We have a Cisco ASA 5520 and use the Cisco VPN Client a lot, but I can't seem to to get Android phones to connect (Ice Cream Sandwich OS), it seems to want use Anyconnect
View 2 RepliesEvery device I've tried to connect to my WiFi network have no issues connecting at all, except for, as far as I can tell, Samsung Android phones. My sample set is very small, but both a Samsung Galaxy S3 (both before and after custom ROM install) and a stock Samsung Galaxy Nexus.
I've tried setting a vlan up with no encryption and open authentication, and the phones just halt on "connecting". This issue is both on the 2.4Ghz and 5Ghz Radios.
What is working is various computers with both intel and broadcom adapters, a Brother printer, and a Motorola Droid 3 and Motorola Photon Q. I'm starting to think that it's an issue with the radio in the Samsung phones, but the S3 is 5ghz compatible and the Nexus is only 2.4, so they must have different radios. I'm also pretty sure that it's not software on the phones since the S3 had the same problem with stock ROM and CM 10, and the Nexus is Vanilla Google ROM.
I'm waiting to get a chance to upgrade to the new FW for my aironet 1040, and I'm going to fire up an old 1130AG as well as test with an iphone or ipod when I get the chance; I'd just really like to find out what the heck is going on with these samsung phones.
Current configuration : 13969 bytes
!
! Last configuration change at 10:18:26 MST Sun Dec 23 2012
! NVRAM config last updated at 10:18:26 MST Sun Dec 23 2012
[Code].....
Android users can connect to our hospital guest wireless but will not have connectivity. Our wireless infrastructure is WISM based with 2 controllers on 6509 platform. We have a mixed environment of 1231, 1252 & 3502 series APs.
Had issue connecting just Android devices? All other devices connect fine.
I have an issue with a brand new E4200 router. My E4200 can connect no issue with the following devices: Ipad, AppleTV, Dell Laptop, Ibm Laptop. It is also wired connected to my home PC. Internet works fine and file sharing/network works good for all the above devices.
The problem is that My wife and I's Phone can not detect the wifi network and can not connect to it. The SSID broadcast is enabled on both frequencies (2.4 and 5). I have try configuring the network manually on both the Android phones..it does not work.. it records the data but keep sayng the network is out of range (although I'm right next to the router). I hva eplayed with various channels on both frequecies and played also with the MTU size.One of the Android phone is Garmin the other Acer Liquid...different brand running both Android 2.2...
Firmware on E4200 is 1.0.02
All settings reset to Auto/MIxed for now.
WPA2 is enable with security key
SSID is enabled on both frequency
no MAC address filtering is setup
Both my phones can detect other networks and can connect fine to friends and family networks...So I suspect a compatibility problem between router an Android..I have contacted Linksys support twice with no avail. I have contacted both Acer and Garmin...they refer me to linksys
I got f9k1001v3 (n150) router, My problem is that I can't upload photos from my xperia p wirelessly. I tried to other connections (wifi) even on 3G and I can upload on instagram or fb.
View 3 Replies View RelatedI have a CUCM BE environment with a number of remote users with 8961 phones connecting to an ASA 5501 via AnyConnect. The phones register fine and can make inbound/outbound calls as well as four digit dialing to other users at the corporate site.
The problem is when a remote user tries to four digit dial another remote phone. The called phone will ring but there is dead air once answered and then the line goes dead.
This sounds like a routing issue to me. How to get AnyConnect clients to be able to reach each other?
how to connect wifi on mobile phone? how it works? my handset is LG T310i having wifi facility
View 1 Replies View RelatedI have pretty much the EXACT same issue. Revo 3700, Sky Unlimited Broadband, and a bunch of laptops and phones that can connect to the internet anywhere in the house without a probleI had the Revo connect all day last Friday (for the first time), prior to that it had connected a hand full of times, but only a very slow connection. For the last 4 days it hasn't connected at all, but says the signal strenth is 4 or 5 bars. I'm typing this from right next to the Revo on my laptop without any issue.
View 4 Replies View RelatedI'm trying to connect an android tablet (asus transformer) to my ASA5510 ver 8.4(2)I successfully configured to have "PHASE 2 COMPLETED"
But my droid give the message "user or password incorrect" and vpn isn't established.I use local AAA authentification.On the debug, I don't see anything or can't find the appropriate debug. [code]
I just got a maylong 4.0 android tablet. The instuctions are vague on how to set up an internet connection.
View 2 Replies View RelatedI received my upgrade yday from shop. I'm using galaxy 11s but have now galaxy 111 x my 11s is still connected to fone as hubby got it but I can't get wifi on new fone x iv sky broadband. does it take 24 hrs or what's wrong.
View 1 Replies View RelatedI just purchased a Toshiba Thrive tablet and I can't get it to connect to my wireless router. My router (WRVS4400N) works flawlessly with my laptop and desktop. I have spoken to a Cisco tech rep and they assured me that there is not a compatibility problem with the WPA-Personal setting I am using. When I speak to a Toshiba tech they tell me I have a router conflict. To verify this I went to my local Starbucks and low and behold it logged right on with no problem (The Starbucks system was not a protected system). This confirms to me that there is a conflict between the router and the tablet.Toshiba tells me that it is not compliant with Android but it is with Windows that is why I don't have an issue with the computers.
View 2 Replies View RelatedI need to connect my laptop with android phone thru Wi-Fi. I have created ad hoc WEP connection in my laptop. Now, the signal strength in my laptop Wi-Fi shows "no signal". Therefore , my phone is not detecting the ad hoc connection which I have created.
View 6 Replies View Relatedi am having LAN connection to my laptop with registered in main data base, so i can't use my mobile using a same username to WiFi.Bluetooth/ USB connection between Laptop lan Internet to my Samsung Galaxy i551 android 2.2 mobile, so that i can access internet in my mobile without WiFi registration.
View 5 Replies View Relatedi have purchased a 2.2 android tablet everything works fine apart from internet access tablet scans finds my sky router tap on connect enter password which i have double checked starts to connect then says disconnected and disabled is this a security issue with the router or conflict with the tablet desktop connects great and also wii.
View 1 Replies View RelatedCan i connect my android mobile for internet by using internet from laptop.
View 1 Replies View Relatedhow to connect to internet using my android phone.
View 1 Replies View RelatedI Want To Connect My Android Phone To My PC For Internet.
View 1 Replies View RelatedI'm trying to connect to my wireless network using an android device with certificate but with no success.I'm using a WLC4402 7.0.235.3 SSID Security (WPA2 Auth802.1X + CCKM) [code]
View 7 Replies View RelatedI am using acer notebook aspire one ,i cant connect to internet in android
View 2 Replies View RelatedI cannot connect my new Filemate Clear android tablet to the internet. No problem connecting laptops. I keep getting this message, authentication problem after trying to connect.
View 1 Replies View RelatedMy mother in law bought my daughter a impression android tablet for Christmas it connects fine at public hotspots but I can not get it to connect to our wrt120n router at home. I have tried everything I know to add it. It asks for the password then says getting IP address then disconnects.
View 2 Replies View RelatedI have a new android, MyTouch Q, through T-mobile. The phone says it is connected and the wireless icon appears, but I can't access any data or websites. I've done a hard reset, unplugged both the router and the modem for several minutes, called the phone manufacturer (LG), the carrier (t-mobile), and the internet provider (Cox cable).
View 3 Replies View RelatedI have an Adroid 2.3.1 tablet, a WRT160N router, and an ActionTec M1000 DSL modem. I have many devices, both wired and wireless, connected and all work fine. These include xBox (Port Triggering in place) and 2 laptops via wireless and 3 machines wired.For some reason the Android tablet will not connect. It does connect to other WIFI spots including neighbors, cafes, etc. For this reason I believe the issue is with the router.I have tried all sorts of things including:
Change advanced wireless settings (Beacon Interval, Fragmentation Threshold, RTS Threshold)Tried B, G, B&G, B/G/NTried WEP, WPA, WPA2Tried Channel 1, 6, 11.Reset the router (via reset button, via Factory Defaults option, Reboot, power off 10 secs, back on)Updated router firmware to latestUpdated tablet firmware to latestTried enabling MAC Address filteringAt one time I saw messages in the DHCP log wherein it was trying to register and I noticed the MAC Address doesn't match what the tablet says it has. Now I can't even get that. It says "Connecting", a few seconds then "Disconnected".I am now forced to consider getting a new router. If I can't get this resolved, the new one will not be manufactured by Cisco.
My phone and my friends phones can connect to the wifi but I cannot receive nor send data from it. The phones work completely fine elsewhere. Here is the kicker, my computer works completely OK on the router and my phone used to work for 3-4 hours before this issue started going again. Now it is constantly. I restarted the modem, default reset it and still nothing. I get an IP address too and it stays connected. Cisco thinks its the phone, but its multiple phones that are having the problem and my phone and other works completely fine at other places.
View 7 Replies View RelatedI have a samsung galxy 5 phone.. with ANDROID 2.1 installed in it.. I wan2 access internet thru wi-fi on my mobile. I have got myself a wireless router at home. the wi-fi settings page of my phone says that i am connected to the network i wanna connect to... but when i try 2 access any website thru d browser , it displays page not found..
View 4 Replies View RelatedI setup an accespoint on my laptop. Now I want to connect my Phone (android) to this network but, he is asking for an Ip-address I tried the following;
- give the phone a static ip address
I cannot connect Android Tablet to home WiFi. Getting Authentication Problem" as error.All other devices connected. Have tried all of the solutions on this and other sites
View 3 Replies View RelatedI just purchased a Toshiba Thrive tablet and I can't get it to connect to my wireless router. My router (WRVS4400N) works flawlessly with my laptop and desktop. I have spoken to a Cisco tech rep and they assured me that there is not a compatibility problem with the WPA-Personal setting I am using. When I speak to a Toshiba tech they tell me I have a router conflict. To verify this I went to my local Starbucks and low and behold it logged right on with no problem (The Starbucks system was not a protected system). This confirms to me that there is a conflict between the router and the tablet.
View 1 Replies View RelatedI installed DD-WRT on my router and placed it in bridge mode, configuring it with what I thought was my Androids IP address for the gateway. I tried with the Android IP address identified through cmyip.org, 208.54.32.156, and with the one identified through ipconfig command, 192.168.43.1. Neither address was successful. Also, I am unable to access my router using the IP address that I manually assigned to it.provide some assistance on the process of bridging from an Android to a wired PC through a router, Linksys WRT54G v3,
View 1 Replies View Relatedi am working on a project with 2 security ASA's 5520 with Microsoft ISA/TMG-2010 Server having 2 DSL's my question is regarding the designing issue where should i connect the 2 DSL's using ISA/TMG-2010..
View 1 Replies View RelatedJust need to know where I can set a Max connect time so users dont camp on the ASA when they are not using it.
View 8 Replies View RelatedI' trying to access my Gmail account from my IP Phone (Cisco IP Communicator, don't have an actual device at the moment). The services work greatly (I tested berbee services and they work fine) I came across the Gmailcheck service. [URL] I downloaded all the files and added the "statusMsg.php" in my services list. Now when selecting Gmailcheck on the IP Communicator, it just shows the PHP code script : No interface, no gmail...
So I'd like to know : How to do to make this PHP script work ? Or is there a better way to access my Gmail accounts ?