Cisco Wireless :: Configure Multiple SSID On Aironet 3600i AP Via 2504 Controller

Apr 3, 2012

Can I configure Multiple SSID (Guest/Corporative) on Cisco Aironet 3600i AP via Cisco 2504 Wireless controller?

View 1 Replies


ADVERTISEMENT

Cisco Wireless :: C1131AG - Multiple SSID With Multiple VLANs Configuration On Aironet AP

Oct 21, 2012

how i can configure a second ssid for guest access in our environment. this is our network setup prior to this request: Internet----Firewall (not ASA)---ce520---C1131AG and CME router is also connecting to the ce520 switch. we only have two vlans: one for voice and two for data.
 
Presently, there is no vlan configured on the AP because it on broadcasting ont ssid and wireless users gets IP from a windows DHCP server on the LAN. the configuration on the ce520 switch port for the AP and other switches say access vlan is the DATA vlan which automatically becomes the native vlan for all trunk port connecting the AP and other Stiches to the network.
 
Now with this new requirement, i have made my research and i have configured the AP to broadcast both the production and the guest Vlans. The two vlans are 20-DATA and 60-Guest. I made the DATA vlan on the AP the native vlan since the poe switch is using the DATA vlan as native on the trunk ports. I configured the firewall to serve as DHCP server for the guest ssid and i have added the ip helper-address on the guest vlan interface on all switches while the windows server remains the dhcp server for the production DATA Vlan. I have confirmed that the AP, switches can ping the default gateway of the guest dhcp server which is another interface on the firewall. I can now see and connect to all broadcasted ssids but the problem is I am not getting IP addresses from both the production dhcp server and guest dhcp server when i connected to the ssid one at a time. My AP config is attached below.
 
Do i need to redesign the whole network to have a native vlan other nthan the data vlan? Does the access point need to be aware of the voice vlan? Do the native Vlan on the AP need to be in Bridge-group 1 or can i leave it in bridge-group 20?

View 1 Replies View Related

Cisco Wireless :: Setting Up Aironet 2600 APs With 2504 Controller

Mar 19, 2013

I've recently purchased a 2504 Wireless controller, and I have 10 2600 APs to deploy.  I think I've set up the wireless controller OK - there doesn't seem to be much that needs to be done!  But I just can't seem to register an AP onto the system.

Just to briefly outline what I have done, I have connected to the Wireless Controller via terminal emulator and run through the setup, then I have connected OK to the web interface, and I am able to view and amend the controller's configuration.  So I have setup a WLAN and thats about it.

Next up I have powered on one of my 2600 APs, and I am able to view it working via terminal emulator again.  But I am seeing it continually running the same routine to connect to a controller, and all the time it just fails.  Below is what I am seeing.
 
One thing that I am unsure about is that I am unable to connect to the AP config pages via web browser, using the IP 192.168.0.97 (although it does ping okay).  Is that odd?
 
And the main question - why doesn't the AP connect to the wireless controller?  Do the APs need to be authroized on the controller first?  If I check the controller's web interface, under Monitor - Statistics - AP Join, I can see the AP listed with Status "Not Joined" but I don't know what I need to do to make it join!
 
*Mar  1 02:28:54.579: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.*Mar  1 02:28:57.583: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination.*Mar  1 02:28:57.651: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 192.168.0.97, mask 255.255.255.0, hostname APb0fa.eb56.5abf(code)

View 12 Replies View Related

Cisco Wireless :: 2504 Controller With 3 Aironet 1142 Access Points

Mar 16, 2013

I have installed/setup a cisco 2504 wireless controller and 3 aironet 1142 access points using the basic config on a windows sbs 2008 domain, the problem is that the clients that are connected to the 2504 aint getting the there ip addr from the AD but from the wireless controller, and there cant reach the clients on wifi from the clients that are connected to lan, is there anyway that i cant change this so that a client on lan can see the client on wlan and vice versa.

View 5 Replies View Related

Cisco Wireless :: Multiple SSID In Aironet 1140?

Nov 18, 2012

I am using a Aironet 1100 series access point (AIR-AP1142N-N-K9) with IOS version c1140-k9w7-tar.124-21a.JA1. I want to create two seperate SSID's on the access point with WEP encryption. There is no VLAN configured and i want it to be like it. Also I need to broadcast both the SSID's at the same time, so the some of my users need to login with the first SSID and the others to login through the other.

View 2 Replies View Related

Cisco Wireless :: Configure Multiple SSID With Multiple VLANs And DHCP Pool WAP4410N

Sep 18, 2012

My question is if I can configure 3 ssid, for 3 different VLAN and add the DHCP address from a WAP4410N AP, when you upgrade to the latest version of IOS I can have this functionality?

View 2 Replies View Related

Cisco Wireless :: SSID / VLANs For Guest / Staff With 3600 And 2504 Controller?

May 2, 2012

We are deploying 3600 AP's with a 2504 and would like to create multiple SSID's that are mapped to unique VLANs so we can control the traffic at the Firewall.  We have the 2504 up and running with AP's but there appears to be no where in the 2504 controller Web GUI to configure a VLAN mapping to an SSID.  Any pointers to documentation on how to configure?

View 1 Replies View Related

Cisco Wireless :: Configure 2 SSID With WLC 2504 And LAP 1042n?

Nov 3, 2012

It,a possible configure 2 ssid with wlc 2504 and lap 1042n? It,s possible configure 2 ssid with support 802.11n?

View 1 Replies View Related

Cisco Wireless :: Multiple Aironet 1131AG Access Points And Same SSID?

Dec 22, 2009

We have multiple Cisco Aironet 1131AG devices, all wired on one Cisco L2 switch(2560)  who is connected to L3 switch (3550). We assigned one VLAN for access point in L3 switch who acts as vtp server (L2 switch is vtp client). All ap's will have static ip address and all will have same SSID and no security and they will be using multiple channels (ex. 1,6,11).  They will operate in 3 floor building for roaming wireless client. We won't using any wireless controller.

How to configure APs-all the same with different ip's, can we use L3 switch to create dhcp server for access points VLAN (pool for clients, and the rest for static ip for ap's)?

View 2 Replies View Related

Linksys Wireless Router :: E2500 - Configure Multiple SSID's?

Aug 15, 2012

I just bought a Linksys E2500, and I'm trying to configure multiple SSID's on it. The "guest mode" won't work for me because I want one SSID to use WPA and the other to use WEP, but the option to set different encryption based on the GHz frequency of the connection won't work for me because I only want the WEP one to be used by my Nintendo DS (which doesn't support WPA); I don't want to force ALL devices that don't support 5GHz to use the WEP one!

View 9 Replies View Related

Cisco Wireless :: Configure Multiple VLAN On Single SSID In 1142N

Apr 2, 2013

I have around 60 , 1142 N APs . As of now i have only management VLAN ( for IP ) & one user vlan 350 configured on the access point . All the users connect to VLAN 350 and they get IP as required.However in our new set up there are couple of requirements have come up were in SSID will be the same however we have created many VLANs for different kind of user group and all these VLANs should be mapped to this single SSID and pick the IPs from their respective VLANs .
 
We have done configuration on the RADIUS server side were in we have mapped the users in their respective VLANs and they are getting authenticated via AD . Now how do i map my these 4-5 VLANs in a single SSID in Access Point.

View 16 Replies View Related

Cisco Wireless :: Configure ASA 5505 And Aironet 1140 Multiple SSIDs?

Jan 10, 2012

I am in the process of installing an Aironet 1140 standalone AP. I have not worked with these AP's before. I will be connecting it to one of the PoE ports on the existing ASA 5505. My goal is to have 2 SSID's, one for internal network and one for guest internet only, no access to internal LAN. I want to have the internal wifi clients and the guest clients on seperate IP networks. The internal clients obtain DHCP from the existing server and use the ASA DHCP server for the guest clients. And of course, I would like the ability to manage the AP from the internal network. I am providing copies of my current configs for both the ASA and Aironet.

View 4 Replies View Related

Cisco :: Configure Aironet 3500i Without WLC Controller?

Nov 30, 2011

if i can configure the cisco aironet 3500i without WLC controller.

View 1 Replies View Related

Cisco Wireless :: 5508 Assign Single Ssid To Multiple Interface Groups By Assigning Ssid To Multiple AP Groups

Aug 26, 2012

Is it possible to assign a single ssid to multiple interface groups by assigning the ssid to multiple AP groups? 
 
I have buildings geographically dispersed that are configured with multiple vlans in interface groups so that I can maintain an addressing scheme of dhcp assigned addresses per building.  Each building is also further grouped as AP groups.  I'd like to know if by assigning the same wlan ssid to each of the AP groups, will I maintain addressing integrity for each building?  I'm thinking it will work.
 
Do the buildings have to be outside AP range of each other to avoid problems?

5508 controller
7.2.110.0  code
6 buildings
6 interface groups
1 ssid

View 4 Replies View Related

Cisco Wireless :: 2504 - Creating Web Portal For Some SSID (Guest And Staff)

Jan 17, 2013

My customer need creates some separately web portal for some SSID (Guest and Staff), 01 web portal for Guest and 01 Web portal for Staff. Can WLC2504 can support this features ?

View 2 Replies View Related

Cisco Wireless :: Cannot Connect To Second SSID On Aironet 1231

Apr 22, 2013

I have configure my AP with to SSID (11 & 12), but I cannot connect to 12. It authenticates, and while trying to acquire IP address from 12, it fails and connects me to 11 (if I have already saved the SSID connection).
 
The following is my AP status:Product/Model Number:AIR-AP1231G-A-K9 System Software Filename:c1200-k9w7-tar.123-8.JEE System Software Version:12.3(8)JEE Bootloader Version:12.3(2)JA4  
 
The SSID 12 already have 4 clients connected, And I am tring to connect a 5th one (smart phone), but cannot connect to 12, instead coneected to 11. Also tried with a laptop, but cant get the IP address, and give Limited Connectivity error.

View 3 Replies View Related

Cisco Wireless :: Aironet 1142 Not Broadcasting SSID?

Sep 28, 2012

I configured the device manually, not even using Express Setup or Express Security setup so... it is possible I missed something.Anyway, here's the problem. Although the SSID is configured as "AP1", this SSID does not appear among available networks on the client laptop.
 
The connection, configured in Group Policy for the client, should actually happen automatically, based on the SSID, but since the SSID is not being broadcast, that connection is failing as well.
 
The Aironet does appear among the available networks as "Other Network" and if I click on "connect" I am prompted to enter the SSID -> AP1
 
Although, unexplicably, an error message displays (Windows cannot connect to the network, or something to that effect), the laptop *does* connect once I close that window. Network access is complete and functional - I can ping other hosts, etc..
 
I'd post screenshots but not knowing what setting is missing or incorrect, I'd have to print dozens. So here's the sh run output of the AP obtained via telnet (just below). This is a test network so all information is "real" (nothing changed for privacy):
 
Note: I even changed the hostname to "AP1" (it's still LAB1 below) but that did not resolve the problem (did not think it would).
 
LAB1#sh runBuilding configuration...
Current configuration : 2321 bytes!version 12.4no service padservice timestamps debug datetime msecservice timestamps log datetime msecservice password-encryption!hostname LAB1!logging rate-limit console 9enable secret 5 $1$9EWD$kxrbg8KxikRFypOieKiZh/!aaa new-model!!

[Code]....

View 5 Replies View Related

Cisco Wireless :: 2504 / Assign SSID To Interface That Has Dynamic AP Management Enabled?

Jan 3, 2012

I am tasked with configuring a 2504 wireless controller.  Is it possible to assign an SSID to an interface that has dynamic ap management enabled?

Scenario:
Location1:
1) 10.0.0.0/24
2)192.168.0.0/24 DMZ
 Location 2:
1) 10.0.5.0
 
Both locations are routable using network 1 at each location.  However, I need to configure several access points and send them to location 2.  These access points will communicate with the controller at location 1 on network 1.  Two SSIDs will need to be on network 1 at location 1.  The other SSID will be on Network 2 at location 1.  This network is not routable. 

View 32 Replies View Related

Cisco Wireless :: DHCP Error With WLC 2504 And Aironet 2600 Setup Across Subnets

Apr 2, 2013

I have just setup a new WLC 2504 controller to manage a WiFi service that will span 6 geographic locations.  The local networks at each location are on different subnets (all 192.168.x.x) and are linked up via IPSEC VPN links, and there is Active Directory spanning the sites, with DNS and DHCP servers running at each location.
 
I tested the WLC at our main office with a single AP, and it worked fine.  The AP set itself up, and wireless devices connect with no probs. Great!  Yesterday I headed out to one of our remote sites, and connected an AP to their network - and that seemed to work fine too.  Within a few minutes I was able to see the WiFi network I'd setup, and my smartphone connected to it straight away (as I'd rpeviously connected at the main office), so I was pretty happy that all was working well.
 
This morning however I've had notification that wifi performance at the remote site isn't great.  I've got someone to check their ip address, and I've found that their IP address and default gateway match the LAN at the main office where the WLC is based - NOT the LAN where the wireless client is.  Obvioulsy this is not ideal!
 
(I guess I HAVE done something wrong!?).  And how can I get wireless clients at remote sites to pick up an IP from the DHCP server at THEIR site?

View 3 Replies View Related

Cisco Wireless :: Change SSID Name On Aironet 1200 Currently Used By Network

Jan 25, 2012

I'd like to change the SSID name on Aironet 1200 which is currenty used by my wireless network.

View 3 Replies View Related

Cisco :: Configuring AP1121G-E-K9 For Multiple SSID With Multiple VLAN?

May 28, 2013

i`m facing a problem configuring the mentioned access point to act as stand alone access point with multiple SSID assigned to differnet VLANs the problem is that

1) i`m not able to broadcast the both SSIDs in the same time from the Access point

2) i need to make the radius server to manage the SSID access for the wireless clients (trying to find a way in which the aceess point sends a log for the radius server containing the VLAN id /IP address of the the SSID) you may find the below info about the IOS ver. & the configuration?
 
i`m running IOS /c1100-k9w7-mx.123-8.JEE/c1100-k9w7-mx.123-8.JEE?

View 2 Replies View Related

Cisco Wireless :: Adding A Second 2504 AP Controller

Aug 2, 2012

I currently have a single 2504 Controller managing 50 AP's.  I am adding a Second 2504 AP Controller with 15 Lic to manage an additional 10 AP's.  My current 2504 has each port configured for my four subnets that and it is managing AP's in 4 buildings.  Should I configure the new 2504 the same way so that it can see all four sites?  All so if the main 2504 goes down can the second 2504 take over even thou we will be out of lic?

View 7 Replies View Related

Cisco Wireless :: Upgrade Controller 2504 From 7.0 To 7.4?

Jun 16, 2013

upgrade on the wireless controller 2504  from 7.0 to 7.4 is direct upgrade.My customer  faced problem by upgrading the software 7.0 to 7.4 directly and the image hang.how should proceed recover the image 7.4/

View 7 Replies View Related

Cisco Wireless :: 2504 Controller - Can AP Be Set With Static Channels

Nov 11, 2012

We have a Cisco 2504 controller and approximately 35 AP's. Some of the AP's are located directly above each other (on another floor). When I run a basic annalyzer, it appears that there is some adjacent AP traffic, the controller has some of the close AP's with the same channel, so there is some RF interferance. The AP's currently are all setup for "G" and majority of the AP's are 1200 series, most of them are 1242's. Should and can the AP's be set with static channels so that there is no adjacent signals? If so where in the controller can that be done?

View 3 Replies View Related

Cisco Wireless :: 3602 AP Cannot Join 2504 Controller

Oct 16, 2012

This is a new setup and has not worked yet. I have multiple 3602 APs and one 2504 Controller. I thought initially I could plug-in an AP into one of two POE Ports on the 2504. During debug mode I see that it has low power, was suprised that the 2504 switch can't fully power the AP? Is this correct?Anyways I have another POE switch that I am using with ample power. The configuration for my wireless is that it will be completely segmented off of my internal network as this is for guest access. So DNS servers are external so I cannot create host entries for the AP to discover the controller. With that being said I believe that is just one way for the discovery process to happen. I have my controller management interface and DHCP scope on the controller on the same subnet plugged into the same POE switch. The AP does seem to get a DHCP address and I can ping the controller from the AP. I cannot get any further then that. I will not join the controller and the radios get disabled. I get messages such as "discovery response from MWAR is rejected. I will post a debug log of the AP and its bootup process. This is new equipment so I would assume the firmware is somewhat up-to-date and the 3602 AP is somewhat the latest model.

View 3 Replies View Related

Cisco Wireless :: 2504 Controller - Best Way To Have Internet Only Wi-Fi Network

Nov 29, 2012

Our current way of configuration for this is standalone ap's with multiple ssid's. The main network ssid's are on the 10.0.0.0 networks. The internet only ssid is on the 192.168.1.0 network. ( this is a wireless network only,no wired) They all get there dhcp address from a layer 3 switch. To prevent the wireless 192.168.1.0 intenet only network from getting to the 10.0.0.0 networks, we just put a simple source & destination deny acl on the in vlan interface of the 192.168.1.0 network on the layer 3 switch.Now that we are impementing a Cisco 2504 controller, the management and ap manger are both on the 10.0.0.0 network.( both on port 1 with dynamic ap manager enabled)  I can setup as many ssid's on the 10.0.0.0 network and they all work fine. But when I setup the 192.168.1.0 internet only ssid it will not connect. I'm assuming that its because the 192.168.1.0 network or anyone trying to connect and use that network has to go through the controller located on the 10.0.0.0 network. I'm thinking that the acl on the vlan interafce is the problem.So, if I'm correct, what is the best way to setup a separate internet only network through the private networks?

View 7 Replies View Related

Cisco Wireless :: Does 2504 Controller Support CAD Or JPG Drawings

Jun 11, 2013

Does the 2504 Wireless Controller support cad or jpg drawings? I have not been able to find in any of the menus.

View 1 Replies View Related

Cisco Wireless :: Enabling Netflow On A 2504 Controller?

Feb 28, 2013

I just completed setting up a AIR-CT2504-K9 controller with 9 APs with RADIUS on the private WLAN and an open guest WLAN; I want to enable netflow exports to a collector, but see no place in the GUI to do this and no obvious CLI commands.

View 1 Replies View Related

Cisco Wireless :: 2504 Controller Association Latency

May 21, 2013

-WLC 2504
-AP1602
-SW  7.4.100.0
 
We have 22 x AP1602.5 of them show up in the WLC with Controller Association Latency of around 1 minute and 10 seconds.The other 17 all have latency around 10 seconds.
 
1. What are possibile causes for high value of association latency?

2. Could high-value association latency be an indication of badly working wifi for data traffic?

View 1 Replies View Related

Cisco Wireless :: 2504 Controller - How To Generate Graphs

May 19, 2013

I'm supporting a 2504 wireless controller with 3 aps in a health clinic.  I'm interested in generating some useful information for the owners of the device such as radio utilization (It'd be really nice if there were some graphs). how I can generate these graphs without SNMP monitoring or something like Cisco Prime Infrastructure?

View 4 Replies View Related

Cisco Wireless :: Migration 2106 To 2504 Controller?

Jan 6, 2013

I have a question to migrate a customer from a 2106 controller to a 2504 controller. Can I use the configuration file with both controllers having the same version?
 
Or is there another way not having to do it again manually? The old configuration is OK, only the hardware is end of sale.

View 19 Replies View Related

Cisco Wireless :: Not Able To Get DHCP IP Via 2504 WLAN Controller

Jan 7, 2013

I have a Cisco Wlan Controller 2504 with 1042N AP (3-nos) every thing was working fine from past 2 months. Now i am getting a issue with clients which are connected to the wireless AP, they are not able to get an dhcp IP address from the 2960 Switch (DHCP Server). The clients are getting IP address as 0.0.0.0. [code]

View 36 Replies View Related

Cisco Wireless :: WLC 2504 - Setup Guest Wi-Fi On Controller?

Jun 4, 2012

I have setup guest access on the controller and this is not working at the moment.
 
DHCP server setup on the controller for the Guest users.
 
You are able to connect (get ip address from controller) and the browser gets redirected to 1.1.1.1 but then page can not be displayed instead of the login page.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved