Cisco Wireless :: Aironet 1040 How To Configure Access Points

May 21, 2012

I have a Cisco aironet 1040.
 
On my Accespoint i have 2 vlans: 1 for my wifi phones and 1 for my network.Wifi Lan has the SSID LAN with WPA enterprise authentication to a radius server(ms server 2008).Wifi Phone has SSID PHONE and vlan 50 with local radius authentication.This Works all fine, Except when i enable AP for my wifi phones. When AP is enabled the authentication for my lan doesn’t go to my server but local.How do I configure my accesspoints so that the cisco phones use the local radius server with AP and my windows computers connect using the ms radius server?

View 16 Replies


ADVERTISEMENT

Cisco :: Configure Aironet 1040 Access Point?

Oct 27, 2011

I am trying to configure Aironet 1040 access point. After systems get connect they immediately get disconnected. The error observed on the device is as below

%DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station 000e.83c8.c88a Reason: Disassociated because sending station is leaving (or has left) BSS
 
and the ssid is not getting broadcasted. kindly let me what could be the cause.
 
[code]....

View 3 Replies View Related

Cisco Wireless :: Aironet 1040 Access Point Managing

May 22, 2012

We are currently using several AP's in our organization. And in this one AP i want to give a user the power to change the password of the wireless network to prevent miss use. I was wondering if it was possible to create an account who only has the privilege to change the WPA key?? I want to prevent that he will accidently change other settings.

View 5 Replies View Related

Cisco Wireless :: Setting Up Aironet 1040 Access Point

Mar 13, 2013

I'm working on setting up an Aironet 1040 Wireless Access Point for my company.  It's my first time setting up something like this, and I've run into a bit of trouble.
 
I created my first SSID easily enough, following the manual and guides online.  I set up VLAN 1 as my native VLAN and linked it to my SSID with the encryption and security that I was told to use and it works great.  However, my boss asked me to set up a second connection as well for guests at the office, and this is where my trouble starts.
 
I created VLAN 2, and then another SSID which I linked here.  I set up encryption and security the same way, and I can see the network when I open up my network and sharing manager.  I can connect to the network as well, but I either get a spinning blue icon where my signal strength indicator is or a few bars with a yellow caution sign, and Windows says 'Identifying...'.  I've compared the two SSIDs using the console and the GUI and I can't seem to spot any obvious differences between them.

View 4 Replies View Related

Home Network :: Set Up Access Point Aironet 1040 Cisco?

Nov 23, 2012

how i can set up access point aironet 1040 cisco?

View 2 Replies View Related

Cisco Switching/Routing :: Access Point Aironet 1040 Configuration - Not Getting 802.11n To Work?

Jun 25, 2012

I can't figure out how to get the config right for the 802.11n channel to work.

View 4 Replies View Related

Cisco WAN :: Wireless Cannot See The 1040 Aironet

Jan 8, 2013

everyone can connect to the 1040 ap except my laptop and another one. for some reason it stopped showing , it was working fine and out of the blue nothing.

View 2 Replies View Related

Cisco Wireless :: Multiple Aironet 1131AG Access Points And Same SSID?

Dec 22, 2009

We have multiple Cisco Aironet 1131AG devices, all wired on one Cisco L2 switch(2560)  who is connected to L3 switch (3550). We assigned one VLAN for access point in L3 switch who acts as vtp server (L2 switch is vtp client). All ap's will have static ip address and all will have same SSID and no security and they will be using multiple channels (ex. 1,6,11).  They will operate in 3 floor building for roaming wireless client. We won't using any wireless controller.

How to configure APs-all the same with different ip's, can we use L3 switch to create dhcp server for access points VLAN (pool for clients, and the rest for static ip for ap's)?

View 2 Replies View Related

Cisco Wireless :: Aironet 1100 Series / IOS Upgrade For Access Points?

Sep 25, 2012

I have some Cisco Aironet 1100-series, 1040 series, 1240 series, 1130 series and 1200series and i would like to upgrade them to the newest ios software.
 
The IOS that are present in my access points are 12.3(8)AJ and 12.3(11)JX.

View 2 Replies View Related

Cisco Wireless :: 2504 Controller With 3 Aironet 1142 Access Points

Mar 16, 2013

I have installed/setup a cisco 2504 wireless controller and 3 aironet 1142 access points using the basic config on a windows sbs 2008 domain, the problem is that the clients that are connected to the 2504 aint getting the there ip addr from the AD but from the wireless controller, and there cant reach the clients on wifi from the clients that are connected to lan, is there anyway that i cant change this so that a client on lan can see the client on wlan and vice versa.

View 5 Replies View Related

Cisco Wireless :: Aironet 1041N Standalone Access Points Setup Information

Jul 19, 2012

I recently bought 6 airo net 1041N standalone access points for a customer of mine. It's an academy of barely 200 students. I'll be installing an access point in every room, to ensure better signal, since they use video for there classes. The reason why i decided to install an access point in every room is because the walls are armed concrete and they had a terrible experience with a past company in which they spend a lot of money for a antenna system that didn't work.These access points will be connected to a switch, which I have to buy also.Every student is going to bring there own laptops in order to connect to the network.

The reason why I'm writing is because I have a few questions to clarify.  
 
1) What is the best position for better signal, top side wall or corner ceiling?
 
2) How many client mac address filtering  can i do per access point?
 
3)I plan on doing ESSID but can I mac filter clients to a particular access point or should I mac address filter all permitted devices in all access points. The problem is that students come with iPods and phones and as you know on windows they will be able to see the wpa2 key and enter it on the particular UN-authorized device.

4) Any graphic user interface for configuring these access points or do i have to use Cisco IOS(kind of familiar with it)? (I'm used to GUI)

5)How can I configure these access points, through Ethernet browser or do I have to use console port cable?

6)Do I have to use POE injector or can I connect the access points directly to the switch with PoE and QoS?

7)I was planning on buying a small business switch sg100 d-8 but they recommended me that I should use the catalyst 2960 series, which would be best for handling video data? don't have to be much features, just QoS.

8) Can CCp software be used in these access points?

View 9 Replies View Related

Cisco Wireless :: Slow Connection With Aironet 1040?

Nov 15, 2012

I have been racking my brain for a while and cannot figure out why I am not getting 144Mbps out of my Aironet 1040. I was reading a previous thread ([URL]) and set it up exactly like it said. I have set the encryption to Cipher AES CCMP and set the SSID to open authentication. I also set the SSID's key management to enable WPA (WPAv2).
 
I was reading that WMM has to be set. I have 3 options: Disabled, Legacy, and dot11d. If i chose dot11d I have to put in a coutry code. Problem is there are no options in the country code pull down. I cannot even manually type it in.
 
Another problem is that cell phones cannot connect. It keeps saying authentication fails in the log.

View 9 Replies View Related

Cisco Wireless :: Configuring Aironet 1040 With WPA2-PSK?

May 24, 2012

I am attempting to configure two Aironet 1040 series wireless access points for the first time and am having some difficulty. This office does not have a RADIUS server so I would like to set them up to use WPA2 with a pre-shared key. However just how this is accomplished is not immediately apparent. I have attempted using both the command line interface and the web interface, but I get errors in both places. It doesn't seem like it is all that difficult, we're just talking about a few lines in the configuration file.
 
This is what I have so far:
 
Current configuration : 1684 bytes
!
version 12.4
no service pad

[Code].....

View 1 Replies View Related

Cisco Wireless :: How Many Clients Can Be Connected To Aironet 1040 AP

Jan 1, 2013

i have ~ 25 employees which are connected to the AP . I have a 2mb dl and 2mb ul microwave lease line.The AP disconnects ever couple of hours for a minute?

View 3 Replies View Related

Cisco Wireless :: Aironet 1040 IP And Splash Page Redirecting

Mar 11, 2013

I am trying to create a welcome screen for people who join the guest network on my aironet 1040.Webpage pass-through is really what I want but I know that doesn't work on a 1040.What does: IP redirect, Conditional Web redirect or Splashpage redirect?

View 1 Replies View Related

Cisco Wireless :: Aironet 1040 Dual Band Disconnects Mac OS X

Dec 26, 2012

we have several AP1040 in the office, but the latter is a Dual Band 2.4 GHz and 5 GHz. And we have problems with all workstations MAC OS X gets a lot of disconnections during the day, the strangest thing is that the OS X community is aware of the problem, and their only recommendation is to buy the external Aironport has better hardware.

View 3 Replies View Related

Cisco Switches :: SG300-28P And Aironet Access Points

May 14, 2013

Does Cisco SG300-28P provide enough PoE to power access points 1550 and 1600?

View 1 Replies View Related

Cisco :: Aironet 1040 And Radius Auth Failure?

Sep 24, 2011

I have setup a Cisco Aironet 1040 to connect to our Radius server which I have also configured.
 
I can successfully connect up any Iphone or Ipad but I cannot get any laptop to connect.
 
I have attached the logs showing the Iphone Successfully logging in and the Laptop Failing. Every single failure in the Event log for NPS comes up with
 
Network Policy Server denied access to a user. Contact the Network Policy Server administrator for more information.
 
User:
Security ID:            NULL SID
Account Name:            scottd
Account Domain:            AMSLAN

[Code].....

View 12 Replies View Related

Cisco Wireless :: Configure GIG 0 Interface On 1552E Access Points To 10 Meg Full Duplex

May 19, 2013

Is there a way to configure the GIG 0 interface on the 1552E Access Points to 10 Meg Full Duplex? Currently they will only work in Auto/Auto

View 3 Replies View Related

Cisco :: Samsung Android Phones Cannot Connect To Aironet 1040 Network

Dec 26, 2012

Every device I've tried to connect to my WiFi network have no issues connecting at all, except for, as far as I can tell, Samsung Android phones. My sample set is very small, but both a Samsung Galaxy S3 (both before and after custom ROM install) and a stock Samsung Galaxy Nexus.
 
I've tried setting a vlan up with no encryption and open authentication, and the phones just halt on "connecting". This issue is both on the 2.4Ghz and 5Ghz Radios.
 
What is working is various computers with both intel and broadcom adapters, a Brother printer, and a Motorola Droid 3 and Motorola Photon Q. I'm starting to think that it's an issue with the radio in the Samsung phones, but the S3 is 5ghz compatible and the Nexus is only 2.4, so they must have different radios. I'm also pretty sure that it's not software on the phones since the S3 had the same problem with stock ROM and CM 10, and the Nexus is Vanilla Google ROM.
 
I'm waiting to get a chance to upgrade to the new FW for my aironet 1040, and I'm going to fire up an old 1130AG as well as test with an iphone or ipod when I get the chance; I'd just really like to find out what the heck is going on with these samsung phones.
 
Current configuration : 13969 bytes
!
! Last configuration change at 10:18:26 MST Sun Dec 23 2012
! NVRAM config last updated at 10:18:26 MST Sun Dec 23 2012

[Code].....

View 15 Replies View Related

Cisco Wireless :: Aironet 1310 Bridge - Cannot Access GUI To Configure

Nov 21, 2011

I have a pair of Aironet 1310's I am needing to bridge. I have used the CLI to configure the BVI1 with the ip address and verified it. I then tried to access the GUI to configure the device via Internet Explorer and it would not provide access. I read that it had to be older versions of IE but my OS will not support older versions. I then downloaded Netsace Navigator 7.01 as indicated, but still did not get access.
 
Then I thought maybe if I can access the GUIvia the IPSU tool but I have Googled the Cisco IPSU and cannot find a downloadable link.

View 3 Replies View Related

Cisco :: Configure WPA Or WPA2 Authentication On 1042N Access Points?

Mar 12, 2012

I need to configure WPA or WPA2 authentication on cisco 1042N access points. But I believe that for this requirement I need to have either an internal or external RADIUS server, but my customer want to just a normal WPA/WPA2 authentication like what we configure on cisco WAP200 or WAP4410 accesspoints, is there any work arounds to configure WPA/WPA2 authentication in a simpler manner rather than configuring RADIUS server option?

View 2 Replies View Related

Cisco Wireless :: Configure Aironet 1100 Series AP?

Apr 1, 2013

I have very little practical knowledge of routers, switches and AP's. I recently got a very old Cisco Aironet 1100 series AP which was working fine in one network. I reset it and tried configuring it in new network (uses DHCP to assign public IP) for school use. But not able to access internet.

View 3 Replies View Related

Cisco Wireless :: Can't Configure Aironet 1142N With Web Interface

Jan 17, 2013

I have a Cisco 1142N configured in autonomous mode.I'm running on:Cisco IOS Software, C1140 Software (C1140-K9W7-M), Version 15.2(2)JA, RELEASE SO   FTWARE (fc1)
 
I can loggon to the web interface but it won't show me th expected status information.

View 2 Replies View Related

Cisco Wireless :: Aironet 3502I - How To Configure Device

May 14, 2012

I have a newly purchased Aironet 3502i that I would like to configure on my network.  I am new to Cisco networking in general, and would like to know how to configure the device to operate without a WLAN Controller.  

View 4 Replies View Related

Cisco Wireless :: Configure ASA 5505 And Aironet 1140 Multiple SSIDs?

Jan 10, 2012

I am in the process of installing an Aironet 1140 standalone AP. I have not worked with these AP's before. I will be connecting it to one of the PoE ports on the existing ASA 5505. My goal is to have 2 SSID's, one for internal network and one for guest internet only, no access to internal LAN. I want to have the internal wifi clients and the guest clients on seperate IP networks. The internal clients obtain DHCP from the existing server and use the ASA DHCP server for the guest clients. And of course, I would like the ability to manage the AP from the internal network. I am providing copies of my current configs for both the ASA and Aironet.

View 4 Replies View Related

Cisco Wireless :: Aironet 1130 AG - Unable To Enter Configure Mode

Sep 14, 2011

I just received a Cisco Aironet 1130 AG wi-fi router to configure and when I entered the router through console, I am not able to get into config mode. It says:

[code]....

View 9 Replies View Related

Cisco Wireless :: Aironet 600 OEAP / AP Is Able To Configure 2 Public IP Address Of DMZ-WLCs?

Dec 9, 2012

Does the AP is able to configure 2 public ip address of the DMZ-WLCs?
 
like ip 1.1.1.1 in my US data center, whereas a second ip 2.2.2.2 in my EU data center?

View 5 Replies View Related

Cisco Wireless :: Configure Multiple SSID On Aironet 3600i AP Via 2504 Controller

Apr 3, 2012

Can I configure Multiple SSID (Guest/Corporative) on Cisco Aironet 3600i AP via Cisco 2504 Wireless controller?

View 1 Replies View Related

Cisco ASA5505 And Wireless Access Points

May 31, 2011

We have a Cisco ASA5505 here that provides DHCP and routing to all our devices in our network. We also have a few other switches and wireless access points connected directly to the back of the ASA5505.For the past year all the wireless network signals has been working fine however starting last month, none of the wireless access points (we have three WRT54G) would allow proper connection (dropping connection, slow internet).I thought this maybe all THREE wireless access points are toast/bricked. So i went out and bought brand new Netgear WN604 and even with the new WAP i'm having same connectivity issues (really slow internet).When hardwired directly to the switches we get BLAZING fast internet & connectivity, no issues.

I called CISCO TAC and they automatically said "our ASA5505 is fine, it has to be your wireless access points" not working properly. I explained to them that i also purchased two brand new access points and they are doing the samething now, how can that be?

View 11 Replies View Related

Cisco Wireless :: WAP4410N Access Points Set Up

Apr 9, 2013

I've had some long standing issues that I've tried various things to fix.  I have two WAP4410N access points set up at a smaller sister company.  Wireless clients (laptops) are not receiving DHCP assigned IP addresses.  If I type in an IP manually, it works fine.The sister company has a point to point T-1 connection to our main building.  Our main building has the DHCP server.  The router on the sister company end is configured as the DHCP relay. 
 
I've upgraded the firmware three different times in the past to hopefully resolve the issue, but no luck.  Just today, on one of the WAP4410N's, I upgraded to the 2.0.6.1 firmware (backing up config, reset to factory default, upgraded firmware, reset factory default again, restored config).  After the first reset to factory defaults, the Access Point itself picked up a DHCP address from the server, and I verified this in the DHCP console on the server, so I know that the DHCP relay is working.  However, my laptop would not get a DHCP address when connecting wirelessly through that access point.  It is a Windows 7 Enterprise laptop.  I also could not get a DHCP IP with my iPhone connecting to wireless, to rule out specific issues with just a laptop.I have the DHCP lease times for the subnet that these WAP4410Ns are on set to 2 hours.
 
To put a cherry on top, there is one laptop that stays in a lab area at all times, connecting wirelessly, and it DOES get a DHCP IP address (I can see in the DHCP console that the lease for this laptop continually renews as needed).  I do remember on initial config when I couldn't get it to work, that I did a manual set up, gained connection, then switched it to DHCP...but that doesn't work for any other laptop.Why would the access points get DHCP address, but not anything connecting to the Access Points?

View 5 Replies View Related

Cisco Wireless :: CDP On Access Points 3502 Aps

Mar 15, 2012

Using WISM with 7.0.220 and 1240 and 3502 APs. Just found that some of our 3502 AP didn't enbale their clean air and CDP when installed. This only happened on a few new APs.  But the area these APs where we seem to have had a few problems with PCs. The only PCs effected where Computer On Wheels (COWs), Dell 780 Desktop with a Cisco Wireless Card.

Using an interl wireless card and others in thes areas worked.Once I enabled the CDP and Clean Air, the COWs worked.My question is with the APs not having CDP enabled, could this affect the cisco wirelss card in the COWs?

View 6 Replies View Related

Wireless :: Change Between Access Points?

Aug 30, 2012

At my school we have a lot of access points, but sometimes the computer use the wrong access point. How can I solve that? Is there a program for switching access point?

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved