Cisco WAN :: Configure 1130AG From Scratch?
Feb 25, 2013
I'm trying to configure the 1130AG from scratch but I'm not having any luck. I tried using the IPSU utility and entered the MAC address but it errors, "The device does not answer". I have connected it to a network so it can get an IP from DHCP but it doesn't respond. And when it boots up from factory reset there is no SSID broadcast for me to connect to. I have tried connecting through the Ethernet port and the Console port to my computer but no luck.
View 3 Replies
ADVERTISEMENT
Jun 30, 2011
I am trying to develop a firewall from scratch in linux environment using C. Actually its more of a Unified Threat Management sysytem .which features to include like antispam, content filtering, vulnerability analyzing,etc.I have exactly 1 year to complete this project which features can be coded completely in time. Actually I have broken the process of development in 4 stages namely :
1. Capture the packet (using libcap)
2. Break the packet into headers and data (using libpcap)
3. Analyze the headers and data and make a decision
4. ACCEPT or DROP the packet
Its the third step that will depend on the features which are included in the project. I plan to code using the UNIX Socket API.
View 1 Replies
View Related
Aug 19, 2012
I just upgraded an ASA-5510 from 7.0 to 8.4.4-1 and theres a lot of stuff in it I don't recognize that I never added, mostly because of new network objects, nat commands, and other migration stuff. Its been awhile since I've configured the ASA and I think I'd like to start from scratch and clean it up a bit because theres so many lines for so little that I really need.
I have a 5510 assigned an IP address on the outside interface with 3 inside interfaces and below are the only requirements I need.
Network-A (192.168.1.0/24)
- incoming ssh port 2202 goes to node 192.168.1.2
- incoming ssh port 2203 goes to node 192.168.1.3
- handle incoming https (443) requests
- handle incoming www (80) requests
- cannot see Network-B or Network-C
Network-B (10.0.0.0/16)
- ssh to nodes on Network-A
- incoming ssh port 22 goes to node 10.0.0.20
Network-C (192.168.2.0/24)
- ssh to nodes on Network-A
- incoming ssh port 2210 goes to node 192.168.2.2
ASA-5510
- sends logging to syslog node 192.168.1.3 on Network-A
- there are DNS and NTP servers located outside
View 1 Replies
View Related
Nov 25, 2012
Today the power was fallen out in our area and the rv042g was turned off.After the power was back I was checking the router because some trafic didn't came through.Then I saw that all the services were messed up and also all the firewall rules were wrong.the lines were still there but it all was setup as [all 0-0].
After trying to restore a backup it gave me the same, even after resetting the router with the reset button for 30 seconds and doing a restore it didn't work.So I had to reconfigure the router from scratch.This services thing gives me a real pain in the *** because in a previous topic I also have mentioned that something is wrong with the services.
View 6 Replies
View Related
May 30, 2012
I had my network running seamlessly for years, I set it up using a guide from a magazine and had both wired and wireless working A1 and originally it was all win xp pro, 2 desktops and a laptop but got a macbook pro and got that using printer, sharing fies etc. All no problem and it was all easy peasy BUT I have mucked up big time and I think it was because I downloaded some system cleaning software, advanced care, toolwiz and pc pitstop but I was not paying attention and I am sure I clicked a few buttons I should not have done. Result disaster, no longer can share files or print etc.ll I want to do is reset everything and start afresh but how do I do that? I use a netgear router with norton security on main desktop. I have a wii, an xbox, apple tv running as well along with 2 desktops, a laptop and a macbook pro. Tried a few things but nothing worked, when I click on network places I get a list of shared folders but end location shows internet! I have to use netgear switch boxes as well but should not have caused the problem.
View 4 Replies
View Related
Sep 13, 2011
We are about to install a new VoIP system (Allworx, which I did not select) and need to set up a new VLAN with QOS quickly for my SG 300 and SG 200 switches. I have the default VLAN1 at 10.0.0.0/24 and will be setting up VLAN10 at 10.1.0.0/24 for voice. There are a few other VLANS on the switches as well. I really don’t get the particulars of using a Voice VLAN vs. Smartport, but is one better than the other for this and what would be some good default settings to start with. I have command line and VLAN experience; I just haven’t set up a VLAN for voice from scratch.
View 1 Replies
View Related
May 19, 2012
Our home situation is: We have 3 Mac computers, 2 PC's (all home/office use) and loads of phones and other equipment. Each computer stores files independently, there is peer-to-peer wireless sharing (through the OS) but no true central file sharing.Our existing network situation is: We have O2 Broadband but don't use the O2 equipment. We use a Netgear ADSL2+ modem (delivering 5/6-7meg) connected to a Time Capsule that offers us home backup for our Mac computers and also acts as our wireless router. We broadcast in dual-band 802.11b/g and 802.11n simultaneously (as there are a range of systems that need different bands). We then use 2 Apple AirPort Express access points around the house to extend and amplify the signal - although these can sometimes be temperamental.
View 12 Replies
View Related
Jul 10, 2011
I have decided build an open source firewall in linux environment. I have exactly one year to complete this project. The firewall will be a stateful packet filtering firewall working at network, transport and application layers. I would also be provided log analysis features. What I want to know is whether this is a good enough project or put in other words, is it a worthwhile project to undertake?
View 13 Replies
View Related
Jul 26, 2012
I'm trying to access the web setup page and I'm being asked for the user name and password. I have the password from the initial setup written down but apparently didn't also record the (changed) user name. It's not "admin" (tried that - and just leaving it blank - already).
Is there any way to recover the correct user name short of resetting the router and setting it up again from scratch?
View 9 Replies
View Related
Apr 27, 2012
I have 100 nos of cisco 1130AG access points and I upgraded the ios for one of the access point.
the existing image is c1130-k9w7-tar.124-21a.JA1
upgraded image c1130-k9w7-tar.124-25d.JA.
what is the advantage of upgrading the ios.and i want to upgrade the image to all the access points at time?
View 1 Replies
View Related
Jul 10, 2011
I have two ssid's on my 1130ag each with different security when I use wep I can get my email on my droid. When i connect to the second ssid and use wpk I can get to the in the Internet but my email will not move in Exchange.
View 3 Replies
View Related
Feb 13, 2013
I have a couple 1130AG switches. I'm trying to pull an image file from the flash on a Cisco Air AP1131AG. The file is c1130-k9w8-mx.124-23c.JA4.tar. The issue that I'm seeing is, I do not see a copy command to go through the tftp process. I've tried to use tftpd32 and enter the IP of the AP as the remote host, but that is not working either. Do I need to connect an ethernet cable straight to the AP in order to use Tftpd32, or can I use a console cable?
View 9 Replies
View Related
Aug 7, 2011
I am trying to join my 1130AG-E-K9 AP to my 2016 WLC, but it is stuck in a boot loop and will not connect to the controller. [code] I found some details here: url... but I'm not sure what it means that I have a 'SSC AP'. I am not local to this AP, though I do have a console connection to it-what do I need to do to get it working again? It just continually goes through this error and reboots every 30 seconds or so, so it's useless at the moment.
View 3 Replies
View Related
Jul 4, 2012
With this customer they have 4 floors with on each floor a Cisco Aironet 1130AG. At the moment they are using WEP as a protection with a really long key. The users find this annoying, but I am more concerned about the security perspective. So I want to implement WPA2 with a shorter key for the people to remember. On one floor, I also want to add a public network when other people want to connect and just need internet access. How to change the current set-up and regarding the security and implementation. If all of the Access Points could work togheter and just be 1 wireless network. I don't know if this is possible and how to do it? For the public network I know there also need to be some changes in VLAN's. The firewall is a cisco ASA5505.
At the moment I am running this configuration: I tried setting up this with the GUI, but it doesn't look like the configuration at the moment is shown in the GUI or maybe I am just looking in the wrong places. [code]
View 1 Replies
View Related
Jan 24, 2013
I am currently trying to get eap-tls user certificate based wireless authentication working. The mismatch of guides im trying to follow has me coming up trumps with success so far.
My steps for radius:- (i think this part ive actually got ok) [URL]
Steps for the wireless profile on a win 7 client:- this has me confused all over the place [URL]
My 1130 Config:-
[code]
Current configuration : 3805 bytes
!
! Last configuration change at 11:57:56 UTC Fri Jan 25 2013 by apd
[Code].....
View 14 Replies
View Related
Jun 19, 2012
Where is the link to download recovery IOS for AP1130AG.
View 4 Replies
View Related
Sep 4, 2012
Configuring a Cisco 1130 AP (autonomous) to a 1861 router.
I am struggling to work out how to connect this and get it working.
Router has 2 v lans, VOICE and DATA. All switch ports configured for access v lan (DATA) and voice v lan (VOICE)
We need the AP to have an SSID for VOICE and DATA and the gateway/DHCP server for each of these to be the router.
View 1 Replies
View Related
Oct 17, 2011
I got a problem with a ap that I have here where I do not have the password and I did the process to reset the AP to factory defaults, but the configuration still the same, and the AP still asking for the enable password, its the same problem poused before in this link URL. I did the same process but I still have the old configuration on the AP. I noticed that the AP change the image when I reset the AP, using the mode button. the AP is starting with and rcv image. I need to reset the AP to its initial configuration.
View 9 Replies
View Related
Feb 12, 2013
How would I configure a "guest" wireless network, with a different key/password, that uses a different subnet than the existing network?
We have a simple 192.168.1.x subnet currently, with the Aironet as our only AP. The Aironet support a "guest" wireless function, but how do I make that work with the RV180?
View 1 Replies
View Related
Mar 29, 2012
I'm working on creating an open wireless scheme and we are simply going to use WPA with a key. What I'm getting a little stuck on is preventing access, by the guests that will connect to the WAPs, to the gateway/management webpage. I've been looking into seperating with VLANs and trunks (internal with management access and external for guests) but having a hard time with the configuration scheme.
Not sure if there is an easy way to just block that in the config or what.
View 1 Replies
View Related
Oct 1, 2012
I'm trying to set up this 1130AG with a private wireless network and a guest wireless network. Initially it had just one wireless (private) and it worked fine, but then when I created the two VLANs for each SSID and then the guest SSID and now the guest SSID is visible/broadcasting, but the private SSID has disappeared or is off.
P.S. - It's a Cisco Aironet 1130AG (AIR-AP1131AG-A-K9) running 12.3(8)JEA system software and I'm using the web GUI (I'm not familar with the command line for Cisco products yet).
View 4 Replies
View Related
Feb 10, 2013
I have multiple cisco 1130ag access point at one of my clients villa. The issue I am facing is when moving throughout the buildingthe laptop and smartphones will not switch between AP’s unless it loses its connection with its existing AP then it will see the other AP that is closer and connect to it.
For example, I start at one end of the building where it connects to AP#1 , if I then slowly go to another section of the villa, it it will not switch over to AP#2 until the signal is lost from AP1
I have following settings
AP's are Cisco 1130AG
Single SSID with WEP Security
View 9 Replies
View Related
Feb 17, 2013
i have installed ISE1.1 on VM and other hand vWLC7.4 also there in VM i am using 1130AG APs in flexconnect mode and using central auth and central switch.i wan to configure it for CWA(central web Auth) from ISE but a little a bit confuse about ACLs.
View 2 Replies
View Related
Oct 13, 2010
I am trying to find a way to login to our wirless access point. I have a Aironet 1130AG series wireless router. I have the ip address. It is a POE device so i dont have a power supply for this device. When it is on I can see the Wireless Network but the passcode has been lost and no one knows it. Is there a default IP address for this equipment? There is an Ethernet port for a console but without the power supply i cannot access it.
View 3 Replies
View Related
Jul 27, 2012
One of my Wi-Fi site, having cisco_1130AG access points nearly 110nos as of now i installed 80nos, after installing, in out off 80nos nearly 12nos of APs's radio is showing down.
Again i reset and re-configure then it is working fine, is there any readio (802.11g/a) problem in this model?
View 5 Replies
View Related
Aug 16, 2012
I have 1 EuroDocsis modem and 2x 1130AG wireless things.How do I manage to get this connected to each other wirelessly?The internet is allready configured at the EuroDocsis modem and I now want to distribute it wirelessly to both 1130AG's. The EuroDocsis is using WPA2 PSK.I read something about WDS, but I don't get that to work either.
View 1 Replies
View Related
Jul 19, 2012
I have a Problem with a customer WLAN. The customer has a Aeronet 1130AG AP. Now i should configure a Aironet 1130 Repater for this WLAN. The initial connection from the Repater with the AP is no Problem. But after some time the Repeater lost the connection. On the AP i see following Messages:20Jul 19 19:05:28.061InformationInterface Dot11Radio0, Deauthenticating Station xxx Reason: Previous authentication no longer valid 21Jul 19 19:05:28.061WarningPacket to client xxx reached max retries, removing the client 22Jul 19 16:43:59.412InformationInterface Dot11Radio0, Station yyy Associated to Parent xxx23Jul 19 16:43:57.901InformationInterface Dot11Radio0, Deauthenticating Station yyy 24Jul 19 16:43:56.536InformationInterface Dot11Radio0, Station yyy Associated to Parent xxx 25Jul 19 16:43:51.555InformationInterface Dot11Radio0, Station zzz Associated KEY_MGMT[WPA PSK] 26Jul 19 16:43:29.078InformationInterface Dot11Radio0, Station Repeater01 xxx Associated KEY_MGMT[WPA PSK]
View 2 Replies
View Related
Nov 4, 2012
In our Environment we used to Connect to wifi using Radius Authentication Through AD Account (Encryption: TKIP and CIpher, Authentication Open+EAP and Network EAP, Key management WPA) this settings which will be done And pushed through AD Itself.We Use CIsco 1130AG, 1200 Series in most of the areas which have no Issues.But We Have Some trouble with Cisco WAP4410N Access point.In This Access point users were not able to Connect to wifi through Radius Authentication.However users were able to Connect to these Access point, but it is unsecured, whoever configure's the correct client settings in their PC. They can connect to SSID. This Access point is capable of supporting Radius Authentication?
View 4 Replies
View Related
Mar 23, 2011
We have a guest wireless network using 1130AG Access Points. Is it possible to allow devices on this network access to an Internal IP? I know that kind of defeats the purpose on the guest network, but we'd like to give access to internal email to these devices. Currently this does not work because you cannot loop back into the network to gain access (out the firewall and right back in the same port).
View 5 Replies
View Related
Feb 16, 2013
what are the series of access point that are supported without WLC. anteena should be in built and capability link 1130ag series.
View 9 Replies
View Related
May 16, 2013
I've recently upgraded the configuration on one of our 1130 series standalone access points. I've implemented RADIUS authentication, WPA2 encryption etc. in an effort to make our network more secure. While this part seems to be working as planned, our data transfer speeds have taken a major hit. On our test AP, with only one laptop connected, the laptop will report a connection at 54 Mbits. When using any speed test service the speed reported is approximately 15 Mbits. We have 100 Mbit internet, and desktops connected to ethernet show much higher speeds. When transferring files via our own LAN, data transfer rates average approximately 2 Mbytes/second. I've tested this on 3 separate laptops, some relatively new, and it seems they all get the same speeds.
Long story short, our wireless seems to be operating under a third of its reported speed.
View 2 Replies
View Related
Jan 20, 2010
The 1130ag was the LAP model but I upgraded it to run in autonomous mode. My understanding is that it cannot assign IP addresses but I just want that confirmed. It is not connected to a WLC nor a server that can do DHCP.
View 5 Replies
View Related
Mar 17, 2012
How can I enter into "interface configuration" on Aironet 1130AG, AIR-LAP1042N?When I put following commands in enable conf tinterface Dot11Radio1 but, it fails and I cannot enter into "interface configuration".How can I do this ?The reason why I enter into conf tinterface Dot11Radio1 because I want to disable cdp via CLI ( serial console).
View 9 Replies
View Related
