I have two samsung TV's: UE32B7070 and UE40D8005 and a Thecus N2200 NAS. The tv's cannot seem to connect to the NAS. When i use the tv's check for units connected to the tv, it states that no unit is connected. I suspect that my DIR655 somehow blocks for units seeing each other.
View 1 RepliesI have a Samsung BD-C5500 Blu Ray player and am using the Samsung PC Share Manager software. For some reason, the software is not recognizing the player. However, the player is able to connect to the internet (I stream Netflix). I am running Windows XP service pack 3 and both my BD player and PC are connected to the same router (D-Link 601). IP address for BD player is 192.168.0.102 and PC is 192.168.0.100. BD player firmware is up to date.
View 1 Replies View RelatedMy brother got a samsung galaxy s captivate yesterday to replace his pos iphone 3g on Rogers Wireless. He wants to connect to the Dlink DIR-615's wifi to cut down on the data usage while at home on his 500mb per month data plan the ssid and the password are fine, but it hangs on the message "obtaining IP address..." which then after a while refuses to continue to connect and labels the connection "disabled"... the connection type is WPA2 AES something or other so as to guarantee wireless N connections for the xbox and my pc (the ps3 doesn't really do everything, it only does G not N lol)...
I am not familiar with the phone as it's not mine (someday maybe...) so maybe there is a setting i missed. I do know the router is not mac address restricted (meaning only certain computers are allowed to connect).
i just ran a NMAP scan on the outside interface of a ASA 5520. It seems that the TCP Ports 7070 and 554 are open on all NAT interfaces and the outside interface of the firewall. I tried telnet on port 554 and 7070 and got connected.
View 10 Replies View RelatedI cannot connect my DIR-655 to the Samsung HDTV with apps so I can watch streaming video with Netflix. The router is 60 feet away from the tv but the DIR 655 is advertised as being for a large home. What can I do to extend the signal or better it? I have even tried using my DLink DWL-G710 but have no better results.
View 1 Replies View RelatedThe note 2 can connect with the router if I have the router set to open but when I change the security to anything else it keeps re-authenticating and will not connect.
Have only been using the wired before and it works great but now need to connect note 2 to do backups. I have even tried resetting the router back to factory settings and turning on WiFi again and no luck.
I have problem connecting Samsung (series6) TV to DIR-600. TV wired connection does not work with DLINK DIR-600 150. Is there a work around ?
Config :
DIR 600 is working in access point mode
Check list : Cat-6 Patch Cord - works (brand new works fine with laptop)TV network port - works (works fine with aztech ADSL/Switch)
I just got a Samsung Galaxy S4. As I have always done with all of my devices that connect wirelessly, I went into the D-Link software and added my phone's MAC address to the network filter list. The security settings are WPA/WPA2. When I try to connect, the phone is able to see my Wi-Fi network, and it asks for my password, which I enter. It keeps trying to connect, but then it says an "authentication error occurred." I have checked and triple-checked the password, and it is correct. I have also checked and triple-checked the MAC address, and it is correct. I have rebooted the router and the phone several times each.
View 1 Replies View RelatedI just set up my 655 and it hooked up to the internet right away. I also connected my x box and wi-fy iphone without a hitch. THen I tried to connect my blue ray player that has a wireless feature. My last dlink router recognized the blue ray without a problem. With the 655, the blue ray can see my router and network, but can't connect, saying their is a dchp issue or I need to fix the IP address. Dlink support told me to upgrade firmware but my version is 2.0, and the only thing I can find is a V1.34.
View 7 Replies View RelatedSamsung TV (ue40d5520) connected wirelessly to a D-link dir-615, (Virgin Media)? Sometimes connects and works just fine, hours later it wont even find the router, then in might connect to router but not internet, sometimes says cannot connect due to network inteference... Got a decent signal strength, changed router to channel 11 to stop some interference with others in the neighborhood.My laptop and phone connect to the router fine every time.
View 4 Replies View RelatedI have an N1 Wireless Router (F5D8231-4 ver 2). It is setup with WPA/WPA2-PSK on and links to a Windows Laptop and an iPod Touch perfectly. I cannot get my new Samsung Note 10.1 (GT-N8000) connected. I have tried changing the router to WEP 128bit and even no security. The Samsung links perfectly to my neighbours Thomson Wireless Modem/router with no security. The Belkin N1 is recognising the android trying to link and assigns an IP. The Samsung instantly sees the Belkin network ( says " very strong signal") & tries to connect. It saves the network but gets stuck trying to obtain an IP address & reports "network disabled" and "weak signal".
View 1 Replies View RelatedHow to connect net to pc on samsung Monte
View 1 Replies View RelatedMy Samsung UN46C7000 will not connect to my wireless internet. It was connected in the past, but when I go through the test, it fails at "IP address, Subnet, Gateway, DNS Server Test Failed" I have done the typical reomve power from router/wireless combo, wait 30 seconds, plug back in.My other wireless devices connect to my wireless network with no issues. I even disconnected one and reconnected just to verify I had my security code correct.I saw something from Samsung that says DHCP needs to be enabled, but I believe this is disabled on my router and not sure how to change it.
View 1 Replies View RelatedI have an Apple time capsule and Samsung Smart TV. I set up the wireless connection, checked the status on the TV, connected. When I try to open something in the Smart TV, it says I'm not connected.
View 1 Replies View Relatedafter i enter the security key for my router it says it is unable to connect to the network. it also has me manually put in my ip address and it says my gateway ping is incorrect. where do i find this information
View 1 Replies View RelatedHow to connect pc to samsung mobile wifi and its setup and configuration.
View 2 Replies View Relatedant i use internet of my pc in my galaxy y
View 1 Replies View RelatedI have a Samsung galaxy tab 10.1 and I cant connect to my wifi network. Months ago I was able to connect to it but since I changed the router settings I cant, and now it just says it's out of range. My laptop is still able to connect but the tablet doesn't.
View 2 Replies View Relatedhow to connect the wfi with mobile to lap...
View 1 Replies View RelatedI am unable to connect my samsung blu ray dvd BD-P3600 via the wireless connector. I have tried all 3 secure modes with the wep key to my wireless G router, none work. I have tried to manually enter the IP, DNS, etc information manually also to no avail. I have followed all the directionsfor the settings, just unable to connect.
View 3 Replies View Relatedim trying to get netflix but i cant get my blueray player to connect to the internet,everything is hooked up and turned
View 1 Replies View Relatedjust got a samsung galaxy s2 great phone but cannot connect to home network via netgear router, i can see the network but if wont connect. i can connect the my work one no problem via wep key.i have tryed every thing do still no go
View 13 Replies View RelatedHow do I connect Samsung mobile phone F-480i to my pc (which has Samsung New PC Studio) by bluetooth? to how this can be done. I've struggled for a long time without success.
View 1 Replies View RelatedMy friend just started his business. There are 5 people working here including both of us. He bought a Samsung 2165W. He wants all of us to use this printer. What do we have to do? None of the PC's are on a domain. The printer has no ethernet jack. Do we just have to buy a router? Can we print via the ip address of the printer. We are using Vista. We installed the CD. We tried to install via USB. They wanted some numbers. We tried via WPS but we couldn't since there is no router.
View 7 Replies View RelatedHOW I CAN USE MY SAMSUNG S5620 MONTE TO ACCESSES INTERNET IN PC USING SAMSUNG KIES
View 1 Replies View RelatedI am trying to connect my Samsung TV to the internet and keep getting a message that says NEtwork setup complete, but cannot connect to the internet. I am wondering, I have 2 network connections, a secure one and unsecure. I don't have the information/password for the secure connection anymore, so I am trying to set my TV up with the unsecure network.
View 1 Replies View RelatedI Want To Connect My Android Phone To My PC For Internet.
View 1 Replies View RelatedI purchased an Samsung UE46ES6300 Smart TV for my Boyfried for Christmas & we are struggling to connect it to our WiFi to use the features. Obviously I went through the procedures - Network settings, found my WiFi, typed in my Network password & unfortunately states: 'Unable to connect to the Wireless Router'. Taking into account my Virgin Media Router is directly next to my TV? The Wireless & Internet is 100% working as we have other devices running of it - I-pad, Laptop, Phones etc!
View 9 Replies View RelatedHave a Samsung tablet supported by Verizon wireless. I need to connect to my home HP printer, but do not have broadband in the home, Can I connect the printer to a router and access via my tablet?
View 1 Replies View Relateda new samsung galaxy y phone and am unable to open websites using my wifi network my modem is mtnl 450tc1. my phone shows that its using 192.168.1.2. no changes can be made to dis option My phone shows that it has been conected to the wifi but it does not loads the websites
View 1 Replies View RelatedConnect to internet on my mobile samsung galaxy y GT s5360
View 1 Replies View RelatedMy phone won't connect to my Belkin router (F5D7230-4) thru the wifi connection. It previously had connected fine, but I'd reset the router today & changed the password. I'm able to connect with no problems (thru wifi or regular connection) on my pc. I went to my Belkin router page and have looked at my MAC settings (only option it gives is to clone, which I tried), I've also tried changing the password....my phone also gave me the option of hitting the WPS button on my router within 2 minutes, which I did, but it would not configure automatically as it was supposed to.
View 1 Replies View RelatedI am unable to connect to my home network over VPN from my Samsung Galaxy S3 phone. I have a Netgear WGR614v01 wireless router. This router has my desktop computer and windows 2012 server plugged into it. The server is a domain controller that has the following roles installed: DHCP, DNS, ADDS, IIS, and Remote Access. My Windows 7 Professional desktop is joined to the domain controller. The wireless router serves my netbook, smartphones, and ipods. They do not authenticate with the DC but do get a DHCP ip address from the server.I have my Samsung Galaxy S3 phone that I'd like to be able to use to VPN into my network. Here is what I have done;Disabled the DHCP service on the router. Setup port forwarding to forward PPTP to my server's static IP address on port 1723.I created a user on my DC for this purpose and enabled the account for network dialup service.I created a DHCP Relay Agent in the Remote Access MMC.I opened up the Remote Access app on the server's firewall.On my phone I setup a 'New VPN Connection...' I use the username/password of the user I created for this purpose. I put in my ip address that I have from my ISP.
View 2 Replies View Related