Belkin Routers :: F5D8231-4 Will Not Link To Samsung Note 10.1 3G
Jan 24, 2013
I have an N1 Wireless Router (F5D8231-4 ver 2). It is setup with WPA/WPA2-PSK on and links to a Windows Laptop and an iPod Touch perfectly. I cannot get my new Samsung Note 10.1 (GT-N8000) connected. I have tried changing the router to WEP 128bit and even no security. The Samsung links perfectly to my neighbours Thomson Wireless Modem/router with no security. The Belkin N1 is recognising the android trying to link and assigns an IP. The Samsung instantly sees the Belkin network ( says " very strong signal") & tries to connect. It saves the network but gets stuck trying to obtain an IP address & reports "network disabled" and "weak signal".
I have a Belkin N Wireless Router Model F5D8236-4 V2. WEP security.. We have just bought a Samsung Note 10.1 Tablet. We have entered the password Key and the tablet is saying that the network is 'secured,saved' but it will not connect to the internet. We have several laptops and phones that work ok but the Samsung Note will not connect.. We have taken the Note to a friends house and it connects to the internet no problem so I know issue is with the router..
The note 2 can connect with the router if I have the router set to open but when I change the security to anything else it keeps re-authenticating and will not connect.
Have only been using the wired before and it works great but now need to connect note 2 to do backups. I have even tried resetting the router back to factory settings and turning on WiFi again and no luck.
Lately I notice my router is very very slow. most of the time I cannot use my ipad or it takes too long and sometimes never finishes downloading a web site. I called Belkin support, and I was told that I need to update and configure, and to do that I have to pay more than what my router cost.
I recently replaced my old Belkin Pre-N router with a newer N router. Still, the newer one is only less older than my Pre-N Belkin router that I had sitting around but never opened and installed (F5D8231-4). Anyway, I finally decided to set it up. I was trying to log into the router to set security settings and to update the firmware but when I type the IP address into the address bar in IE or Firefox, it is partially blank. There are no functional buttons. Only the Belkin logo on a gray background with a couple of emtpy boxes where it looks like functional buttons or tabs should be. how to get to a working screen with functional buttons?
My F5D8231-4 (N1 Wireless Router) keeps shutting down its wireless broadcast. If I reset back to factory settings it comes back on but then I have to setup again.
I have a number of devices in my house connecting without issues:
1.) PS3 2.) XBox 360 3.) HP CM1415FNW 4.) Sony Dash 5.) iPone 4g/4gs 6.) Asus EP121 7.) Six Laptops 8.) TV 9.) Denon A/V
My android cant even pickup the SSIDs, I stand beside and still nothing, the SSIDs are not hidden, Ive tried different encryptions, changed from AES to TKIP, tried different channels. I have two seperate SSIDs, one 2.4GHz with B/G/N and a 5.0 with A/N Available, neither SSID is getting picked up
Just bought a samsung galaxy s4 and I haven't been able to get my WiFi to work with my Belkin router (Surf N300 wireless router, model F7D6301). I tried giving it a static IP and got it to connect to the network, but it still wasn't able to leverage the WiFi for use.The router firmware is up to date.
I have a Netgear ADSL2 router connected to my main computer and want to add a new Belkin AC900db via plug link at the other end of my house so that we have wireless coverage throughout the whole house. It was working at first but the belkin needed an update which I did now It won't work at all?
N600 DB on OSX. I keep on reading the material that there is a link on the dashboard that I click on to set up the router manually. Nowhere on the dash board is that link. Where is that link?
I cannot connect my DIR-655 to the Samsung HDTV with apps so I can watch streaming video with Netflix. The router is 60 feet away from the tv but the DIR 655 is advertised as being for a large home. What can I do to extend the signal or better it? I have even tried using my DLink DWL-G710 but have no better results.
I have a Samsung BD-C5500 Blu Ray player and am using the Samsung PC Share Manager software. For some reason, the software is not recognizing the player. However, the player is able to connect to the internet (I stream Netflix). I am running Windows XP service pack 3 and both my BD player and PC are connected to the same router (D-Link 601). IP address for BD player is 192.168.0.102 and PC is 192.168.0.100. BD player firmware is up to date.
i need to add a lot of mac addresses in mac addr filter table. many routers do not allow me to add a note for each mac address. that makes management a bit difficult.
eg.
field 1, field 2, enable xx:xx:xx:xx:xx:xx , peter pc, y xx:xx:xx:xx:xx:xx, mary pc, n
I just got a Samsung Galaxy S4. As I have always done with all of my devices that connect wirelessly, I went into the D-Link software and added my phone's MAC address to the network filter list. The security settings are WPA/WPA2. When I try to connect, the phone is able to see my Wi-Fi network, and it asks for my password, which I enter. It keeps trying to connect, but then it says an "authentication error occurred." I have checked and triple-checked the password, and it is correct. I have also checked and triple-checked the MAC address, and it is correct. I have rebooted the router and the phone several times each.
I just set up my 655 and it hooked up to the internet right away. I also connected my x box and wi-fy iphone without a hitch. THen I tried to connect my blue ray player that has a wireless feature. My last dlink router recognized the blue ray without a problem. With the 655, the blue ray can see my router and network, but can't connect, saying their is a dchp issue or I need to fix the IP address. Dlink support told me to upgrade firmware but my version is 2.0, and the only thing I can find is a V1.34.
Samsung TV (ue40d5520) connected wirelessly to a D-link dir-615, (Virgin Media)? Sometimes connects and works just fine, hours later it wont even find the router, then in might connect to router but not internet, sometimes says cannot connect due to network inteference... Got a decent signal strength, changed router to channel 11 to stop some interference with others in the neighborhood.My laptop and phone connect to the router fine every time.
My brother got a samsung galaxy s captivate yesterday to replace his pos iphone 3g on Rogers Wireless. He wants to connect to the Dlink DIR-615's wifi to cut down on the data usage while at home on his 500mb per month data plan the ssid and the password are fine, but it hangs on the message "obtaining IP address..." which then after a while refuses to continue to connect and labels the connection "disabled"... the connection type is WPA2 AES something or other so as to guarantee wireless N connections for the xbox and my pc (the ps3 doesn't really do everything, it only does G not N lol)...
I am not familiar with the phone as it's not mine (someday maybe...) so maybe there is a setting i missed. I do know the router is not mac address restricted (meaning only certain computers are allowed to connect).
I got no code, and as a matter of fact have no Internet connectivity to my Bluray player. When I go to my Bluray setting tab and run a network test the MAC Address checks out but fails when it gets to IP Address. My Bluray is plugged directly into my router and it still shows no Internet connection between the two, even though my x-box 360 has no problem nor does my computer. When looking at my network settings the IP Addresss boxes all have numbers in them, the Subnet Mask boxes two of four boxes have numbers the others are zeros, the Gateway boxes are all zeros, and the DNS Server boxes are all zeros. I read many of the posts in this forum and all problems seem pretty similar to mine.
I have a Samsung Galaxy 10.1 tablet and have bee trying to connect to my WRVS4400N router with VPN through the "on board" software as well as with the Any Connect software from Cisco. I have no issues at the moment using Quick VPN from my laptop.
When using the Any Connect software I receive the following messages:
Security warning: untrusted certificate AnyConnect cannot verify the identity of <IP address>. Would you like to continue anyway? - Certificate does not match the server name. - Certificate is from an untrusted source. - Certificate is not identified for this purpose [Accept] [Details] [Cancel]
If I select accept, the following error is received:
"Error: Connection attempt has failed due to server communication errors. Please retry the connection".
I have tried setting up the on board VPN with the Samsug Galaxy but every attempt has resulted in a time-out of the connection.
I have two samsung TV's: UE32B7070 and UE40D8005 and a Thecus N2200 NAS. The tv's cannot seem to connect to the NAS. When i use the tv's check for units connected to the tv, it states that no unit is connected. I suspect that my DIR655 somehow blocks for units seeing each other.
Region : Germany Model : TL-WDR4300 Hardware Version : V1 Firmware Version : latest ISP : Kabel BW Germany
I have HDD (Toshiba 500GB) connected to router by USB and started media sharing. (The HDD is started on USB Sharing) Samsung LED UE40D7090 (2011 model) is successfully connected to network,. I can see TP-Link on my LED network but it appears with blue exclamation mark and if i try to access the released folders with files (i can see the files) with TV shows me a message "unknown file formatt" and i can�t access it. On the PC - I can access video, pictures and mp3 content on USB HDD, problem just with TV. If i connect the HDD direct to TV , TV can play all files.
Region : Argentina Model : TL-WR740N Hardware Version : V1 Firmware Version : ISP :
Region : UnitedKingdom Model : TL-WR740N Hardware Version : V1 Firmware Version : ISP :
Am trying to use a TP-Link TL-WR702N to connect my Samsung SmartTV to a wireless network, using "client mode".For some reason, the TV refuses to accept it is connected, or even connected to a router. Enabling DHCP on the TP-Link does seem to convince the TV that it is connected to a router, but still not to the internet. Strangely though, I can control the TV via the Android app operating on the local network, so clearly it is connected. I assume the SmartTV is trying to get a response on the local network that the TP-Link is filtering out for some reason, but no idea why.
If your wireless indicator is flashing red when you discover the smurf, it can mean that someone has tried to logon with an incorrect password. this is not necessarily an attack, it could be someone you have allowed access too, who has forgotten the password? In this case entering the correct password will solve the problem.However putting your own MAC address into the filter will simply block your own machine.
I have the N600DB Wireless Router I am connected to the internet, but cannot open My Routers Homepage with http://router or http://192.168.2.1. How can I get to this page to reset the router settings? I also cannot connect any of my wireless devices to the network..
I have two matching N300 Belkin routers. The cable modem feeds into modem1 and modem1 feeds into modem2. I get a good wireless connection on modem1. Modem2 shows up on a wireless scan and it accepts the password. It however will not connect.
