Linksys Wireless Router :: WRT350N - Workgroup PC
Jun 10, 2009
I have a wrt350n at home and it works fine but it has only one little issue. When I connect my lap wireless I cant see the other work group pcs but if I wire the laptop there is no problem. I use ip to share files and not net bios but sometimes it would be great to find all the pcs on the work group easily and not memorize all the ips.
Disabled firewalls, updated firmware, tried to change network ip... nothing solved. Have no problems at work with an WRT54G.
View 2 Replies
ADVERTISEMENT
Aug 2, 2011
I have the WRT350N router. to access my usb storage link from within the LAN it asks for user id and password as I want it. but to access it from outside my LAN it just connects without asking for user id and password. My guess is it has something to do with shares and how they are setup. I can't figure out how to set it up so it asks for user id and password when attempting to connect to my storage link from the net?
View 1 Replies
View Related
Dec 26, 2012
I am having issues with the WRT350n where I am getting an "No internet access" message. When I look at the wireless network connection I can see the wireless router and it says "connected" but when I scroll my mouse over the icon, it reads "No internet access". I try to access a webpage and it will not work. I originally had it connected and working properly in my home. However, I removed it and tried connecting in my office and started experiencing this problem. I did not run the setup using the CD provided. I just unplugged it from my home network and reconnected it to my office network, of course with a few passphrase changes and wireless MAC filters only allowing certain PC's to be able to access the internet. I double checked all MAC addresses of each device that I entered into the table and they are correct. All devices see the wireless network but cannot access the internet. Any suggestions? Should I re-run the installation using the CD?
View 1 Replies
View Related
Jul 17, 2011
I have my WRT350N setup. all computers within my LAN can access my usb storage device. I can not access my usb storage device using a computer outside my LAN.
if you log on to 99.225.89.229:8080 it will ask you for user id and pass word to log into my router.
if you try to log on to 99.225.89.229:21 it wont even connect asking you for a user id and password.
my guess is the router is not allowing port 21 to be accessed, but I'm not sure.
View 2 Replies
View Related
Oct 20, 2007
When upgrading with .bin file (v1.05.8) via Administration - Firmware Upgrade, it fails when status showing 76% completion.
View 4 Replies
View Related
May 23, 2012
I have a Linksys WRT350N which I am trying to use an app on my iPhone to connect to my server using the public/external IP of my cable modem. I have the necessary ports opened and also tried adding the server to the DMZ but no matter what I can not get the app to connect to my server via my external IP when I am on my WiFi. I can connect without any problems if I use the NATed IP on the server when my phone is connected to the WiFi. It also works fine connecting to the external IP if I am on any other WiFi or the cellular network (which shows ports are forwarded correctly). I just can't connect to the server when I use the external IP and I am on my WiFi network. This is annoying as I need to keep changing the app's settings back and forth between the external and internal IP whenever I am home or away. I am left thinking this is some kind of issue with the WRT350N not allowing local internal traffic to reach the external IP. Any way to resolve this, maybe by entering a static route?
View 2 Replies
View Related
Jan 4, 2012
I tried to upgrade the firmware of my WRT350N but while upgrading my wife switched on the oven and.... yes, power down -> the upgrade has been interrupted. Now the router is no longer responding, it shows just the green power light on (not blinking). I tried all the resets I found googling (pressing the reset button for 30 sec, isconnecting power and reconnecting it again) but no way, there's no way to ping the router at its default address 192.168.1.1. All the leds are switched off (internet, usb, wireless, security) except the green power light. Is there another way to have it back or it is definitely lost?
View 6 Replies
View Related
Mar 6, 2007
Has anyone managed to access the Storage Link from the internet on the WRT350N router? I am on my second one and it still doesn't work. Also the configuration restore does not work either.
View 9 Replies
View Related
Aug 2, 2011
My storage link drive is accessible from my lan requireing a userid and password, but it can be accessed from outside my lan through ftp without userid and password. how do I change it so it requires a password from outside my lan when accessed as an ftp drive? I have the WRT350N
View 1 Replies
View Related
Sep 15, 2011
I have a Dell Wireless 1500 draft N adapter that only connects at G speeds in mixed mode. I tried N only mode and my adapter will not connect. I have tried N mode Auto and 40hz wide and nogo. I have tried TKIP + AES and AES and nogo.
View 1 Replies
View Related
Apr 7, 2012
I recently upgraded my internet speed service from my ISP (Brighthouse). They installed a gateway to replace their old modem, but I have had it bridged so it should act as a modem. Speedtest.net shows downloads on the order of 40-50 Mbps and uploads around 5 Mbps. If I try doing something interactively that pushes the speed and size of files (like flying over Google earth using my mouse to guide the direction and speed) my connection seems to hang. I have to reset the router (unpower and repower it) to get my internet connection to work. This has also happened when I quickly downloaded a series of large images - I click to get the next page fairly soon after the current page has finished downloaded. My router is a WRT350N.
View 6 Replies
View Related
Aug 16, 2012
I have this WRT350N with me for a long time. It always worked well, and for a while I didn't used it (like 1 year). Last morning, I set it up and put it to work again and it worked perfectly, but in the evening the wireless stop working. Through cable, the internet works finely.
The light does not turn on or blink anymore. The router setup says that SSID broadcast is enabled. But I can't find the network, even if I type its name and password (supposing it was in invisible mode or something like that).
So I restored the router to its normal configuration, and once again the wireless does not work. Is there something else I can do to make the wireless work again?
View 5 Replies
View Related
Nov 28, 2012
I have a win7 desktop upstairs with all of my media on it.I also have a winXP laptop that I would like to use as a media center running xbmc connected to my tv downstairs.I have set up a workgroup so my laptop can access the media stored on my desktop and everything works great when they are both hardwired to my router (Linksys E3000).However, as soon as I unplug my laptop from my router and switch to the wireless connection I can no longer ping my desktop or access the shared folder (internet still works fine on the laptop, it just cant see my desktop anymore).If I plug it back in to the router, everything works again.
The exact error message I get when I try to access the shared folder is "\INFINITYMedia is not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. [code]
View 14 Replies
View Related
Feb 21, 2013
Region : Others
Model : TL-WR1043ND
Hardware Version : V1
Which WORKGROUP does router have for sharing? I need this, because I have WD TW live and want to access routers usb hdd through sharing. Because router media server only supports up to 100 files, I see no other solution.Is there anyway to set the workgroup
View 1 Replies
View Related
Feb 11, 2013
I am new to dealing with domain setups and Windows Server. Here is my setup:
Comcast business cable modem
Gigabit Switch
IBM x3100 M4 w/Xeon E3 1230, 16GB ECC DDR3 RAM Running SBS 2011 Standard
Custom PC with Win7 Pro, i7 3770, 12GB DDR3 RAM
What I would like to do is setup sbs 2011 as the domain controller and have the custom pc on that domain.Comcast business cable modem/router is set for defaults, handing out dhcp.
Both Server and custom pc are hooked into the switch which is hooked into the comcast router.SBS 2011 I believe I set it up with the default settings. Updated it so all the patches are on it. It sees the comcast router and connects to the internet no problem.
Custom PC is sees the comcast router no problem and gets its ip address from there like normal.When trying to join the domain on the sbs computer the custom computer cannot find it even though I can ping the server.
View 13 Replies
View Related
May 9, 2011
My partner and I have 2 notebook PCs and we have a wireless moden/router. I used to see my partner's PC in the Workgroup and share the printer before I reloaded windows XP Home in partner's PC. I added his PC to the Workgroup but can't see him in Workgroup from my PC anymore?
View 2 Replies
View Related
Jul 21, 2011
I have an older Linksys 11g router, two pc's with Windows 7 and a bunch of PC's with Windows XP that I need to LAN.Is there a simple way to do it?
View 1 Replies
View Related
Feb 12, 2012
Network Diagram
Ping Results Table
Configurations for 1811 router, ap1121g root access point, ap1121g wgb.
Referring to the attached network diagram, I cannot communicate past the ap1121g-wgb in either direction. Also attached is a result table of ping attempts through the ap1121wgb from each side. I don't have a problem with the wireless connections. The ap1121g's associate ok. Based on the ping results the problem appears to be in the ap1121g-wgb configuration. The following two cisco documents have been my main reference, besides the cisco command lookup site.URL
View 17 Replies
View Related
Nov 18, 2012
Client has a building that is located 300Ft apart and would like to provide IP communications for 3-4 IP hadsets back to an IP PBX. They do not want to dig up the parking lot so we proposed using a wireless bridge. I noticed that Cisco discontinue the 1300 and 1400 Wireless Bridge. Can I use a 1262 with external antenna in Workgroup Bridge mode to perform this functions? I will put a Layer 3 switch on both ends to route traffic (3560C-8). Should I use the Yagi antenna's for outdoor use?
View 1 Replies
View Related
Feb 21, 2012
We have some rolling carts used for telemedicine and are currently using Linksys WET610N wireless bridges. I haven't been very impressed with them - I have to reboot them at least once a week and figure it's a roaming issue. Since they are a residential product they probably weren't designed to do a lot of roaming.I started playing around with WGB and setup an 1142 AP and got it to work. Unfortunately, the only place I can put the AP is inside the cart and the metal top seems to be interfering with the wireless signal.
View 1 Replies
View Related
Feb 16, 2013
I have an old computer with dead wifi nc and I thought that bridging it with was121 should work, but can't find anywhere any comprehensive documentation on how to set it up.
View 1 Replies
View Related
Dec 4, 2012
i am trying to expand the wifi range of my WRVS4400n. Since the WAP4400 is'nt available i got me a wap321, since it was mentioned as recommende replacement. However i am having trouble in getting the bridge to work.First i tried to use WDS but this only killed my WRVS4400n and i am now trying the Workghroup Bridge mode on the WAP321.
On WRVS4400n i have enabled WDS and have tried both auto setting and Manual without any difference I am stuck with this status on the WAP321:
Network Interface Status and Statistics VLAN ID Name (SSID)
WLAN0UPSTRM Disconnected 1 myssid
WLAN0DWSTRM Up 1 myssid
It is the Infrastructure Client Interface setting that fails, i've tried both None and WPA pesronal Security setting with same result: Disconnected
View 6 Replies
View Related
Apr 21, 2013
Does Cisco CleanAir 1602i (standalone model) support Universal Workgroup Bridge? I read the release notes 15.2 but I couldn't find it.
View 7 Replies
View Related
Mar 18, 2013
Any sample configuration of c1310 as a work group bridge.
View 2 Replies
View Related
Nov 14, 2012
I have Cisco 1242 setup as a work group bridge. Is there a rule of thumb on the max number of wired clients that can be connected at one time?
View 1 Replies
View Related
Feb 21, 2013
I am trying to enable the workgroup bridge mode on the 5ghz 802.11N radio of a Aironet 1262N, but when I select the workgroup bridge mode from the GUI the radio becomes disabled. If I select the Access Point role from the GUI then the radio instantly becomes enabled. The same thing happens if I attempt the same procedure with the 2.4ghz radio as well. I can get the radios from both bands enabled if I select the Access Point role. I made sure to check that both radios were not set to workgroup bridge as well. I am running 12.4(25d)JA1 code on the AP. This is my first time working with this type of AP.
View 2 Replies
View Related
Dec 15, 2012
Region : Canada
Model : TL-WR1043ND
Hardware Version : v1
Firmware Version : 3.12.22 Build 120424 Rel.39632n
ISP :
I can access the USB storage via FTP, but I wanted to access files using a Windows Explorer format. Also, anyone access the Media share ? Manual tells you how to setup the USB functions but not how to access from a PC.
View 1 Replies
View Related
Dec 15, 2011
I have tryed to setup Lan connection on 2 PC to share wireless conenction from one to other PC.I have setup a few things but 2 PC cant see each other in workgroup(they have same name of WG).....soo i have try almost everything but didnt fix it
First PC(Host):Win XP PRO SP3
Second:Win XP PRO SP3
View 11 Replies
View Related
Oct 15, 2012
How do i add a computer to a workgroup?
View 1 Replies
View Related
Jun 9, 2011
I cannot join domain it saying that "Computer name changes", A domain controller for the domain MyDomain could not be contacted.”. We have domain and workgroup, Actually first its already joined the domain, but I want to map the sharedrive inside the workgroup but I cannot map. Then I change to join workgroup. After I boot up I cannot log in with that user, I log in with administrator and the user is dissappear in the "User Account", but the profile inside document and setting still left surprise. I don't know why Now I create one more user, it can map to share drive also share folder. also can see all other network computer. But only left one is I cannot join the domain. I need this one because of we don't let our user using as administrator account. Before I testing this one I should backup, but now the time
View 2 Replies
View Related
Mar 18, 2011
I have a desktop PC running WinXP I recently got a laptop running Win7. I Set both of them up with the same workgroup name, and now my XP machine can see and access my laptop, but my lap can't see my XP machine. If it makes any difference, I can remote into my XP from my laptop, but that's not what I need.
View 3 Replies
View Related
Feb 2, 2011
We have two different groups in network say 'A' and 'B'. My network is B. I can view the computers in my group simply by clicking "view workgroup computers". I wonder how I can view the computers in group 'A'
View 2 Replies
View Related
May 11, 2011
I have two computers, one that is running Windows XP SP3 and the other which is running Windows 7.My aim is to access a folder on the Windows 7 computer from the Windows XP computer via the workgroup.When on the Windows XP computer, I cannot view Workgroup computers.I have disabled Windows firewall & uninstalled my other firewall.The XP computer can ping the Win7 computer by name and local IP. However, the Win7 computer can only ping the XP computer by local IP and not computer name.
View 1 Replies
View Related
