Cisco Firewall :: ASA 5505 / Error / NAT Policy Is Not Downloaded
Apr 1, 2012
I Have a Firewall ASA 5505 with asa 8.4(2) asdm 6.4(5) I have only one Public IP services and need to publish on the Internet
External User (Internet) -> Calls connection on port 22 Internal server 192.168.1.124
External User (Internet) -> Calls connection on port 80 of the Internal 192.168.1.124 server or other server the same inside.
In the first moment I'm just testing the access port 22.I had it working in version 8.2 but after I updated to 8.4 does not work, I've tested several different configurations.
Configuration (see asa5505_config.txt file)
object network remoto_ssh
host 189.120.190.229
object network linux_ssh
host 192.168.1.124
nat (inside,outside) static remoto_ssh
access-list outside_access_in line 1 extended permit tcp any object linux_ssh eq ssh
ERROR: Address 189.120.190.229 overlaps with outside interface address.
ERROR: NAT Policy is not downloaded
View 12 Replies
ADVERTISEMENT
Mar 5, 2013
I am trying to add 89,462+ access list rules to an ASA 5510 running 8.2(5). I have added all the rules to an object group and when I try to apply the access list to an interface it gives me the following error:
ERROR: Cannot add policy to rule engine ERROR: Unable to assign access-list wan-out to interface wan
I have not tried not using an object group and just putting the rules in the access list. I want to be able to add to these rules if needed easily.
I think it's clear that i have exceeded the rule limit for the ASA. So my question is, what is the rule limit for an ASA 5510 and which ASA could I purchase that would handle this amount of rules?
View 1 Replies
View Related
Apr 16, 2013
I have configured the primary firewall every thing seem to be fine, And we have configured fail over device while config is getting replicated to the fail over device we are getting below error.
ERROR: Cannot add policy to rule engine
ERROR: Unable to assign access-list LAN_out to interface inside
IOS and Model are same.But all the config got replicated from primary to secondary but except the one access group command.
access-group LAN_out in interface inside.
View 7 Replies
View Related
May 18, 2011
This might actually go into Networking Basics because of the nature of the problem, but I tossed it in here because of the Cisco product involved. Long story short, I need to do some detective work to figure an apporpriate IP address for a NIC.I recently started working at a company with the ASA 5505 and I need to upgrade the software image on a bunch of them. There's already a computer set up with a TFTP server and Hyper-Terminal to do it. I'm trying to use the CLI update procedur[URL] but when I get to the beginning of the actual transfer from the TFTP, I get stuck at "Accessing" and then the connection times out with the message "Unknown Error".The only thing I can think of is that somehow the ASA is not making it all the way to the TFTP server, probably because the IP address settings on the NIC for the computer is set wrong. I say this because in the config file provided me, the ASA is given an address X.Y.Z.1, subnet mask /24 (where all the letters are constants) and the TFTP server has an addess in its software config of X.Y.Z.10 mask /24, but the NIC on the computer is set to A.B.C.105, which is an entirely different network.I need to figure out what I can make the NIC IP address so I stop getting the error. I tried a couple of different X.Y.Z.x addresses, but haven't gotten anything yet.
View 1 Replies
View Related
Jul 6, 2011
I have configure L2TP vpn using ASDM and now i am not able to connect my Cisco ASA 5505. it's showing error message 3Jul 07 201118:57:38IP = *.*.*.*, Error processing payload: Payload ID: 1
View 1 Replies
View Related
Jan 16, 2011
I am get stuck on this issue, i have asa 5505 which was working more than 4 months, after power recycle the firewall is not booting now, it gives the below error. i have tried to upload the new image however the story is same.
i2c_write_byte_w_suspend() error, slot = 0x0, device = 0x40, address = 26 byte count = 1. Reason: I2C_UNPOPULATED_ERROR.
View 2 Replies
View Related
Apr 7, 2011
I use a CISCO ASA 5505 with ASA 8.3. Everything works fine, but when I type the following line I get an error message:
nat (inside,outside) source dynamic OBJ_SPECIFIC_192-168-1-0 10.1.5.5ERROR: 10.1.5.5 doesn't match an existing object or object-groupI even tried to create the missing object but it did not work. The document also explains how to use ASDM for this configuration. It seems that there an object 10.1.5.5. is created.
This is the output of "show running-config":
ASA Version 8.3(1) !hostname ciscoasaenable password 8Ry2YjIyt7RRXU24 encryptedpasswd 2KFQnbNIdI.2KYOU encryptednames!interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 !interface Vlan2 nameif outside security-level 0 ip address 10.1.5.1 255.255.255.0 !interface Ethernet0/0 switchport access vlan 2!interface Ethernet0/1!interface Ethernet0/2! interface Ethernet0/3!interface Ethernet0/4!interface Ethernet0/5!interface Ethernet0/6!interface Ethernet0/7!ftp mode passiveobject network obj_any subnet 0.0.0.0 0.0.0.0object network
[code]....
View 1 Replies
View Related
Apr 15, 2012
Whenever I use the following command I get an invalid input error
ciscoasa#conf t
ciscoasa (config) # crypto isakmp enable outside
ciscoasa (config) #object network net-local
ciscoasa (config-network) # subnet 192.168.101.0 255.255.255.0
^
I have reset the firewall (cisco 5505) to factory default. The marker ^ is under the subnet
View 10 Replies
View Related
Apr 4, 2010
: Saved
:
ASA Version 7.2(4)
!
hostname ciscoasa
domain-name default.domain.invalid
enable password EhxQ5dBfvkyaUj52 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 192.168.10.8 W2K3-X32-SP
[code]....
I have a problem with a dmz vlan. I can´t surf over internet on a remote host.The dmz vlan links with remote network on host 192.168.20.3 .
INSIDE (192.168.10.0) -------------- Outside (88.88.88.0) -------------- DMZ (192.168.20.0)
^
|---------- Remote network (192.168.9.0)
View 8 Replies
View Related
Jul 7, 2011
I have connected an ASA 5505 to an ADSL router that is able to assign the IP address and the also the DNS servers for the ISP for the outside interface. The ASA is loaded up with IOS "asa842-k8.bin"
I am using vpnclient with a hostname as oppose to an IP address to connect to a headend remote server. If I hardcode the DNS servers IPs in the "dns server-group DefaultDNS" I am able to resolve the hostname. If I then remove the IPs from the group and rely on the dhcp to assign them, when I try to resolve the name I have an error at the console "ERROR: % Invalid Hostname"
View 2 Replies
View Related
Nov 3, 2011
My firmware is 1.35NA and have a schedule established. When I try to add a policy for access control, I can select a policy name but when I hit "next", I get an error stating "Internet Explorer has stopped working" and wants to close. I was able to add policies previously but can not any more.
View 3 Replies
View Related
Dec 12, 2012
I was trying to configure copp on one of 6500 sup-2T. Is it ok to add customized policies to the default copp "policy-default-autocopp".When I created my own customized policy using policy-map, I get following error
control-plane service-policy input policy-custom
error: failed to install policy map policy-custom
View 7 Replies
View Related
Jul 26, 2011
I upgraded my Cisco asa from 7.2 to 8.4 system image. Now the old style syntax isakmp policy is not working anymore and I am not able to write a isakmp policy to being used for remote access VPN.
on many examples on Cisco site I have seen that it is always used Cisco any connect client installed on ASA. this means that the old configuration compatible with Cisco vpn client IPSEC is no more usable ? or what kind of syntax I have to use to configure remote access VPN ? for example these commands are not working anymore.
hostname(config)# isakmp policy 1 authentication pre-share
hostname(config)# isakmp policy 1 encryption 3des
[code]...
View 4 Replies
View Related
May 29, 2011
I have an ASA 5505 at each of three locations. We have VPN tunnels set up between the three sites. I am currently using a single ISP to control the traffic between the sites. I am adding a new ISP to the mix. The goal is to have any internet traffic routed to ISP 2 and all internal traffic routed to ISP 1.The ASA does not do policy based routing (mostly because it is a firewall, not a router). I need to configure a router that will accept the output of the ASA and route it according to the above rule. All incoming routing will be done through ISP 1. Any suggestion on the device and the methodology to set it up? I am planning on doing this in each location.
View 3 Replies
View Related
May 16, 2011
I have two 1811's connected in a lab using a ipsec vpn tunnel (using a switch to simulate an internet connection between them).I am trying to configure one of the routers as a ZBPF just to allow a remote windows login (DC on the firewalled side, workstations on the other side).I'm trying to verify that the zbpf is working, but it doesn't seem to stop anything. I had match icmp added to the class-map, but took it out to test if icmp would fail. It didn't. Basically, I don't think the firewall is working at all. Any thoughts on how I can configure this so that the policies will work between zone-pairs?
Here's an quick drawing:
Here are the configurations:
Local router:
hostname sdc-1811-LocalLab
!
boot-start-marker
boot-end-marker
!
no aaa new-model
!
resource policy
[code]....
View 11 Replies
View Related
May 8, 2013
I have downloaded the new firmware for the SG500. I see there are two files included in the download, a boot file (rfb) and regular firmware image (ros). I have looked and haven't seen anything about the rfb files. I know it is a boot file, but do not know if I should update the boot file first and then the firmware image or vice versa. Also, in my update screen on the SG500, the boot file option is greyed out.
View 1 Replies
View Related
Nov 11, 2012
Let's suppose I'm connected to a network whose admin asked in a friendly way not to download anything but certain things he specified.He never came to my machine or setup any kind of client to it. The question now is, is there any chance he knows what I download???Does he know the name and the extension of the file I download if I use Utorrent and magnet links?
View 2 Replies
View Related
Mar 28, 2013
How can I install cache server for caching downloaded files ?I try use Squid for it.but it's not working properly.Squid can caching downloaded files when download the file without Download Managers.(Like IDM)When I use a Download Manager , Squid can't cache the downloaded file. ( Max connections number in IDM = 16) How can I cache downloaded file , when download file with IDM and multi connection mode (max connections number = 16 or 8 )
View 1 Replies
View Related
Mar 13, 2013
Samsung will be releasing the Galaxy Note 8 sometime in the second quarter of this year.
I have an Amazon Prime Account and would like to know if I can transfer the downloaded movies I purchase on Amazon on the Galaxy Note 8.
I have Windows 8 installed on my computer at home.
View 1 Replies
View Related
Mar 28, 2013
How can I install cache server for caching downloaded files ?
I try use Squid for it.but it's not working properly.Squid can caching downloaded files when download the file without Download Managers.(Like IDM)When I use a Download Manager , Squid can't cache the downloaded file. ( Max connections number in IDM = 16) How can I cache downloaded file , when download file with IDM and multi connection mode (max connections number = 16 or 8)
View 1 Replies
View Related
Feb 3, 2013
I had originally set up my E1200 Jan 2012 & had Cisco Connect setup. I didn't use it much but back in Oct after being away for 10 days I didn't have internet connection. Had to re-set both cable modem--then I at least had connection via ethernet, but still no wifi connection. Had to turn off for awhile to get it Router to properly reset & work. & then I think I had to do another reset maybe in Dec, can't remember exactly.
As I mention in another post, I have been having frequent intermittent not connected to internet messages for a long time. Usually if I just turn wifi off & then turn it back on it finds my network (although frequently I notice that it was on my guest network rather than main). I still don't know if it is cable modem, router or my ISP, altho they came out & checked & said signals ok, but modem could be going (Its old but about to move so don't want to buy new modem now).
I updated to Mountain Lion about 2-3 weeks ago.After a Panic last night I was advised to make sure everything updated including router firmware.When I opened Cisco Connect it said I had an unsupported Operating System. Trying to figure this all out, I finally found links to download Cisco Connect that are supposed to be compatible w Mountain Lion (at least the original link said that, but not where I went w the links so hoping it is right link for that). Anyway I downloaded it & was reading a bit & then clicket on the setup icon.
That said it was damaged & to eject it. I downloaded it via wifi just like I download other software. Maybe it is hyper sensitive so I need to take it over to plug directly into my cable modem? But then that will mess up the router, although I guess it will need to be reset any way.So I think i need to get Cisco Connect updated so it works w Mountain Lion. Mountain Lion told me about 1 software that wasn't compatible but didn't pick up on Cisco Connect.So don't know if I need to do a hard wired download, unlike the way I download other things, or what to get an undamaged copy. I then hope that it will see the old version, even though it isn't didn't work & hopefully pick up all my settings & all.
& then I guess I still need to check for a firmware update. & I understand that a firmware update should be done w a good connection (although the user manual just says good signal, web says hard wired ethernet. & because of the intermittent issues I plan to to it manually by 1st downloading & then installing from the download so there won't be a risk of interruption during install--if its even needed.
View 6 Replies
View Related
Jul 6, 2011
i am doind a policy NAT on the folowing scenarion.
acess-list policy_nat extended permit ip host 10.0.0.1 host 192.168.1.1
static (inside,outempresa) 170.66.53.1 access-list policy_nat
I understand that when host A 10.0.0.1 wants to connect to host B192.168.1.1 its going to be translated to 170.66.53.1 when host 192.168.1.1 wants to connect to10.0.0.1 the same entry will change the destination when the packet hits the asa from 170.66.53.1 to 10.0.0.1, is that correct ?
View 2 Replies
View Related
Feb 27, 2011
How can I configure police-based nat to allow ICMP-only traffic on asaos 8.4.1 or 8.3?On 8.3 it was very simple:global (outside) 1 interface ,access-list outside_nat_outbound extended permit icmp any any,nat (outside) 1 access-list outside_nat_outbound.
View 10 Replies
View Related
Apr 11, 2011
I have devices on Inside interface of ASA that need to get to Internet to get ntp. Hence I want to set up dynamic pat (interface overload) which 8.3 style would be
-object network obj_NTP-DEV
-host 192.168.1.250
-nat (INSIDE,INTERNET) dynamic interface
But I need to limit nat to only Internet destined traffic on ntp port not all ports for traffic from 192.168.1.250.I'm not using this nat set up to control outbound access - I also have incoming RA VPN tunnels to the box and traffic from these sources need to be able to get to 192.168.1.250 and the above simple set up would break that access as all traffic involving 192.168.1.250 would get nat'd
Reading the doco I've sent myself round in a loops trying to figure how you are meant to do such a " Dynamic Policy NAT (overload)" call it what you will config in 8.3
View 2 Replies
View Related
Feb 23, 2013
When i try to update the firmware it tells me the it is an incompatible update.ive followed all the instructions.my model number is f5d8235-4 v2.i have downloaded the correct version for the firmware update (2).
View 5 Replies
View Related
Mar 18, 2013
I´m triing to setup a QoS policy on ASA 5515, i read several pages, but my questions are, how setup the real BW?, or is not necessary to do this?
View 7 Replies
View Related
Apr 12, 2011
how can I configure policy NAT on ASA5510. I would like to do the following;
9.1.1.9 NAT to 10.1.1.9
If source IP = 1.1.1.1
then NAT to = 10.2.2.9
the rest NAT to = 10.1.1.9
The issue is I want 1.1.1.1 NAT to 10.2.2.9 when access www.example.com. The rest NAT to current NAT.
View 4 Replies
View Related
Aug 30, 2011
I can't install or extract any file or archive downloaded through shared connection from the 1st PC via a LAN ... tried new LAN and tried switch the LANs but doesn't work always a CRC error when extract an archive or file corrupted when install anything downloaded:this is what I tried so far
-tried download and extract on a 2nd installed windows (I have dual boot) and its same CRC error
-tried another non built-in LAN card pci-E x1 and its the same CRC error
-tried restore bios to default and its same CRC error
-tried putting a laptop on the same line instead of my PC and it works no errors no problems
View 9 Replies
View Related
Apr 27, 2011
I am using ASA 5505 with firmware 8.2(2). My ISP uses PPPoE as a WAN connection protocol. There is a problem with getting PPPoE session started on my ASA 5505. The debug output says that after negotiation of PPP-authentication protocol ASA receives a PADT packet from ISP’s concentrator. To get more information I captured all packets on outside interface with WireShark. Packet-dumps (in .pcap format) are attached in this post. I have tried all possible combinations of PAP/CHAP/MSCHAP values in “vpdn group MYGROUP ppp authentication” command. If you take a look at the packet-dumps you can see, that in case of “PAP” – ISP’s concentrator rejects negotiation (PAP is not supported by my ISP). In case of CHAP/MSCHAP (that ARE supported by my ISP) – ASA acknowledges the using of MSCHAP v.2 PPP-auth protocol, which is actually not supported by it…
Judging by MAC-addresses of ISP’s concentrators it is visible that Cisco’s equipment also is used.
The questions is: Why ASA acknowledges using of unsupported ppp-auth protocol during negotiation and what I need to do to resolve this issue? (ISP’s support says, that they cannot change PPP-auth protocol negotiation order. Also they says that I need to contact with manufacturer of my equipment).
View 3 Replies
View Related
Sep 20, 2012
How to configure our ASA to nat our to internetconnections, at the moment the first work fine,
ISP1 NAT
ASA5510 LAN
ISP2 NAT
View 1 Replies
View Related
Sep 27, 2012
I recently upgraded the ios image and the asdm on a cisco 5520 firewall. I use a policy on a cisco security manager to push policys out to this firewall. But it cant push to them now because the image has changed on the device.Is their anyway to re - assign the policy without having to do a new discovery.
View 2 Replies
View Related
Jan 10, 2011
On FWSM (running version 4.1 in my case) the default global policy uses the following class map:class-map inspection_default match default-inspection-traffic
What "default-inspection-traffic" includes? Is it all traffic? If so, do I really want all my traffic to go through the inspection engine? I would imagine this would have a performance impact on traffic that is not part of the protocols being inspected.
View 9 Replies
View Related
Nov 30, 2012
I have a server in a network DMZ (IP 192.168.40.43) need to do discovery of other IP address to update the IPAM tool. It should not be done source NAT so I´m trying to use the configuration below with Policy NAT but isn´t working:
nameif ethernet1 inside security100
nameif ethernet5 dmz8 security55
!
ip address inside 10.56.12.93 255.255.252.0
[Code]....
It´s following message appears "% PIX-3-305005: No translation group found for icmp dmz8 srv: 192.168.40.43 dst inside: 10.38.36.50 (type 13, code 0)".
View 10 Replies
View Related
