by ip 192.168.0.050 as per manual guide by cannot.my default gateway is 192.168.1.100 taking lan wire from builing internet that used cisco.
I have a linksys wrt54gs wireless router (working fine since last 3 years) which connects to the internet fine if there is no password set. However if i set WEP password to protect the wireless connection, i am not able to connect to the wireless connection. Everytime i enter the passphrase, when trying to connect to the wireless network, it refuses to accept the password. I have tried this with 2 laptops (both running windows 7) and both have same issue.
I want to setup an home network with a wireless router and use multiple switches for wired connections through out my home. I currently have an Airport extreme hooked up to a cable modem and a leviton gateway hooked up to the Airport. The 2 computers connected to the Leviton are on a windows 7 homegroup and share fine, but won't share or discover any wireless device connected to Airport. My main goal is to have a wireless/wired network with all computers sharing information with each other. I want 2-3 wired switches/gateways with a min of 2 devices connected to each, connected to my wireless router whiich is connected to cable modem.